ide: remove [ata_]select_t
[safe/jmp/linux-2.6] / drivers / ide / pci / sc1200.c
index 1a1c0ef..79eeead 100644 (file)
@@ -1,6 +1,4 @@
 /*
- * linux/drivers/ide/pci/sc1200.c              Version 0.97    Aug 3 2007
- *
  * Copyright (C) 2000-2002             Mark Lord <mlord@pobox.com>
  * Copyright (C)      2007             Bartlomiej Zolnierkiewicz
  *
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
 #include <linux/pm.h>
+
 #include <asm/io.h>
-#include <asm/irq.h>
+
+#define DRV_NAME "sc1200"
 
 #define SC1200_REV_A   0x00
 #define SC1200_REV_B1  0x01
@@ -87,7 +80,7 @@ static const unsigned int sc1200_pio_timings[4][5] =
 static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
 {
        ide_hwif_t *hwif = drive->hwif;
-       struct pci_dev *pdev = hwif->pci_dev;
+       struct pci_dev *pdev = to_pci_dev(hwif->dev);
        unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
 
        pci_read_config_dword(pdev, basereg + 4, &format);
@@ -110,17 +103,19 @@ static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
 static u8 sc1200_udma_filter(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
-       ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
-       struct hd_driveid *mateid = mate->id;
+       ide_drive_t *mate = ide_get_pair_dev(drive);
+       u16 *mateid = mate->id;
        u8 mask = hwif->ultra_mask;
 
-       if (mate->present == 0)
+       if (mate == NULL)
                goto out;
 
-       if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
-               if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+       if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+               if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+                   (mateid[ATA_ID_UDMA_MODES] & 7))
                        goto out;
-               if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+               if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+                   (mateid[ATA_ID_MWDMA_MODES] & 7))
                        mask = 0;
        }
 out:
@@ -130,73 +125,41 @@ out:
 static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
 {
        ide_hwif_t              *hwif = HWIF(drive);
-       int                     unit = drive->select.b.unit;
+       struct pci_dev          *dev = to_pci_dev(hwif->dev);
        unsigned int            reg, timings;
        unsigned short          pci_clock;
        unsigned int            basereg = hwif->channel ? 0x50 : 0x40;
 
+       static const u32 udma_timing[3][3] = {
+               { 0x00921250, 0x00911140, 0x00911030 },
+               { 0x00932470, 0x00922260, 0x00922140 },
+               { 0x009436a1, 0x00933481, 0x00923261 },
+       };
+
+       static const u32 mwdma_timing[3][3] = {
+               { 0x00077771, 0x00012121, 0x00002020 },
+               { 0x000bbbb2, 0x00024241, 0x00013131 },
+               { 0x000ffff3, 0x00035352, 0x00015151 },
+       };
+
        pci_clock = sc1200_get_pci_clock();
 
        /*
         * Note that each DMA mode has several timings associated with it.
         * The correct timing depends on the fast PCI clock freq.
         */
-       timings = 0;
-       switch (mode) {
-               case XFER_UDMA_0:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00921250;   break;
-                               case PCI_CLK_48:        timings = 0x00932470;   break;
-                               case PCI_CLK_66:        timings = 0x009436a1;   break;
-                       }
-                       break;
-               case XFER_UDMA_1:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00911140;   break;
-                               case PCI_CLK_48:        timings = 0x00922260;   break;
-                               case PCI_CLK_66:        timings = 0x00933481;   break;
-                       }
-                       break;
-               case XFER_UDMA_2:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00911030;   break;
-                               case PCI_CLK_48:        timings = 0x00922140;   break;
-                               case PCI_CLK_66:        timings = 0x00923261;   break;
-                       }
-                       break;
-               case XFER_MW_DMA_0:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00077771;   break;
-                               case PCI_CLK_48:        timings = 0x000bbbb2;   break;
-                               case PCI_CLK_66:        timings = 0x000ffff3;   break;
-                       }
-                       break;
-               case XFER_MW_DMA_1:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00012121;   break;
-                               case PCI_CLK_48:        timings = 0x00024241;   break;
-                               case PCI_CLK_66:        timings = 0x00035352;   break;
-                       }
-                       break;
-               case XFER_MW_DMA_2:
-                       switch (pci_clock) {
-                               case PCI_CLK_33:        timings = 0x00002020;   break;
-                               case PCI_CLK_48:        timings = 0x00013131;   break;
-                               case PCI_CLK_66:        timings = 0x00015151;   break;
-                       }
-                       break;
-               default:
-                       BUG();
-                       break;
-       }
 
-       if (unit == 0) {                        /* are we configuring drive0? */
-               pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
+       if (mode >= XFER_UDMA_0)
+               timings =  udma_timing[pci_clock][mode - XFER_UDMA_0];
+       else
+               timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
+
+       if ((drive->dn & 1) == 0) {
+               pci_read_config_dword(dev, basereg + 4, &reg);
                timings |= reg & 0x80000000;    /* preserve PIO format bit */
-               pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
-       } else {
-               pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
-       }
+               pci_write_config_dword(dev, basereg + 4, timings);
+       } else
+               pci_write_config_dword(dev, basereg + 12, timings);
 }
 
 /*  Replacement for the standard ide_dma_end action in
@@ -204,7 +167,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
  *
  *  returns 1 on error, 0 otherwise
  */
-static int sc1200_ide_dma_end (ide_drive_t *drive)
+static int sc1200_dma_end(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = HWIF(drive);
        unsigned long dma_base = hwif->dma_base;
@@ -251,9 +214,10 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
        }
        if (mode != -1) {
                printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
-               hwif->dma_off_quietly(drive);
-               if (ide_set_dma_mode(drive, mode) == 0)
-                       hwif->dma_host_on(drive);
+               ide_dma_off_quietly(drive);
+               if (ide_set_dma_mode(drive, mode) == 0 &&
+                   (drive->dev_flags & IDE_DFLAG_USING_DMA))
+                       hwif->dma_ops->dma_host_set(drive, 1);
                return;
        }
 
@@ -261,137 +225,101 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
 }
 
 #ifdef CONFIG_PM
-static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
-{
-       int     h;
-
-       for (h = 0; h < MAX_HWIFS; h++) {
-               ide_hwif_t *hwif = &ide_hwifs[h];
-               if (prev) {
-                       if (hwif == prev)
-                               prev = NULL;    // found previous, now look for next match
-               } else {
-                       if (hwif && hwif->pci_dev == dev)
-                               return hwif;    // found next match
-               }
-       }
-       return NULL;    // not found
-}
-
-typedef struct sc1200_saved_state_s {
-       __u32           regs[4];
-} sc1200_saved_state_t;
-
+struct sc1200_saved_state {
+       u32 regs[8];
+};
 
 static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
 {
-       ide_hwif_t              *hwif = NULL;
-
        printk("SC1200: suspend(%u)\n", state.event);
 
+       /*
+        * we only save state when going from full power to less
+        */
        if (state.event == PM_EVENT_ON) {
-               // we only save state when going from full power to less
-
-               //
-               // Loop over all interfaces that are part of this PCI device:
-               //
-               while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
-                       sc1200_saved_state_t    *ss;
-                       unsigned int            basereg, r;
-                       //
-                       // allocate a permanent save area, if not already allocated
-                       //
-                       ss = (sc1200_saved_state_t *)hwif->config_data;
-                       if (ss == NULL) {
-                               ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
-                               if (ss == NULL)
-                                       return -ENOMEM;
-                               hwif->config_data = (unsigned long)ss;
-                       }
-                       ss = (sc1200_saved_state_t *)hwif->config_data;
-                       //
-                       // Save timing registers:  this may be unnecessary if 
-                       // BIOS also does it
-                       //
-                       basereg = hwif->channel ? 0x50 : 0x40;
-                       for (r = 0; r < 4; ++r) {
-                               pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
-                       }
-               }
+               struct ide_host *host = pci_get_drvdata(dev);
+               struct sc1200_saved_state *ss = host->host_priv;
+               unsigned int r;
+
+               /*
+                * save timing registers
+                * (this may be unnecessary if BIOS also does it)
+                */
+               for (r = 0; r < 8; r++)
+                       pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
        }
 
-       /* You don't need to iterate over disks -- sysfs should have done that for you already */ 
-
        pci_disable_device(dev);
        pci_set_power_state(dev, pci_choose_state(dev, state));
-       dev->current_state = state.event;
        return 0;
 }
 
 static int sc1200_resume (struct pci_dev *dev)
 {
-       ide_hwif_t      *hwif = NULL;
-
-       pci_set_power_state(dev, PCI_D0);       // bring chip back from sleep state
-       dev->current_state = PM_EVENT_ON;
-       pci_enable_device(dev);
-       //
-       // loop over all interfaces that are part of this pci device:
-       //
-       while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
-               unsigned int            basereg, r;
-               sc1200_saved_state_t    *ss = (sc1200_saved_state_t *)hwif->config_data;
-
-               //
-               // Restore timing registers:  this may be unnecessary if BIOS also does it
-               //
-               basereg = hwif->channel ? 0x50 : 0x40;
-               if (ss != NULL) {
-                       for (r = 0; r < 4; ++r) {
-                               pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
-                       }
-               }
-       }
-       return 0;
-}
-#endif
-
-/*
- * This gets invoked by the IDE driver once for each channel,
- * and performs channel-specific pre-initialization before drive probing.
- */
-static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
-{
-       if (hwif->mate)
-               hwif->serialized = hwif->mate->serialized = 1;
+       struct ide_host *host = pci_get_drvdata(dev);
+       struct sc1200_saved_state *ss = host->host_priv;
+       unsigned int r;
+       int i;
 
-       hwif->set_pio_mode = &sc1200_set_pio_mode;
-       hwif->set_dma_mode = &sc1200_set_dma_mode;
+       i = pci_enable_device(dev);
+       if (i)
+               return i;
 
-       hwif->drives[0].autotune = 1;
-       hwif->drives[1].autotune = 1;
+       /*
+        * restore timing registers
+        * (this may be unnecessary if BIOS also does it)
+        */
+       for (r = 0; r < 8; r++)
+               pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
 
-       if (hwif->dma_base == 0)
-               return;
+       return 0;
+}
+#endif
 
-       hwif->udma_filter = sc1200_udma_filter;
-       hwif->ide_dma_end   = &sc1200_ide_dma_end;
+static const struct ide_port_ops sc1200_port_ops = {
+       .set_pio_mode           = sc1200_set_pio_mode,
+       .set_dma_mode           = sc1200_set_dma_mode,
+       .udma_filter            = sc1200_udma_filter,
+};
 
-        hwif->ultra_mask = 0x07;
-        hwif->mwdma_mask = 0x07;
-}
+static const struct ide_dma_ops sc1200_dma_ops = {
+       .dma_host_set           = ide_dma_host_set,
+       .dma_setup              = ide_dma_setup,
+       .dma_exec_cmd           = ide_dma_exec_cmd,
+       .dma_start              = ide_dma_start,
+       .dma_end                = sc1200_dma_end,
+       .dma_test_irq           = ide_dma_test_irq,
+       .dma_lost_irq           = ide_dma_lost_irq,
+       .dma_timeout            = ide_dma_timeout,
+};
 
-static ide_pci_device_t sc1200_chipset __devinitdata = {
-       .name           = "SC1200",
-       .init_hwif      = init_hwif_sc1200,
-       .host_flags     = IDE_HFLAG_ABUSE_DMA_MODES | IDE_HFLAG_POST_SET_MODE |
-                         IDE_HFLAG_BOOTABLE,
+static const struct ide_port_info sc1200_chipset __devinitdata = {
+       .name           = DRV_NAME,
+       .port_ops       = &sc1200_port_ops,
+       .dma_ops        = &sc1200_dma_ops,
+       .host_flags     = IDE_HFLAG_SERIALIZE |
+                         IDE_HFLAG_POST_SET_MODE |
+                         IDE_HFLAG_ABUSE_DMA_MODES,
        .pio_mask       = ATA_PIO4,
+       .mwdma_mask     = ATA_MWDMA2,
+       .udma_mask      = ATA_UDMA2,
 };
 
 static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       return ide_setup_pci_device(dev, &sc1200_chipset);
+       struct sc1200_saved_state *ss = NULL;
+       int rc;
+
+#ifdef CONFIG_PM
+       ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+       if (ss == NULL)
+               return -ENOMEM;
+#endif
+       rc = ide_pci_init_one(dev, &sc1200_chipset, ss);
+       if (rc)
+               kfree(ss);
+
+       return rc;
 }
 
 static const struct pci_device_id sc1200_pci_tbl[] = {
@@ -404,6 +332,7 @@ static struct pci_driver driver = {
        .name           = "SC1200_IDE",
        .id_table       = sc1200_pci_tbl,
        .probe          = sc1200_init_one,
+       .remove         = ide_pci_remove,
 #ifdef CONFIG_PM
        .suspend        = sc1200_suspend,
        .resume         = sc1200_resume,
@@ -415,7 +344,13 @@ static int __init sc1200_ide_init(void)
        return ide_pci_register_driver(&driver);
 }
 
+static void __exit sc1200_ide_exit(void)
+{
+       pci_unregister_driver(&driver);
+}
+
 module_init(sc1200_ide_init);
+module_exit(sc1200_ide_exit);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");