/*
- * linux/drivers/ide/pci/hpt366.c Version 1.20 Oct 1, 2007
- *
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
* - rename all the register related variables consistently
* - move all the interrupt twiddling code from the speedproc handlers into
* init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and
+ * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
* separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
* when setting an UltraDMA mode
* - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/io.h>
-#include <asm/irq.h>
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
/* XFER_PIO_0 */ 0xc0d08585
};
+#if 0
+/* These are the timing tables from the HighPoint open source drivers... */
static u32 thirty_three_base_hpt37x[] = {
/* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
/* XFER_UDMA_5 */ 0x12446231,
/* XFER_PIO_1 */ 0x0d029d26,
/* XFER_PIO_0 */ 0x0d029d5e
};
+#else
+/*
+ * The following are the new timing tables with PIO mode data/taskfile transfer
+ * overclocking fixed...
+ */
+
+/* This table is taken from the HPT370 data manual rev. 1.02 */
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
+ /* XFER_UDMA_5 */ 0x16455031,
+ /* XFER_UDMA_4 */ 0x16455031,
+ /* XFER_UDMA_3 */ 0x166d5031,
+ /* XFER_UDMA_2 */ 0x16495031,
+ /* XFER_UDMA_1 */ 0x164d5033,
+ /* XFER_UDMA_0 */ 0x16515097,
+
+ /* XFER_MW_DMA_2 */ 0x26515031,
+ /* XFER_MW_DMA_1 */ 0x26515033,
+ /* XFER_MW_DMA_0 */ 0x26515097,
+
+ /* XFER_PIO_4 */ 0x06515021,
+ /* XFER_PIO_3 */ 0x06515022,
+ /* XFER_PIO_2 */ 0x06515033,
+ /* XFER_PIO_1 */ 0x06915065,
+ /* XFER_PIO_0 */ 0x06d1508a
+};
+
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1a861842,
+ /* XFER_UDMA_5 */ 0x1a861842,
+ /* XFER_UDMA_4 */ 0x1aae1842,
+ /* XFER_UDMA_3 */ 0x1a8e1842,
+ /* XFER_UDMA_2 */ 0x1a0e1842,
+ /* XFER_UDMA_1 */ 0x1a161854,
+ /* XFER_UDMA_0 */ 0x1a1a18ea,
+
+ /* XFER_MW_DMA_2 */ 0x2a821842,
+ /* XFER_MW_DMA_1 */ 0x2a821854,
+ /* XFER_MW_DMA_0 */ 0x2a8218ea,
+
+ /* XFER_PIO_4 */ 0x0a821842,
+ /* XFER_PIO_3 */ 0x0a821843,
+ /* XFER_PIO_2 */ 0x0a821855,
+ /* XFER_PIO_1 */ 0x0ac218a8,
+ /* XFER_PIO_0 */ 0x0b02190c
+};
+
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c86fe62,
+ /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
+ /* XFER_UDMA_4 */ 0x1c8afe62,
+ /* XFER_UDMA_3 */ 0x1c8efe62,
+ /* XFER_UDMA_2 */ 0x1c92fe62,
+ /* XFER_UDMA_1 */ 0x1c9afe62,
+ /* XFER_UDMA_0 */ 0x1c82fe62,
+
+ /* XFER_MW_DMA_2 */ 0x2c82fe62,
+ /* XFER_MW_DMA_1 */ 0x2c82fe66,
+ /* XFER_MW_DMA_0 */ 0x2c82ff2e,
+
+ /* XFER_PIO_4 */ 0x0c82fe62,
+ /* XFER_PIO_3 */ 0x0c82fe84,
+ /* XFER_PIO_2 */ 0x0c82fea6,
+ /* XFER_PIO_1 */ 0x0d02ff26,
+ /* XFER_PIO_0 */ 0x0d42ff7f
+};
+#endif
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
NUM_ATA_CLOCKS
};
+struct hpt_timings {
+ u32 pio_mask;
+ u32 dma_mask;
+ u32 ultra_mask;
+ u32 *clock_table[NUM_ATA_CLOCKS];
+};
+
/*
* Hold all the HighPoint chip information in one place.
*/
u8 udma_mask; /* Allowed UltraDMA modes mask. */
u8 dpll_clk; /* DPLL clock in MHz */
u8 pci_clk; /* PCI clock in MHz */
- u32 **settings; /* Chipset settings table */
+ struct hpt_timings *timings; /* Chipset timing data */
+ u8 clock; /* ATA clock selected */
};
/* Supported HighPoint chips */
HPT371N
};
-static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = {
- twenty_five_base_hpt36x,
- thirty_three_base_hpt36x,
- forty_base_hpt36x,
- NULL,
- NULL
+static struct hpt_timings hpt36x_timings = {
+ .pio_mask = 0xc1f8ffff,
+ .dma_mask = 0x303800ff,
+ .ultra_mask = 0x30070000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
+ [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
+ [ATA_CLOCK_50MHZ] = NULL,
+ [ATA_CLOCK_66MHZ] = NULL
+ }
};
-static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
- NULL,
- thirty_three_base_hpt37x,
- NULL,
- fifty_base_hpt37x,
- sixty_six_base_hpt37x
+static struct hpt_timings hpt37x_timings = {
+ .pio_mask = 0xcfc3ffff,
+ .dma_mask = 0x31c001ff,
+ .ultra_mask = 0x303c0000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = NULL,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
+ [ATA_CLOCK_40MHZ] = NULL,
+ [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
+ [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
+ }
};
-static struct hpt_info hpt36x __devinitdata = {
+static const struct hpt_info hpt36x __devinitdata = {
.chip_name = "HPT36x",
.chip_type = HPT36x,
.udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
.dpll_clk = 0, /* no DPLL */
- .settings = hpt36x_settings
+ .timings = &hpt36x_timings
};
-static struct hpt_info hpt370 __devinitdata = {
+static const struct hpt_info hpt370 __devinitdata = {
.chip_name = "HPT370",
.chip_type = HPT370,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt370a __devinitdata = {
+static const struct hpt_info hpt370a __devinitdata = {
.chip_name = "HPT370A",
.chip_type = HPT370A,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt374 __devinitdata = {
+static const struct hpt_info hpt374 __devinitdata = {
.chip_name = "HPT374",
.chip_type = HPT374,
.udma_mask = ATA_UDMA5,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt372 __devinitdata = {
+static const struct hpt_info hpt372 __devinitdata = {
.chip_name = "HPT372",
.chip_type = HPT372,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 55,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt372a __devinitdata = {
+static const struct hpt_info hpt372a __devinitdata = {
.chip_name = "HPT372A",
.chip_type = HPT372A,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt302 __devinitdata = {
+static const struct hpt_info hpt302 __devinitdata = {
.chip_name = "HPT302",
.chip_type = HPT302,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt371 __devinitdata = {
+static const struct hpt_info hpt371 __devinitdata = {
.chip_name = "HPT371",
.chip_type = HPT371,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt372n __devinitdata = {
+static const struct hpt_info hpt372n __devinitdata = {
.chip_name = "HPT372N",
.chip_type = HPT372N,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt302n __devinitdata = {
+static const struct hpt_info hpt302n __devinitdata = {
.chip_name = "HPT302N",
.chip_type = HPT302N,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
-static struct hpt_info hpt371n __devinitdata = {
+static const struct hpt_info hpt371n __devinitdata = {
.chip_name = "HPT371N",
.chip_type = HPT371N,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
switch (info->chip_type) {
case HPT372 :
for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
if (xfer_speeds[i] == speed)
break;
- /*
- * NOTE: info->settings only points to the pointer
- * to the list of the actual register values
- */
- return (*info->settings)[i];
+
+ return info->timings->clock_table[info->clock][i];
}
-static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = drive->dn ? 0x44 : 0x40;
+ struct hpt_timings *t = info->timings;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
- u32 itr_mask, new_itr;
-
- itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
- (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
-
- new_itr = get_speed_setting(speed, info);
+ u32 new_itr = get_speed_setting(speed, info);
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
+ (speed < XFER_UDMA_0 ? t->dma_mask :
+ t->ultra_mask);
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
/*
* Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
* to avoid problems handling I/O errors later
*/
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
new_itr &= ~0xc0000000;
pci_write_config_dword(dev, itr_addr, new_itr);
}
-static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = 0x40 + (drive->dn * 4);
- u32 old_itr = 0;
- u32 itr_mask, new_itr;
-
- itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
- (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
-
- new_itr = get_speed_setting(speed, info);
-
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
-
- if (speed < XFER_MW_DMA_0)
- new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
-
- if (info->chip_type >= HPT370)
- hpt37x_set_mode(drive, speed);
- else /* hpt368: hpt_minimum_revision(dev, 2) */
- hpt36x_set_mode(drive, speed);
-}
-
static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
}
-static int hpt3xx_quirkproc(ide_drive_t *drive)
+static void hpt3xx_quirkproc(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
const char **list = quirk_drives;
while (*list)
- if (strstr(id->model, *list++))
- return 1;
- return 0;
-}
-
-static void hpt3xx_intrproc(ide_drive_t *drive)
-{
- if (drive->quirk_list)
- return;
+ if (strstr(id->model, *list++)) {
+ drive->quirk_list = 1;
+ return;
+ }
- /* drives in the quirk_list may not like intr setups/cleanups */
- outb(drive->ctl | 2, IDE_CONTROL_REG);
+ drive->quirk_list = 0;
}
static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
if (drive->quirk_list) {
}
} else
outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
- IDE_CONTROL_REG);
+ hwif->io_ports[IDE_CONTROL_OFFSET]);
}
/*
*/
static void hpt366_dma_lost_irq(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
pci_read_config_byte(dev, 0x50, &mcr1);
pci_read_config_byte(dev, 0x52, &mcr3);
pci_read_config_byte(dev, 0x5a, &scr1);
printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
- drive->name, __FUNCTION__, mcr1, mcr3, scr1);
+ drive->name, __func__, mcr1, mcr3, scr1);
if (scr1 & 0x10)
pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
ide_dma_lost_irq(drive);
static void hpt370_clear_engine(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
- pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
+ pci_write_config_byte(dev, hwif->select_data, 0x37);
udelay(10);
}
static void hpt370_irq_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_cmd;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
/* get DMA command mode */
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_stat;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
if (!drive->waiting_for_dma)
printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __FUNCTION__);
+ drive->name, __func__);
return 0;
}
static int hpt374_ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr = 0, mcr_addr = hwif->select_data;
u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
{
- u8 scr2 = inb(hwif->dma_master + 0x7b);
+ unsigned long base = hwif->extra_base;
+ u8 scr2 = inb(base + 0x6b);
if ((scr2 & 0x7f) == mode)
return;
/* Tristate the bus */
- outb(0x80, hwif->dma_master + 0x73);
- outb(0x80, hwif->dma_master + 0x77);
+ outb(0x80, base + 0x63);
+ outb(0x80, base + 0x67);
/* Switch clock and reset channels */
- outb(mode, hwif->dma_master + 0x7b);
- outb(0xc0, hwif->dma_master + 0x79);
+ outb(mode, base + 0x6b);
+ outb(0xc0, base + 0x69);
/*
* Reset the state machines.
* NOTE: avoid accidentally enabling the disabled channels.
*/
- outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
- outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
+ outb(inb(base + 0x60) | 0x32, base + 0x60);
+ outb(inb(base + 0x64) | 0x32, base + 0x64);
/* Complete reset */
- outb(0x00, hwif->dma_master + 0x79);
+ outb(0x00, base + 0x69);
/* Reconnect channels to bus */
- outb(0x00, hwif->dma_master + 0x73);
- outb(0x00, hwif->dma_master + 0x77);
+ outb(0x00, base + 0x63);
+ outb(0x00, base + 0x67);
}
/**
hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21);
}
-/*
- * Set/get power state for a drive.
- * NOTE: affects both drives on each channel.
- *
- * When we turn the power back on, we need to re-initialize things.
- */
-#define TRISTATE_BIT 0x8000
-
-static int hpt3xx_busproc(ide_drive_t *drive, int state)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u8 mcr_addr = hwif->select_data + 2;
- u8 resetmask = hwif->channel ? 0x80 : 0x40;
- u8 bsr2 = 0;
- u16 mcr = 0;
-
- hwif->bus_state = state;
-
- /* Grab the status. */
- pci_read_config_word(dev, mcr_addr, &mcr);
- pci_read_config_byte(dev, 0x59, &bsr2);
-
- /*
- * Set the state. We don't set it if we don't need to do so.
- * Make sure that the drive knows that it has failed if it's off.
- */
- switch (state) {
- case BUSSTATE_ON:
- if (!(bsr2 & resetmask))
- return 0;
- hwif->drives[0].failures = hwif->drives[1].failures = 0;
-
- pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask);
- pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT);
- return 0;
- case BUSSTATE_OFF:
- if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT))
- return 0;
- mcr &= ~TRISTATE_BIT;
- break;
- case BUSSTATE_TRISTATE:
- if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT))
- return 0;
- mcr |= TRISTATE_BIT;
- break;
- default:
- return -EINVAL;
- }
-
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
-
- pci_write_config_word(dev, mcr_addr, mcr);
- pci_write_config_byte(dev, 0x59, bsr2 | resetmask);
- return 0;
-}
-
/**
* hpt37x_calibrate_dpll - calibrate the DPLL
* @dev: PCI device
* We also don't like using the DPLL because this causes glitches
* on PRST-/SRST- when the state engine gets reset...
*/
- if (chip_type >= HPT374 || info->settings[clock] == NULL) {
+ if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
u16 f_low, delta = pci_clk < 50 ? 2 : 4;
int adjust;
clock = ATA_CLOCK_50MHZ;
}
- if (info->settings[clock] == NULL) {
+ if (info->timings->clock_table[clock] == NULL) {
printk(KERN_ERR "%s: unknown bus timing!\n", name);
kfree(info);
return -EIO;
printk("%s: using %d MHz PCI clock\n", name, pci_clk);
}
- /*
- * Advance the table pointer to a slot which points to the list
- * of the register values settings matching the clock being used.
- */
- info->settings += clock;
-
/* Store the clock frequencies. */
info->dpll_clk = dpll_clk;
info->pci_clk = pci_clk;
+ info->clock = clock;
/* Point to this chip's own instance of the hpt_info structure. */
pci_set_drvdata(dev, info);
return dev->irq;
}
+static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
+ u8 chip_type = info->chip_type;
+ u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
+
+ /*
+ * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+ * address lines to access an external EEPROM. To read valid
+ * cable detect state the pins must be enabled as inputs.
+ */
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+ /*
+ * HPT374 PCI function 1
+ * - set bit 15 of reg 0x52 to enable TCBLID as input
+ * - set bit 15 of reg 0x56 to enable FCBLID as input
+ */
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ } else if (chip_type >= HPT370) {
+ /*
+ * HPT370/372 and 374 pcifn 0
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
+ */
+ u8 scr2 = 0;
+
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte(dev, 0x5a, &scr1);
+
+ return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
- u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
- hwif->set_pio_mode = &hpt3xx_set_pio_mode;
- hwif->set_dma_mode = &hpt3xx_set_mode;
- hwif->quirkproc = &hpt3xx_quirkproc;
- hwif->intrproc = &hpt3xx_intrproc;
- hwif->maskproc = &hpt3xx_maskproc;
- hwif->busproc = &hpt3xx_busproc;
-
- hwif->udma_filter = &hpt3xx_udma_filter;
- hwif->mdma_filter = &hpt3xx_mdma_filter;
-
/*
* HPT3xxN chips have some complications:
*
if (hwif->dma_base == 0)
return;
- /*
- * The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external EEPROM. To read valid
- * cable detect state the pins must be enabled as inputs.
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- /*
- * HPT374 PCI function 1
- * - set bit 15 of reg 0x52 to enable TCBLID as input
- * - set bit 15 of reg 0x56 to enable FCBLID as input
- */
- u8 mcr_addr = hwif->select_data + 2;
- u16 mcr;
-
- pci_read_config_word (dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_word(dev, mcr_addr, mcr);
- } else if (chip_type >= HPT370) {
- /*
- * HPT370/372 and 374 pcifn 0
- * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
- */
- u8 scr2 = 0;
-
- pci_read_config_byte (dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else
- pci_read_config_byte (dev, 0x5a, &scr1);
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
if (chip_type >= HPT374) {
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
hwif->dma_lost_irq = &hpt366_dma_lost_irq;
}
-static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
+static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
{
- struct pci_dev *dev = hwif->pci_dev;
- u8 masterdma = 0, slavedma = 0;
- u8 dma_new = 0, dma_old = 0;
- unsigned long flags;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long flags, base = ide_pci_dma_base(hwif, d);
+ u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
+
+ if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+ return -1;
- dma_old = inb(dmabase + 2);
+ dma_old = inb(base + 2);
local_irq_save(flags);
if (masterdma & 0x30) dma_new |= 0x20;
if ( slavedma & 0x30) dma_new |= 0x40;
if (dma_new != dma_old)
- outb(dma_new, dmabase + 2);
+ outb(dma_new, base + 2);
local_irq_restore(flags);
- ide_setup_dma(hwif, dmabase, 8);
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
+ hwif->name, base, base + 7);
+
+ hwif->extra_base = base + (hwif->channel ? 8 : 16);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+
+ ide_setup_dma(hwif, base);
+
+ return 0;
}
static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
return 0;
}
-static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
+#define IDE_HFLAGS_HPT3XX \
+ (IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+ IDE_HFLAG_OFF_BOARD)
+
+static const struct ide_port_ops hpt3xx_port_ops = {
+ .set_pio_mode = hpt3xx_set_pio_mode,
+ .set_dma_mode = hpt3xx_set_mode,
+ .quirkproc = hpt3xx_quirkproc,
+ .maskproc = hpt3xx_maskproc,
+ .mdma_filter = hpt3xx_mdma_filter,
+ .udma_filter = hpt3xx_udma_filter,
+ .cable_detect = hpt3xx_cable_detect,
+};
+
+static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT36x",
.init_chipset = init_chipset_hpt366,
* Bit 4 is for the primary channel, bit 5 for the secondary.
*/
.enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
- .extra = 240,
- .host_flags = IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 1 */
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 2 */
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 3 */
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 4 */
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = ATA_UDMA5,
- .extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 5 */
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .port_ops = &hpt3xx_port_ops,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
}
*/
static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- struct hpt_info *info = NULL;
+ const struct hpt_info *info = NULL;
struct pci_dev *dev2 = NULL;
- ide_pci_device_t d;
+ struct ide_port_info d;
u8 idx = id->driver_data;
u8 rev = dev->revision;
if (rev < 3)
info = &hpt36x;
else {
- static struct hpt_info *hpt37x_info[] =
- { &hpt370, &hpt370a, &hpt372, &hpt372n };
-
- info = hpt37x_info[min_t(u8, rev, 6) - 3];
+ switch (min_t(u8, rev, 6)) {
+ case 3: info = &hpt370; break;
+ case 4: info = &hpt370a; break;
+ case 5: info = &hpt372; break;
+ case 6: info = &hpt372n; break;
+ }
idx++;
}
break;
d.name = info->chip_name;
d.udma_mask = info->udma_mask;
- pci_set_drvdata(dev, info);
+ pci_set_drvdata(dev, (void *)info);
if (info == &hpt36x || info == &hpt374)
dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
if (dev2) {
int ret;
- pci_set_drvdata(dev2, info);
+ pci_set_drvdata(dev2, (void *)info);
if (info == &hpt374)
hpt374_init(dev, dev2);
else {
if (hpt36x_init(dev, dev2))
- d.host_flags |= IDE_HFLAG_BOOTABLE;
+ d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
}
ret = ide_setup_pci_devices(dev, dev2, &d);
return ide_setup_pci_device(dev, &d);
}
-static const struct pci_device_id hpt366_pci_tbl[] = {
+static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff