/*
- * linux/drivers/ide/pci/alim15x3.c Version 0.29 Sep 16 2007
- *
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
* Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
}
/**
- * ata66_ali15x3 - check for UDMA 66 support
+ * ali_cable_detect - cable detection
* @hwif: IDE interface
*
* This checks if the controller and the cable are capable
* FIXME: frobs bits that are not defined on newer ALi devicea
*/
-static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
+static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
u8 cbl = ATA_CBL_PATA40, tmpbyte;
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
- hwif->set_pio_mode = &ali_set_pio_mode;
- hwif->set_dma_mode = &ali_set_dma_mode;
- hwif->udma_filter = &ali_udma_filter;
-
if (hwif->dma_base == 0)
return;
hwif->dma_setup = &ali15x3_dma_setup;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_ali15x3(hwif);
}
/**
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ideic, inmir;
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
1, 11, 0, 12, 0, 14, 0, 15 };
int irq = -1;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229)
+ if (dev->device == PCI_DEVICE_ID_AL_M5229)
hwif->irq = hwif->channel ? 15 : 14;
if (isa_dev) {
/**
* init_dma_ali15x3 - set up DMA on ALi15x3
* @hwif: IDE interface
- * @dmabase: DMA interface base PCI address
+ * @d: IDE port info
*
- * Set up the DMA functionality on the ALi 15x3. For the ALi
- * controllers this is generic so we can let the generic code do
- * the actual work.
+ * Set up the DMA functionality on the ALi 15x3.
*/
-static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
+static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
{
- if (m5229_revision < 0x20)
- return;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long base = ide_pci_dma_base(hwif, d);
+
+ if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+ return -1;
+
if (!hwif->channel)
- outb(inb(dmabase + 2) & 0x60, dmabase + 2);
- ide_setup_dma(hwif, dmabase);
+ outb(inb(base + 2) & 0x60, base + 2);
+
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
+ hwif->name, base, base + 7);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+
+ ide_setup_dma(hwif, base);
+
+ return 0;
}
+static const struct ide_port_ops ali_port_ops = {
+ .set_pio_mode = ali_set_pio_mode,
+ .set_dma_mode = ali_set_dma_mode,
+ .udma_filter = ali_udma_filter,
+ .cable_detect = ali_cable_detect,
+};
+
static const struct ide_port_info ali15x3_chipset __devinitdata = {
.name = "ALI15X3",
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
.init_dma = init_dma_ali15x3,
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .port_ops = &ali_port_ops,
.pio_mask = ATA_PIO5,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
d.udma_mask = ATA_UDMA5;
else
d.udma_mask = ATA_UDMA6;
+ } else {
+ d.host_flags |= IDE_HFLAG_NO_DMA;
+
+ d.mwdma_mask = d.swdma_mask = 0;
}
if (idx == 0)