/*
- * linux/drivers/ide/ide.c Version 7.00beta2 Mar 05 2003
- *
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyrifht (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
* (usually 14 & 15).
* There can be up to two drives per interface, as per the ATA-2 spec.
*
- * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
- * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
- * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
* ...
*
* From hd.c:
* This was a rewrite of just about everything from hd.c, though some original
* code is still sprinkled about. Think of it as a major evolution, with
* inspiration from lots of linux users, esp. hamish@zot.apana.org.au
- *
- * Version 1.0 ALPHA initial code, primary i/f working okay
- * Version 1.3 BETA dual i/f on shared irq tested & working!
- * Version 1.4 BETA added auto probing for irq(s)
- * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms,
- * ...
- * Version 5.50 allow values as small as 20 for idebus=
- * Version 5.51 force non io_32bit in drive_cmd_intr()
- * change delay_10ms() to delay_50ms() to fix problems
- * Version 5.52 fix incorrect invalidation of removable devices
- * add "hdx=slow" command line option
- * Version 5.60 start to modularize the driver; the disk and ATAPI
- * drivers can be compiled as loadable modules.
- * move IDE probe code to ide-probe.c
- * move IDE disk code to ide-disk.c
- * add support for generic IDE device subdrivers
- * add m68k code from Geert Uytterhoeven
- * probe all interfaces by default
- * add ioctl to (re)probe an interface
- * Version 6.00 use per device request queues
- * attempt to optimize shared hwgroup performance
- * add ioctl to manually adjust bandwidth algorithms
- * add kerneld support for the probe module
- * fix bug in ide_error()
- * fix bug in the first ide_get_lock() call for Atari
- * don't flush leftover data for ATAPI devices
- * Version 6.01 clear hwgroup->active while the hwgroup sleeps
- * support HDIO_GETGEO for floppies
- * Version 6.02 fix ide_ack_intr() call
- * check partition table on floppies
- * Version 6.03 handle bad status bit sequencing in ide_wait_stat()
- * Version 6.10 deleted old entries from this list of updates
- * replaced triton.c with ide-dma.c generic PCI DMA
- * added support for BIOS-enabled UltraDMA
- * rename all "promise" things to "pdc4030"
- * fix EZ-DRIVE handling on small disks
- * Version 6.11 fix probe error in ide_scan_devices()
- * fix ancient "jiffies" polling bugs
- * mask all hwgroup interrupts on each irq entry
- * Version 6.12 integrate ioctl and proc interfaces
- * fix parsing of "idex=" command line parameter
- * Version 6.13 add support for ide4/ide5 courtesy rjones@orchestream.com
- * Version 6.14 fixed IRQ sharing among PCI devices
- * Version 6.15 added SMP awareness to IDE drivers
- * Version 6.16 fixed various bugs; even more SMP friendly
- * Version 6.17 fix for newest EZ-Drive problem
- * Version 6.18 default unpartitioned-disk translation now "BIOS LBA"
- * Version 6.19 Re-design for a UNIFORM driver for all platforms,
- * model based on suggestions from Russell King and
- * Geert Uytterhoeven
- * Promise DC4030VL now supported.
- * add support for ide6/ide7
- * delay_50ms() changed to ide_delay_50ms() and exported.
- * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection.
- * Added hdx=flash to allow for second flash disk
- * detection w/o the hang loop.
- * Added support for ide8/ide9
- * Added idex=ata66 for the quirky chipsets that are
- * ATA-66 compliant, but have yet to determine a method
- * of verification of the 80c cable presence.
- * Specifically Promise's PDC20262 chipset.
- * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old
- * hat that clarified original low level driver design.
- * Version 6.30 Added SMP support; fixed multmode issues. -ml
- * Version 6.31 Debug Share INTR's and request queue streaming
- * Native ATA-100 support
- * Prep for Cascades Project
- * Version 7.00alpha First named revision of ide rearrange
- *
- * Some additional driver compile-time options are in ./include/linux/ide.h
- *
- * To do, in likely order of completion:
- * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
- *
*/
#define REVISION "Revision: 7.00alpha2"
-#define VERSION "Id: ide.c 7.00a2 20020906"
-
-#undef REALLY_SLOW_IO /* most systems can safely undef this */
#define _IDE_C /* Tell ide.h it's really us */
static int idebus_parameter; /* holds the "idebus=" parameter */
static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
-static int initializing; /* set while initializing built-in drivers */
-DECLARE_MUTEX(ide_cfg_sem);
+DEFINE_MUTEX(ide_cfg_mtx);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-#ifdef CONFIG_BLK_DEV_IDEPCI
-static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
+#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
+int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
#endif
-#ifdef CONFIG_IDEDMA_AUTO
int noautodma = 0;
-#else
-int noautodma = 1;
-#endif
-
-EXPORT_SYMBOL(noautodma);
#ifdef CONFIG_BLK_DEV_IDEACPI
int ide_noacpi = 0;
/*
* Do not even *think* about calling this!
*/
-static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
+void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
{
unsigned int unit;
hwif->bus_state = BUSSTATE_ON;
- hwif->atapi_dma = 0; /* disable all atapi dma */
- hwif->ultra_mask = 0x80; /* disable all ultra */
- hwif->mwdma_mask = 0x80; /* disable all mwdma */
- hwif->swdma_mask = 0x80; /* disable all swdma */
-
init_completion(&hwif->gendev_rel_comp);
default_hwif_iops(hwif);
init_completion(&drive->gendev_rel_comp);
}
}
+EXPORT_SYMBOL_GPL(ide_init_port_data);
static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
{
ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
- memcpy(&hwif->hw, &hw, sizeof(hw));
memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
#endif
}
-extern void ide_arm_init(void);
-
/*
* init_ide_data() sets reasonable default values into all fields
* of all instances of the hwifs and drives, but only on the first call.
/* Initialise all interface structures */
for (index = 0; index < MAX_HWIFS; ++index) {
hwif = &ide_hwifs[index];
- init_hwif_data(hwif, index);
+ ide_init_port_data(hwif, index);
init_hwif_default(hwif, index);
#if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
- hwif->irq = hwif->hw.irq =
+ hwif->irq =
ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
#endif
}
-#ifdef CONFIG_IDE_ARM
- initializing = 1;
- ide_arm_init();
- initializing = 0;
-#endif
}
/**
#define pci_default 0
#endif /* CONFIG_PCI */
- if (!system_bus_speed) {
- if (idebus_parameter) {
- /* user supplied value */
- system_bus_speed = idebus_parameter;
- } else if (pci_dev_present(pci_default)) {
- /* safe default value for PCI */
- system_bus_speed = 33;
- } else {
- /* safe default value for VESA and PCI */
- system_bus_speed = 50;
- }
- printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
- "for PIO modes%s\n", system_bus_speed,
- idebus_parameter ? "" : "; override with idebus=xx");
+ /* user supplied value */
+ if (idebus_parameter)
+ return idebus_parameter;
+
+ /* safe default value for PCI or VESA and PCI*/
+ return pci_dev_present(pci_default) ? 33 : 50;
+}
+
+ide_hwif_t * ide_find_port(unsigned long base)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->io_ports[IDE_DATA_OFFSET] == base)
+ goto found;
}
- return system_bus_speed;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->io_ports[IDE_DATA_OFFSET] == 0)
+ goto found;
+ }
+
+ hwif = NULL;
+found:
+ return hwif;
}
-#ifdef CONFIG_PROC_FS
-struct proc_dir_entry *proc_ide_root;
-#endif
+EXPORT_SYMBOL_GPL(ide_find_port);
static struct resource* hwif_request_region(ide_hwif_t *hwif,
unsigned long addr, int num)
unsigned long addr;
unsigned int i;
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return 0;
- BUG_ON(hwif->mmio == 1);
addr = hwif->io_ports[IDE_CONTROL_OFFSET];
if (addr && !hwif_request_region(hwif, addr, 1))
goto control_region_busy;
{
u32 i = 0;
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return;
if (hwif->io_ports[IDE_CONTROL_OFFSET])
release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
hwif->straight8 = tmp_hwif->straight8;
hwif->bus_state = tmp_hwif->bus_state;
- hwif->atapi_dma = tmp_hwif->atapi_dma;
+ hwif->host_flags = tmp_hwif->host_flags;
+
+ hwif->pio_mask = tmp_hwif->pio_mask;
+
hwif->ultra_mask = tmp_hwif->ultra_mask;
hwif->mwdma_mask = tmp_hwif->mwdma_mask;
hwif->swdma_mask = tmp_hwif->swdma_mask;
+ hwif->cbl = tmp_hwif->cbl;
+
hwif->chipset = tmp_hwif->chipset;
hwif->hold = tmp_hwif->hold;
+ hwif->dev = tmp_hwif->dev;
+
#ifdef CONFIG_BLK_DEV_IDEPCI
- hwif->pci_dev = tmp_hwif->pci_dev;
hwif->cds = tmp_hwif->cds;
#endif
- hwif->tuneproc = tmp_hwif->tuneproc;
- hwif->speedproc = tmp_hwif->speedproc;
+ hwif->set_pio_mode = tmp_hwif->set_pio_mode;
+ hwif->set_dma_mode = tmp_hwif->set_dma_mode;
+ hwif->mdma_filter = tmp_hwif->mdma_filter;
+ hwif->udma_filter = tmp_hwif->udma_filter;
hwif->selectproc = tmp_hwif->selectproc;
hwif->reset_poll = tmp_hwif->reset_poll;
hwif->pre_reset = tmp_hwif->pre_reset;
hwif->resetproc = tmp_hwif->resetproc;
- hwif->intrproc = tmp_hwif->intrproc;
hwif->maskproc = tmp_hwif->maskproc;
hwif->quirkproc = tmp_hwif->quirkproc;
hwif->busproc = tmp_hwif->busproc;
hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes;
hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes;
+ hwif->dma_host_set = tmp_hwif->dma_host_set;
hwif->dma_setup = tmp_hwif->dma_setup;
hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd;
hwif->dma_start = tmp_hwif->dma_start;
hwif->ide_dma_end = tmp_hwif->ide_dma_end;
- hwif->ide_dma_check = tmp_hwif->ide_dma_check;
- hwif->ide_dma_on = tmp_hwif->ide_dma_on;
- hwif->ide_dma_off_quietly = tmp_hwif->ide_dma_off_quietly;
hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq;
- hwif->ide_dma_host_on = tmp_hwif->ide_dma_host_on;
- hwif->ide_dma_host_off = tmp_hwif->ide_dma_host_off;
- hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq;
- hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout;
+ hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq;
+ hwif->dma_lost_irq = tmp_hwif->dma_lost_irq;
+ hwif->dma_timeout = tmp_hwif->dma_timeout;
hwif->OUTB = tmp_hwif->OUTB;
hwif->OUTBSYNC = tmp_hwif->OUTBSYNC;
hwif->OUTW = tmp_hwif->OUTW;
- hwif->OUTL = tmp_hwif->OUTL;
hwif->OUTSW = tmp_hwif->OUTSW;
hwif->OUTSL = tmp_hwif->OUTSL;
hwif->INB = tmp_hwif->INB;
hwif->INW = tmp_hwif->INW;
- hwif->INL = tmp_hwif->INL;
hwif->INSW = tmp_hwif->INSW;
hwif->INSL = tmp_hwif->INSL;
hwif->mmio = tmp_hwif->mmio;
hwif->rqsize = tmp_hwif->rqsize;
- hwif->no_lba48 = tmp_hwif->no_lba48;
#ifndef CONFIG_BLK_DEV_IDECS
hwif->irq = tmp_hwif->irq;
#endif
hwif->dma_base = tmp_hwif->dma_base;
- hwif->dma_master = tmp_hwif->dma_master;
hwif->dma_command = tmp_hwif->dma_command;
hwif->dma_vendor1 = tmp_hwif->dma_vendor1;
hwif->dma_status = tmp_hwif->dma_status;
hwif->select_data = tmp_hwif->select_data;
hwif->extra_base = tmp_hwif->extra_base;
hwif->extra_ports = tmp_hwif->extra_ports;
- hwif->autodma = tmp_hwif->autodma;
- hwif->udma_four = tmp_hwif->udma_four;
- hwif->no_dsc = tmp_hwif->no_dsc;
hwif->hwif_data = tmp_hwif->hwif_data;
}
+void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
+{
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
+
+ spin_lock_irq(&ide_lock);
+ /*
+ * Remove us from the hwgroup, and free
+ * the hwgroup if we were the only member
+ */
+ if (hwif->next == hwif) {
+ BUG_ON(hwgroup->hwif != hwif);
+ kfree(hwgroup);
+ } else {
+ /* There is another interface in hwgroup.
+ * Unlink us, and set hwgroup->drive and ->hwif to
+ * something sane.
+ */
+ ide_hwif_t *g = hwgroup->hwif;
+
+ while (g->next != hwif)
+ g = g->next;
+ g->next = hwif->next;
+ if (hwgroup->hwif == hwif) {
+ /* Chose a random hwif for hwgroup->hwif.
+ * It's guaranteed that there are no drives
+ * left in the hwgroup.
+ */
+ BUG_ON(hwgroup->drive != NULL);
+ hwgroup->hwif = g;
+ }
+ BUG_ON(hwgroup->hwif == hwif);
+ }
+ spin_unlock_irq(&ide_lock);
+}
+
/**
* ide_unregister - free an IDE interface
* @index: index of interface (will change soon to a pointer)
+ * @init_default: init default hwif flag
+ * @restore: restore hwif flag
*
* Perform the final unregister of an IDE interface. At the moment
* we don't refcount interfaces so this will also get split up.
* This is raving bonkers.
*/
-void ide_unregister(unsigned int index)
+void ide_unregister(unsigned int index, int init_default, int restore)
{
ide_drive_t *drive;
ide_hwif_t *hwif, *g;
- static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
+ static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
ide_hwgroup_t *hwgroup;
int irq_count = 0, unit;
BUG_ON(in_interrupt());
BUG_ON(irqs_disabled());
- down(&ide_cfg_sem);
+ mutex_lock(&ide_cfg_mtx);
spin_lock_irq(&ide_lock);
hwif = &ide_hwifs[index];
if (!hwif->present)
spin_unlock_irq(&ide_lock);
- destroy_proc_ide_interface(hwif);
+ ide_proc_unregister_port(hwif);
hwgroup = hwif->hwgroup;
/*
if (irq_count == 1)
free_irq(hwif->irq, hwgroup);
- spin_lock_irq(&ide_lock);
- /*
- * Note that we only release the standard ports,
- * and do not even try to handle any extra ports
- * allocated for weird IDE interface chipsets.
- */
- ide_hwif_release_regions(hwif);
-
- /*
- * Remove us from the hwgroup, and free
- * the hwgroup if we were the only member
- */
- if (hwif->next == hwif) {
- BUG_ON(hwgroup->hwif != hwif);
- kfree(hwgroup);
- } else {
- /* There is another interface in hwgroup.
- * Unlink us, and set hwgroup->drive and ->hwif to
- * something sane.
- */
- g = hwgroup->hwif;
- while (g->next != hwif)
- g = g->next;
- g->next = hwif->next;
- if (hwgroup->hwif == hwif) {
- /* Chose a random hwif for hwgroup->hwif.
- * It's guaranteed that there are no drives
- * left in the hwgroup.
- */
- BUG_ON(hwgroup->drive != NULL);
- hwgroup->hwif = g;
- }
- BUG_ON(hwgroup->hwif == hwif);
- }
+ ide_remove_port_from_hwgroup(hwif);
- /* More messed up locking ... */
- spin_unlock_irq(&ide_lock);
device_unregister(&hwif->gendev);
wait_for_completion(&hwif->gendev_rel_comp);
(void) ide_release_dma(hwif);
hwif->dma_base = 0;
- hwif->dma_master = 0;
hwif->dma_command = 0;
hwif->dma_vendor1 = 0;
hwif->dma_status = 0;
hwif->extra_ports = 0;
}
+ /*
+ * Note that we only release the standard ports,
+ * and do not even try to handle any extra ports
+ * allocated for weird IDE interface chipsets.
+ */
+ ide_hwif_release_regions(hwif);
+
/* copy original settings */
tmp_hwif = *hwif;
/* restore hwif data to pristine status */
- init_hwif_data(hwif, index);
- init_hwif_default(hwif, index);
+ ide_init_port_data(hwif, index);
+
+ if (init_default)
+ init_hwif_default(hwif, index);
- ide_hwif_restore(hwif, &tmp_hwif);
+ if (restore)
+ ide_hwif_restore(hwif, &tmp_hwif);
abort:
spin_unlock_irq(&ide_lock);
- up(&ide_cfg_sem);
+ mutex_unlock(&ide_cfg_mtx);
}
EXPORT_SYMBOL(ide_unregister);
}
}
hw->irq = irq;
- hw->dma = NO_DMA;
hw->ack_intr = ack_intr;
/*
* hw->iops = iops;
*/
}
+void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
+{
+ memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
+ hwif->irq = hw->irq;
+ hwif->noprobe = 0;
+ hwif->chipset = hw->chipset;
+ hwif->gendev.parent = hw->dev;
+ hwif->ack_intr = hw->ack_intr;
+}
+EXPORT_SYMBOL_GPL(ide_init_port_hw);
+
+ide_hwif_t *ide_deprecated_find_port(unsigned long base)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->io_ports[IDE_DATA_OFFSET] == base)
+ goto found;
+ }
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->hold)
+ continue;
+ if (!hwif->present && hwif->mate == NULL)
+ goto found;
+ }
+
+ hwif = NULL;
+found:
+ return hwif;
+}
+EXPORT_SYMBOL_GPL(ide_deprecated_find_port);
+
/**
- * ide_register_hw_with_fixup - register IDE interface
+ * ide_register_hw - register IDE interface
* @hw: hardware registers
+ * @quirkproc: quirkproc function
* @hwifp: pointer to returned hwif
- * @fixup: fixup function
*
* Register an IDE interface, specifying exactly the registers etc.
- * Set init=1 iff calling before probes have taken place.
*
* Returns -1 on error.
*/
-int ide_register_hw_with_fixup(hw_regs_t *hw, ide_hwif_t **hwifp, void(*fixup)(ide_hwif_t *hwif))
+int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *),
+ ide_hwif_t **hwifp)
{
int index, retry = 1;
ide_hwif_t *hwif;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
do {
- for (index = 0; index < MAX_HWIFS; ++index) {
- hwif = &ide_hwifs[index];
- if (hwif->hw.io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
- goto found;
- }
- for (index = 0; index < MAX_HWIFS; ++index) {
- hwif = &ide_hwifs[index];
- if (hwif->hold)
- continue;
- if ((!hwif->present && !hwif->mate && !initializing) ||
- (!hwif->hw.io_ports[IDE_DATA_OFFSET] && initializing))
- goto found;
- }
+ hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]);
+ index = hwif->index;
+ if (hwif)
+ goto found;
for (index = 0; index < MAX_HWIFS; index++)
- ide_unregister(index);
+ ide_unregister(index, 1, 1);
} while (retry--);
return -1;
found:
if (hwif->present)
- ide_unregister(index);
- else if (!hwif->hold) {
- init_hwif_data(hwif, index);
- init_hwif_default(hwif, index);
- }
- if (hwif->present)
- return -1;
- memcpy(&hwif->hw, hw, sizeof(*hw));
- memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
- hwif->irq = hw->irq;
- hwif->noprobe = 0;
- hwif->chipset = hw->chipset;
- hwif->gendev.parent = hw->dev;
+ ide_unregister(index, 0, 1);
+ else if (!hwif->hold)
+ ide_init_port_data(hwif, index);
- if (!initializing) {
- probe_hwif_init_with_fixup(hwif, fixup);
- create_proc_ide_interfaces();
- }
+ ide_init_port_hw(hwif, hw);
+ hwif->quirkproc = quirkproc;
- if (hwifp)
- *hwifp = hwif;
+ idx[0] = index;
- return (initializing || hwif->present) ? index : -1;
-}
+ ide_device_add(idx, NULL);
-EXPORT_SYMBOL(ide_register_hw_with_fixup);
+ if (hwifp)
+ *hwifp = hwif;
-int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp)
-{
- return ide_register_hw_with_fixup(hw, hwifp, NULL);
+ return hwif->present ? index : -1;
}
EXPORT_SYMBOL(ide_register_hw);
* Locks for IDE setting functionality
*/
-DECLARE_MUTEX(ide_setting_sem);
-
-/**
- * __ide_add_setting - add an ide setting option
- * @drive: drive to use
- * @name: setting name
- * @rw: true if the function is read write
- * @read_ioctl: function to call on read
- * @write_ioctl: function to call on write
- * @data_type: type of data
- * @min: range minimum
- * @max: range maximum
- * @mul_factor: multiplication scale
- * @div_factor: divison scale
- * @data: private data field
- * @set: setting
- * @auto_remove: setting auto removal flag
- *
- * Removes the setting named from the device if it is present.
- * The function takes the settings_lock to protect against
- * parallel changes. This function must not be called from IRQ
- * context. Returns 0 on success or -1 on failure.
- *
- * BUGS: This code is seriously over-engineered. There is also
- * magic about how the driver specific features are setup. If
- * a driver is attached we assume the driver settings are auto
- * remove.
- */
-
-static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
-{
- ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
-
- down(&ide_setting_sem);
- while ((*p) && strcmp((*p)->name, name) < 0)
- p = &((*p)->next);
- if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
- goto abort;
- if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
- goto abort;
- strcpy(setting->name, name);
- setting->rw = rw;
- setting->read_ioctl = read_ioctl;
- setting->write_ioctl = write_ioctl;
- setting->data_type = data_type;
- setting->min = min;
- setting->max = max;
- setting->mul_factor = mul_factor;
- setting->div_factor = div_factor;
- setting->data = data;
- setting->set = set;
-
- setting->next = *p;
- if (auto_remove)
- setting->auto_remove = 1;
- *p = setting;
- up(&ide_setting_sem);
- return 0;
-abort:
- up(&ide_setting_sem);
- kfree(setting);
- return -1;
-}
-
-int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
-{
- return __ide_add_setting(drive, name, rw, read_ioctl, write_ioctl, data_type, min, max, mul_factor, div_factor, data, set, 1);
-}
-
-EXPORT_SYMBOL(ide_add_setting);
-
-/**
- * __ide_remove_setting - remove an ide setting option
- * @drive: drive to use
- * @name: setting name
- *
- * Removes the setting named from the device if it is present.
- * The caller must hold the setting semaphore.
- */
-
-static void __ide_remove_setting (ide_drive_t *drive, char *name)
-{
- ide_settings_t **p, *setting;
-
- p = (ide_settings_t **) &drive->settings;
-
- while ((*p) && strcmp((*p)->name, name))
- p = &((*p)->next);
- if ((setting = (*p)) == NULL)
- return;
-
- (*p) = setting->next;
-
- kfree(setting->name);
- kfree(setting);
-}
-
-/**
- * ide_find_setting_by_ioctl - find a drive specific ioctl
- * @drive: drive to scan
- * @cmd: ioctl command to handle
- *
- * Scan's the device setting table for a matching entry and returns
- * this or NULL if no entry is found. The caller must hold the
- * setting semaphore
- */
-
-static ide_settings_t *ide_find_setting_by_ioctl (ide_drive_t *drive, int cmd)
-{
- ide_settings_t *setting = drive->settings;
-
- while (setting) {
- if (setting->read_ioctl == cmd || setting->write_ioctl == cmd)
- break;
- setting = setting->next;
- }
-
- return setting;
-}
-
-/**
- * ide_find_setting_by_name - find a drive specific setting
- * @drive: drive to scan
- * @name: setting name
- *
- * Scan's the device setting table for a matching entry and returns
- * this or NULL if no entry is found. The caller must hold the
- * setting semaphore
- */
-
-ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name)
-{
- ide_settings_t *setting = drive->settings;
-
- while (setting) {
- if (strcmp(setting->name, name) == 0)
- break;
- setting = setting->next;
- }
- return setting;
-}
-
-/**
- * auto_remove_settings - remove driver specific settings
- * @drive: drive
- *
- * Automatically remove all the driver specific settings for this
- * drive. This function may not be called from IRQ context. The
- * caller must hold ide_setting_sem.
- */
-
-static void auto_remove_settings (ide_drive_t *drive)
-{
- ide_settings_t *setting;
-repeat:
- setting = drive->settings;
- while (setting) {
- if (setting->auto_remove) {
- __ide_remove_setting(drive, setting->name);
- goto repeat;
- }
- setting = setting->next;
- }
-}
+DEFINE_MUTEX(ide_setting_mtx);
-/**
- * ide_read_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- *
- * Read a drive setting and return the value. The caller
- * must hold the ide_setting_sem when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- */
-
-int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting)
-{
- int val = -EINVAL;
- unsigned long flags;
-
- if ((setting->rw & SETTING_READ)) {
- spin_lock_irqsave(&ide_lock, flags);
- switch(setting->data_type) {
- case TYPE_BYTE:
- val = *((u8 *) setting->data);
- break;
- case TYPE_SHORT:
- val = *((u16 *) setting->data);
- break;
- case TYPE_INT:
- case TYPE_INTA:
- val = *((u32 *) setting->data);
- break;
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- }
- return val;
-}
+EXPORT_SYMBOL_GPL(ide_setting_mtx);
/**
* ide_spin_wait_hwgroup - wait for group
EXPORT_SYMBOL(ide_spin_wait_hwgroup);
-/**
- * ide_write_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- * @val: value
- *
- * Write a drive setting if it is possible. The caller
- * must hold the ide_setting_sem when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- *
- * FIXME: This should be changed to enqueue a special request
- * to the driver to change settings, and then wait on a sema for completion.
- * The current scheme of polling is kludgy, though safe enough.
- */
-
-int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val)
+int set_io_32bit(ide_drive_t *drive, int arg)
{
- int i;
- u32 *p;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (!(setting->rw & SETTING_WRITE))
+ if (drive->no_io_32bit)
return -EPERM;
- if (val < setting->min || val > setting->max)
+
+ if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
return -EINVAL;
- if (setting->set)
- return setting->set(drive, val);
+
if (ide_spin_wait_hwgroup(drive))
return -EBUSY;
- switch (setting->data_type) {
- case TYPE_BYTE:
- *((u8 *) setting->data) = val;
- break;
- case TYPE_SHORT:
- *((u16 *) setting->data) = val;
- break;
- case TYPE_INT:
- *((u32 *) setting->data) = val;
- break;
- case TYPE_INTA:
- p = (u32 *) setting->data;
- for (i = 0; i < 1 << PARTN_BITS; i++, p++)
- *p = val;
- break;
- }
+
+ drive->io_32bit = arg;
+
spin_unlock_irq(&ide_lock);
+
return 0;
}
-static int set_io_32bit(ide_drive_t *drive, int arg)
+static int set_ksettings(ide_drive_t *drive, int arg)
{
- drive->io_32bit = arg;
-#ifdef CONFIG_BLK_DEV_DTC2278
- if (HWIF(drive)->chipset == ide_dtc2278)
- HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
-#endif /* CONFIG_BLK_DEV_DTC2278 */
+ if (arg < 0 || arg > 1)
+ return -EINVAL;
+
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+ drive->keep_settings = arg;
+ spin_unlock_irq(&ide_lock);
+
return 0;
}
-static int set_using_dma (ide_drive_t *drive, int arg)
+int set_using_dma(ide_drive_t *drive, int arg)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
+ ide_hwif_t *hwif = drive->hwif;
+ int err = -EPERM;
+
+ if (arg < 0 || arg > 1)
+ return -EINVAL;
+
if (!drive->id || !(drive->id->capability & 1))
- return -EPERM;
- if (HWIF(drive)->ide_dma_check == NULL)
- return -EPERM;
+ goto out;
+
+ if (hwif->dma_host_set == NULL)
+ goto out;
+
+ err = -EBUSY;
+ if (ide_spin_wait_hwgroup(drive))
+ goto out;
+ /*
+ * set ->busy flag, unlock and let it ride
+ */
+ hwif->hwgroup->busy = 1;
+ spin_unlock_irq(&ide_lock);
+
+ err = 0;
+
if (arg) {
- if (HWIF(drive)->ide_dma_check(drive)) return -EIO;
- if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
- } else {
- if (__ide_dma_off(drive))
- return -EIO;
- }
- return 0;
+ if (ide_set_dma(drive))
+ err = -EIO;
+ } else
+ ide_dma_off(drive);
+
+ /*
+ * lock, clear ->busy flag and unlock before leaving
+ */
+ spin_lock_irq(&ide_lock);
+ hwif->hwgroup->busy = 0;
+ spin_unlock_irq(&ide_lock);
+out:
+ return err;
#else
+ if (arg < 0 || arg > 1)
+ return -EINVAL;
+
return -EPERM;
#endif
}
-static int set_pio_mode (ide_drive_t *drive, int arg)
+int set_pio_mode(ide_drive_t *drive, int arg)
{
struct request rq;
- if (!HWIF(drive)->tuneproc)
+ if (arg < 0 || arg > 255)
+ return -EINVAL;
+
+ if (drive->hwif->set_pio_mode == NULL)
return -ENOSYS;
+
if (drive->special.b.set_tune)
return -EBUSY;
+
ide_init_drive_cmd(&rq);
+ rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
+
drive->tune_req = (u8) arg;
drive->special.b.set_tune = 1;
(void) ide_do_drive_cmd(drive, &rq, ide_wait);
return 0;
}
-static int set_xfer_rate (ide_drive_t *drive, int arg)
+static int set_unmaskirq(ide_drive_t *drive, int arg)
{
- int err = ide_wait_cmd(drive,
- WIN_SETFEATURES, (u8) arg,
- SETFEATURES_XFER, 0, NULL);
+ if (drive->no_unmask)
+ return -EPERM;
- if (!err && arg) {
- ide_set_xfer_rate(drive, (u8) arg);
- ide_driveid_update(drive);
- }
- return err;
-}
+ if (arg < 0 || arg > 1)
+ return -EINVAL;
-/**
- * ide_add_generic_settings - generic ide settings
- * @drive: drive being configured
- *
- * Add the generic parts of the system settings to the /proc files and
- * ioctls for this IDE device. The caller must not be holding the
- * ide_setting_sem.
- */
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+ drive->unmask = arg;
+ spin_unlock_irq(&ide_lock);
-void ide_add_generic_settings (ide_drive_t *drive)
-{
-/*
- * drive setting name read/write access read ioctl write ioctl data type min max mul_factor div_factor data pointer set function
- */
- __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, HDIO_GET_32BIT, HDIO_SET_32BIT, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
- __ide_add_setting(drive, "keepsettings", SETTING_RW, HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
- __ide_add_setting(drive, "nice1", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
- __ide_add_setting(drive, "pio_mode", SETTING_WRITE, -1, HDIO_SET_PIO_MODE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
- __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
- __ide_add_setting(drive, "using_dma", SETTING_RW, HDIO_GET_DMA, HDIO_SET_DMA, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
- __ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
- __ide_add_setting(drive, "current_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
- __ide_add_setting(drive, "number", SETTING_RW, -1, -1, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
+ return 0;
}
/**
int system_bus_clock (void)
{
- return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
+ return system_bus_speed;
}
EXPORT_SYMBOL(system_bus_clock);
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ int ret;
/* Call ACPI _GTM only once */
if (!(drive->dn % 2))
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ ret = ide_do_drive_cmd(drive, &rq, ide_wait);
+ /* only call ACPI _PS3 after both drivers are suspended */
+ if (!ret && (((drive->dn % 2) && hwif->drives[0].present
+ && hwif->drives[1].present)
+ || !hwif->drives[0].present
+ || !hwif->drives[1].present))
+ ide_acpi_set_state(hwif, 0);
+ return ret;
}
static int generic_ide_resume(struct device *dev)
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ int err;
/* Call ACPI _STM only once */
- if (!(drive->dn % 2))
+ if (!(drive->dn % 2)) {
+ ide_acpi_set_state(hwif, 1);
ide_acpi_push_timing(hwif);
+ }
ide_acpi_exec_tfs(drive);
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
- return ide_do_drive_cmd(drive, &rq, ide_head_wait);
+ err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
+
+ if (err == 0 && dev->driver) {
+ ide_driver_t *drv = to_ide_driver(dev->driver);
+
+ if (drv->resume)
+ drv->resume(drive);
+ }
+
+ return err;
}
int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
unsigned int cmd, unsigned long arg)
{
- ide_settings_t *setting;
+ unsigned long flags;
ide_driver_t *drv;
- int err = 0;
void __user *p = (void __user *)arg;
+ int err = 0, (*setfunc)(ide_drive_t *, int);
+ u8 *val;
- down(&ide_setting_sem);
- if ((setting = ide_find_setting_by_ioctl(drive, cmd)) != NULL) {
- if (cmd == setting->read_ioctl) {
- err = ide_read_setting(drive, setting);
- up(&ide_setting_sem);
- return err >= 0 ? put_user(err, (long __user *)arg) : err;
- } else {
- if (bdev != bdev->bd_contains)
- err = -EINVAL;
- else
- err = ide_write_setting(drive, setting, arg);
- up(&ide_setting_sem);
- return err;
- }
+ switch (cmd) {
+ case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val;
+ case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
+ case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val;
+ case HDIO_GET_DMA: val = &drive->using_dma; goto read_val;
+ case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val;
+ case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val;
+ case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val;
+ case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val;
+ case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val;
}
- up(&ide_setting_sem);
switch (cmd) {
case HDIO_OBSOLETE_IDENTITY:
ide_init_hwif_ports(&hw, (unsigned long) args[0],
(unsigned long) args[1], NULL);
hw.irq = args[2];
- if (ide_register_hw(&hw, NULL) == -1)
+ if (ide_register_hw(&hw, NULL, NULL) == -1)
return -EIO;
return 0;
}
case HDIO_UNREGISTER_HWIF:
if (!capable(CAP_SYS_RAWIO)) return -EACCES;
/* (arg > MAX_HWIFS) checked in function */
- ide_unregister(arg);
+ ide_unregister(arg, 1, 1);
return 0;
case HDIO_SET_NICE:
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
return 0;
}
- case CDROMEJECT:
- case CDROMCLOSETRAY:
- return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
-
case HDIO_GET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
default:
return -EINVAL;
}
+
+read_val:
+ mutex_lock(&ide_setting_mtx);
+ spin_lock_irqsave(&ide_lock, flags);
+ err = *val;
+ spin_unlock_irqrestore(&ide_lock, flags);
+ mutex_unlock(&ide_setting_mtx);
+ return err >= 0 ? put_user(err, (long __user *)arg) : err;
+
+set_val:
+ if (bdev != bdev->bd_contains)
+ err = -EINVAL;
+ else {
+ if (!capable(CAP_SYS_ADMIN))
+ err = -EACCES;
+ else {
+ mutex_lock(&ide_setting_mtx);
+ err = setfunc(drive, arg);
+ mutex_unlock(&ide_setting_mtx);
+ }
+ }
+ return err;
}
EXPORT_SYMBOL(generic_ide_ioctl);
return 0; /* zero = nothing matched */
}
-#ifdef CONFIG_BLK_DEV_ALI14XX
-static int __initdata probe_ali14xx;
-extern int ali14xx_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_UMC8672
-static int __initdata probe_umc8672;
-extern int umc8672_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_DTC2278
-static int __initdata probe_dtc2278;
-extern int dtc2278_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_HT6560B
-static int __initdata probe_ht6560b;
-extern int ht6560b_init(void);
-#endif
-#ifdef CONFIG_BLK_DEV_QD65XX
-static int __initdata probe_qd65xx;
-extern int qd65xx_init(void);
-#endif
+extern int probe_ali14xx;
+extern int probe_umc8672;
+extern int probe_dtc2278;
+extern int probe_ht6560b;
+extern int probe_qd65xx;
+extern int cmd640_vlb;
static int __initdata is_chipset_set[MAX_HWIFS];
if (!strcmp(s, "ide=nodma")) {
printk(" : Prevented DMA\n");
noautodma = 1;
- return 1;
+ goto obsolete_option;
}
-#ifdef CONFIG_BLK_DEV_IDEPCI
+#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
if (!strcmp(s, "ide=reverse")) {
ide_scan_direction = 1;
printk(" : Enabled support for IDE inverse scan order.\n");
return 1;
}
-#endif /* CONFIG_BLK_DEV_IDEPCI */
+#endif
#ifdef CONFIG_BLK_DEV_IDEACPI
if (!strcmp(s, "ide=noacpi")) {
*/
if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
const char *hd_words[] = {
- "none", "noprobe", "nowerr", "cdrom", "serialize",
- "autotune", "noautotune", "minus8", "swapdata", "bswap",
+ "none", "noprobe", "nowerr", "cdrom", "nodma",
+ "autotune", "noautotune", "-8", "-9", "-10",
"noflush", "remap", "remap63", "scsi", NULL };
unit = s[2] - 'a';
hw = unit / MAX_DRIVES;
drive->ready_stat = 0;
hwif->noprobe = 0;
goto done;
- case -5: /* "serialize" */
- printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
- goto do_serialize;
+ case -5: /* nodma */
+ drive->nodma = 1;
+ goto done;
case -6: /* "autotune" */
drive->autotune = IDE_TUNE_AUTO;
goto obsolete_option;
case -7: /* "noautotune" */
drive->autotune = IDE_TUNE_NOAUTO;
goto obsolete_option;
- case -9: /* "swapdata" */
- case -10: /* "bswap" */
- drive->bswap = 1;
- goto done;
case -11: /* noflush */
drive->noflush = 1;
goto done;
* (-8, -9, -10) are reserved to ease the hardcoding.
*/
static const char *ide_words[] = {
- "noprobe", "serialize", "autotune", "noautotune",
- "reset", "dma", "ata66", "minus8", "minus9",
+ "noprobe", "serialize", "minus3", "minus4",
+ "reset", "minus6", "ata66", "minus8", "minus9",
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
+
+ hw_regs_t hwregs;
+
hw = s[3] - '0';
hwif = &ide_hwifs[hw];
i = match_parm(&s[4], ide_words, vals, 3);
#endif
#ifdef CONFIG_BLK_DEV_CMD640
case -14: /* "cmd640_vlb" */
- {
- extern int cmd640_vlb; /* flag for cmd640.c */
cmd640_vlb = 1;
goto done;
- }
#endif
#ifdef CONFIG_BLK_DEV_HT6560B
case -13: /* "ht6560b" */
hwif->chipset = mate->chipset = ide_4drives;
mate->irq = hwif->irq;
memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
- goto do_serialize;
+ hwif->mate = mate;
+ mate->mate = hwif;
+ hwif->serialized = mate->serialized = 1;
+ goto obsolete_option;
}
#endif /* CONFIG_BLK_DEV_4DRIVES */
case -10: /* minus10 */
case -9: /* minus9 */
case -8: /* minus8 */
+ case -6:
+ case -4:
+ case -3:
goto bad_option;
case -7: /* ata66 */
#ifdef CONFIG_BLK_DEV_IDEPCI
- hwif->udma_four = 1;
+ /*
+ * Use ATA_CBL_PATA40_SHORT so drive side
+ * cable detection is also overriden.
+ */
+ hwif->cbl = ATA_CBL_PATA40_SHORT;
goto obsolete_option;
#else
goto bad_hwif;
#endif
- case -6: /* dma */
- hwif->autodma = 1;
- goto obsolete_option;
case -5: /* "reset" */
hwif->reset = 1;
goto obsolete_option;
- case -4: /* "noautotune" */
- hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
- hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
- goto obsolete_option;
- case -3: /* "autotune" */
- hwif->drives[0].autotune = IDE_TUNE_AUTO;
- hwif->drives[1].autotune = IDE_TUNE_AUTO;
- goto obsolete_option;
case -2: /* "serialize" */
- do_serialize:
hwif->mate = &ide_hwifs[hw^1];
hwif->mate->mate = hwif;
hwif->serialized = hwif->mate->serialized = 1;
case 2: /* base,ctl */
vals[2] = 0; /* default irq = probe for it */
case 3: /* base,ctl,irq */
- hwif->hw.irq = vals[2];
- ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
- memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+ memset(&hwregs, 0, sizeof(hwregs));
+ ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq);
+ memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports));
hwif->irq = vals[2];
hwif->noprobe = 0;
hwif->chipset = ide_forced;
return 1;
}
-extern void __init pnpide_init(void);
-extern void __exit pnpide_exit(void);
-extern void __init h8300_ide_init(void);
-
-/*
- * probe_for_hwifs() finds/initializes "known" IDE interfaces
- */
-static void __init probe_for_hwifs (void)
-{
-#ifdef CONFIG_BLK_DEV_IDEPCI
- ide_scan_pcibus(ide_scan_direction);
-#endif /* CONFIG_BLK_DEV_IDEPCI */
-
-#ifdef CONFIG_ETRAX_IDE
- {
- extern void init_e100_ide(void);
- init_e100_ide();
- }
-#endif /* CONFIG_ETRAX_IDE */
-#ifdef CONFIG_BLK_DEV_CMD640
- {
- extern void ide_probe_for_cmd640x(void);
- ide_probe_for_cmd640x();
- }
-#endif /* CONFIG_BLK_DEV_CMD640 */
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- {
- extern void pmac_ide_probe(void);
- pmac_ide_probe();
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#ifdef CONFIG_BLK_DEV_GAYLE
- {
- extern void gayle_init(void);
- gayle_init();
- }
-#endif /* CONFIG_BLK_DEV_GAYLE */
-#ifdef CONFIG_BLK_DEV_FALCON_IDE
- {
- extern void falconide_init(void);
- falconide_init();
- }
-#endif /* CONFIG_BLK_DEV_FALCON_IDE */
-#ifdef CONFIG_BLK_DEV_MAC_IDE
- {
- extern void macide_init(void);
- macide_init();
- }
-#endif /* CONFIG_BLK_DEV_MAC_IDE */
-#ifdef CONFIG_BLK_DEV_Q40IDE
- {
- extern void q40ide_init(void);
- q40ide_init();
- }
-#endif /* CONFIG_BLK_DEV_Q40IDE */
-#ifdef CONFIG_BLK_DEV_BUDDHA
- {
- extern void buddha_init(void);
- buddha_init();
- }
-#endif /* CONFIG_BLK_DEV_BUDDHA */
-#ifdef CONFIG_BLK_DEV_IDEPNP
- pnpide_init();
-#endif
-#ifdef CONFIG_H8300
- h8300_ide_init();
-#endif
-}
-
-void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-{
-#ifdef CONFIG_PROC_FS
- ide_add_proc_entries(drive->proc, driver->proc, drive);
-#endif
-}
-
-EXPORT_SYMBOL(ide_register_subdriver);
-
-/**
- * ide_unregister_subdriver - disconnect drive from driver
- * @drive: drive to unplug
- * @driver: driver
- *
- * Disconnect a drive from the driver it was attached to and then
- * clean up the various proc files and other objects attached to it.
- *
- * Takes ide_setting_sem and ide_lock.
- * Caller must hold none of the locks.
- */
-
-void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-{
- unsigned long flags;
-
-#ifdef CONFIG_PROC_FS
- ide_remove_proc_entries(drive->proc, driver->proc);
-#endif
- down(&ide_setting_sem);
- spin_lock_irqsave(&ide_lock, flags);
- /*
- * ide_setting_sem protects the settings list
- * ide_lock protects the use of settings
- *
- * so we need to hold both, ide_settings_sem because we want to
- * modify the settings list, and ide_lock because we cannot take
- * a setting out that is being used.
- *
- * OTOH both ide_{read,write}_setting are only ever used under
- * ide_setting_sem.
- */
- auto_remove_settings(drive);
- spin_unlock_irqrestore(&ide_lock, flags);
- up(&ide_setting_sem);
-}
-
-EXPORT_SYMBOL(ide_unregister_subdriver);
-
-/*
- * Probe module
- */
-
EXPORT_SYMBOL(ide_lock);
static int ide_bus_match(struct device *dev, struct device_driver *drv)
return "tape";
case ide_floppy:
return "floppy";
+ case ide_optical:
+ return "optical";
default:
return "UNKNOWN";
}
return sprintf(buf, "ide:m-%s\n", media_string(drive));
}
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->model);
+}
+
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->fw_rev);
+}
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->serial_no);
+}
+
static struct device_attribute ide_dev_attrs[] = {
__ATTR_RO(media),
__ATTR_RO(drivename),
__ATTR_RO(modalias),
+ __ATTR_RO(model),
+ __ATTR_RO(firmware),
+ __ATTR(serial, 0400, serial_show, NULL),
__ATTR_NULL
};
-static int ide_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
{
ide_drive_t *drive = to_ide_device(dev);
- int i = 0;
- int length = 0;
-
- add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
- "MEDIA=%s", media_string(drive));
- add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
- "DRIVENAME=%s", drive->name);
- add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
- "MODALIAS=ide:m-%s", media_string(drive));
- envp[i] = NULL;
+
+ add_uevent_var(env, "MEDIA=%s", media_string(drive));
+ add_uevent_var(env, "DRIVENAME=%s", drive->name);
+ add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
return 0;
}
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
system_bus_speed = ide_system_bus_speed();
+ printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
+ "for PIO modes%s\n", system_bus_speed,
+ idebus_parameter ? "" : "; override with idebus=xx");
+
ret = bus_register(&ide_bus_type);
if (ret < 0) {
printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
init_ide_data();
-#ifdef CONFIG_PROC_FS
- proc_ide_root = proc_mkdir("ide", NULL);
-#endif
-
-#ifdef CONFIG_BLK_DEV_ALI14XX
- if (probe_ali14xx)
- (void)ali14xx_init();
-#endif
-#ifdef CONFIG_BLK_DEV_UMC8672
- if (probe_umc8672)
- (void)umc8672_init();
-#endif
-#ifdef CONFIG_BLK_DEV_DTC2278
- if (probe_dtc2278)
- (void)dtc2278_init();
-#endif
-#ifdef CONFIG_BLK_DEV_HT6560B
- if (probe_ht6560b)
- (void)ht6560b_init();
-#endif
-#ifdef CONFIG_BLK_DEV_QD65XX
- if (probe_qd65xx)
- (void)qd65xx_init();
-#endif
-
- initializing = 1;
- /* Probe for special PCI and other "known" interface chipsets. */
- probe_for_hwifs();
- initializing = 0;
-
-#ifdef CONFIG_PROC_FS
proc_ide_create();
-#endif
+
return 0;
}
int index;
for (index = 0; index < MAX_HWIFS; ++index)
- ide_unregister(index);
+ ide_unregister(index, 0, 0);
-#ifdef CONFIG_BLK_DEV_IDEPNP
- pnpide_exit();
-#endif
-
-#ifdef CONFIG_PROC_FS
proc_ide_destroy();
-#endif
bus_unregister(&ide_bus_type);
}