IDETAPE_DIR_WRITE = (1 << 2),
};
-struct idetape_bh {
- u32 b_size;
- atomic_t b_count;
- struct idetape_bh *b_reqnext;
- char *b_data;
-};
-
/* Tape door status */
#define DOOR_UNLOCKED 0
#define DOOR_LOCKED 1
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define IDETAPE_ERROR_GENERAL 101
-#define IDETAPE_ERROR_FILEMARK 102
-#define IDETAPE_ERROR_EOD 103
-
/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
* to an interrupt or a timer event is stored in the struct defined below.
*/
typedef struct ide_tape_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
+ ide_drive_t *drive;
+ struct ide_driver *driver;
+ struct gendisk *disk;
+ struct device dev;
- /*
- * pc points to the current processed packet command.
- *
- * failed_pc points to the last failed packet command, or contains
- * NULL if we do not need to retry any packet command. This is
- * required since an additional packet command is needed before the
- * retry, to get detailed information on what went wrong.
- */
- /* Current packet command */
- struct ide_atapi_pc *pc;
- /* Last failed packet command */
- struct ide_atapi_pc *failed_pc;
/* used by REQ_IDETAPE_{READ,WRITE} requests */
struct ide_atapi_pc queued_pc;
- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/*
* DSC polling variables.
*
/* Data buffer size chosen based on the tape's recommendation */
int buffer_size;
- /* merge buffer */
- struct idetape_bh *merge_bh;
- /* size of the merge buffer */
- int merge_bh_size;
- /* pointer to current buffer head within the merge buffer */
- struct idetape_bh *bh;
- char *b_data;
- int b_count;
-
- int pages_per_buffer;
- /* Wasted space in each stage */
- int excess_bh_size;
-
- /* protects the ide-tape queue */
- spinlock_t lock;
+ /* Staging buffer of buffer_size bytes */
+ void *buf;
+ /* The read/write cursor */
+ void *cur;
+ /* The number of valid bytes in buf */
+ size_t valid;
/* Measures average tape speed */
unsigned long avg_time;
static struct class *idetape_sysfs_class;
-#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
-
-#define ide_tape_g(disk) \
- container_of((disk)->private_data, struct ide_tape_obj, driver)
-
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
{
struct ide_tape_obj *tape = NULL;
mutex_lock(&idetape_ref_mutex);
- tape = ide_tape_g(disk);
+ tape = ide_drv_g(disk, ide_tape_obj);
if (tape) {
if (ide_device_get(tape->drive))
tape = NULL;
else
- kref_get(&tape->kref);
+ get_device(&tape->dev);
}
mutex_unlock(&idetape_ref_mutex);
return tape;
ide_drive_t *drive = tape->drive;
mutex_lock(&idetape_ref_mutex);
- kref_put(&tape->kref, ide_tape_release);
+ put_device(&tape->dev);
ide_device_put(drive);
mutex_unlock(&idetape_ref_mutex);
}
*/
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-#define ide_tape_f(file) ((file)->private_data)
-
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
{
struct ide_tape_obj *tape = NULL;
mutex_lock(&idetape_ref_mutex);
tape = idetape_devs[i];
if (tape)
- kref_get(&tape->kref);
+ get_device(&tape->dev);
mutex_unlock(&idetape_ref_mutex);
return tape;
}
-static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
-
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_input_buffers\n");
- ide_pad_transfer(drive, 0, bcount);
- return;
- }
- count = min(
- (unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
- bcount);
- drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
- atomic_read(&bh->b_count), count);
- bcount -= count;
- atomic_add(count, &bh->b_count);
- if (atomic_read(&bh->b_count) == bh->b_size) {
- bh = bh->b_reqnext;
- if (bh)
- atomic_set(&bh->b_count, 0);
- }
- }
- pc->bh = bh;
-}
-
-static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
-
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return;
- }
- count = min((unsigned int)pc->b_count, (unsigned int)bcount);
- drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
- bcount -= count;
- pc->b_data += count;
- pc->b_count -= count;
- if (!pc->b_count) {
- bh = bh->b_reqnext;
- pc->bh = bh;
- if (bh) {
- pc->b_data = bh->b_data;
- pc->b_count = atomic_read(&bh->b_count);
- }
- }
- }
-}
-
-static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
- unsigned int bcount = pc->xferred;
-
- if (pc->flags & PC_FLAG_WRITING)
- return;
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return;
- }
- count = min((unsigned int)bh->b_size, (unsigned int)bcount);
- atomic_set(&bh->b_count, count);
- if (atomic_read(&bh->b_count) == bh->b_size)
- bh = bh->b_reqnext;
- bcount -= count;
- }
- pc->bh = bh;
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->failed_pc;
+ struct ide_atapi_pc *pc = drive->failed_pc;
tape->sense_key = sense[2] & 0xF;
tape->asc = sense[12];
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
/* Correct pc->xferred by asking the tape. */
- if (pc->flags & PC_FLAG_DMA_ERROR) {
+ if (pc->flags & PC_FLAG_DMA_ERROR)
pc->xferred = pc->req_xfer -
tape->blk_size *
get_unaligned_be32(&sense[3]);
- idetape_update_buffers(drive, pc);
- }
/*
* If error was the result of a zero-length read or write command,
}
}
if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
- pc->error = IDETAPE_ERROR_FILEMARK;
+ pc->error = IDE_DRV_ERROR_FILEMARK;
pc->flags |= PC_FLAG_ABORT;
}
if (pc->c[0] == WRITE_6) {
if ((sense[2] & 0x40) || (tape->sense_key == 0xd
&& tape->asc == 0x0 && tape->ascq == 0x2)) {
- pc->error = IDETAPE_ERROR_EOD;
+ pc->error = IDE_DRV_ERROR_EOD;
pc->flags |= PC_FLAG_ABORT;
}
}
if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
if (tape->sense_key == 8) {
- pc->error = IDETAPE_ERROR_EOD;
+ pc->error = IDE_DRV_ERROR_EOD;
pc->flags |= PC_FLAG_ABORT;
}
if (!(pc->flags & PC_FLAG_ABORT) &&
}
}
-/* Free data buffers completely. */
-static void ide_tape_kfree_buffer(idetape_tape_t *tape)
-{
- struct idetape_bh *prev_bh, *bh = tape->merge_bh;
-
- while (bh) {
- u32 size = bh->b_size;
-
- while (size) {
- unsigned int order = fls(size >> PAGE_SHIFT)-1;
+static void ide_tape_handle_dsc(ide_drive_t *);
- if (bh->b_data)
- free_pages((unsigned long)bh->b_data, order);
-
- size &= (order-1);
- bh->b_data += (1 << order) * PAGE_SIZE;
- }
- prev_bh = bh;
- bh = bh->b_reqnext;
- kfree(prev_bh);
- }
-}
-
-static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
+static int ide_tape_callback(ide_drive_t *drive, int dsc)
{
- struct request *rq = HWGROUP(drive)->rq;
idetape_tape_t *tape = drive->driver_data;
- unsigned long flags;
- int error;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- switch (uptodate) {
- case 0: error = IDETAPE_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
- }
- rq->errors = error;
- if (error)
- tape->failed_pc = NULL;
-
- if (!blk_special_request(rq)) {
- ide_end_request(drive, uptodate, nr_sects);
- return 0;
- }
-
- spin_lock_irqsave(&tape->lock, flags);
-
- ide_end_drive_cmd(drive, 0, 0);
-
- spin_unlock_irqrestore(&tape->lock, flags);
- return 0;
-}
-
-static void ide_tape_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
+ struct request *rq = drive->hwif->rq;
int uptodate = pc->error ? 0 : 1;
+ int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- if (tape->failed_pc == pc)
- tape->failed_pc = NULL;
+ if (dsc)
+ ide_tape_handle_dsc(drive);
+
+ if (drive->failed_pc == pc)
+ drive->failed_pc = NULL;
if (pc->c[0] == REQUEST_SENSE) {
if (uptodate)
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
"itself - Aborting request!\n");
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
- struct request *rq = drive->hwif->hwgroup->rq;
int blocks = pc->xferred / tape->blk_size;
tape->avg_size += blocks * tape->blk_size;
}
tape->first_frame += blocks;
- rq->current_nr_sectors -= blocks;
+ rq->data_len -= blocks * tape->blk_size;
- if (pc->error)
- uptodate = pc->error;
+ if (pc->error) {
+ uptodate = 0;
+ err = pc->error;
+ }
} else if (pc->c[0] == READ_POSITION && uptodate) {
- u8 *readpos = tape->pc->buf;
+ u8 *readpos = pc->buf;
debug_log(DBG_SENSE, "BOP - %s\n",
(readpos[0] & 0x80) ? "Yes" : "No");
"to the tape\n");
clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
uptodate = 0;
+ err = IDE_DRV_ERROR_GENERAL;
} else {
debug_log(DBG_SENSE, "Block Location - %u\n",
be32_to_cpup((__be32 *)&readpos[4]));
}
}
- idetape_end_request(drive, uptodate, 0);
-}
+ rq->errors = err;
-static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = REQUEST_SENSE;
- pc->c[4] = 20;
- pc->req_xfer = 20;
-}
-
-/*
- * idetape_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
- */
-static void idetape_retry_pc(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq = &tape->request_sense_rq;
- struct ide_atapi_pc *pc = &tape->request_sense_pc;
-
- (void)ide_read_error(drive);
- idetape_create_request_sense_cmd(pc);
- set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- ide_queue_pc_head(drive, tape->disk, pc, rq);
+ return uptodate;
}
/*
* Postpone the current request so that ide.c will be able to service requests
- * from another device on the same hwgroup while we are polling for DSC.
+ * from another device on the same port while we are polling for DSC.
*/
static void idetape_postpone_request(ide_drive_t *drive)
{
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- tape->postponed_rq = HWGROUP(drive)->rq;
+ tape->postponed_rq = drive->hwif->rq;
+
ide_stall_queue(drive, tape->dsc_poll_freq);
}
idetape_postpone_request(drive);
}
-static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount, int write)
-{
- if (write)
- idetape_output_buffers(drive, pc, bcount);
- else
- idetape_input_buffers(drive, pc, bcount);
-
- return bcount;
-}
-
-/*
- * This is the usual interrupt handler which will be called during a packet
- * command. We will transfer some of the data (as requested by the drive) and
- * will re-point interrupt handler to us. When data transfer is finished, we
- * will act according to the algorithm described before
- * idetape_issue_pc.
- */
-static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
- NULL, idetape_update_buffers, idetape_retry_pc,
- ide_tape_handle_dsc, ide_tape_io_buffers);
-}
-
/*
* Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not change
+ * The current Packet Command is available in drive->pc, and will not change
* until we finish handling it. Each packet command is associated with a
* callback function that will be called when the command is finished.
*
* The handling will be done in three stages:
*
- * 1. idetape_issue_pc will send the packet command to the drive, and will set
- * the interrupt handler to idetape_pc_intr.
+ * 1. ide_tape_issue_pc will send the packet command to the drive, and will set
+ * the interrupt handler to ide_pc_intr.
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * 2. On each interrupt, ide_pc_intr will be called. This step will be
* repeated until the device signals us that no more interrupts will be issued.
*
* 3. ATAPI Tape media access commands have immediate status with a delayed
* again, the callback function will be called and then we will handle the next
* request.
*/
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- WAIT_TAPE_CMD, NULL);
-}
-
-static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
+static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
+ struct ide_cmd *cmd,
+ struct ide_atapi_pc *pc)
{
idetape_tape_t *tape = drive->driver_data;
- if (tape->pc->c[0] == REQUEST_SENSE &&
- pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
- "Two request sense in serial were issued\n");
- }
+ if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
+ drive->failed_pc = pc;
- if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
- tape->failed_pc = pc;
/* Set the current packet command */
- tape->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
+ unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
/*
* We will "abort" retrying a packet command in case legitimate
* error code was received (crossing a filemark, or end of the
tape->ascq);
}
/* Giving up */
- pc->error = IDETAPE_ERROR_GENERAL;
+ pc->error = IDE_DRV_ERROR_GENERAL;
}
- tape->failed_pc = NULL;
- drive->pc_callback(drive);
+
+ drive->failed_pc = NULL;
+ drive->pc_callback(drive, 0);
+ ide_complete_rq(drive, -EIO, done);
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
- return ide_issue_pc(drive, pc, idetape_transfer_pc,
- WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, cmd);
}
/* A mode sense command is used to "sense" tape parameters. */
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
u8 stat;
stat = hwif->tp_ops->read_status(hwif);
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
- idetape_retry_pc(drive);
+ ide_retry_pc(drive);
return ide_stopped;
}
pc->error = 0;
} else {
- pc->error = IDETAPE_ERROR_GENERAL;
- tape->failed_pc = NULL;
+ pc->error = IDE_DRV_ERROR_GENERAL;
+ drive->failed_pc = NULL;
}
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
struct ide_atapi_pc *pc, struct request *rq,
u8 opcode)
{
- struct idetape_bh *bh = (struct idetape_bh *)rq->special;
- unsigned int length = rq->current_nr_sectors;
+ unsigned int length = rq->nr_sectors;
ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->bh = bh;
pc->buf = NULL;
pc->buf_size = length * tape->blk_size;
pc->req_xfer = pc->buf_size;
if (pc->req_xfer == tape->buffer_size)
pc->flags |= PC_FLAG_DMA_OK;
- if (opcode == READ_6) {
+ if (opcode == READ_6)
pc->c[0] = READ_6;
- atomic_set(&bh->b_count, 0);
- } else if (opcode == WRITE_6) {
+ else if (opcode == WRITE_6) {
pc->c[0] = WRITE_6;
pc->flags |= PC_FLAG_WRITING;
- pc->b_data = bh->b_data;
- pc->b_count = atomic_read(&bh->b_count);
}
memcpy(rq->cmd, pc->c, 12);
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc = NULL;
struct request *postponed_rq = tape->postponed_rq;
+ struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
- " current_nr_sectors: %u\n",
- (unsigned long long)rq->sector, rq->nr_sectors,
- rq->current_nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n",
+ (unsigned long long)rq->sector, rq->nr_sectors);
- if (!blk_special_request(rq)) {
+ if (!(blk_special_request(rq) || blk_sense_request(rq))) {
/* We do not support buffer cache originated requests. */
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
"request queue (%d)\n", drive->name, rq->cmd_type);
- ide_end_request(drive, 0, 0);
+ if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ rq->errors = -EIO;
+ ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
return ide_stopped;
}
/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
- pc = tape->failed_pc;
+ if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
+ pc = drive->failed_pc;
goto out;
}
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
"Two DSC requests were queued\n");
- idetape_end_request(drive, 0, 0);
+ drive->failed_pc = NULL;
+ rq->errors = 0;
+ ide_complete_rq(drive, 0, blk_rq_bytes(rq));
return ide_stopped;
}
*/
stat = hwif->tp_ops->read_status(hwif);
- if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
+ if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
+ (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- if (drive->post_reset == 1) {
+ if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- drive->post_reset = 0;
+ drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_PC1) {
- pc = (struct ide_atapi_pc *) rq->buffer;
+ pc = (struct ide_atapi_pc *)rq->special;
rq->cmd[13] &= ~(REQ_IDETAPE_PC1);
rq->cmd[13] |= REQ_IDETAPE_PC2;
goto out;
BUG();
out:
- return idetape_issue_pc(drive, pc);
-}
+ /* prepare sense request for this command */
+ ide_prep_sense(drive, rq);
-/*
- * The function below uses __get_free_pages to allocate a data buffer of size
- * tape->buffer_size (or a bit more). We attempt to combine sequential pages as
- * much as possible.
- *
- * It returns a pointer to the newly allocated buffer, or NULL in case of
- * failure.
- */
-static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
- int full, int clear)
-{
- struct idetape_bh *prev_bh, *bh, *merge_bh;
- int pages = tape->pages_per_buffer;
- unsigned int order, b_allocd;
- char *b_data = NULL;
-
- merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
- bh = merge_bh;
- if (bh == NULL)
- goto abort;
-
- order = fls(pages) - 1;
- bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order);
- if (!bh->b_data)
- goto abort;
- b_allocd = (1 << order) * PAGE_SIZE;
- pages &= (order-1);
-
- if (clear)
- memset(bh->b_data, 0, b_allocd);
- bh->b_reqnext = NULL;
- bh->b_size = b_allocd;
- atomic_set(&bh->b_count, full ? bh->b_size : 0);
-
- while (pages) {
- order = fls(pages) - 1;
- b_data = (char *) __get_free_pages(GFP_KERNEL, order);
- if (!b_data)
- goto abort;
- b_allocd = (1 << order) * PAGE_SIZE;
-
- if (clear)
- memset(b_data, 0, b_allocd);
-
- /* newly allocated page frames below buffer header or ...*/
- if (bh->b_data == b_data + b_allocd) {
- bh->b_size += b_allocd;
- bh->b_data -= b_allocd;
- if (full)
- atomic_add(b_allocd, &bh->b_count);
- continue;
- }
- /* they are above the header */
- if (b_data == bh->b_data + bh->b_size) {
- bh->b_size += b_allocd;
- if (full)
- atomic_add(b_allocd, &bh->b_count);
- continue;
- }
- prev_bh = bh;
- bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
- if (!bh) {
- free_pages((unsigned long) b_data, order);
- goto abort;
- }
- bh->b_reqnext = NULL;
- bh->b_data = b_data;
- bh->b_size = b_allocd;
- atomic_set(&bh->b_count, full ? bh->b_size : 0);
- prev_bh->b_reqnext = bh;
+ memset(&cmd, 0, sizeof(cmd));
- pages &= (order-1);
- }
+ if (rq_data_dir(rq))
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
- bh->b_size -= tape->excess_bh_size;
- if (full)
- atomic_sub(tape->excess_bh_size, &bh->b_count);
- return merge_bh;
-abort:
- ide_tape_kfree_buffer(tape);
- return NULL;
-}
+ cmd.rq = rq;
-static int idetape_copy_stage_from_user(idetape_tape_t *tape,
- const char __user *buf, int n)
-{
- struct idetape_bh *bh = tape->bh;
- int count;
- int ret = 0;
-
- while (n) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return 1;
- }
- count = min((unsigned int)
- (bh->b_size - atomic_read(&bh->b_count)),
- (unsigned int)n);
- if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
- count))
- ret = 1;
- n -= count;
- atomic_add(count, &bh->b_count);
- buf += count;
- if (atomic_read(&bh->b_count) == bh->b_size) {
- bh = bh->b_reqnext;
- if (bh)
- atomic_set(&bh->b_count, 0);
- }
- }
- tape->bh = bh;
- return ret;
-}
+ ide_init_sg_cmd(&cmd, pc->req_xfer);
+ ide_map_sg(drive, &cmd);
-static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
- int n)
-{
- struct idetape_bh *bh = tape->bh;
- int count;
- int ret = 0;
-
- while (n) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return 1;
- }
- count = min(tape->b_count, n);
- if (copy_to_user(buf, tape->b_data, count))
- ret = 1;
- n -= count;
- tape->b_data += count;
- tape->b_count -= count;
- buf += count;
- if (!tape->b_count) {
- bh = bh->b_reqnext;
- tape->bh = bh;
- if (bh) {
- tape->b_data = bh->b_data;
- tape->b_count = atomic_read(&bh->b_count);
- }
- }
- }
- return ret;
-}
-
-static void idetape_init_merge_buffer(idetape_tape_t *tape)
-{
- struct idetape_bh *bh = tape->merge_bh;
- tape->bh = tape->merge_bh;
-
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
- atomic_set(&bh->b_count, 0);
- else {
- tape->b_data = bh->b_data;
- tape->b_count = atomic_read(&bh->b_count);
- }
+ return ide_tape_issue_pc(drive, &cmd, pc);
}
/*
return;
clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
- tape->merge_bh_size = 0;
- if (tape->merge_bh != NULL) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ tape->valid = 0;
+ if (tape->buf != NULL) {
+ kfree(tape->buf);
+ tape->buf = NULL;
}
tape->chrdev_dir = IDETAPE_DIR_NONE;
* Generate a read/write request for the block device interface and wait for it
* to be serviced.
*/
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
- struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq;
- int ret, errors;
+ int ret;
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+ BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
+ BUG_ON(size < 0 || size % tape->blk_size);
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd[13] = cmd;
rq->rq_disk = tape->disk;
- rq->special = (void *)bh;
rq->sector = tape->first_frame;
- rq->nr_sectors = blocks;
- rq->current_nr_sectors = blocks;
- blk_execute_rq(drive->queue, tape->disk, rq, 0);
- errors = rq->errors;
- ret = tape->blk_size * (blocks - rq->current_nr_sectors);
- blk_put_request(rq);
+ if (size) {
+ ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
+ __GFP_WAIT);
+ if (ret)
+ goto out_put;
+ }
- if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
- return 0;
+ blk_execute_rq(drive->queue, tape->disk, rq, 0);
- if (tape->merge_bh)
- idetape_init_merge_buffer(tape);
- if (errors == IDETAPE_ERROR_GENERAL)
- return -EIO;
+ /* calculate the number of transferred bytes and update buffer state */
+ size -= rq->data_len;
+ tape->cur = tape->buf;
+ if (cmd == REQ_IDETAPE_READ)
+ tape->valid = size;
+ else
+ tape->valid = 0;
+
+ ret = size;
+ if (rq->errors == IDE_DRV_ERROR_GENERAL)
+ ret = -EIO;
+out_put:
+ blk_put_request(rq);
return ret;
}
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-/* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
-
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
- blocks, tape->merge_bh);
-}
-
static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- int blocks, min;
- struct idetape_bh *bh;
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
" but we are not writing.\n");
return;
}
- if (tape->merge_bh_size > tape->buffer_size) {
- printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
- tape->merge_bh_size = tape->buffer_size;
- }
- if (tape->merge_bh_size) {
- blocks = tape->merge_bh_size / tape->blk_size;
- if (tape->merge_bh_size % tape->blk_size) {
- unsigned int i;
-
- blocks++;
- i = tape->blk_size - tape->merge_bh_size %
- tape->blk_size;
- bh = tape->bh->b_reqnext;
- while (bh) {
- atomic_set(&bh->b_count, 0);
- bh = bh->b_reqnext;
- }
- bh = tape->bh;
- while (i) {
- if (bh == NULL) {
- printk(KERN_INFO "ide-tape: bug,"
- " bh NULL\n");
- break;
- }
- min = min(i, (unsigned int)(bh->b_size -
- atomic_read(&bh->b_count)));
- memset(bh->b_data + atomic_read(&bh->b_count),
- 0, min);
- atomic_add(min, &bh->b_count);
- i -= min;
- bh = bh->b_reqnext;
- }
- }
- (void) idetape_add_chrdev_write_request(drive, blocks);
- tape->merge_bh_size = 0;
- }
- if (tape->merge_bh != NULL) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ if (tape->buf) {
+ size_t aligned = roundup(tape->valid, tape->blk_size);
+
+ memset(tape->cur, 0, aligned - tape->valid);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
+ kfree(tape->buf);
+ tape->buf = NULL;
}
tape->chrdev_dir = IDETAPE_DIR_NONE;
}
-static int idetape_init_read(ide_drive_t *drive)
+static int idetape_init_rw(ide_drive_t *drive, int dir)
{
idetape_tape_t *tape = drive->driver_data;
- int bytes_read;
-
- /* Initialize read operation */
- if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
- ide_tape_flush_merge_buffer(drive);
- idetape_flush_tape_buffers(drive);
- }
- if (tape->merge_bh || tape->merge_bh_size) {
- printk(KERN_ERR "ide-tape: merge_bh_size should be"
- " 0 now\n");
- tape->merge_bh_size = 0;
- }
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
- if (!tape->merge_bh)
- return -ENOMEM;
- tape->chrdev_dir = IDETAPE_DIR_READ;
+ int rc;
- /*
- * Issue a read 0 command to ensure that DSC handshake is
- * switched from completion mode to buffer available mode.
- * No point in issuing this if DSC overlap isn't supported, some
- * drives (Seagate STT3401A) will return an error.
- */
- if (drive->dsc_overlap) {
- bytes_read = idetape_queue_rw_tail(drive,
- REQ_IDETAPE_READ, 0,
- tape->merge_bh);
- if (bytes_read < 0) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
- return bytes_read;
- }
- }
- }
+ BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
- return 0;
-}
+ if (tape->chrdev_dir == dir)
+ return 0;
-/* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
-{
- idetape_tape_t *tape = drive->driver_data;
+ if (tape->chrdev_dir == IDETAPE_DIR_READ)
+ ide_tape_discard_merge_buffer(drive, 1);
+ else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
+ ide_tape_flush_merge_buffer(drive);
+ idetape_flush_tape_buffers(drive);
+ }
- debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
+ if (tape->buf || tape->valid) {
+ printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+ tape->valid = 0;
+ }
- /* If we are at a filemark, return a read length of 0 */
- if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
- return 0;
+ tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+ if (!tape->buf)
+ return -ENOMEM;
+ tape->chrdev_dir = dir;
+ tape->cur = tape->buf;
- idetape_init_read(drive);
+ /*
+ * Issue a 0 rw command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode. No
+ * point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
+ */
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
+ int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
+ : REQ_IDETAPE_WRITE;
+
+ rc = idetape_queue_rw_tail(drive, cmd, 0);
+ if (rc < 0) {
+ kfree(tape->buf);
+ tape->buf = NULL;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
+ return rc;
+ }
+ }
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
- tape->merge_bh);
+ return 0;
}
static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
{
idetape_tape_t *tape = drive->driver_data;
- struct idetape_bh *bh;
- int blocks;
+
+ memset(tape->buf, 0, tape->buffer_size);
while (bcount) {
- unsigned int count;
+ unsigned int count = min(tape->buffer_size, bcount);
- bh = tape->merge_bh;
- count = min(tape->buffer_size, bcount);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
bcount -= count;
- blocks = count / tape->blk_size;
- while (count) {
- atomic_set(&bh->b_count,
- min(count, (unsigned int)bh->b_size));
- memset(bh->b_data, 0, atomic_read(&bh->b_count));
- count -= atomic_read(&bh->b_count);
- bh = bh->b_reqnext;
- }
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
- tape->merge_bh);
}
}
}
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
- tape->merge_bh_size = 0;
+ tape->valid = 0;
if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
++count;
ide_tape_discard_merge_buffer(drive, 0);
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
- ssize_t bytes_read, temp, actually_read = 0, rc;
+ size_t done = 0;
ssize_t ret = 0;
- u16 ctl = *(u16 *)&tape->caps[12];
+ int rc;
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
}
- rc = idetape_init_read(drive);
+
+ rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
if (rc < 0)
return rc;
- if (count == 0)
- return (0);
- if (tape->merge_bh_size) {
- actually_read = min((unsigned int)(tape->merge_bh_size),
- (unsigned int)count);
- if (idetape_copy_stage_to_user(tape, buf, actually_read))
- ret = -EFAULT;
- buf += actually_read;
- tape->merge_bh_size -= actually_read;
- count -= actually_read;
- }
- while (count >= tape->buffer_size) {
- bytes_read = idetape_add_chrdev_read_request(drive, ctl);
- if (bytes_read <= 0)
- goto finish;
- if (idetape_copy_stage_to_user(tape, buf, bytes_read))
- ret = -EFAULT;
- buf += bytes_read;
- count -= bytes_read;
- actually_read += bytes_read;
- }
- if (count) {
- bytes_read = idetape_add_chrdev_read_request(drive, ctl);
- if (bytes_read <= 0)
- goto finish;
- temp = min((unsigned long)count, (unsigned long)bytes_read);
- if (idetape_copy_stage_to_user(tape, buf, temp))
+
+ while (done < count) {
+ size_t todo;
+
+ /* refill if staging buffer is empty */
+ if (!tape->valid) {
+ /* If we are at a filemark, nothing more to read */
+ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+ break;
+ /* read */
+ if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
+ tape->buffer_size) <= 0)
+ break;
+ }
+
+ /* copy out */
+ todo = min_t(size_t, count - done, tape->valid);
+ if (copy_to_user(buf + done, tape->cur, todo))
ret = -EFAULT;
- actually_read += temp;
- tape->merge_bh_size = bytes_read-temp;
+
+ tape->cur += todo;
+ tape->valid -= todo;
+ done += todo;
}
-finish:
- if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+
+ if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
idetape_space_over_filemarks(drive, MTFSF, 1);
return 0;
}
- return ret ? ret : actually_read;
+ return ret ? ret : done;
}
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
- ssize_t actually_written = 0;
+ size_t done = 0;
ssize_t ret = 0;
- u16 ctl = *(u16 *)&tape->caps[12];
+ int rc;
/* The drive is write protected. */
if (tape->write_prot)
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
/* Initialize write operation */
- if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
- if (tape->chrdev_dir == IDETAPE_DIR_READ)
- ide_tape_discard_merge_buffer(drive, 1);
- if (tape->merge_bh || tape->merge_bh_size) {
- printk(KERN_ERR "ide-tape: merge_bh_size "
- "should be 0 now\n");
- tape->merge_bh_size = 0;
- }
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
- if (!tape->merge_bh)
- return -ENOMEM;
- tape->chrdev_dir = IDETAPE_DIR_WRITE;
- idetape_init_merge_buffer(tape);
+ rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
+ if (rc < 0)
+ return rc;
- /*
- * Issue a write 0 command to ensure that DSC handshake is
- * switched from completion mode to buffer available mode. No
- * point in issuing this if DSC overlap isn't supported, some
- * drives (Seagate STT3401A) will return an error.
- */
- if (drive->dsc_overlap) {
- ssize_t retval = idetape_queue_rw_tail(drive,
- REQ_IDETAPE_WRITE, 0,
- tape->merge_bh);
- if (retval < 0) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
- return retval;
- }
- }
- }
- if (count == 0)
- return (0);
- if (tape->merge_bh_size) {
- if (tape->merge_bh_size >= tape->buffer_size) {
- printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
- tape->merge_bh_size = 0;
- }
- actually_written = min((unsigned int)
- (tape->buffer_size - tape->merge_bh_size),
- (unsigned int)count);
- if (idetape_copy_stage_from_user(tape, buf, actually_written))
- ret = -EFAULT;
- buf += actually_written;
- tape->merge_bh_size += actually_written;
- count -= actually_written;
-
- if (tape->merge_bh_size == tape->buffer_size) {
- ssize_t retval;
- tape->merge_bh_size = 0;
- retval = idetape_add_chrdev_write_request(drive, ctl);
- if (retval <= 0)
- return (retval);
- }
- }
- while (count >= tape->buffer_size) {
- ssize_t retval;
- if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size))
- ret = -EFAULT;
- buf += tape->buffer_size;
- count -= tape->buffer_size;
- retval = idetape_add_chrdev_write_request(drive, ctl);
- actually_written += tape->buffer_size;
- if (retval <= 0)
- return (retval);
- }
- if (count) {
- actually_written += count;
- if (idetape_copy_stage_from_user(tape, buf, count))
+ while (done < count) {
+ size_t todo;
+
+ /* flush if staging buffer is full */
+ if (tape->valid == tape->buffer_size &&
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+ tape->buffer_size) <= 0)
+ return rc;
+
+ /* copy in */
+ todo = min_t(size_t, count - done,
+ tape->buffer_size - tape->valid);
+ if (copy_from_user(tape->cur, buf + done, todo))
ret = -EFAULT;
- tape->merge_bh_size += count;
+
+ tape->cur += todo;
+ tape->valid += todo;
+ done += todo;
}
- return ret ? ret : actually_written;
+
+ return ret ? ret : done;
}
static int idetape_write_filemark(ide_drive_t *drive)
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
struct mtop mtop;
struct mtget mtget;
idetape_flush_tape_buffers(drive);
}
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
- block_offset = tape->merge_bh_size /
+ block_offset = tape->valid /
(tape->blk_size * tape->user_bs_factor);
position = idetape_read_position(drive);
if (position < 0)
idetape_tape_t *tape = drive->driver_data;
ide_tape_flush_merge_buffer(drive);
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0);
- if (tape->merge_bh != NULL) {
+ tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+ if (tape->buf != NULL) {
idetape_pad_zeros(drive, tape->blk_size *
(tape->user_bs_factor - 1));
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ kfree(tape->buf);
+ tape->buf = NULL;
}
idetape_write_filemark(drive);
idetape_flush_tape_buffers(drive);
static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
- struct ide_tape_obj *tape = ide_tape_f(filp);
+ struct ide_tape_obj *tape = filp->private_data;
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
+ u8 pc_buf[256];
char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
+ pc.buf = &pc_buf[0];
+ pc.buf_size = sizeof(pc_buf);
+
if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
tape->name);
/* device lacks locking support according to capabilities page */
if ((caps[6] & 1) == 0)
- drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
if (caps[7] & 0x02)
tape->blk_size = 512;
static int divf_buffer(ide_drive_t *drive) { return 2; }
static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
-ide_devset_rw_field(dsc_overlap, dsc_overlap);
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
ide_tape_devset_rw_field(debug_mask, debug_mask);
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
mulf_tdsc, divf_tdsc),
- { 0 },
+ { NULL },
};
#endif
unsigned long t;
int speed;
int buffer_size;
- u8 gcw[2];
u16 *ctl = (u16 *)&tape->caps[12];
- drive->pc_callback = ide_tape_callback;
+ drive->pc_callback = ide_tape_callback;
+
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
- spin_lock_init(&tape->lock);
- drive->dsc_overlap = 1;
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
tape->name);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
+
/* Seagate Travan drives do not support DSC overlap. */
if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
-
- /* Command packet DRQ type */
- if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
-
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
tape->buffer_size = *ctl * tape->blk_size;
}
buffer_size = tape->buffer_size;
- tape->pages_per_buffer = buffer_size / PAGE_SIZE;
- if (buffer_size % PAGE_SIZE) {
- tape->pages_per_buffer++;
- tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE;
- }
/* select the "best" DSC read/write polling freq */
speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
tape->buffer_size / 1024,
tape->best_dsc_rw_freq * 1000 / HZ,
- drive->using_dma ? ", DMA":"");
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
ide_proc_register_driver(drive, tape->driver);
}
idetape_tape_t *tape = drive->driver_data;
ide_proc_unregister_driver(drive, tape->driver);
-
+ device_del(&tape->dev);
ide_unregister_region(tape->disk);
- ide_tape_put(tape);
+ mutex_lock(&idetape_ref_mutex);
+ put_device(&tape->dev);
+ mutex_unlock(&idetape_ref_mutex);
}
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
{
- struct ide_tape_obj *tape = to_ide_tape(kref);
+ struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
- BUG_ON(tape->merge_bh_size);
+ BUG_ON(tape->valid);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
device_destroy(idetape_sysfs_class,
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
{ NULL, 0, NULL, NULL }
};
+
+static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
+{
+ return idetape_proc;
+}
+
+static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
+{
+ return idetape_settings;
+}
#endif
static int ide_tape_probe(ide_drive_t *);
-static ide_driver_t idetape_driver = {
+static struct ide_driver idetape_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-tape",
.probe = ide_tape_probe,
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
- .media = ide_tape,
.do_request = idetape_do_request,
- .end_request = idetape_end_request,
- .error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idetape_proc,
- .settings = idetape_settings,
+ .proc_entries = ide_tape_proc_entries,
+ .proc_devsets = ide_tape_proc_devsets,
#endif
};
.release = idetape_chrdev_release,
};
-static int idetape_open(struct inode *inode, struct file *filp)
+static int idetape_open(struct block_device *bdev, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape;
+ struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
- tape = ide_tape_get(disk);
if (!tape)
return -ENXIO;
return 0;
}
-static int idetape_release(struct inode *inode, struct file *filp)
+static int idetape_release(struct gendisk *disk, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape = ide_tape_g(disk);
+ struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
ide_tape_put(tape);
-
return 0;
}
-static int idetape_ioctl(struct inode *inode, struct file *file,
+static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
- struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk);
+ struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
- int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+ int err = generic_ide_ioctl(drive, bdev, cmd, arg);
if (err == -EINVAL)
err = idetape_blkdev_ioctl(drive, cmd, arg);
return err;
.owner = THIS_MODULE,
.open = idetape_open,
.release = idetape_release,
- .ioctl = idetape_ioctl,
+ .locked_ioctl = idetape_ioctl,
};
static int ide_tape_probe(ide_drive_t *drive)
if (drive->media != ide_tape)
goto failed;
- if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
+ ide_check_atapi_device(drive, DRV_NAME) == 0) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
ide_init_disk(g, drive);
- kref_init(&tape->kref);
+ tape->dev.parent = &drive->gendev;
+ tape->dev.release = ide_tape_release;
+ dev_set_name(&tape->dev, dev_name(&drive->gendev));
+
+ if (device_register(&tape->dev))
+ goto out_free_disk;
tape->drive = drive;
tape->driver = &idetape_driver;
idetape_setup(drive, tape, minor);
- device_create_drvdata(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor), NULL,
- "%s", tape->name);
- device_create_drvdata(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
- "n%s", tape->name);
+ device_create(idetape_sysfs_class, &drive->gendev,
+ MKDEV(IDETAPE_MAJOR, minor), NULL, "%s", tape->name);
+ device_create(idetape_sysfs_class, &drive->gendev,
+ MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
+ "n%s", tape->name);
g->fops = &idetape_block_ops;
ide_register_region(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_tape:
kfree(tape);
failed: