int rc;
u8 cmd;
- /*
- * In order to keep things simple we have an id
- * block for all drives at all times. If the device
- * is pre ATA or refuses ATA/ATAPI identify we
- * will add faked data to this.
- *
- * Also note that 0 everywhere means "can't do X"
- */
-
drive->dev_flags &= ~IDE_DFLAG_ID_READ;
- drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
- if (drive->id == NULL) {
- printk(KERN_ERR "ide: out of memory for id data.\n");
- return 0;
- }
-
m = (char *)&drive->id[ATA_ID_PROD];
strcpy(m, "UNKNOWN");
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- goto out_free;
+ return 0;
/* identification failed? */
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- goto out_free;
+ return 0;
/* The drive wasn't being helpful. Add generic info only */
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
}
return 1;
-out_free:
- kfree(drive->id);
- return 0;
}
static void hwif_release_dev(struct device *dev)
if (irqd)
disable_irq(hwif->irq);
- if (ide_port_wait_ready(hwif) == -EBUSY)
- printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+ rc = ide_port_wait_ready(hwif);
+ if (rc == -ENODEV) {
+ printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
+ goto out;
+ } else if (rc == -EBUSY)
+ printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
+ else
+ rc = -ENODEV;
/*
* Second drive should only exist if first drive was found,
if (drive->dev_flags & IDE_DFLAG_PRESENT)
rc = 0;
}
-
+out:
/*
* Use cached IRQ number. It might be (and is...) changed by probe
* code above
int i;
ide_port_for_each_present_dev(i, drive, hwif) {
+ ide_check_nien_quirk_list(drive);
+
if (port_ops && port_ops->quirkproc)
port_ops->quirkproc(drive);
}
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
- kfree(drive->id);
- drive->id = NULL;
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
continue;
}
blk_cleanup_queue(drive->queue);
drive->queue = NULL;
- kfree(drive->id);
- drive->id = NULL;
-
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
complete(&drive->gendev_rel_comp);
ide_port_for_each_dev(i, drive, hwif) {
u8 j = (hwif->index * MAX_DRIVES) + i;
+ u16 *saved_id = drive->id;
memset(drive, 0, sizeof(*drive));
+ memset(saved_id, 0, SECTOR_SIZE);
+ drive->id = saved_id;
drive->media = ide_disk;
drive->select = (i << 4) | ATA_DEVICE_OBS;
ide_drive_t *drive;
int i;
- ide_port_for_each_dev(i, drive, hwif)
+ ide_port_for_each_dev(i, drive, hwif) {
+ kfree(drive->id);
kfree(drive);
+ }
}
static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
if (drive == NULL)
goto out_nomem;
+ /*
+ * In order to keep things simple we have an id
+ * block for all drives at all times. If the device
+ * is pre ATA or refuses ATA/ATAPI identify we
+ * will add faked data to this.
+ *
+ * Also note that 0 everywhere means "can't do X"
+ */
+ drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+ if (drive->id == NULL)
+ goto out_nomem;
+
hwif->devices[i] = drive;
}
return 0;
if (idx < 0) {
printk(KERN_ERR "%s: no free slot for interface\n",
d ? d->name : "ide");
+ ide_port_free_devices(hwif);
kfree(hwif);
continue;
}
ide_init_port(hwif, i & 1, d);
ide_port_cable_detect(hwif);
+
+ hwif->port_flags |= IDE_PFLAG_PROBING;
+
ide_port_init_devices(hwif);
}
if (ide_probe_port(hwif) == 0)
hwif->present = 1;
+ hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 ||
hwif->mate == NULL || hwif->mate->present == 0) {
if (ide_register_port(hwif)) {
void ide_port_scan(ide_hwif_t *hwif)
{
+ int rc;
+
ide_port_apply_params(hwif);
ide_port_cable_detect(hwif);
+
+ hwif->port_flags |= IDE_PFLAG_PROBING;
+
ide_port_init_devices(hwif);
- if (ide_probe_port(hwif) < 0)
+ rc = ide_probe_port(hwif);
+
+ hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
+ if (rc < 0)
return;
hwif->present = 1;