drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
if (drive->mult_req)
- drive->special.b.set_multmode = 1;
+ drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
}
}
* do_identify - identify a drive
* @drive: drive to identify
* @cmd: command used
+ * @id: buffer for IDENTIFY data
*
* Called when we have issued a drive identify command to
* read and parse the results. This function is run with
* interrupts disabled.
*/
-static void do_identify(ide_drive_t *drive, u8 cmd)
+static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id)
{
ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
char *m = (char *)&id[ATA_ID_PROD];
unsigned long flags;
int bswap = 1;
m[ATA_ID_PROD_LEN - 1] = '\0';
if (strstr(m, "E X A B Y T E N E S T"))
- goto err_misc;
-
- drive->dev_flags |= IDE_DFLAG_PRESENT;
- drive->dev_flags &= ~IDE_DFLAG_DEAD;
-
- /*
- * Check for an ATAPI device
- */
- if (cmd == ATA_CMD_ID_ATAPI)
- ide_classify_atapi_dev(drive);
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
else
- /*
- * Not an ATAPI device: looks like a "regular" hard disk
- */
- ide_classify_ata_dev(drive);
- return;
-err_misc:
- kfree(id);
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
+ drive->dev_flags |= IDE_DFLAG_PRESENT;
}
/**
- * actual_try_to_identify - send ata/atapi identify
+ * ide_dev_read_id - send ATA/ATAPI IDENTIFY command
* @drive: drive to identify
* @cmd: command to use
+ * @id: buffer for IDENTIFY data
+ * @irq_ctx: flag set when called from the IRQ context
*
- * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive
- * and waits for a response. It also monitors irqs while this is
- * happening, in hope of automatically determining which one is
- * being used by the interface.
+ * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response.
*
* Returns: 0 device was identified
* 1 device timed-out (no response to identify request)
* 2 device aborted the command (refused to identify itself)
*/
-static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
+int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
unsigned long timeout;
u8 s = 0, a = 0;
+ /*
+ * Disable device IRQ. Otherwise we'll get spurious interrupts
+ * during the identify phase that the IRQ handler isn't expecting.
+ */
+ if (io_ports->ctl_addr)
+ tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS);
+
/* take a deep breath */
- msleep(50);
+ if (irq_ctx)
+ mdelay(50);
+ else
+ msleep(50);
if (io_ports->ctl_addr &&
(hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
* identify command to be sure of reply
*/
if (cmd == ATA_CMD_ID_ATAPI) {
- ide_task_t task;
+ struct ide_taskfile tf;
- memset(&task, 0, sizeof(task));
+ memset(&tf, 0, sizeof(tf));
/* disable DMA & overlap */
- task.tf_flags = IDE_TFLAG_OUT_FEATURE;
-
- tp_ops->tf_load(drive, &task);
+ tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE);
}
/* ask drive for ID */
timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- if (ide_busy_sleep(hwif, timeout, use_altstatus))
- return 1;
-
/* wait for IRQ and ATA_DRQ */
- msleep(50);
- s = tp_ops->read_status(hwif);
+ if (irq_ctx) {
+ rc = __ide_wait_stat(drive, ATA_DRQ, BAD_R_STAT, timeout, &s);
+ if (rc)
+ return 1;
+ } else {
+ rc = ide_busy_sleep(drive, timeout, use_altstatus);
+ if (rc)
+ return 1;
+
+ msleep(50);
+ s = tp_ops->read_status(hwif);
+ }
if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
/* drive returned ID */
- do_identify(drive, cmd);
+ do_identify(drive, cmd, id);
/* drive responded with ID */
rc = 0;
/* clear drive IRQ */
return rc;
}
-/**
- * try_to_identify - try to identify a drive
- * @drive: drive to probe
- * @cmd: command to use
- *
- * Issue the identify command and then do IRQ probing to
- * complete the identification when needed by finding the
- * IRQ the drive is attached to
- */
-
-static int try_to_identify (ide_drive_t *drive, u8 cmd)
+int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
{
ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- int retval;
- int autoprobe = 0;
- unsigned long cookie = 0;
-
- /*
- * Disable device irq unless we need to
- * probe for it. Otherwise we'll get spurious
- * interrupts during the identify-phase that
- * the irq handler isn't expecting.
- */
- if (hwif->io_ports.ctl_addr) {
- if (!hwif->irq) {
- autoprobe = 1;
- cookie = probe_irq_on();
- }
- tp_ops->set_irq(hwif, autoprobe);
- }
-
- retval = actual_try_to_identify(drive, cmd);
-
- if (autoprobe) {
- int irq;
-
- tp_ops->set_irq(hwif, 0);
- /* clear drive IRQ */
- (void)tp_ops->read_status(hwif);
- udelay(5);
- irq = probe_irq_off(cookie);
- if (!hwif->irq) {
- if (irq > 0) {
- hwif->irq = irq;
- } else {
- /* Mmmm.. multiple IRQs..
- * don't know which was ours
- */
- printk(KERN_ERR "%s: IRQ probe failed (0x%lx)\n",
- drive->name, cookie);
- }
- }
- }
- return retval;
-}
-
-int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
-{
u8 stat;
timeout += jiffies;
return 0;
} while (time_before(jiffies, timeout));
+ printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
+
return 1; /* drive timed-out */
}
static u8 ide_read_device(ide_drive_t *drive)
{
- ide_task_t task;
+ struct ide_taskfile tf;
- memset(&task, 0, sizeof(task));
- task.tf_flags = IDE_TFLAG_IN_DEVICE;
+ drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE);
- drive->hwif->tp_ops->tf_read(drive, &task);
-
- return task.tf.device;
+ return tf.device;
}
/**
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ u16 *id = drive->id;
int rc;
u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat;
* (e.g. crw9624 as drive0 with disk as slave)
*/
msleep(50);
- SELECT_DRIVE(drive);
+ tp_ops->dev_select(drive);
msleep(50);
if (ide_read_device(drive) != drive->select && present == 0) {
if (drive->dn & 1) {
/* exit with drive0 selected */
- SELECT_DRIVE(hwif->devices[0]);
+ tp_ops->dev_select(hwif->devices[0]);
/* allow ATA_BUSY to assert & clear */
msleep(50);
}
if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
present || cmd == ATA_CMD_ID_ATAPI) {
- /* send cmd and wait */
- if ((rc = try_to_identify(drive, cmd))) {
+ rc = ide_dev_read_id(drive, cmd, id, 0);
+ if (rc)
/* failed: try again */
- rc = try_to_identify(drive,cmd);
- }
+ rc = ide_dev_read_id(drive, cmd, id, 0);
stat = tp_ops->read_status(hwif);
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
- SELECT_DRIVE(drive);
+ tp_ops->dev_select(drive);
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
- rc = try_to_identify(drive, cmd);
+ (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
+ rc = ide_dev_read_id(drive, cmd, id, 0);
}
/* ensure drive IRQ is clear */
}
if (drive->dn & 1) {
/* exit with drive0 selected */
- SELECT_DRIVE(hwif->devices[0]);
+ tp_ops->dev_select(hwif->devices[0]);
msleep(50);
/* ensure drive irq is clear */
(void)tp_ops->read_status(hwif);
return rc;
}
-/*
- *
- */
-static void enable_nest (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- u8 stat;
-
- printk(KERN_INFO "%s: enabling %s -- ",
- hwif->name, (char *)&drive->id[ATA_ID_PROD]);
-
- SELECT_DRIVE(drive);
- msleep(50);
- tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST);
-
- if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) {
- printk(KERN_CONT "failed (timeout)\n");
- return;
- }
-
- msleep(50);
-
- stat = tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, 0, BAD_STAT))
- printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
- else
- printk(KERN_CONT "success\n");
-}
-
/**
* probe_for_drives - upper level drive probe
* @drive: drive to probe for
static u8 probe_for_drive(ide_drive_t *drive)
{
char *m;
+ int rc;
+ u8 cmd;
- /*
- * In order to keep things simple we have an id
- * block for all drives at all times. If the device
- * is pre ATA or refuses ATA/ATAPI identify we
- * will add faked data to this.
- *
- * Also note that 0 everywhere means "can't do X"
- */
-
drive->dev_flags &= ~IDE_DFLAG_ID_READ;
- drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
- if (drive->id == NULL) {
- printk(KERN_ERR "ide: out of memory for id data.\n");
- return 0;
- }
-
m = (char *)&drive->id[ATA_ID_PROD];
strcpy(m, "UNKNOWN");
/* skip probing? */
if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) {
-retry:
/* if !(success||timed-out) */
- if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
+ cmd = ATA_CMD_ID_ATA;
+ rc = do_probe(drive, cmd);
+ if (rc >= 2) {
/* look for ATAPI device */
- (void)do_probe(drive, ATA_CMD_ID_ATAPI);
+ cmd = ATA_CMD_ID_ATAPI;
+ rc = do_probe(drive, cmd);
+ }
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- /* drive not found */
return 0;
- if (strstr(m, "E X A B Y T E N E S T")) {
- enable_nest(drive);
- goto retry;
- }
-
/* identification failed? */
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
if (drive->media == ide_disk) {
printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
}
+ } else {
+ if (cmd == ATA_CMD_ID_ATAPI)
+ ide_classify_atapi_dev(drive);
+ else
+ ide_classify_ata_dev(drive);
}
- /* drive was found */
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
ide_disk_init_mult_count(drive);
}
- return !!(drive->dev_flags & IDE_DFLAG_PRESENT);
+ return 1;
}
static void hwif_release_dev(struct device *dev)
/* register with global device tree */
dev_set_name(&hwif->gendev, hwif->name);
- hwif->gendev.driver_data = hwif;
+ dev_set_drvdata(&hwif->gendev, hwif);
if (hwif->gendev.parent == NULL)
hwif->gendev.parent = hwif->dev;
hwif->gendev.release = hwif_release_dev;
static int ide_port_wait_ready(ide_hwif_t *hwif)
{
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
ide_drive_t *drive;
int i, rc;
/* Ignore disks that we will not probe for later. */
if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 ||
(drive->dev_flags & IDE_DFLAG_PRESENT)) {
- SELECT_DRIVE(drive);
- hwif->tp_ops->set_irq(hwif, 1);
+ tp_ops->dev_select(drive);
+ tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
out:
/* Exit function with master reselected (let's be sane) */
if (i)
- SELECT_DRIVE(hwif->devices[0]);
+ tp_ops->dev_select(hwif->devices[0]);
return rc;
}
int i;
ide_port_for_each_present_dev(i, drive, hwif) {
+ ide_check_nien_quirk_list(drive);
+
if (port_ops && port_ops->quirkproc)
port_ops->quirkproc(drive);
}
if (hwif->rqsize < max_sectors)
max_sectors = hwif->rqsize;
- blk_queue_max_sectors(q, max_sectors);
+ blk_queue_max_hw_sectors(q, max_sectors);
#ifdef CONFIG_PCI
/* When we have an IOMMU, we may have a problem where pci_map_sg()
max_sg_entries >>= 1;
#endif /* CONFIG_PCI */
- blk_queue_max_hw_segments(q, max_sg_entries);
- blk_queue_max_phys_segments(q, max_sg_entries);
+ blk_queue_max_segments(q, max_sg_entries);
/* assign drive queue */
drive->queue = q;
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
- kfree(drive->id);
- drive->id = NULL;
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
continue;
}
return j;
}
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ ide_host_for_each_port(i, hwif, host) {
+ if (hwif == NULL)
+ continue;
+
+ /* clear any pending IRQs */
+ hwif->tp_ops->read_status(hwif);
+
+ /* unmask IRQs */
+ if (hwif->io_ports.ctl_addr)
+ hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+ }
+}
+
/*
* This routine sets up the IRQ for an IDE interface.
*/
static int init_irq (ide_hwif_t *hwif)
{
struct ide_io_ports *io_ports = &hwif->io_ports;
- irq_handler_t irq_handler;
- int sa = 0;
+ struct ide_host *host = hwif->host;
+ irq_handler_t irq_handler = host->irq_handler;
+ int sa = host->irq_flags;
- irq_handler = hwif->host->irq_handler;
if (irq_handler == NULL)
irq_handler = ide_intr;
-#if defined(__mc68000__)
- sa = IRQF_SHARED;
-#endif /* __mc68000__ */
-
- if (hwif->chipset == ide_pci)
- sa = IRQF_SHARED;
-
- if (io_ports->ctl_addr)
- hwif->tp_ops->set_irq(hwif, 1);
-
if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
- if (!hwif->rqsize) {
- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
- (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
- hwif->rqsize = 256;
- else
- hwif->rqsize = 65536;
- }
-
#if !defined(__mc68000__)
printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
io_ports->data_addr, io_ports->status_addr,
static void drive_release_dev (struct device *dev)
{
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
- ide_hwif_t *hwif = drive->hwif;
ide_proc_unregister_device(drive);
- spin_lock_irq(&hwif->lock);
- kfree(drive->id);
- drive->id = NULL;
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
- /* Messed up locking ... */
- spin_unlock_irq(&hwif->lock);
blk_cleanup_queue(drive->queue);
- spin_lock_irq(&hwif->lock);
drive->queue = NULL;
- spin_unlock_irq(&hwif->lock);
+
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
complete(&drive->gendev_rel_comp);
}
static int hwif_init(ide_hwif_t *hwif)
{
- int old_irq;
-
if (!hwif->irq) {
- hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
- if (!hwif->irq) {
- printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name);
- return 0;
- }
+ printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name);
+ return 0;
}
if (register_blkdev(hwif->major, hwif->name))
sg_init_table(hwif->sg_table, hwif->sg_max_nents);
- if (init_irq(hwif) == 0)
- goto done;
-
- old_irq = hwif->irq;
- /*
- * It failed to initialise. Find the default IRQ for
- * this port and try that.
- */
- hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
- if (!hwif->irq) {
- printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n",
- hwif->name, old_irq);
- goto out;
- }
if (init_irq(hwif)) {
- printk(KERN_ERR "%s: probed IRQ %d and default IRQ %d failed\n",
- hwif->name, old_irq, hwif->irq);
+ printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n",
+ hwif->name, hwif->irq);
goto out;
}
- printk(KERN_WARNING "%s: probed IRQ %d failed, using default\n",
- hwif->name, hwif->irq);
-done:
blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
THIS_MODULE, ata_probe, ata_lock, hwif);
return 1;
int ret;
dev_set_name(dev, "%u.%u", hwif->index, i);
+ dev_set_drvdata(dev, drive);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
- dev->driver_data = drive;
dev->release = drive_release_dev;
ret = device_register(dev);
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
+ drive->pio_mode = XFER_PIO_0;
+
if (port_ops && port_ops->init_dev)
port_ops->init_dev(drive);
}
{
hwif->channel = port;
- if (d->chipset)
- hwif->chipset = d->chipset;
+ hwif->chipset = d->chipset ? d->chipset : ide_pci;
if (d->init_iops)
d->init_iops(hwif);
hwif->tp_ops = d->tp_ops;
/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
- if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
+ if ((hwif->host_flags & IDE_HFLAG_DTC2278) == 0 || hwif->channel == 0)
hwif->port_ops = d->port_ops;
hwif->swdma_mask = d->swdma_mask;
if (d->max_sectors)
hwif->rqsize = d->max_sectors;
+ else {
+ if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
+ (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
+ hwif->rqsize = 256;
+ else
+ hwif->rqsize = 65536;
+ }
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
ide_port_for_each_dev(i, drive, hwif) {
u8 j = (hwif->index * MAX_DRIVES) + i;
+ u16 *saved_id = drive->id;
memset(drive, 0, sizeof(*drive));
+ memset(saved_id, 0, SECTOR_SIZE);
+ drive->id = saved_id;
drive->media = ide_disk;
drive->select = (i << 4) | ATA_DEVICE_OBS;
drive->hwif = hwif;
drive->ready_stat = ATA_DRDY;
drive->bad_wstat = BAD_W_STAT;
- drive->special.b.recalibrate = 1;
- drive->special.b.set_geometry = 1;
+ drive->special_flags = IDE_SFLAG_RECALIBRATE |
+ IDE_SFLAG_SET_GEOMETRY;
drive->name[0] = 'h';
drive->name[1] = 'd';
drive->name[2] = 'a' + j;
ide_port_init_devices_data(hwif);
}
-static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
+static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
{
memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
hwif->irq = hw->irq;
- hwif->chipset = hw->chipset;
hwif->dev = hw->dev;
hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
- hwif->ack_intr = hw->ack_intr;
hwif->config_data = hw->config;
}
{
int idx = -ENOENT;
u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1;
- u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;;
+ u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;
/*
* Claim an unassigned slot.
ide_drive_t *drive;
int i;
- ide_port_for_each_dev(i, drive, hwif)
+ ide_port_for_each_dev(i, drive, hwif) {
+ kfree(drive->id);
kfree(drive);
+ }
}
static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
if (drive == NULL)
goto out_nomem;
+ /*
+ * In order to keep things simple we have an id
+ * block for all drives at all times. If the device
+ * is pre ATA or refuses ATA/ATAPI identify we
+ * will add faked data to this.
+ *
+ * Also note that 0 everywhere means "can't do X"
+ */
+ drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+ if (drive->id == NULL)
+ goto out_nomem;
+
hwif->devices[i] = drive;
}
return 0;
return -ENOMEM;
}
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d,
+ struct ide_hw **hws, unsigned int n_ports)
{
struct ide_host *host;
struct device *dev = hws[0] ? hws[0]->dev : NULL;
if (host == NULL)
return NULL;
- for (i = 0; i < MAX_HOST_PORTS; i++) {
+ for (i = 0; i < n_ports; i++) {
ide_hwif_t *hwif;
int idx;
if (idx < 0) {
printk(KERN_ERR "%s: no free slot for interface\n",
d ? d->name : "ide");
+ ide_port_free_devices(hwif);
kfree(hwif);
continue;
}
if (d) {
host->init_chipset = d->init_chipset;
+ host->get_lock = d->get_lock;
+ host->release_lock = d->release_lock;
host->host_flags = d->host_flags;
+ host->irq_flags = d->irq_flags;
}
return host;
}
int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
- hw_regs_t **hws)
+ struct ide_hw **hws)
{
ide_hwif_t *hwif, *mate = NULL;
int i, j = 0;
ide_init_port_hw(hwif, hws[i]);
ide_port_apply_params(hwif);
- if (d == NULL) {
- mate = NULL;
- } else {
- if ((i & 1) && mate) {
- hwif->mate = mate;
- mate->mate = hwif;
- }
+ if ((i & 1) && mate) {
+ hwif->mate = mate;
+ mate->mate = hwif;
+ }
- mate = (i & 1) ? NULL : hwif;
+ mate = (i & 1) ? NULL : hwif;
- ide_init_port(hwif, i & 1, d);
- ide_port_cable_detect(hwif);
- }
+ ide_init_port(hwif, i & 1, d);
+ ide_port_cable_detect(hwif);
+
+ hwif->port_flags |= IDE_PFLAG_PROBING;
ide_port_init_devices(hwif);
}
if (ide_probe_port(hwif) == 0)
hwif->present = 1;
- if (hwif->chipset != ide_4drives || !hwif->mate ||
- !hwif->mate->present) {
+ hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
+ if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 ||
+ hwif->mate == NULL || hwif->mate->present == 0) {
if (ide_register_port(hwif)) {
ide_disable_port(hwif);
continue;
ide_port_tune_devices(hwif);
}
+ ide_host_enable_irqs(host);
+
ide_host_for_each_port(i, hwif, host) {
if (hwif == NULL)
continue;
}
EXPORT_SYMBOL_GPL(ide_host_register);
-int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
- struct ide_host **hostp)
+int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws,
+ unsigned int n_ports, struct ide_host **hostp)
{
struct ide_host *host;
int rc;
- host = ide_host_alloc(d, hws);
+ host = ide_host_alloc(d, hws, n_ports);
if (host == NULL)
return -ENOMEM;
void ide_port_scan(ide_hwif_t *hwif)
{
+ int rc;
+
ide_port_apply_params(hwif);
ide_port_cable_detect(hwif);
+
+ hwif->port_flags |= IDE_PFLAG_PROBING;
+
ide_port_init_devices(hwif);
- if (ide_probe_port(hwif) < 0)
+ rc = ide_probe_port(hwif);
+
+ hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
+ if (rc < 0)
return;
hwif->present = 1;