return s;
}
-
EXPORT_SYMBOL(ide_xfer_verbose);
/**
* This is used by most chipset support modules when "auto-tuning".
*/
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
+u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
u16 *id = drive->id;
int pio_mode = -1, overridden = 0;
return pio_mode;
}
-
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
/* req_pio == "255" for auto-tune */
(void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
}
-
EXPORT_SYMBOL_GPL(ide_set_pio);
/**
* Enable or disable bounce buffering for the device. Drives move
* between PIO and DMA and that changes the rules we need.
*/
-
+
void ide_toggle_bounce(ide_drive_t *drive, int on)
{
u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */
return ide_config_drive_speed(drive, mode);
}
}
-
EXPORT_SYMBOL_GPL(ide_set_dma_mode);
/**
* ide_set_xfer_rate - set transfer rate
* @drive: drive to set
* @rate: speed to attempt to set
- *
+ *
* General helper for setting the speed of an IDE device. This
* function knows about user enforced limits from the configuration
* which ->set_pio_mode/->set_dma_mode does not.
static void ide_dump_opcode(ide_drive_t *drive)
{
- struct request *rq;
+ struct request *rq = drive->hwif->hwgroup->rq;
ide_task_t *task = NULL;
- spin_lock(&ide_lock);
- rq = NULL;
- if (HWGROUP(drive))
- rq = HWGROUP(drive)->rq;
- spin_unlock(&ide_lock);
if (!rq)
return;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
task = rq->special;
- printk("ide: failed opcode was: ");
+ printk(KERN_ERR "ide: failed opcode was: ");
if (task == NULL)
printk(KERN_CONT "unknown\n");
else
drive->hwif->tp_ops->tf_read(drive, &task);
if (lba48 || (tf->device & ATA_LBA))
- printk(", LBAsect=%llu",
+ printk(KERN_CONT ", LBAsect=%llu",
(unsigned long long)ide_get_lba_addr(tf, lba48));
else
- printk(", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
- tf->device & 0xf, tf->lbal);
+ printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
+ tf->device & 0xf, tf->lbal);
}
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- printk("{ ");
- if (err & ATA_ABORTED) printk("DriveStatusError ");
+ printk(KERN_ERR "{ ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
- printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
- if (err & ATA_UNC) printk("UncorrectableError ");
- if (err & ATA_IDNF) printk("SectorIdNotFound ");
- if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
- if (err & ATA_AMNF) printk("AddrMarkNotFound ");
- printk("}");
+ printk(KERN_CONT "%s",
+ (err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
+ if (err & ATA_UNC)
+ printk(KERN_CONT "UncorrectableError ");
+ if (err & ATA_IDNF)
+ printk(KERN_CONT "SectorIdNotFound ");
+ if (err & ATA_TRK0NF)
+ printk(KERN_CONT "TrackZeroNotFound ");
+ if (err & ATA_AMNF)
+ printk(KERN_CONT "AddrMarkNotFound ");
+ printk(KERN_CONT "}");
if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
(err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
ide_dump_sector(drive);
if (HWGROUP(drive) && HWGROUP(drive)->rq)
- printk(", sector=%llu",
+ printk(KERN_CONT ", sector=%llu",
(unsigned long long)HWGROUP(drive)->rq->sector);
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
- printk("{ ");
- if (err & ATAPI_ILI) printk("IllegalLengthIndication ");
- if (err & ATAPI_EOM) printk("EndOfMedia ");
- if (err & ATA_ABORTED) printk("AbortedCommand ");
- if (err & ATA_MCR) printk("MediaChangeRequested ");
- if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ",
- (err & ATAPI_LFS) >> 4);
- printk("}\n");
+ printk(KERN_ERR "{ ");
+ if (err & ATAPI_ILI)
+ printk(KERN_CONT "IllegalLengthIndication ");
+ if (err & ATAPI_EOM)
+ printk(KERN_CONT "EndOfMedia ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "AbortedCommand ");
+ if (err & ATA_MCR)
+ printk(KERN_CONT "MediaChangeRequested ");
+ if (err & ATAPI_LFS)
+ printk(KERN_CONT "LastFailedSense=0x%02x ",
+ (err & ATAPI_LFS) >> 4);
+ printk(KERN_CONT "}\n");
}
/**
u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
{
- unsigned long flags;
u8 err = 0;
- local_irq_save(flags);
- printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
+ printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
if (stat & ATA_BUSY)
- printk("Busy ");
+ printk(KERN_CONT "Busy ");
else {
- if (stat & ATA_DRDY) printk("DriveReady ");
- if (stat & ATA_DF) printk("DeviceFault ");
- if (stat & ATA_DSC) printk("SeekComplete ");
- if (stat & ATA_DRQ) printk("DataRequest ");
- if (stat & ATA_CORR) printk("CorrectedError ");
- if (stat & ATA_IDX) printk("Index ");
- if (stat & ATA_ERR) printk("Error ");
+ if (stat & ATA_DRDY)
+ printk(KERN_CONT "DriveReady ");
+ if (stat & ATA_DF)
+ printk(KERN_CONT "DeviceFault ");
+ if (stat & ATA_DSC)
+ printk(KERN_CONT "SeekComplete ");
+ if (stat & ATA_DRQ)
+ printk(KERN_CONT "DataRequest ");
+ if (stat & ATA_CORR)
+ printk(KERN_CONT "CorrectedError ");
+ if (stat & ATA_IDX)
+ printk(KERN_CONT "Index ");
+ if (stat & ATA_ERR)
+ printk(KERN_CONT "Error ");
}
- printk("}\n");
+ printk(KERN_CONT "}\n");
if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
err = ide_read_error(drive);
- printk("%s: %s: error=0x%02x ", drive->name, msg, err);
+ printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
ide_dump_ata_error(drive, err);
else
ide_dump_atapi_error(drive, err);
}
ide_dump_opcode(drive);
- local_irq_restore(flags);
return err;
}
-
EXPORT_SYMBOL(ide_dump_status);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff