#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/bitops.h>
#include <linux/nmi.h>
outb(val, port);
}
-static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
-{
- outb(addr, port);
-}
-
-void default_hwif_iops (ide_hwif_t *hwif)
-{
- hwif->OUTB = ide_outb;
- hwif->OUTBSYNC = ide_outbsync;
- hwif->INB = ide_inb;
-}
-
/*
* MMIO operations, typically used for SATA controllers
*/
writeb(value, (void __iomem *) port);
}
-static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
-{
- writeb(value, (void __iomem *) port);
-}
-
-void default_hwif_mmiops (ide_hwif_t *hwif)
-{
- hwif->OUTB = ide_mm_outb;
- /* Most systems will need to override OUTBSYNC, alas however
- this one is controller specific! */
- hwif->OUTBSYNC = ide_mm_outbsync;
- hwif->INB = ide_mm_inb;
-}
-
-EXPORT_SYMBOL(default_hwif_mmiops);
-
void SELECT_DRIVE (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
+ ide_task_t task;
if (port_ops && port_ops->selectproc)
port_ops->selectproc(drive);
- hwif->OUTB(drive->select.all, hwif->io_ports.device_addr);
+ memset(&task, 0, sizeof(task));
+ task.tf_flags = IDE_TFLAG_OUT_DEVICE;
+
+ drive->hwif->tp_ops->tf_load(drive, &task);
}
void SELECT_MASK(ide_drive_t *drive, int mask)
port_ops->maskproc(drive, mask);
}
-static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
+ else
+ outb(cmd, hwif->io_ports.command_addr);
+}
+EXPORT_SYMBOL_GPL(ide_exec_command);
+
+u8 ide_read_status(ide_hwif_t *hwif)
+{
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ return readb((void __iomem *)hwif->io_ports.status_addr);
+ else
+ return inb(hwif->io_ports.status_addr);
+}
+EXPORT_SYMBOL_GPL(ide_read_status);
+
+u8 ide_read_altstatus(ide_hwif_t *hwif)
+{
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ return readb((void __iomem *)hwif->io_ports.ctl_addr);
+ else
+ return inb(hwif->io_ports.ctl_addr);
+}
+EXPORT_SYMBOL_GPL(ide_read_altstatus);
+
+u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
+{
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ return readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ return inb(hwif->dma_base + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ide_read_sff_dma_status);
+
+void ide_set_irq(ide_hwif_t *hwif, int on)
+{
+ u8 ctl = ATA_DEVCTL_OBS;
+
+ if (on == 4) { /* hack for SRST */
+ ctl |= 4;
+ on &= ~4;
+ }
+
+ ctl |= on ? 0 : 2;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+ else
+ outb(ctl, hwif->io_ports.ctl_addr);
+}
+EXPORT_SYMBOL_GPL(ide_set_irq);
+
+void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
tf_outb(tf->lbah, io_ports->lbah_addr);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tf_outb((tf->device & HIHI) | drive->select.all,
+ tf_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
+EXPORT_SYMBOL_GPL(ide_tf_load);
-static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
/* be sure we're looking at the low order bits */
tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+ tf->feature = tf_inb(io_ports->feature_addr);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
tf->nsect = tf_inb(io_ports->nsect_addr);
if (task->tf_flags & IDE_TFLAG_IN_LBAL)
tf->hob_lbah = tf_inb(io_ports->lbah_addr);
}
}
+EXPORT_SYMBOL_GPL(ide_tf_read);
/*
* Some localbus EIDE interfaces require a special access sequence
* so if an odd len is specified, be sure that there's at least one
* extra byte allocated for the buffer.
*/
-static void ata_input_data(ide_drive_t *drive, struct request *rq,
- void *buf, unsigned int len)
+void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf,
+ unsigned int len)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
insw(data_addr, buf, len / 2);
}
}
+EXPORT_SYMBOL_GPL(ide_input_data);
/*
* This is used for most PIO data transfers *to* the IDE interface
*/
-static void ata_output_data(ide_drive_t *drive, struct request *rq,
- void *buf, unsigned int len)
+void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf,
+ unsigned int len)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
outsw(data_addr, buf, len / 2);
}
}
+EXPORT_SYMBOL_GPL(ide_output_data);
-void default_hwif_transport(ide_hwif_t *hwif)
+u8 ide_read_error(ide_drive_t *drive)
{
- hwif->tf_load = ide_tf_load;
- hwif->tf_read = ide_tf_read;
+ ide_task_t task;
- hwif->input_data = ata_input_data;
- hwif->output_data = ata_output_data;
+ memset(&task, 0, sizeof(task));
+ task.tf_flags = IDE_TFLAG_IN_FEATURE;
+
+ drive->hwif->tp_ops->tf_read(drive, &task);
+
+ return task.tf.error;
}
+EXPORT_SYMBOL_GPL(ide_read_error);
-void ide_fix_driveid (struct hd_driveid *id)
+void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
+{
+ ide_task_t task;
+
+ memset(&task, 0, sizeof(task));
+ task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM |
+ IDE_TFLAG_IN_NSECT;
+
+ drive->hwif->tp_ops->tf_read(drive, &task);
+
+ *bcount = (task.tf.lbah << 8) | task.tf.lbam;
+ *ireason = task.tf.nsect & 3;
+}
+EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
+
+const struct ide_tp_ops default_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .read_sff_dma_status = ide_read_sff_dma_status,
+
+ .set_irq = ide_set_irq,
+
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
+};
+
+void ide_fix_driveid(u16 *id)
{
#ifndef __LITTLE_ENDIAN
# ifdef __BIG_ENDIAN
int i;
- u16 *stringcast;
-
- id->config = __le16_to_cpu(id->config);
- id->cyls = __le16_to_cpu(id->cyls);
- id->reserved2 = __le16_to_cpu(id->reserved2);
- id->heads = __le16_to_cpu(id->heads);
- id->track_bytes = __le16_to_cpu(id->track_bytes);
- id->sector_bytes = __le16_to_cpu(id->sector_bytes);
- id->sectors = __le16_to_cpu(id->sectors);
- id->vendor0 = __le16_to_cpu(id->vendor0);
- id->vendor1 = __le16_to_cpu(id->vendor1);
- id->vendor2 = __le16_to_cpu(id->vendor2);
- stringcast = (u16 *)&id->serial_no[0];
- for (i = 0; i < (20/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- id->buf_type = __le16_to_cpu(id->buf_type);
- id->buf_size = __le16_to_cpu(id->buf_size);
- id->ecc_bytes = __le16_to_cpu(id->ecc_bytes);
- stringcast = (u16 *)&id->fw_rev[0];
- for (i = 0; i < (8/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- stringcast = (u16 *)&id->model[0];
- for (i = 0; i < (40/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- id->dword_io = __le16_to_cpu(id->dword_io);
- id->reserved50 = __le16_to_cpu(id->reserved50);
- id->field_valid = __le16_to_cpu(id->field_valid);
- id->cur_cyls = __le16_to_cpu(id->cur_cyls);
- id->cur_heads = __le16_to_cpu(id->cur_heads);
- id->cur_sectors = __le16_to_cpu(id->cur_sectors);
- id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0);
- id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1);
- id->lba_capacity = __le32_to_cpu(id->lba_capacity);
- id->dma_1word = __le16_to_cpu(id->dma_1word);
- id->dma_mword = __le16_to_cpu(id->dma_mword);
- id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes);
- id->eide_dma_min = __le16_to_cpu(id->eide_dma_min);
- id->eide_dma_time = __le16_to_cpu(id->eide_dma_time);
- id->eide_pio = __le16_to_cpu(id->eide_pio);
- id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy);
- for (i = 0; i < 2; ++i)
- id->words69_70[i] = __le16_to_cpu(id->words69_70[i]);
- for (i = 0; i < 4; ++i)
- id->words71_74[i] = __le16_to_cpu(id->words71_74[i]);
- id->queue_depth = __le16_to_cpu(id->queue_depth);
- for (i = 0; i < 4; ++i)
- id->words76_79[i] = __le16_to_cpu(id->words76_79[i]);
- id->major_rev_num = __le16_to_cpu(id->major_rev_num);
- id->minor_rev_num = __le16_to_cpu(id->minor_rev_num);
- id->command_set_1 = __le16_to_cpu(id->command_set_1);
- id->command_set_2 = __le16_to_cpu(id->command_set_2);
- id->cfsse = __le16_to_cpu(id->cfsse);
- id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1);
- id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2);
- id->csf_default = __le16_to_cpu(id->csf_default);
- id->dma_ultra = __le16_to_cpu(id->dma_ultra);
- id->trseuc = __le16_to_cpu(id->trseuc);
- id->trsEuc = __le16_to_cpu(id->trsEuc);
- id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues);
- id->mprc = __le16_to_cpu(id->mprc);
- id->hw_config = __le16_to_cpu(id->hw_config);
- id->acoustic = __le16_to_cpu(id->acoustic);
- id->msrqs = __le16_to_cpu(id->msrqs);
- id->sxfert = __le16_to_cpu(id->sxfert);
- id->sal = __le16_to_cpu(id->sal);
- id->spg = __le32_to_cpu(id->spg);
- id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2);
- for (i = 0; i < 22; i++)
- id->words104_125[i] = __le16_to_cpu(id->words104_125[i]);
- id->last_lun = __le16_to_cpu(id->last_lun);
- id->word127 = __le16_to_cpu(id->word127);
- id->dlf = __le16_to_cpu(id->dlf);
- id->csfo = __le16_to_cpu(id->csfo);
- for (i = 0; i < 26; i++)
- id->words130_155[i] = __le16_to_cpu(id->words130_155[i]);
- id->word156 = __le16_to_cpu(id->word156);
- for (i = 0; i < 3; i++)
- id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
- id->cfa_power = __le16_to_cpu(id->cfa_power);
- for (i = 0; i < 14; i++)
- id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
- for (i = 0; i < 31; i++)
- id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
- for (i = 0; i < 48; i++)
- id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
- id->integrity_word = __le16_to_cpu(id->integrity_word);
+
+ for (i = 0; i < 256; i++)
+ id[i] = __le16_to_cpu(id[i]);
# else
# error "Please fix <asm/byteorder.h>"
# endif
* ide_fixstring() cleans up and (optionally) byte-swaps a text string,
* removing leading/trailing blanks and compressing internal blanks.
* It is primarily used to tidy up the model name/number fields as
- * returned by the WIN_[P]IDENTIFY commands.
+ * returned by the ATA_CMD_ID_ATA[PI] commands.
*/
void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
{
- u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */
+ u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */
if (byteswap) {
/* convert from big-endian to host byte order */
- for (p = end ; p != s;) {
- unsigned short *pp = (unsigned short *) (p -= 2);
- *pp = ntohs(*pp);
- }
+ for (p = s ; p != end ; p += 2)
+ be16_to_cpus((u16 *) p);
}
+
/* strip leading blanks */
+ p = s;
while (s != end && *s == ' ')
++s;
/* compress internal blanks and strip trailing blanks */
* about possible isa-pnp and pci-pnp issues yet.
*/
if (hwif->io_ports.ctl_addr)
- stat = ide_read_altstatus(drive);
+ stat = hwif->tp_ops->read_altstatus(hwif);
else
/* Note: this may clear a pending IRQ!! */
- stat = ide_read_status(drive);
+ stat = hwif->tp_ops->read_status(hwif);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
/* drive busy: definitely not interrupting */
return 0;
*/
static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
unsigned long flags;
int i;
u8 stat;
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
- stat = ide_read_status(drive);
+ stat = tp_ops->read_status(hwif);
- if (stat & BUSY_STAT) {
+ if (stat & ATA_BUSY) {
local_irq_set(flags);
timeout += jiffies;
- while ((stat = ide_read_status(drive)) & BUSY_STAT) {
+ while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
if (time_after(jiffies, timeout)) {
/*
* One last read after the timeout in case
* heavy interrupt load made us not make any
* progress during the timeout..
*/
- stat = ide_read_status(drive);
- if (!(stat & BUSY_STAT))
+ stat = tp_ops->read_status(hwif);
+ if ((stat & ATA_BUSY) == 0)
break;
local_irq_restore(flags);
*/
for (i = 0; i < 10; i++) {
udelay(1);
- stat = ide_read_status(drive);
+ stat = tp_ops->read_status(hwif);
if (OK_STAT(stat, good, bad)) {
*rstat = stat;
/**
* ide_in_drive_list - look for drive in black/white list
* @id: drive identifier
- * @drive_table: list to inspect
+ * @table: list to inspect
*
* Look for a drive in the blacklist and the whitelist tables
* Returns 1 if the drive is found in the table.
*/
-int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
+int ide_in_drive_list(u16 *id, const struct drive_list_entry *table)
{
- for ( ; drive_table->id_model; drive_table++)
- if ((!strcmp(drive_table->id_model, id->model)) &&
- (!drive_table->id_firmware ||
- strstr(id->fw_rev, drive_table->id_firmware)))
+ for ( ; table->id_model; table++)
+ if ((!strcmp(table->id_model, (char *)&id[ATA_ID_PROD])) &&
+ (!table->id_firmware ||
+ strstr((char *)&id[ATA_ID_FW_REV], table->id_firmware)))
return 1;
return 0;
}
u8 eighty_ninty_three (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
int ivb = ide_in_drive_list(id, ivb_list);
if (hwif->cbl == ATA_CBL_PATA40_SHORT)
printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
drive->name);
- if (ide_dev_is_sata(id) && !ivb)
+ if (ata_id_is_sata(id) && !ivb)
return 1;
if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
- if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
+ if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
+ (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
return 1;
no_80w:
- if (drive->udma33_warned == 1)
+ if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
drive->name,
hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
- drive->udma33_warned = 1;
+ drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED;
return 0;
}
int ide_driveid_update(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id;
- unsigned long timeout, flags;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ u16 *id;
+ unsigned long flags;
u8 stat;
/*
*/
SELECT_MASK(drive, 1);
- ide_set_irq(drive, 0);
+ tp_ops->set_irq(hwif, 0);
msleep(50);
- hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr);
- timeout = jiffies + WAIT_WORSTCASE;
- do {
- if (time_after(jiffies, timeout)) {
- SELECT_MASK(drive, 0);
- return 0; /* drive timed-out */
- }
+ tp_ops->exec_command(hwif, ATA_CMD_ID_ATA);
- msleep(50); /* give drive a breather */
- stat = ide_read_altstatus(drive);
- } while (stat & BUSY_STAT);
+ if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) {
+ SELECT_MASK(drive, 0);
+ return 0;
+ }
- msleep(50); /* wait for IRQ and DRQ_STAT */
- stat = ide_read_status(drive);
+ msleep(50); /* wait for IRQ and ATA_DRQ */
+ stat = tp_ops->read_status(hwif);
- if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
+ if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) {
SELECT_MASK(drive, 0);
printk("%s: CHECK for good STATUS\n", drive->name);
return 0;
}
local_irq_save(flags);
SELECT_MASK(drive, 0);
- id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
+ id = kmalloc(SECTOR_SIZE, GFP_ATOMIC);
if (!id) {
local_irq_restore(flags);
return 0;
}
- hwif->input_data(drive, NULL, id, SECTOR_SIZE);
- (void)ide_read_status(drive); /* clear drive IRQ */
+ tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
+ (void)tp_ops->read_status(hwif); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
ide_fix_driveid(id);
- if (id) {
- drive->id->dma_ultra = id->dma_ultra;
- drive->id->dma_mword = id->dma_mword;
- drive->id->dma_1word = id->dma_1word;
- /* anything more ? */
- kfree(id);
-
- if (drive->using_dma && ide_id_dma_bug(drive))
- ide_dma_off(drive);
- }
+
+ drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES];
+ drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES];
+ drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES];
+ /* anything more ? */
+
+ kfree(id);
+
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
+ ide_dma_off(drive);
return 1;
}
int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ u16 *id = drive->id, i;
int error = 0;
u8 stat;
+ ide_task_t task;
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_ops) /* check if host supports DMA */
#endif
/* Skip setting PIO flow-control modes on pre-EIDE drives */
- if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08))
+ if ((speed & 0xf8) == XFER_PIO_0 && ata_id_has_iordy(drive->id) == 0)
goto skip;
/*
udelay(1);
SELECT_DRIVE(drive);
- SELECT_MASK(drive, 0);
+ SELECT_MASK(drive, 1);
udelay(1);
- ide_set_irq(drive, 0);
- hwif->OUTB(speed, io_ports->nsect_addr);
- hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
- hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr);
+ tp_ops->set_irq(hwif, 0);
+
+ memset(&task, 0, sizeof(task));
+ task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT;
+ task.tf.feature = SETFEATURES_XFER;
+ task.tf.nsect = speed;
+
+ tp_ops->tf_load(drive, &task);
+
+ tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
+
if (drive->quirk_list == 2)
- ide_set_irq(drive, 1);
+ tp_ops->set_irq(hwif, 1);
error = __ide_wait_stat(drive, drive->ready_stat,
- BUSY_STAT|DRQ_STAT|ERR_STAT,
+ ATA_BUSY | ATA_DRQ | ATA_ERR,
WAIT_CMD, &stat);
SELECT_MASK(drive, 0);
return error;
}
- drive->id->dma_ultra &= ~0xFF00;
- drive->id->dma_mword &= ~0x0F00;
- drive->id->dma_1word &= ~0x0F00;
+ id[ATA_ID_UDMA_MODES] &= ~0xFF00;
+ id[ATA_ID_MWDMA_MODES] &= ~0x0F00;
+ id[ATA_ID_SWDMA_MODES] &= ~0x0F00;
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) &&
- drive->using_dma)
+ if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
#endif
- switch(speed) {
- case XFER_UDMA_7: drive->id->dma_ultra |= 0x8080; break;
- case XFER_UDMA_6: drive->id->dma_ultra |= 0x4040; break;
- case XFER_UDMA_5: drive->id->dma_ultra |= 0x2020; break;
- case XFER_UDMA_4: drive->id->dma_ultra |= 0x1010; break;
- case XFER_UDMA_3: drive->id->dma_ultra |= 0x0808; break;
- case XFER_UDMA_2: drive->id->dma_ultra |= 0x0404; break;
- case XFER_UDMA_1: drive->id->dma_ultra |= 0x0202; break;
- case XFER_UDMA_0: drive->id->dma_ultra |= 0x0101; break;
- case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break;
- case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break;
- case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break;
- case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break;
- case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break;
- case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break;
- default: break;
+ if (speed >= XFER_UDMA_0) {
+ i = 1 << (speed - XFER_UDMA_0);
+ id[ATA_ID_UDMA_MODES] |= (i << 8 | i);
+ } else if (speed >= XFER_MW_DMA_0) {
+ i = 1 << (speed - XFER_MW_DMA_0);
+ id[ATA_ID_MWDMA_MODES] |= (i << 8 | i);
+ } else if (speed >= XFER_SW_DMA_0) {
+ i = 1 << (speed - XFER_SW_DMA_0);
+ id[ATA_ID_SWDMA_MODES] |= (i << 8 | i);
}
+
if (!drive->init_speed)
drive->init_speed = speed;
drive->current_speed = speed;
spin_lock_irqsave(&ide_lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
+ hwif->tp_ops->exec_command(hwif, cmd);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);
+static inline void ide_complete_drive_reset(ide_drive_t *drive, int err)
+{
+ struct request *rq = drive->hwif->hwgroup->rq;
+
+ if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET)
+ ide_end_request(drive, err ? err : 1, 0);
+}
+
/* needed below */
static ide_startstop_t do_reset1 (ide_drive_t *, int);
*/
static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
{
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
u8 stat;
SELECT_DRIVE(drive);
udelay (10);
- stat = ide_read_status(drive);
+ stat = hwif->tp_ops->read_status(hwif);
- if (OK_STAT(stat, 0, BUSY_STAT))
+ if (OK_STAT(stat, 0, ATA_BUSY))
printk("%s: ATAPI reset complete\n", drive->name);
else {
if (time_before(jiffies, hwgroup->poll_timeout)) {
}
/* done polling */
hwgroup->polling = 0;
- hwgroup->resetting = 0;
+ ide_complete_drive_reset(drive, 0);
return ide_stopped;
}
+static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
+{
+ static const char *err_master_vals[] =
+ { NULL, "passed", "formatter device error",
+ "sector buffer error", "ECC circuitry error",
+ "controlling MPU error" };
+
+ u8 err_master = err & 0x7f;
+
+ printk(KERN_ERR "%s: reset: master: ", hwif->name);
+ if (err_master && err_master < 6)
+ printk(KERN_CONT "%s", err_master_vals[err_master]);
+ else
+ printk(KERN_CONT "error (0x%02x?)", err);
+ if (err & 0x80)
+ printk(KERN_CONT "; slave: failed");
+ printk(KERN_CONT "\n");
+}
+
/*
* reset_pollfunc() gets invoked to poll the interface for completion every 50ms
* during an ide reset operation. If the drives have not yet responded,
ide_hwif_t *hwif = HWIF(drive);
const struct ide_port_ops *port_ops = hwif->port_ops;
u8 tmp;
+ int err = 0;
if (port_ops && port_ops->reset_poll) {
- if (port_ops->reset_poll(drive)) {
+ err = port_ops->reset_poll(drive);
+ if (err) {
printk(KERN_ERR "%s: host reset_poll failure for %s.\n",
hwif->name, drive->name);
- return ide_stopped;
+ goto out;
}
}
- tmp = ide_read_status(drive);
+ tmp = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(tmp, 0, BUSY_STAT)) {
+ if (!OK_STAT(tmp, 0, ATA_BUSY)) {
if (time_before(jiffies, hwgroup->poll_timeout)) {
ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
/* continue polling */
}
printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp);
drive->failures++;
+ err = -EIO;
} else {
- printk("%s: reset: ", hwif->name);
tmp = ide_read_error(drive);
if (tmp == 1) {
- printk("success\n");
+ printk(KERN_INFO "%s: reset: success\n", hwif->name);
drive->failures = 0;
} else {
+ ide_reset_report_error(hwif, tmp);
drive->failures++;
- printk("master: ");
- switch (tmp & 0x7f) {
- case 1: printk("passed");
- break;
- case 2: printk("formatter device error");
- break;
- case 3: printk("sector buffer error");
- break;
- case 4: printk("ECC circuitry error");
- break;
- case 5: printk("controlling MPU error");
- break;
- default:printk("error (0x%02x?)", tmp);
- }
- if (tmp & 0x80)
- printk("; slave: failed");
- printk("\n");
+ err = -EIO;
}
}
+out:
hwgroup->polling = 0; /* done polling */
- hwgroup->resetting = 0; /* done reset attempt */
+ ide_complete_drive_reset(drive, err);
return ide_stopped;
}
static void ide_disk_pre_reset(ide_drive_t *drive)
{
- int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
+ int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
drive->special.all = 0;
drive->special.b.set_geometry = legacy;
drive->special.b.recalibrate = legacy;
+
drive->mult_count = 0;
- if (!drive->keep_settings && !drive->using_dma)
+ drive->dev_flags &= ~IDE_DFLAG_PARKED;
+
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
drive->mult_req = 0;
+
if (drive->mult_req != drive->mult_count)
drive->special.b.set_multmode = 1;
}
if (drive->media == ide_disk)
ide_disk_pre_reset(drive);
else
- drive->post_reset = 1;
+ drive->dev_flags |= IDE_DFLAG_POST_RESET;
- if (drive->using_dma) {
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
- if (!drive->keep_settings) {
- if (!drive->using_dma) {
- drive->unmask = 0;
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
return;
static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
{
unsigned int unit;
- unsigned long flags;
+ unsigned long flags, timeout;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
+ const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
- u8 ctl;
+ DEFINE_WAIT(wait);
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
io_ports = &hwif->io_ports;
+ tp_ops = hwif->tp_ops;
+
/* We must not reset with running handlers */
BUG_ON(hwgroup->handler != NULL);
/* For an ATAPI device, first try an ATAPI SRST. */
if (drive->media != ide_disk && !do_not_try_atapi) {
- hwgroup->resetting = 1;
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
+ tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
return ide_started;
}
+ /* We must not disturb devices in the IDE_DFLAG_PARKED state. */
+ do {
+ unsigned long now;
+
+ prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
+ timeout = jiffies;
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *tdrive = &hwif->drives[unit];
+
+ if (tdrive->dev_flags & IDE_DFLAG_PRESENT &&
+ tdrive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(tdrive->sleep, timeout))
+ timeout = tdrive->sleep;
+ }
+
+ now = jiffies;
+ if (time_before_eq(timeout, now))
+ break;
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+ timeout = schedule_timeout_uninterruptible(timeout - now);
+ spin_lock_irqsave(&ide_lock, flags);
+ } while (timeout);
+ finish_wait(&ide_park_wq, &wait);
+
/*
* First, reset any device state data we were maintaining
* for any of the drives on this interface.
if (io_ports->ctl_addr == 0) {
spin_unlock_irqrestore(&ide_lock, flags);
+ ide_complete_drive_reset(drive, -ENXIO);
return ide_stopped;
}
- hwgroup->resetting = 1;
/*
* Note that we also set nIEN while resetting the device,
* to mask unwanted interrupts from the interface during the reset.
* immediate interrupt due to the edge transition it produces.
* This single interrupt gives us a "fast poll" for drives that
* recover from reset very quickly, saving us the first 50ms wait time.
+ *
+ * TODO: add ->softreset method and stop abusing ->set_irq
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
+ tp_ops->set_irq(hwif, 4);
/* more than enough time */
udelay(10);
- if (drive->quirk_list == 2)
- ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */
- else
- ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
+ /* clear SRST, leave nIEN (unless device is on the quirk list) */
+ tp_ops->set_irq(hwif, drive->quirk_list == 2);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
* about locking issues (2.5 work ?).
*/
mdelay(1);
- stat = hwif->INB(hwif->io_ports.status_addr);
- if ((stat & BUSY_STAT) == 0)
+ stat = hwif->tp_ops->read_status(hwif);
+ if ((stat & ATA_BUSY) == 0)
return 0;
/*
* Assume a value of 0xff means nothing is connected to
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff