}
if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
- drive->special.b.recalibrate = 1;
+ drive->special_flags |= IDE_SFLAG_RECALIBRATE;
++rq->errors;
/* retry only "normal" I/O: */
if (!blk_fs_request(rq)) {
- rq->errors = 1;
- ide_end_drive_cmd(drive, stat, err);
+ if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+ struct ide_cmd *cmd = rq->special;
+
+ if (cmd)
+ ide_complete_cmd(drive, cmd, stat, err);
+ } else if (blk_pm_request(rq)) {
+ rq->errors = 1;
+ ide_complete_pm_rq(drive, rq);
+ return ide_stopped;
+ }
+ rq->errors = err;
+ ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq));
return ide_stopped;
}
{
struct request *rq = drive->hwif->rq;
- if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET)
- ide_end_request(drive, err ? err : 1, 0);
+ if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
+ if (err <= 0 && rq->errors == 0)
+ rq->errors = -EIO;
+ ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+ }
}
/* needed below */
static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u8 stat;
- SELECT_DRIVE(drive);
+ tp_ops->dev_select(drive);
udelay(10);
- stat = hwif->tp_ops->read_status(hwif);
+ stat = tp_ops->read_status(hwif);
if (OK_STAT(stat, 0, ATA_BUSY))
printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name);
else {
if (time_before(jiffies, hwif->poll_timeout)) {
- ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20,
- NULL);
+ ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
/* continue polling */
return ide_started;
}
if (!OK_STAT(tmp, 0, ATA_BUSY)) {
if (time_before(jiffies, hwif->poll_timeout)) {
- ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
+ ide_set_handler(drive, &reset_pollfunc, HZ/20);
/* continue polling */
return ide_started;
}
{
int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
- drive->special.all = 0;
- drive->special.b.set_geometry = legacy;
- drive->special.b.recalibrate = legacy;
+ drive->special_flags =
+ legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0;
drive->mult_count = 0;
drive->dev_flags &= ~IDE_DFLAG_PARKED;
drive->mult_req = 0;
if (drive->mult_req != drive->mult_count)
- drive->special.b.set_multmode = 1;
+ drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
}
static void pre_reset(ide_drive_t *drive)
/* For an ATAPI device, first try an ATAPI SRST. */
if (drive->media != ide_disk && !do_not_try_atapi) {
pre_reset(drive);
- SELECT_DRIVE(drive);
+ tp_ops->dev_select(drive);
udelay(20);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
ndelay(400);
hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
hwif->polling = 1;
- __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
+ __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
spin_unlock_irqrestore(&hwif->lock, flags);
return ide_started;
}
* immediate interrupt due to the edge transition it produces.
* This single interrupt gives us a "fast poll" for drives that
* recover from reset very quickly, saving us the first 50ms wait time.
- *
- * TODO: add ->softreset method and stop abusing ->set_irq
*/
/* set SRST and nIEN */
- tp_ops->set_irq(hwif, 4);
+ tp_ops->write_devctl(hwif, ATA_SRST | ATA_NIEN | ATA_DEVCTL_OBS);
/* more than enough time */
udelay(10);
/* clear SRST, leave nIEN (unless device is on the quirk list) */
- tp_ops->set_irq(hwif, drive->quirk_list == 2);
+ tp_ops->write_devctl(hwif,
+ ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) |
+ ATA_DEVCTL_OBS);
/* more than enough time */
udelay(10);
hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
hwif->polling = 1;
- __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
+ __ide_set_handler(drive, &reset_pollfunc, HZ/20);
/*
* Some weird controller like resetting themselves to a strange