/*
- * linux/drivers/ide/ide_cd.h
- *
* Copyright (C) 1996-98 Erik Andersen
* Copyright (C) 1998-2000 Jens Axboe
*/
#include <linux/cdrom.h>
#include <asm/byteorder.h>
-/* Turn this on to have the driver print out the meanings of the
- ATAPI error codes. This will use up additional kernel-space
- memory, though. */
+#define IDECD_DEBUG_LOG 0
-#ifndef VERBOSE_IDE_CD_ERRORS
-#define VERBOSE_IDE_CD_ERRORS 1
-#endif
-
-
-/* Turning this on will remove code to work around various nonstandard
- ATAPI implementations. If you know your drive follows the standard,
- this will give you a slightly smaller kernel. */
-
-#ifndef STANDARD_ATAPI
-#define STANDARD_ATAPI 0
-#endif
-
-
-/* Turning this on will disable the door-locking functionality.
- This is apparently needed for supermount. */
-
-#ifndef NO_DOOR_LOCKING
-#define NO_DOOR_LOCKING 0
+#if IDECD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC (60 * HZ)
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
#define ATAPI_CAPABILITIES_PAGE_SIZE (8 + 20)
#define ATAPI_CAPABILITIES_PAGE_PAD_SIZE 4
-/* Configuration flags. These describe the capabilities of the drive.
- They generally do not change after initialization, unless we learn
- more about the drive from stuff failing. */
-struct ide_cd_config_flags {
- __u8 drq_interrupt : 1; /* Device sends an interrupt when ready
- for a packet command. */
- __u8 no_doorlock : 1; /* Drive cannot lock the door. */
- __u8 no_eject : 1; /* Drive cannot eject the disc. */
- __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */
- __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */
- __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
- __u8 limit_nframes : 1; /* Drive does not provide data in
- multiples of SECTOR_SIZE when more
- than one interrupt is needed. */
- __u8 seeking : 1; /* Seeking in progress */
- __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */
- byte max_speed; /* Max speed of the drive */
-};
-
-/* State flags. These give information about the current state of the
- drive, and will change during normal operation. */
-struct ide_cd_state_flags {
- __u8 media_changed : 1; /* Driver has noticed a media change. */
- __u8 toc_valid : 1; /* Saved TOC information is current. */
- __u8 door_locked : 1; /* We think that the drive door is locked. */
- __u8 writing : 1; /* the drive is currently writing */
- __u8 reserved : 4;
- byte current_speed; /* Current speed of the drive */
-};
-
/* Structure of a MSF cdrom address. */
struct atapi_msf {
- byte reserved;
- byte minute;
- byte second;
- byte frame;
+ u8 reserved;
+ u8 minute;
+ u8 second;
+ u8 frame;
};
/* Space to hold the disk TOC. */
#define MAX_TRACKS 99
struct atapi_toc_header {
unsigned short toc_length;
- byte first_track;
- byte last_track;
+ u8 first_track;
+ u8 last_track;
};
struct atapi_toc_entry {
- byte reserved1;
+ u8 reserved1;
#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 adr : 4;
- __u8 control : 4;
+ u8 adr : 4;
+ u8 control : 4;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 control : 4;
- __u8 adr : 4;
+ u8 control : 4;
+ u8 adr : 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
- byte track;
- byte reserved2;
+ u8 track;
+ u8 reserved2;
union {
unsigned lba;
struct atapi_msf msf;
/* Extra per-device info for cdrom drives. */
struct cdrom_info {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
+ ide_drive_t *drive;
+ struct ide_driver *driver;
+ struct gendisk *disk;
+ struct device dev;
/* Buffer for table of contents. NULL if we haven't allocated
a TOC buffer for this device yet. */
struct atapi_toc *toc;
- unsigned long sector_buffered;
- unsigned long nsectors_buffered;
- unsigned char *buffer;
-
- /* The result of the last successful request sense command
- on this device. */
- struct request_sense sense_data;
-
- struct request request_sense_request;
- int dma;
- unsigned long last_block;
- unsigned long start_seek;
-
- struct ide_cd_config_flags config_flags;
- struct ide_cd_state_flags state_flags;
+ u8 max_speed; /* Max speed of the drive. */
+ u8 current_speed; /* Current speed of the drive. */
/* Per-device info needed by cdrom.c generic driver. */
struct cdrom_device_info devinfo;
unsigned long write_timeout;
};
-/****************************************************************************
- * Descriptions of ATAPI error codes.
- */
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-
-/* ATAPI sense keys (from table 140 of ATAPI 2.6) */
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define BLANK_CHECK 0x08
-#define ABORTED_COMMAND 0x0b
-#define MISCOMPARE 0x0e
-
-
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-#if VERBOSE_IDE_CD_ERRORS
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned short packet_command;
- const char * const text;
-} packet_command_texts[] = {
- { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
- { GPCMD_REQUEST_SENSE, "Request Sense" },
- { GPCMD_FORMAT_UNIT, "Format Unit" },
- { GPCMD_INQUIRY, "Inquiry" },
- { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
- { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
- { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
- { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
- { GPCMD_READ_10, "Read 10" },
- { GPCMD_WRITE_10, "Write 10" },
- { GPCMD_SEEK, "Seek" },
- { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
- { GPCMD_VERIFY_10, "Verify 10" },
- { GPCMD_FLUSH_CACHE, "Flush Cache" },
- { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
- { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
- { GPCMD_READ_HEADER, "Read Header" },
- { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
- { GPCMD_GET_CONFIGURATION, "Get Configuration" },
- { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
- { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
- { GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" },
- { GPCMD_PAUSE_RESUME, "Pause/Resume" },
- { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
- { GPCMD_READ_DISC_INFO, "Read Disc Info" },
- { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
- { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
- { GPCMD_SEND_OPC, "Send OPC" },
- { GPCMD_MODE_SELECT_10, "Mode Select 10" },
- { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
- { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
- { GPCMD_CLOSE_TRACK, "Close Track" },
- { GPCMD_BLANK, "Blank" },
- { GPCMD_SEND_EVENT, "Send Event" },
- { GPCMD_SEND_KEY, "Send Key" },
- { GPCMD_REPORT_KEY, "Report Key" },
- { GPCMD_LOAD_UNLOAD, "Load/Unload" },
- { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
- { GPCMD_READ_12, "Read 12" },
- { GPCMD_GET_PERFORMANCE, "Get Performance" },
- { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
- { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
- { GPCMD_SET_STREAMING, "Set Streaming" },
- { GPCMD_READ_CD_MSF, "Read CD MSF" },
- { GPCMD_SCAN, "Scan" },
- { GPCMD_SET_SPEED, "Set Speed" },
- { GPCMD_PLAY_CD, "Play CD" },
- { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
- { GPCMD_READ_CD, "Read CD" },
-};
-
-
-
-/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const char * const sense_key_texts[16] = {
- "No sense data",
- "Recovered error",
- "Not ready",
- "Medium error",
- "Hardware error",
- "Illegal request",
- "Unit attention",
- "Data protect",
- "Blank check",
- "(reserved)",
- "(reserved)",
- "Aborted command",
- "(reserved)",
- "(reserved)",
- "Miscompare",
- "(reserved)",
-};
-
-/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned long asc_ascq;
- const char * const text;
-} sense_data_texts[] = {
- { 0x000000, "No additional sense information" },
- { 0x000011, "Play operation in progress" },
- { 0x000012, "Play operation paused" },
- { 0x000013, "Play operation successfully completed" },
- { 0x000014, "Play operation stopped due to error" },
- { 0x000015, "No current audio status to return" },
- { 0x010c0a, "Write error - padding blocks added" },
- { 0x011700, "Recovered data with no error correction applied" },
- { 0x011701, "Recovered data with retries" },
- { 0x011702, "Recovered data with positive head offset" },
- { 0x011703, "Recovered data with negative head offset" },
- { 0x011704, "Recovered data with retries and/or CIRC applied" },
- { 0x011705, "Recovered data using previous sector ID" },
- { 0x011800, "Recovered data with error correction applied" },
- { 0x011801, "Recovered data with error correction and retries applied"},
- { 0x011802, "Recovered data - the data was auto-reallocated" },
- { 0x011803, "Recovered data with CIRC" },
- { 0x011804, "Recovered data with L-EC" },
- { 0x015d00,
- "Failure prediction threshold exceeded - Predicted logical unit failure" },
- { 0x015d01,
- "Failure prediction threshold exceeded - Predicted media failure" },
- { 0x015dff, "Failure prediction threshold exceeded - False" },
- { 0x017301, "Power calibration area almost full" },
- { 0x020400, "Logical unit not ready - cause not reportable" },
- /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
- { 0x020401,
- "Logical unit not ready - in progress [sic] of becoming ready" },
- { 0x020402, "Logical unit not ready - initializing command required" },
- { 0x020403, "Logical unit not ready - manual intervention required" },
- { 0x020404, "Logical unit not ready - format in progress" },
- { 0x020407, "Logical unit not ready - operation in progress" },
- { 0x020408, "Logical unit not ready - long write in progress" },
- { 0x020600, "No reference position found (media may be upside down)" },
- { 0x023000, "Incompatible medium installed" },
- { 0x023a00, "Medium not present" },
- { 0x025300, "Media load or eject failed" },
- { 0x025700, "Unable to recover table of contents" },
- { 0x030300, "Peripheral device write fault" },
- { 0x030301, "No write current" },
- { 0x030302, "Excessive write errors" },
- { 0x030c00, "Write error" },
- { 0x030c01, "Write error - Recovered with auto reallocation" },
- { 0x030c02, "Write error - auto reallocation failed" },
- { 0x030c03, "Write error - recommend reassignment" },
- { 0x030c04, "Compression check miscompare error" },
- { 0x030c05, "Data expansion occurred during compress" },
- { 0x030c06, "Block not compressible" },
- { 0x030c07, "Write error - recovery needed" },
- { 0x030c08, "Write error - recovery failed" },
- { 0x030c09, "Write error - loss of streaming" },
- { 0x031100, "Unrecovered read error" },
- { 0x031106, "CIRC unrecovered error" },
- { 0x033101, "Format command failed" },
- { 0x033200, "No defect spare location available" },
- { 0x033201, "Defect list update failure" },
- { 0x035100, "Erase failure" },
- { 0x037200, "Session fixation error" },
- { 0x037201, "Session fixation error writin lead-in" },
- { 0x037202, "Session fixation error writin lead-out" },
- { 0x037300, "CD control error" },
- { 0x037302, "Power calibration area is full" },
- { 0x037303, "Power calibration area error" },
- { 0x037304, "Program memory area / RMA update failure" },
- { 0x037305, "Program memory area / RMA is full" },
- { 0x037306, "Program memory area / RMA is (almost) full" },
-
- { 0x040200, "No seek complete" },
- { 0x040300, "Write fault" },
- { 0x040900, "Track following error" },
- { 0x040901, "Tracking servo failure" },
- { 0x040902, "Focus servo failure" },
- { 0x040903, "Spindle servo failure" },
- { 0x041500, "Random positioning error" },
- { 0x041501, "Mechanical positioning or changer error" },
- { 0x041502, "Positioning error detected by read of medium" },
- { 0x043c00, "Mechanical positioning or changer error" },
- { 0x044000, "Diagnostic failure on component (ASCQ)" },
- { 0x044400, "Internal CD/DVD logical unit failure" },
- { 0x04b600, "Media load mechanism failed" },
- { 0x051a00, "Parameter list length error" },
- { 0x052000, "Invalid command operation code" },
- { 0x052100, "Logical block address out of range" },
- { 0x052102, "Invalid address for write" },
- { 0x052400, "Invalid field in command packet" },
- { 0x052600, "Invalid field in parameter list" },
- { 0x052601, "Parameter not supported" },
- { 0x052602, "Parameter value invalid" },
- { 0x052700, "Write protected media" },
- { 0x052c00, "Command sequence error" },
- { 0x052c03, "Current program area is not empty" },
- { 0x052c04, "Current program area is empty" },
- { 0x053001, "Cannot read medium - unknown format" },
- { 0x053002, "Cannot read medium - incompatible format" },
- { 0x053900, "Saving parameters not supported" },
- { 0x054e00, "Overlapped commands attempted" },
- { 0x055302, "Medium removal prevented" },
- { 0x055500, "System resource failure" },
- { 0x056300, "End of user area encountered on this track" },
- { 0x056400, "Illegal mode for this track or incompatible medium" },
- { 0x056f00, "Copy protection key exchange failure - Authentication failure" },
- { 0x056f01, "Copy protection key exchange failure - Key not present" },
- { 0x056f02, "Copy protection key exchange failure - Key not established" },
- { 0x056f03, "Read of scrambled sector without authentication" },
- { 0x056f04, "Media region code is mismatched to logical unit" },
- { 0x056f05, "Drive region must be permanent / region reset count error" },
- { 0x057203, "Session fixation error - incomplete track in session" },
- { 0x057204, "Empty or partially written reserved track" },
- { 0x057205, "No more RZONE reservations are allowed" },
- { 0x05bf00, "Loss of streaming" },
- { 0x062800, "Not ready to ready transition, medium may have changed" },
- { 0x062900, "Power on, reset or hardware reset occurred" },
- { 0x062a00, "Parameters changed" },
- { 0x062a01, "Mode parameters changed" },
- { 0x062e00, "Insufficient time for operation" },
- { 0x063f00, "Logical unit operating conditions have changed" },
- { 0x063f01, "Microcode has been changed" },
- { 0x065a00, "Operator request or state change input (unspecified)" },
- { 0x065a01, "Operator medium removal request" },
- { 0x0bb900, "Play operation aborted" },
-
- /* Here we use 0xff for the key (not a valid key) to signify
- * that these can have _any_ key value associated with them... */
- { 0xff0401, "Logical unit is in process of becoming ready" },
- { 0xff0400, "Logical unit not ready, cause not reportable" },
- { 0xff0402, "Logical unit not ready, initializing command required" },
- { 0xff0403, "Logical unit not ready, manual intervention required" },
- { 0xff0500, "Logical unit does not respond to selection" },
- { 0xff0800, "Logical unit communication failure" },
- { 0xff0802, "Logical unit communication parity error" },
- { 0xff0801, "Logical unit communication time-out" },
- { 0xff2500, "Logical unit not supported" },
- { 0xff4c00, "Logical unit failed self-configuration" },
- { 0xff3e00, "Logical unit has not self-configured yet" },
-};
-#endif
-
+/* ide-cd_verbose.c */
+void ide_cd_log_error(const char *, struct request *, struct request_sense *);
+
+/* ide-cd.c functions used by ide-cd_ioctl.c */
+int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *,
+ unsigned *, struct request_sense *, int, unsigned int);
+int ide_cd_read_toc(ide_drive_t *, struct request_sense *);
+int ide_cdrom_get_capabilities(ide_drive_t *, u8 *);
+void ide_cdrom_update_speed(ide_drive_t *, u8 *);
+int cdrom_check_status(ide_drive_t *, struct request_sense *);
+
+/* ide-cd_ioctl.c */
+int ide_cdrom_open_real(struct cdrom_device_info *, int);
+void ide_cdrom_release_real(struct cdrom_device_info *);
+int ide_cdrom_drive_status(struct cdrom_device_info *, int);
+int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int);
+int ide_cdrom_tray_move(struct cdrom_device_info *, int);
+int ide_cdrom_lock_door(struct cdrom_device_info *, int);
+int ide_cdrom_select_speed(struct cdrom_device_info *, int);
+int ide_cdrom_get_last_session(struct cdrom_device_info *,
+ struct cdrom_multisession *);
+int ide_cdrom_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *);
+int ide_cdrom_reset(struct cdrom_device_info *cdi);
+int ide_cdrom_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
+int ide_cdrom_packet(struct cdrom_device_info *, struct packet_command *);
#endif /* _IDE_CD_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff