/*
- * linux/drivers/ide/ide-cd.c
+ * ATAPI CD-ROM driver.
*
- * Copyright (C) 1994, 1995, 1996 scott snyder <snyder@fnald0.fnal.gov>
- * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
- * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
+ * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
+ * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * ATAPI CD-ROM driver. To be used with ide.c.
* See Documentation/cdrom/ide-cd for usage information.
*
* Suggestions are welcome. Patches that work are more welcome though. ;-)
* For those wishing to work on this driver, please be sure you download
- * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
- * (SFF-8020i rev 2.6) standards. These documents can be obtained by
+ * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
+ * (SFF-8020i rev 2.6) standards. These documents can be obtained by
* anonymous ftp from:
* ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
* ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
*
- * Drives that deviate from these standards will be accommodated as much
- * as possible via compile time or command-line options. Since I only have
- * a few drives, you generally need to send me patches...
- *
- * ----------------------------------
- * TO DO LIST:
- * -Make it so that Pioneer CD DR-A24X and friends don't get screwed up on
- * boot
- *
- * ----------------------------------
- * 1.00 Oct 31, 1994 -- Initial version.
- * 1.01 Nov 2, 1994 -- Fixed problem with starting request in
- * cdrom_check_status.
- * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
- * (from mlord) -- minor changes to cdrom_setup()
- * -- renamed ide_dev_s to ide_drive_t, enable irq on command
- * 2.00 Nov 27, 1994 -- Generalize packet command interface;
- * add audio ioctls.
- * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
- * which send an interrupt when ready for a command.
- * 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
- * Don't use SCMD_PLAYAUDIO_TI; it's not included
- * in the current version of ATAPI.
- * Try to use LBA instead of track or MSF addressing
- * when possible.
- * Don't wait for READY_STAT.
- * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
- * other than 2k and to move multiple sectors in a
- * single transaction.
- * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
- * Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for
- * help in figuring this out. Ditto for Acer and
- * Aztech drives, which seem to have the same problem.
- * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
- * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
- * or data protect error.
- * Use HWIF and DEV_HWIF macros as in ide.c.
- * Always try to do a request_sense after
- * a failed command.
- * Include an option to give textual descriptions
- * of ATAPI errors.
- * Fix a bug in handling the sector cache which
- * showed up if the drive returned data in 512 byte
- * blocks (like Pioneer drives). Thanks to
- * Richard Hirst <srh@gpt.co.uk> for diagnosing this.
- * Properly supply the page number field in the
- * MODE_SELECT command.
- * PLAYAUDIO12 is broken on the Aztech; work around it.
- * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
- * (my apologies to Scott, but now ide-cd.c is independent)
- * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
- * Implement CDROMREADAUDIO ioctl (UNTESTED).
- * Use input_ide_data() and output_ide_data().
- * Add door locking.
- * Fix usage count leak in cdrom_open, which happened
- * when a read-write mount was attempted.
- * Try to load the disk on open.
- * Implement CDROMEJECT_SW ioctl (off by default).
- * Read total cdrom capacity during open.
- * Rearrange logic in cdrom_decode_status. Issue
- * request sense commands for failed packet commands
- * from here instead of from cdrom_queue_packet_command.
- * Fix a race condition in retrieving error information.
- * Suppress printing normal unit attention errors and
- * some drive not ready errors.
- * Implement CDROMVOLREAD ioctl.
- * Implement CDROMREADMODE1/2 ioctls.
- * Fix race condition in setting up interrupt handlers
- * when the `serialize' option is used.
- * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
- * cdrom_queue_request.
- * Another try at using ide_[input,output]_data.
- * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
- * Make VERBOSE_IDE_CD_ERRORS dump failed command again.
- * Dump out more information for ILLEGAL REQUEST errs.
- * Fix handling of errors occurring before the
- * packet command is transferred.
- * Fix transfers with odd bytelengths.
- * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
- * `DCI-2S10' drives are broken too.
- * 3.04 Nov 20, 1995 -- So are Vertos drives.
- * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
- * 3.06 Dec 16, 1995 -- Add support needed for partitions.
- * More workarounds for Vertos bugs (based on patches
- * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
- * Try to eliminate byteorder assumptions.
- * Use atapi_cdrom_subchnl struct definition.
- * Add STANDARD_ATAPI compilation option.
- * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
- * Vertos 300.
- * Add NO_DOOR_LOCKING configuration option.
- * Handle drive_cmd requests w/NULL args (for hdparm -t).
- * Work around sporadic Sony55e audio play problem.
- * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
- * problem with "hde=cdrom" with no drive present. -ml
- * 3.08 Mar 6, 1996 -- More Vertos workarounds.
- * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
- * Switch to using MSF addressing for audio commands.
- * Reformat to match kernel tabbing style.
- * Add CDROM_GET_UPC ioctl.
- * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
- * 3.11 Apr 29, 1996 -- Patch from Heiko Eissfeldt <heiko@colossus.escape.de>
- * to remove redundant verify_area calls.
- * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
- * from Gerhard Zuber <zuber@berlin.snafu.de>.
- * Let open succeed even if there's no loaded disc.
- * 3.13 May 19, 1996 -- Fixes for changer code.
- * 3.14 May 29, 1996 -- Add work-around for Vertos 600.
- * (From Hennus Bergman <hennus@sky.ow.nl>.)
- * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
- * from Ben Galliart <bgallia@luc.edu> with
- * special help from Jeff Lightfoot
- * <jeffml@pobox.com>
- * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
- * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
- * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
- * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
- * 3.18 Oct 31, 1996 -- Added module and DMA support.
- *
- *
- * 4.00 Nov 5, 1996 -- New ide-cd maintainer,
- * Erik B. Andersen <andersee@debian.org>
- * -- Newer Creative drives don't always set the error
- * register correctly. Make sure we see media changes
- * regardless.
- * -- Integrate with generic cdrom driver.
- * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
- * a patch from Ciro Cattuto <>.
- * -- Call set_device_ro.
- * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls, based on patch by Erik Andersen
- * -- Add some probes of drive capability during setup.
- *
- * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
- * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls in favor of a generalized approach
- * using the generic cdrom driver.
- * -- Fully integrated with the 2.1.X kernel.
- * -- Other stuff that I forgot (lots of changes)
- *
- * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il>
- * to fix the drive door locking problems.
- *
- * 4.03 Dec 04, 1996 -- Added DSC overlap support.
- * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
- * by Ales Makarov (xmakarov@sun.felk.cvut.cz)
- *
- * 4.05 Nov 20, 1997 -- Modified to print more drive info on init
- * Minor other changes
- * Fix errors on CDROMSTOP (If you have a "Dolphin",
- * you must define IHAVEADOLPHIN)
- * Added identifier so new Sanyo CD-changer works
- * Better detection if door locking isn't supported
- *
- * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
- * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
- * 4.08 Dec 18, 1997 -- spew less noise when tray is empty
- * -- fix speed display for ACER 24X, 18X
- * 4.09 Jan 04, 1998 -- fix handling of the last block so we return
- * an end of file instead of an I/O error (Gadi)
- * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
- * slot when there is no disc in the current slot.
- * -- Fixed a memory leak where info->changer_info was
- * malloc'ed but never free'd when closing the device.
- * -- Cleaned up the global namespace a bit by making more
- * functions static that should already have been.
- * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
- * based on a patch for 2.0.33 by Jelle Foks
- * <jelle@scintilla.utwente.nl>, a patch for 2.0.33
- * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
- * version, and my own efforts. -erik
- * -- Fixed a stupid bug which egcs was kind enough to
- * inform me of where "Illegal mode for this track"
- * was never returned due to a comparison on data
- * types of limited range.
- * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
- * now set ionly for CD-R and CD-RW drives. I had
- * removed this support because it produced errors.
- * It produced errors _only_ for non-writers. duh.
- * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
- * messages, since this is not an error.
- * -- Change error messages to be const
- * -- Remove a "\t" which looks ugly in the syslogs
- * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
- * since the .pdf version doesn't seem to work...
- * -- Updated the TODO list to something more current.
- *
- * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
- * patch thanks to "Eddie C. Dost" <ecd@skynet.be>
- *
- * 4.50 Oct 19, 1998 -- New maintainers!
- * Jens Axboe <axboe@image.dk>
- * Chris Zwilling <chris@cloudnet.com>
- *
- * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk>
- * - ide_cdrom_reset enabled since the ide subsystem
- * handles resets fine now. <axboe@image.dk>
- * - Transfer size fix for Samsung CD-ROMs, thanks to
- * "Ville Hallik" <ville.hallik@mail.ee>.
- * - other minor stuff.
- *
- * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk>
- * - Detect DVD-ROM/RAM drives
- *
- * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
- * drive in transfer size limit.
- * - Fix the I/O error when doing eject without a medium
- * loaded on some drives.
- * - CDROMREADMODE2 is now implemented through
- * CDROMREADRAW, since many drives don't support
- * MODE2 (even though ATAPI 2.6 says they must).
- * - Added ignore parameter to ide-cd (as a module), eg
- * insmod ide-cd ignore='hda hdb'
- * Useful when using ide-cd in conjunction with
- * ide-scsi. TODO: non-modular way of doing the
- * same.
- *
- * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
- * packet interface to cdrom.c.
- * - Unified audio ioctl support, most of it.
- * - cleaned up various deprecated verify_area().
- * - Added ide_cdrom_packet() as the interface for
- * the Uniform generic_packet().
- * - bunch of other stuff, will fill in logs later.
- * - report 1 slot for non-changers, like the other
- * cd-rom drivers. don't report select disc for
- * non-changers as well.
- * - mask out audio playing, if the device can't do it.
- *
- * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
- * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
- * use this independently of the actual audio handling.
- * They will disappear later when I get the time to
- * do it cleanly.
- * - Minimize the TOC reading - only do it when we
- * know a media change has occurred.
- * - Moved all the CDROMREADx ioctls to the Uniform layer.
- * - Heiko Eissfeldt <heiko@colossus.escape.de> supplied
- * some fixes for CDI.
- * - CD-ROM leaving door locked fix from Andries
- * Brouwer <Andries.Brouwer@cwi.nl>
- * - Erik Andersen <andersen@xmission.com> unified
- * commands across the various drivers and how
- * sense errors are handled.
- *
- * 4.56 Sep 12, 1999 - Removed changer support - it is now in the
- * Uniform layer.
- * - Added partition based multisession handling.
- * - Mode sense and mode select moved to the
- * Uniform layer.
- * - Fixed a problem with WPI CDS-32X drive - it
- * failed the capabilities
- *
- * 4.57 Apr 7, 2000 - Fixed sense reporting.
- * - Fixed possible oops in ide_cdrom_get_last_session()
- * - Fix locking mania and make ide_cdrom_reset relock
- * - Stop spewing errors to log when magicdev polls with
- * TEST_UNIT_READY on some drives.
- * - Various fixes from Tobias Ringstrom:
- * tray if it was locked prior to the reset.
- * - cdrom_read_capacity returns one frame too little.
- * - Fix real capacity reporting.
- *
- * 4.58 May 1, 2000 - Clean up ACER50 stuff.
- * - Fix small problem with ide_cdrom_capacity
- *
- * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
- * correctly sensing a disc change.
- * - Rearranged some code
- * - Use extended sense on drives that support it for
- * correctly reporting tray status -- from
- * Michael D Johnson <johnsom@orst.edu>
- * 4.60 Dec 17, 2003 - Add mt rainier support
- * - Bump timeout for packet commands, matches sr
- * - Odd stuff
- * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
- * Pascal Schmidt <der.eremit@email.de>
- *
- *************************************************************************/
-
-#define IDECD_VERSION "4.61"
+ * For historical changelog please see:
+ * Documentation/ide/ChangeLog.ide-cd.1994-2004
+ */
+
+#define IDECD_VERSION "5.00"
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/bcd.h>
-#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */
+/* For SCSI -> ATAPI command conversion */
+#include <scsi/scsi.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/byteorder.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include "ide-cd.h"
-static DECLARE_MUTEX(idecd_ref_sem);
+static DEFINE_MUTEX(idecd_ref_mutex);
-#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
+#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
#define ide_cd_g(disk) \
container_of((disk)->private_data, struct cdrom_info, driver)
+static void ide_cd_release(struct kref *);
+
static struct cdrom_info *ide_cd_get(struct gendisk *disk)
{
struct cdrom_info *cd = NULL;
- down(&idecd_ref_sem);
+ mutex_lock(&idecd_ref_mutex);
cd = ide_cd_g(disk);
- if (cd)
- kref_get(&cd->kref);
- up(&idecd_ref_sem);
+ if (cd) {
+ if (ide_device_get(cd->drive))
+ cd = NULL;
+ else
+ kref_get(&cd->kref);
+
+ }
+ mutex_unlock(&idecd_ref_mutex);
return cd;
}
-static void ide_cd_release(struct kref *);
-
static void ide_cd_put(struct cdrom_info *cd)
{
- down(&idecd_ref_sem);
+ ide_drive_t *drive = cd->drive;
+
+ mutex_lock(&idecd_ref_mutex);
kref_put(&cd->kref, ide_cd_release);
- up(&idecd_ref_sem);
+ ide_device_put(drive);
+ mutex_unlock(&idecd_ref_mutex);
}
-/****************************************************************************
+/*
* Generic packet command support and error handling routines.
*/
-/* Mark that we've seen a media change, and invalidate our internal
- buffers. */
-static void cdrom_saw_media_change (ide_drive_t *drive)
+/* Mark that we've seen a media change and invalidate our internal buffers. */
+static void cdrom_saw_media_change(ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
-
- CDROM_STATE_FLAGS (drive)->media_changed = 1;
- CDROM_STATE_FLAGS (drive)->toc_valid = 0;
- info->nsectors_buffered = 0;
+ drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
+ drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
}
static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
{
int log = 0;
- if (!sense || !rq || (rq->flags & REQ_QUIET))
+ if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
return 0;
switch (sense->sense_key) {
- case NO_SENSE: case RECOVERED_ERROR:
- break;
- case NOT_READY:
- /*
- * don't care about tray state messages for
- * e.g. capacity commands or in-progress or
- * becoming ready
- */
- if (sense->asc == 0x3a || sense->asc == 0x04)
- break;
- log = 1;
- break;
- case ILLEGAL_REQUEST:
- /*
- * don't log START_STOP unit with LoEj set, since
- * we cannot reliably check if drive can auto-close
- */
- if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
- log = 0;
- break;
- case UNIT_ATTENTION:
- /*
- * Make good and sure we've seen this potential media
- * change. Some drives (i.e. Creative) fail to present
- * the correct sense key in the error register.
- */
- cdrom_saw_media_change(drive);
+ case NO_SENSE:
+ case RECOVERED_ERROR:
+ break;
+ case NOT_READY:
+ /*
+ * don't care about tray state messages for e.g. capacity
+ * commands or in-progress or becoming ready
+ */
+ if (sense->asc == 0x3a || sense->asc == 0x04)
break;
- default:
- log = 1;
+ log = 1;
+ break;
+ case ILLEGAL_REQUEST:
+ /*
+ * don't log START_STOP unit with LoEj set, since we cannot
+ * reliably check if drive can auto-close
+ */
+ if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
break;
+ log = 1;
+ break;
+ case UNIT_ATTENTION:
+ /*
+ * Make good and sure we've seen this potential media change.
+ * Some drives (i.e. Creative) fail to present the correct sense
+ * key in the error register.
+ */
+ cdrom_saw_media_change(drive);
+ break;
+ default:
+ log = 1;
+ break;
}
return log;
}
-static
-void cdrom_analyze_sense_data(ide_drive_t *drive,
+static void cdrom_analyze_sense_data(ide_drive_t *drive,
struct request *failed_command,
struct request_sense *sense)
{
+ unsigned long sector;
+ unsigned long bio_sectors;
+ struct cdrom_info *info = drive->driver_data;
+
if (!cdrom_log_sense(drive, failed_command, sense))
return;
/*
- * If a read toc is executed for a CD-R or CD-RW medium where
- * the first toc has not been recorded yet, it will fail with
- * 05/24/00 (which is a confusing error)
+ * If a read toc is executed for a CD-R or CD-RW medium where the first
+ * toc has not been recorded yet, it will fail with 05/24/00 (which is a
+ * confusing error)
*/
if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
if (sense->sense_key == 0x05 && sense->asc == 0x24)
return;
-#if VERBOSE_IDE_CD_ERRORS
- {
- int i;
- const char *s = "bad sense key!";
- char buf[80];
-
- printk ("ATAPI device %s:\n", drive->name);
- if (sense->error_code==0x70)
- printk(" Error: ");
- else if (sense->error_code==0x71)
- printk(" Deferred Error: ");
- else if (sense->error_code == 0x7f)
- printk(" Vendor-specific Error: ");
- else
- printk(" Unknown Error Type: ");
-
- if (sense->sense_key < ARY_LEN(sense_key_texts))
- s = sense_key_texts[sense->sense_key];
-
- printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
-
- if (sense->asc == 0x40) {
- sprintf(buf, "Diagnostic failure on component 0x%02x",
- sense->ascq);
- s = buf;
- } else {
- int lo = 0, mid, hi = ARY_LEN(sense_data_texts);
- unsigned long key = (sense->sense_key << 16);
- key |= (sense->asc << 8);
- if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
- key |= sense->ascq;
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (sense_data_texts[mid].asc_ascq == key ||
- sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
- s = sense_data_texts[mid].text;
- break;
- }
- else if (sense_data_texts[mid].asc_ascq > key)
- hi = mid;
- else
- lo = mid+1;
- }
- }
-
- if (s == NULL) {
- if (sense->asc > 0x80)
- s = "(vendor-specific error)";
- else
- s = "(reserved error code)";
- }
-
- printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
- s, sense->asc, sense->ascq);
-
- if (failed_command != NULL) {
-
- int lo=0, mid, hi= ARY_LEN (packet_command_texts);
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (packet_command_texts[mid].packet_command ==
- failed_command->cmd[0]) {
- s = packet_command_texts[mid].text;
- break;
- }
- if (packet_command_texts[mid].packet_command >
- failed_command->cmd[0])
- hi = mid;
- else
- lo = mid+1;
- }
-
- printk (KERN_ERR " The failed \"%s\" packet command was: \n \"", s);
- for (i=0; i<sizeof (failed_command->cmd); i++)
- printk ("%02x ", failed_command->cmd[i]);
- printk ("\"\n");
- }
-
- /* The SKSV bit specifies validity of the sense_key_specific
- * in the next two commands. It is bit 7 of the first byte.
- * In the case of NOT_READY, if SKSV is set the drive can
- * give us nice ETA readings.
- */
- if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
- int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
- printk(KERN_ERR " Command is %02d%% complete\n", progress / 0xffff);
-
- }
+ /* current error */
+ if (sense->error_code == 0x70) {
+ switch (sense->sense_key) {
+ case MEDIUM_ERROR:
+ case VOLUME_OVERFLOW:
+ case ILLEGAL_REQUEST:
+ if (!sense->valid)
+ break;
+ if (failed_command == NULL ||
+ !blk_fs_request(failed_command))
+ break;
+ sector = (sense->information[0] << 24) |
+ (sense->information[1] << 16) |
+ (sense->information[2] << 8) |
+ (sense->information[3]);
- if (sense->sense_key == ILLEGAL_REQUEST &&
- (sense->sks[0] & 0x80) != 0) {
- printk(KERN_ERR " Error in %s byte %d",
- (sense->sks[0] & 0x40) != 0 ?
- "command packet" : "command data",
- (sense->sks[1] << 8) + sense->sks[2]);
+ if (drive->queue->hardsect_size == 2048)
+ /* device sector size is 2K */
+ sector <<= 2;
- if ((sense->sks[0] & 0x40) != 0)
- printk (" bit %d", sense->sks[0] & 0x07);
+ bio_sectors = max(bio_sectors(failed_command->bio), 4U);
+ sector &= ~(bio_sectors - 1);
- printk ("\n");
+ if (sector < get_capacity(info->disk) &&
+ drive->probed_capacity - sector < 4 * 75)
+ set_capacity(info->disk, sector);
}
}
-#else /* not VERBOSE_IDE_CD_ERRORS */
-
- /* Suppress printing unit attention and `in progress of becoming ready'
- errors when we're not being verbose. */
-
- if (sense->sense_key == UNIT_ATTENTION ||
- (sense->sense_key == NOT_READY && (sense->asc == 4 ||
- sense->asc == 0x3a)))
- return;
-
- printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x asc: 0x%02x ascq: 0x%02x\n",
- drive->name,
- sense->error_code, sense->sense_key,
- sense->asc, sense->ascq);
-#endif /* not VERBOSE_IDE_CD_ERRORS */
-}
-
-/*
- * Initialize a ide-cd packet command request
- */
-static void cdrom_prepare_request(ide_drive_t *drive, struct request *rq)
-{
- struct cdrom_info *cd = drive->driver_data;
-
- ide_init_drive_cmd(rq);
- rq->flags = REQ_PC;
- rq->rq_disk = cd->disk;
+ ide_cd_log_error(drive->name, failed_command, sense);
}
static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
sense = &info->sense_data;
/* stuff the sense request in front of our current request */
- cdrom_prepare_request(drive, rq);
+ blk_rq_init(NULL, rq);
+ rq->cmd_type = REQ_TYPE_ATA_PC;
+ rq->rq_disk = info->disk;
rq->data = sense;
rq->cmd[0] = GPCMD_REQUEST_SENSE;
- rq->cmd[4] = rq->data_len = 18;
+ rq->cmd[4] = 18;
+ rq->data_len = 18;
- rq->flags = REQ_SENSE;
+ rq->cmd_type = REQ_TYPE_SENSE;
+ rq->cmd_flags |= REQ_PREEMPT;
/* NOTE! Save the failed command in "rq->buffer" */
rq->buffer = (void *) failed_command;
- (void) ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
}
-static void cdrom_end_request (ide_drive_t *drive, int uptodate)
+static void cdrom_end_request(ide_drive_t *drive, int uptodate)
{
struct request *rq = HWGROUP(drive)->rq;
int nsectors = rq->hard_cur_sectors;
- if ((rq->flags & REQ_SENSE) && uptodate) {
+ if (blk_sense_request(rq) && uptodate) {
/*
- * For REQ_SENSE, "rq->buffer" points to the original failed
- * request
+ * For REQ_TYPE_SENSE, "rq->buffer" points to the original
+ * failed request
*/
struct request *failed = (struct request *) rq->buffer;
struct cdrom_info *info = drive->driver_data;
sense = failed->sense;
failed->sense_len = rq->sense_len;
}
-
+ cdrom_analyze_sense_data(drive, failed, sense);
/*
- * now end failed request
+ * now end the failed request
*/
- spin_lock_irqsave(&ide_lock, flags);
- end_that_request_chunk(failed, 0, failed->data_len);
- end_that_request_last(failed);
- spin_unlock_irqrestore(&ide_lock, flags);
- }
-
- cdrom_analyze_sense_data(drive, failed, sense);
+ if (blk_fs_request(failed)) {
+ if (ide_end_dequeued_request(drive, failed, 0,
+ failed->hard_nr_sectors))
+ BUG();
+ } else {
+ spin_lock_irqsave(&ide_lock, flags);
+ if (__blk_end_request(failed, -EIO,
+ failed->data_len))
+ BUG();
+ spin_unlock_irqrestore(&ide_lock, flags);
+ }
+ } else
+ cdrom_analyze_sense_data(drive, NULL, sense);
}
if (!rq->current_nr_sectors && blk_fs_request(rq))
ide_end_request(drive, uptodate, nsectors);
}
-/* Returns 0 if the request should be continued.
- Returns 1 if the request was ended. */
+static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
+{
+ if (st & 0x80)
+ return;
+ ide_dump_status(drive, msg, st);
+}
+
+/*
+ * Returns:
+ * 0: if the request should be continued.
+ * 1: if the request was ended.
+ */
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
- struct request *rq = HWGROUP(drive)->rq;
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
int stat, err, sense_key;
-
- /* Check for errors. */
- stat = HWIF(drive)->INB(IDE_STATUS_REG);
+
+ /* check for errors */
+ stat = hwif->tp_ops->read_status(hwif);
+
if (stat_ret)
*stat_ret = stat;
if (OK_STAT(stat, good_stat, BAD_R_STAT))
return 0;
- /* Get the IDE error register. */
- err = HWIF(drive)->INB(IDE_ERROR_REG);
+ /* get the IDE error register */
+ err = ide_read_error(drive);
sense_key = err >> 4;
if (rq == NULL) {
- printk("%s: missing rq in cdrom_decode_status\n", drive->name);
+ printk(KERN_ERR "%s: missing rq in %s\n",
+ drive->name, __func__);
return 1;
}
- if (rq->flags & REQ_SENSE) {
- /* We got an error trying to get sense info
- from the drive (probably while trying
- to recover from a former error). Just give up. */
-
- rq->flags |= REQ_FAILED;
+ if (blk_sense_request(rq)) {
+ /*
+ * We got an error trying to get sense info from the drive
+ * (probably while trying to recover from a former error).
+ * Just give up.
+ */
+ rq->cmd_flags |= REQ_FAILED;
cdrom_end_request(drive, 0);
ide_error(drive, "request sense failure", stat);
return 1;
- } else if (rq->flags & (REQ_PC | REQ_BLOCK_PC)) {
+ } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
/* All other functions, except for READ. */
- unsigned long flags;
/*
* if we have an error, pass back CHECK_CONDITION as the
* scsi status byte
*/
- if ((rq->flags & REQ_BLOCK_PC) && !rq->errors)
+ if (blk_pc_request(rq) && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
- /* Check for tray open. */
+ /* check for tray open */
if (sense_key == NOT_READY) {
- cdrom_saw_media_change (drive);
+ cdrom_saw_media_change(drive);
} else if (sense_key == UNIT_ATTENTION) {
- /* Check for media change. */
- cdrom_saw_media_change (drive);
- /*printk("%s: media changed\n",drive->name);*/
+ /* check for media change */
+ cdrom_saw_media_change(drive);
return 0;
- } else if (!(rq->flags & REQ_QUIET)) {
- /* Otherwise, print an error. */
+ } else if (sense_key == ILLEGAL_REQUEST &&
+ rq->cmd[0] == GPCMD_START_STOP_UNIT) {
+ /*
+ * Don't print error message for this condition--
+ * SFF8090i indicates that 5/24/00 is the correct
+ * response to a request to close the tray if the
+ * drive doesn't have that capability.
+ * cdrom_log_sense() knows this!
+ */
+ } else if (!(rq->cmd_flags & REQ_QUIET)) {
+ /* otherwise, print an error */
ide_dump_status(drive, "packet command error", stat);
}
-
- rq->flags |= REQ_FAILED;
+
+ rq->cmd_flags |= REQ_FAILED;
/*
* instead of playing games with moving completions around,
* remove failed request completely and end it when the
* request sense has completed
*/
- if (stat & ERR_STAT) {
- spin_lock_irqsave(&ide_lock, flags);
- blkdev_dequeue_request(rq);
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
-
- cdrom_queue_request_sense(drive, rq->sense, rq);
- } else
- cdrom_end_request(drive, 0);
+ goto end_request;
} else if (blk_fs_request(rq)) {
int do_end_request = 0;
- /* Handle errors from READ and WRITE requests. */
+ /* handle errors from READ and WRITE requests */
if (blk_noretry_request(rq))
do_end_request = 1;
if (sense_key == NOT_READY) {
- /* Tray open. */
+ /* tray open */
if (rq_data_dir(rq) == READ) {
- cdrom_saw_media_change (drive);
+ cdrom_saw_media_change(drive);
- /* Fail the request. */
- printk ("%s: tray open\n", drive->name);
+ /* fail the request */
+ printk(KERN_ERR "%s: tray open\n", drive->name);
do_end_request = 1;
} else {
struct cdrom_info *info = drive->driver_data;
- /* allow the drive 5 seconds to recover, some
+ /*
+ * Allow the drive 5 seconds to recover, some
* devices will return this error while flushing
- * data from cache */
+ * data from cache.
+ */
if (!rq->errors)
- info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY;
+ info->write_timeout = jiffies +
+ ATAPI_WAIT_WRITE_BUSY;
rq->errors = 1;
if (time_after(jiffies, info->write_timeout))
do_end_request = 1;
unsigned long flags;
/*
- * take a breather relying on the
- * unplug timer to kick us again
+ * take a breather relying on the unplug
+ * timer to kick us again
*/
spin_lock_irqsave(&ide_lock, flags);
blk_plug_device(drive->queue);
- spin_unlock_irqrestore(&ide_lock,flags);
+ spin_unlock_irqrestore(&ide_lock,
+ flags);
return 1;
}
}
} else if (sense_key == UNIT_ATTENTION) {
- /* Media change. */
- cdrom_saw_media_change (drive);
+ /* media change */
+ cdrom_saw_media_change(drive);
- /* Arrange to retry the request.
- But be sure to give up if we've retried
- too many times. */
+ /*
+ * Arrange to retry the request but be sure to give up
+ * if we've retried too many times.
+ */
if (++rq->errors > ERROR_MAX)
do_end_request = 1;
} else if (sense_key == ILLEGAL_REQUEST ||
sense_key == DATA_PROTECT) {
- /* No point in retrying after an illegal
- request or data protect error.*/
- ide_dump_status (drive, "command error", stat);
+ /*
+ * No point in retrying after an illegal request or data
+ * protect error.
+ */
+ ide_dump_status_no_sense(drive, "command error", stat);
do_end_request = 1;
} else if (sense_key == MEDIUM_ERROR) {
- /* No point in re-trying a zillion times on a bad
- * sector... If we got here the error is not correctable */
- ide_dump_status (drive, "media error (bad sector)", stat);
+ /*
+ * No point in re-trying a zillion times on a bad
+ * sector. If we got here the error is not correctable.
+ */
+ ide_dump_status_no_sense(drive,
+ "media error (bad sector)",
+ stat);
do_end_request = 1;
} else if (sense_key == BLANK_CHECK) {
- /* Disk appears blank ?? */
- ide_dump_status (drive, "media error (blank)", stat);
+ /* disk appears blank ?? */
+ ide_dump_status_no_sense(drive, "media error (blank)",
+ stat);
do_end_request = 1;
} else if ((err & ~ABRT_ERR) != 0) {
- /* Go to the default handler
- for other errors. */
+ /* go to the default handler for other errors */
ide_error(drive, "cdrom_decode_status", stat);
return 1;
} else if ((++rq->errors > ERROR_MAX)) {
- /* We've racked up too many retries. Abort. */
+ /* we've racked up too many retries, abort */
do_end_request = 1;
}
+ /*
+ * End a request through request sense analysis when we have
+ * sense data. We need this in order to perform end of media
+ * processing.
+ */
if (do_end_request)
- cdrom_end_request(drive, 0);
+ goto end_request;
- /* If we got a CHECK_CONDITION status,
- queue a request sense command. */
- if ((stat & ERR_STAT) != 0)
+ /*
+ * If we got a CHECK_CONDITION status, queue
+ * a request sense command.
+ */
+ if (stat & ERR_STAT)
cdrom_queue_request_sense(drive, NULL, NULL);
} else {
blk_dump_rq_flags(rq, "ide-cd: bad rq");
cdrom_end_request(drive, 0);
}
- /* Retry, or handle the next request. */
+ /* retry, or handle the next request */
+ return 1;
+
+end_request:
+ if (stat & ERR_STAT) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ blkdev_dequeue_request(rq);
+ HWGROUP(drive)->rq = NULL;
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ cdrom_queue_request_sense(drive, rq->sense, rq);
+ } else
+ cdrom_end_request(drive, 0);
+
return 1;
}
unsigned long wait = 0;
/*
- * Some commands are *slow* and normally take a long time to
- * complete. Usually we can use the ATAPI "disconnect" to bypass
- * this, but not all commands/drives support that. Let
- * ide_timer_expiry keep polling us for these.
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
*/
switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->flags & REQ_QUIET))
- printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]);
- wait = 0;
- break;
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
}
return wait;
}
-/* Set up the device registers for transferring a packet command on DEV,
- expecting to later transfer XFERLEN bytes. HANDLER is the routine
- which actually transfers the command to the drive. If this is a
- drq_interrupt device, this routine will arrange for HANDLER to be
- called when the interrupt from the drive arrives. Otherwise, HANDLER
- will be called immediately after the drive is prepared for the transfer. */
-
+/*
+ * Set up the device registers for transferring a packet command on DEV,
+ * expecting to later transfer XFERLEN bytes. HANDLER is the routine
+ * which actually transfers the command to the drive. If this is a
+ * drq_interrupt device, this routine will arrange for HANDLER to be
+ * called when the interrupt from the drive arrives. Otherwise, HANDLER
+ * will be called immediately after the drive is prepared for the transfer.
+ */
static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
int xferlen,
ide_handler_t *handler)
{
- ide_startstop_t startstop;
struct cdrom_info *info = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- /* Wait for the controller to be idle. */
- if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY))
- return startstop;
-
+ /* FIXME: for Virtual DMA we must check harder */
if (info->dma)
- info->dma = !hwif->dma_setup(drive);
+ info->dma = !hwif->dma_ops->dma_setup(drive);
+
+ /* set up the controller registers */
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
+ xferlen, info->dma);
+
+ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ /* waiting for CDB interrupt, not DMA yet. */
+ if (info->dma)
+ drive->waiting_for_dma = 0;
- /* Set up the controller registers. */
- /* FIXME: for Virtual DMA we must check harder */
- HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG);
- HWIF(drive)->OUTB(0, IDE_IREASON_REG);
- HWIF(drive)->OUTB(0, IDE_SECTOR_REG);
-
- HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG);
- HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG);
- if (IDE_CONTROL_REG)
- HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
-
- if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
/* packet command */
- ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ide_execute_command(drive, WIN_PACKETCMD, handler,
+ ATAPI_WAIT_PC, cdrom_timer_expiry);
return ide_started;
} else {
- unsigned long flags;
-
- /* packet command */
- spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG);
- ndelay(400);
- spin_unlock_irqrestore(&ide_lock, flags);
+ ide_execute_pkt_cmd(drive);
return (*handler) (drive);
}
}
-/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN.
- The device registers must have already been prepared
- by cdrom_start_packet_command.
- HANDLER is the interrupt handler to call when the command completes
- or there's data ready. */
/*
- * changed 5 parameters to 3 for dvd-ram
- * struct packet_command *pc; now packet_command_t *pc;
+ * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
+ * registers must have already been prepared by cdrom_start_packet_command.
+ * HANDLER is the interrupt handler to call when the command completes or
+ * there's data ready.
*/
#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
struct request *rq,
ide_handler_t *handler)
{
struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;
- if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
- /* Here we should have been called after receiving an interrupt
- from the device. DRQ should how be set. */
+ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ /*
+ * Here we should have been called after receiving an interrupt
+ * from the device. DRQ should how be set.
+ */
- /* Check for errors. */
+ /* check for errors */
if (cdrom_decode_status(drive, DRQ_STAT, NULL))
return ide_stopped;
+
+ /* ok, next interrupt will be DMA interrupt */
+ if (info->dma)
+ drive->waiting_for_dma = 1;
} else {
- /* Otherwise, we must wait for DRQ to get set. */
+ /* otherwise, we must wait for DRQ to get set */
if (ide_wait_stat(&startstop, drive, DRQ_STAT,
BUSY_STAT, WAIT_READY))
return startstop;
}
- /* Arm the interrupt handler. */
+ /* arm the interrupt handler */
ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
if (cmd_len < ATAPI_MIN_CDB_BYTES)
cmd_len = ATAPI_MIN_CDB_BYTES;
- /* Send the command to the device. */
- HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
+ /* send the command to the device */
+ hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
- /* Start the DMA if need be */
+ /* start the DMA if need be */
if (info->dma)
- hwif->dma_start(drive);
+ hwif->dma_ops->dma_start(drive);
return ide_started;
}
-/****************************************************************************
- * Block read functions.
- */
-
-/*
- * Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector
- * buffer. Once the first sector is added, any subsequent sectors are
- * assumed to be continuous (until the buffer is cleared). For the first
- * sector added, SECTOR is its sector number. (SECTOR is then ignored until
- * the buffer is cleared.)
- */
-static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
- int sectors_to_transfer)
-{
- struct cdrom_info *info = drive->driver_data;
-
- /* Number of sectors to read into the buffer. */
- int sectors_to_buffer = min_t(int, sectors_to_transfer,
- (SECTOR_BUFFER_SIZE >> SECTOR_BITS) -
- info->nsectors_buffered);
-
- char *dest;
-
- /* If we couldn't get a buffer, don't try to buffer anything... */
- if (info->buffer == NULL)
- sectors_to_buffer = 0;
-
- /* If this is the first sector in the buffer, remember its number. */
- if (info->nsectors_buffered == 0)
- info->sector_buffered = sector;
-
- /* Read the data into the buffer. */
- dest = info->buffer + info->nsectors_buffered * SECTOR_SIZE;
- while (sectors_to_buffer > 0) {
- HWIF(drive)->atapi_input_bytes(drive, dest, SECTOR_SIZE);
- --sectors_to_buffer;
- --sectors_to_transfer;
- ++info->nsectors_buffered;
- dest += SECTOR_SIZE;
- }
-
- /* Throw away any remaining data. */
- while (sectors_to_transfer > 0) {
- static char dum[SECTOR_SIZE];
- HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
- --sectors_to_transfer;
- }
-}
-
/*
* Check the contents of the interrupt reason register from the cdrom
* and attempt to recover if there are problems. Returns 0 if everything's
* ok; nonzero if the request has been terminated.
*/
-static inline
-int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
+static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
+ int len, int ireason, int rw)
{
- if (ireason == 2)
+ ide_hwif_t *hwif = drive->hwif;
+
+ /*
+ * ireason == 0: the drive wants to receive data from us
+ * ireason == 2: the drive is expecting to transfer data to us
+ */
+ if (ireason == (!rw << 1))
return 0;
- else if (ireason == 0) {
- /* Whoops... The drive is expecting to receive data from us! */
- printk(KERN_ERR "%s: read_intr: Drive wants to transfer data the "
- "wrong way!\n", drive->name);
-
- /* Throw some data at the drive so it doesn't hang
- and quit this request. */
- while (len > 0) {
- int dum = 0;
- HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof (dum));
- len -= sizeof (dum);
- }
- } else if (ireason == 1) {
- /* Some drives (ASUS) seem to tell us that status
- * info is available. just get it and ignore.
+ else if (ireason == (rw << 1)) {
+
+ /* whoops... */
+ printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
+ drive->name, __func__);
+
+ ide_pad_transfer(drive, rw, len);
+ } else if (rw == 0 && ireason == 1) {
+ /*
+ * Some drives (ASUS) seem to tell us that status info is
+ * available. Just get it and ignore.
*/
- (void) HWIF(drive)->INB(IDE_STATUS_REG);
+ (void)hwif->tp_ops->read_status(hwif);
return 0;
} else {
- /* Drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR "%s: read_intr: bad interrupt reason %x\n", drive->name,
- ireason);
+ /* drive wants a command packet, or invalid ireason... */
+ printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
+ drive->name, __func__, ireason);
}
+ if (rq->cmd_type == REQ_TYPE_ATA_PC)
+ rq->cmd_flags |= REQ_FAILED;
+
cdrom_end_request(drive, 0);
return -1;
}
/*
- * Interrupt routine. Called when a read request has completed.
+ * Assume that the drive will always provide data in multiples of at least
+ * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
*/
-static ide_startstop_t cdrom_read_intr (ide_drive_t *drive)
+static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
{
- int stat;
- int ireason, len, sectors_to_transfer, nskip;
- struct cdrom_info *info = drive->driver_data;
- u8 lowcyl = 0, highcyl = 0;
- int dma = info->dma, dma_error = 0;
-
- struct request *rq = HWGROUP(drive)->rq;
-
- /*
- * handle dma case
- */
- if (dma) {
- info->dma = 0;
- if ((dma_error = HWIF(drive)->ide_dma_end(drive)))
- __ide_dma_off(drive);
- }
-
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- if (dma) {
- if (!dma_error) {
- ide_end_request(drive, 1, rq->nr_sectors);
- return ide_stopped;
- } else
- return ide_error(drive, "dma error", stat);
- }
-
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
-
- len = lowcyl + (256 * highcyl);
-
- /* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
- /* If we're not done filling the current buffer, complain.
- Otherwise, complete the command normally. */
- if (rq->current_nr_sectors > 0) {
- printk (KERN_ERR "%s: cdrom_read_intr: data underrun (%d blocks)\n",
- drive->name, rq->current_nr_sectors);
- rq->flags |= REQ_FAILED;
- cdrom_end_request(drive, 0);
- } else
- cdrom_end_request(drive, 1);
- return ide_stopped;
- }
+ if ((len % SECTOR_SIZE) == 0)
+ return 0;
- /* Check that the drive is expecting to do the same thing we are. */
- if (cdrom_read_check_ireason (drive, len, ireason))
- return ide_stopped;
+ printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
+ drive->name, __func__, len);
- /* Assume that the drive will always provide data in multiples
- of at least SECTOR_SIZE, as it gets hairy to keep track
- of the transfers otherwise. */
- if ((len % SECTOR_SIZE) != 0) {
- printk (KERN_ERR "%s: cdrom_read_intr: Bad transfer size %d\n",
- drive->name, len);
- if (CDROM_CONFIG_FLAGS(drive)->limit_nframes)
- printk (KERN_ERR " This drive is not supported by this version of the driver\n");
- else {
- printk (KERN_ERR " Trying to limit transfer sizes\n");
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- }
- cdrom_end_request(drive, 0);
- return ide_stopped;
+ if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
+ printk(KERN_ERR " This drive is not supported by "
+ "this version of the driver\n");
+ else {
+ printk(KERN_ERR " Trying to limit transfer sizes\n");
+ drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
}
- /* The number of sectors we need to read from the drive. */
- sectors_to_transfer = len / SECTOR_SIZE;
-
- /* First, figure out if we need to bit-bucket
- any of the leading sectors. */
- nskip = min_t(int, rq->current_nr_sectors - bio_cur_sectors(rq->bio), sectors_to_transfer);
-
- while (nskip > 0) {
- /* We need to throw away a sector. */
- static char dum[SECTOR_SIZE];
- HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
-
- --rq->current_nr_sectors;
- --nskip;
- --sectors_to_transfer;
- }
+ return 1;
+}
- /* Now loop while we still have data to read from the drive. */
- while (sectors_to_transfer > 0) {
- int this_transfer;
+static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
- /* If we've filled the present buffer but there's another
- chained buffer after it, move on. */
- if (rq->current_nr_sectors == 0 && rq->nr_sectors)
- cdrom_end_request(drive, 1);
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+ struct request *rq)
+{
+ if (rq_data_dir(rq) == READ) {
+ unsigned short sectors_per_frame =
+ queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ int nskip = rq->sector & (sectors_per_frame - 1);
- /* If the buffers are full, cache the rest of the data in our
- internal buffer. */
- if (rq->current_nr_sectors == 0) {
- cdrom_buffer_sectors(drive, rq->sector, sectors_to_transfer);
- sectors_to_transfer = 0;
- } else {
- /* Transfer data to the buffers.
- Figure out how many sectors we can transfer
- to the current buffer. */
- this_transfer = min_t(int, sectors_to_transfer,
- rq->current_nr_sectors);
-
- /* Read this_transfer sectors
- into the current buffer. */
- while (this_transfer > 0) {
- HWIF(drive)->atapi_input_bytes(drive, rq->buffer, SECTOR_SIZE);
- rq->buffer += SECTOR_SIZE;
- --rq->nr_sectors;
- --rq->current_nr_sectors;
- ++rq->sector;
- --this_transfer;
- --sectors_to_transfer;
+ /*
+ * If the requested sector doesn't start on a frame boundary,
+ * we must adjust the start of the transfer so that it does,
+ * and remember to skip the first few sectors.
+ *
+ * If the rq->current_nr_sectors field is larger than the size
+ * of the buffer, it will mean that we're to skip a number of
+ * sectors equal to the amount by which rq->current_nr_sectors
+ * is larger than the buffer size.
+ */
+ if (nskip > 0) {
+ /* sanity check... */
+ if (rq->current_nr_sectors !=
+ bio_cur_sectors(rq->bio)) {
+ printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
+ drive->name, __func__,
+ rq->current_nr_sectors);
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
}
+ rq->current_nr_sectors += nskip;
}
}
+#if 0
+ else
+ /* the immediate bit */
+ rq->cmd[1] = 1 << 3;
+#endif
+ /* set up the command */
+ rq->timeout = ATAPI_WAIT_PC;
- /* Done moving data! Wait for another interrupt. */
- ide_set_handler(drive, &cdrom_read_intr, ATAPI_WAIT_PC, NULL);
return ide_started;
}
/*
- * Try to satisfy some of the current read request from our cached data.
- * Returns nonzero if the request has been completed, zero otherwise.
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
*/
-static int cdrom_read_from_buffer (ide_drive_t *drive)
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+ struct request *rq = drive->hwif->hwgroup->rq;
+
+ /* send the command to the drive and return */
+ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
+}
+
+#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
+#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
+#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
+
+static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
{
struct cdrom_info *info = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
-
- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
-
- /* Can't do anything if there's no buffer. */
- if (info->buffer == NULL) return 0;
-
- /* Loop while this request needs data and the next block is present
- in our cache. */
- while (rq->nr_sectors > 0 &&
- rq->sector >= info->sector_buffered &&
- rq->sector < info->sector_buffered + info->nsectors_buffered) {
- if (rq->current_nr_sectors == 0)
- cdrom_end_request(drive, 1);
-
- memcpy (rq->buffer,
- info->buffer +
- (rq->sector - info->sector_buffered) * SECTOR_SIZE,
- SECTOR_SIZE);
- rq->buffer += SECTOR_SIZE;
- --rq->current_nr_sectors;
- --rq->nr_sectors;
- ++rq->sector;
- }
+ int stat;
+ static int retry = 10;
- /* If we've satisfied the current request,
- terminate it successfully. */
- if (rq->nr_sectors == 0) {
- cdrom_end_request(drive, 1);
- return -1;
- }
+ if (cdrom_decode_status(drive, 0, &stat))
+ return ide_stopped;
- /* Move on to the next buffer if needed. */
- if (rq->current_nr_sectors == 0)
- cdrom_end_request(drive, 1);
+ drive->atapi_flags |= IDE_AFLAG_SEEKING;
- /* If this condition does not hold, then the kluge i use to
- represent the number of sectors to skip at the start of a transfer
- will fail. I think that this will never happen, but let's be
- paranoid and check. */
- if (rq->current_nr_sectors < bio_cur_sectors(rq->bio) &&
- (rq->sector & (sectors_per_frame - 1))) {
- printk(KERN_ERR "%s: cdrom_read_from_buffer: buffer botch (%ld)\n",
- drive->name, (long)rq->sector);
- cdrom_end_request(drive, 0);
- return -1;
+ if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
+ if (--retry == 0)
+ drive->dsc_overlap = 0;
}
-
- return 0;
+ return ide_stopped;
}
-/*
- * Routine to send a read packet command to the drive.
- * This is usually called directly from cdrom_start_read.
- * However, for drq_interrupt devices, it is called from an interrupt
- * when the drive is ready to accept the command.
- */
-static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
- int nskip;
-
- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
-
- /* If the requested sector doesn't start on a cdrom block boundary,
- we must adjust the start of the transfer so that it does,
- and remember to skip the first few sectors.
- If the CURRENT_NR_SECTORS field is larger than the size
- of the buffer, it will mean that we're to skip a number
- of sectors equal to the amount by which CURRENT_NR_SECTORS
- is larger than the buffer size. */
- nskip = rq->sector & (sectors_per_frame - 1);
- if (nskip > 0) {
- /* Sanity check... */
- if (rq->current_nr_sectors != bio_cur_sectors(rq->bio) &&
- (rq->sector & (sectors_per_frame - 1))) {
- printk(KERN_ERR "%s: cdrom_start_read_continuation: buffer botch (%u)\n",
- drive->name, rq->current_nr_sectors);
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
- rq->current_nr_sectors += nskip;
- }
-
- /* Set up the command */
- rq->timeout = ATAPI_WAIT_PC;
-
- /* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, rq, &cdrom_read_intr);
-}
-
-
-#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
-#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
-#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
-
-static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive)
+static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
{
- struct cdrom_info *info = drive->driver_data;
- int stat;
- static int retry = 10;
-
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
- CDROM_CONFIG_FLAGS(drive)->seeking = 1;
-
- if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
- if (--retry == 0) {
- /*
- * this condition is far too common, to bother
- * users about it
- */
- /* printk("%s: disabled DSC seek overlap\n", drive->name);*/
- drive->dsc_overlap = 0;
- }
- }
- return ide_stopped;
-}
-
-static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
sector_t frame = rq->sector;
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
- memset(rq->cmd, 0, sizeof(rq->cmd));
+ memset(rq->cmd, 0, BLK_MAX_CDB);
rq->cmd[0] = GPCMD_SEEK;
put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
rq->timeout = ATAPI_WAIT_PC;
- return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
}
-static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block)
+static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
+ struct request *rq = drive->hwif->hwgroup->rq;
- info->dma = 0;
- info->cmd = 0;
- info->start_seek = jiffies;
- return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation);
+ return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
}
-/* Fix up a possibly partially-processed request so that we can
- start it over entirely, or even put it back on the request queue. */
-static void restore_request (struct request *rq)
+/*
+ * Fix up a possibly partially-processed request so that we can start it over
+ * entirely, or even put it back on the request queue.
+ */
+static void restore_request(struct request *rq)
{
if (rq->buffer != bio_data(rq->bio)) {
- sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE;
+ sector_t n =
+ (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
rq->buffer = bio_data(rq->bio);
rq->nr_sectors += n;
rq->sector -= n;
}
- rq->hard_cur_sectors = rq->current_nr_sectors = bio_cur_sectors(rq->bio);
+ rq->current_nr_sectors = bio_cur_sectors(rq->bio);
+ rq->hard_cur_sectors = rq->current_nr_sectors;
rq->hard_nr_sectors = rq->nr_sectors;
rq->hard_sector = rq->sector;
rq->q->prep_rq_fn(rq->q, rq);
}
/*
- * Start a read request from the CD-ROM.
- */
-static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block)
-{
- struct cdrom_info *info = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
-
- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
-
- /* We may be retrying this request after an error. Fix up
- any weirdness which might be present in the request packet. */
- restore_request(rq);
-
- /* Satisfy whatever we can of this request from our cached sector. */
- if (cdrom_read_from_buffer(drive))
- return ide_stopped;
-
- blk_attempt_remerge(drive->queue, rq);
-
- /* Clear the local sector buffer. */
- info->nsectors_buffered = 0;
-
- /* use dma, if possible. */
- info->dma = drive->using_dma;
- if ((rq->sector & (sectors_per_frame - 1)) ||
- (rq->nr_sectors & (sectors_per_frame - 1)))
- info->dma = 0;
-
- info->cmd = READ;
-
- /* Start sending the read request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation);
-}
-
-/****************************************************************************
- * Execute all other packet commands.
+ * All other packet commands.
*/
-
-/* Interrupt routine for packet command completion. */
-static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
+static void ide_cd_request_sense_fixup(struct request *rq)
{
- int ireason, len, thislen;
- struct request *rq = HWGROUP(drive)->rq;
- u8 lowcyl = 0, highcyl = 0;
- int stat;
-
- /* Check for errors. */
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG);
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
-
- len = lowcyl + (256 * highcyl);
-
- /* If DRQ is clear, the command has completed.
- Complain if we still have data left to transfer. */
- if ((stat & DRQ_STAT) == 0) {
- /* Some of the trailing request sense fields are optional, and
- some drives don't send them. Sigh. */
- if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
- rq->data_len > 0 &&
- rq->data_len <= 5) {
- while (rq->data_len > 0) {
- *(unsigned char *)rq->data++ = 0;
- --rq->data_len;
- }
- }
-
- if (rq->data_len == 0)
- cdrom_end_request(drive, 1);
- else {
- /* Comment this out, because this always happens
- right after a reset occurs, and it is annoying to
- always print expected stuff. */
- /*
- printk ("%s: cdrom_pc_intr: data underrun %d\n",
- drive->name, pc->buflen);
- */
- rq->flags |= REQ_FAILED;
- cdrom_end_request(drive, 0);
- }
- return ide_stopped;
- }
-
- /* Figure out how much data to transfer. */
- thislen = rq->data_len;
- if (thislen > len) thislen = len;
-
- /* The drive wants to be written to. */
- if ((ireason & 3) == 0) {
- if (!rq->data) {
- blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
- goto confused;
- }
- /* Transfer the data. */
- HWIF(drive)->atapi_output_bytes(drive, rq->data, thislen);
-
- /* If we haven't moved enough data to satisfy the drive,
- add some padding. */
- while (len > thislen) {
- int dum = 0;
- HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
- }
-
- /* Keep count of how much data we've moved. */
- rq->data += thislen;
- rq->data_len -= thislen;
- }
-
- /* Same drill for reading. */
- else if ((ireason & 3) == 2) {
- if (!rq->data) {
- blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
- goto confused;
- }
- /* Transfer the data. */
- HWIF(drive)->atapi_input_bytes(drive, rq->data, thislen);
-
- /* If we haven't moved enough data to satisfy the drive,
- add some padding. */
- while (len > thislen) {
- int dum = 0;
- HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
+ /*
+ * Some of the trailing request sense fields are optional,
+ * and some drives don't send them. Sigh.
+ */
+ if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
+ rq->data_len > 0 && rq->data_len <= 5)
+ while (rq->data_len > 0) {
+ *(u8 *)rq->data++ = 0;
+ --rq->data_len;
}
-
- /* Keep count of how much data we've moved. */
- rq->data += thislen;
- rq->data_len -= thislen;
-
- if (rq->flags & REQ_SENSE)
- rq->sense_len += thislen;
- } else {
-confused:
- printk (KERN_ERR "%s: cdrom_pc_intr: The drive "
- "appears confused (ireason = 0x%02x)\n",
- drive->name, ireason);
- rq->flags |= REQ_FAILED;
- }
-
- /* Now we wait for another interrupt. */
- ide_set_handler(drive, &cdrom_pc_intr, ATAPI_WAIT_PC, cdrom_timer_expiry);
- return ide_started;
}
-static ide_startstop_t cdrom_do_pc_continuation (ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
-
- if (!rq->timeout)
- rq->timeout = ATAPI_WAIT_PC;
-
- /* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, rq, &cdrom_pc_intr);
-}
-
-
-static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive)
+int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
+ int write, void *buffer, unsigned *bufflen,
+ struct request_sense *sense, int timeout,
+ unsigned int cmd_flags)
{
- int len;
- struct request *rq = HWGROUP(drive)->rq;
struct cdrom_info *info = drive->driver_data;
+ struct request_sense local_sense;
+ int retries = 10;
+ unsigned int flags = 0;
- info->dma = 0;
- info->cmd = 0;
- rq->flags &= ~REQ_FAILED;
- len = rq->data_len;
+ if (!sense)
+ sense = &local_sense;
- /* Start sending the command to the drive. */
- return cdrom_start_packet_command(drive, len, cdrom_do_pc_continuation);
-}
+ /* start of retry loop */
+ do {
+ struct request *rq;
+ int error;
+ rq = blk_get_request(drive->queue, write, __GFP_WAIT);
-static
-int cdrom_queue_packet_command(ide_drive_t *drive, struct request *rq)
-{
- struct request_sense sense;
- int retries = 10;
- unsigned int flags = rq->flags;
+ memcpy(rq->cmd, cmd, BLK_MAX_CDB);
+ rq->cmd_type = REQ_TYPE_ATA_PC;
+ rq->sense = sense;
+ rq->cmd_flags |= cmd_flags;
+ rq->timeout = timeout;
+ if (buffer) {
+ rq->data = buffer;
+ rq->data_len = *bufflen;
+ }
- if (rq->sense == NULL)
- rq->sense = &sense;
+ error = blk_execute_rq(drive->queue, info->disk, rq, 0);
- /* Start of retry loop. */
- do {
- int error;
- unsigned long time = jiffies;
- rq->flags = flags;
+ if (buffer)
+ *bufflen = rq->data_len;
- error = ide_do_drive_cmd(drive, rq, ide_wait);
- time = jiffies - time;
+ flags = rq->cmd_flags;
+ blk_put_request(rq);
- /* FIXME: we should probably abort/retry or something
- * in case of failure */
- if (rq->flags & REQ_FAILED) {
- /* The request failed. Retry if it was due to a unit
- attention status
- (usually means media was changed). */
- struct request_sense *reqbuf = rq->sense;
+ /*
+ * FIXME: we should probably abort/retry or something in case of
+ * failure.
+ */
+ if (flags & REQ_FAILED) {
+ /*
+ * The request failed. Retry if it was due to a unit
+ * attention status (usually means media was changed).
+ */
+ struct request_sense *reqbuf = sense;
if (reqbuf->sense_key == UNIT_ATTENTION)
cdrom_saw_media_change(drive);
else if (reqbuf->sense_key == NOT_READY &&
reqbuf->asc == 4 && reqbuf->ascq != 4) {
- /* The drive is in the process of loading
- a disk. Retry, but wait a little to give
- the drive time to complete the load. */
+ /*
+ * The drive is in the process of loading
+ * a disk. Retry, but wait a little to give
+ * the drive time to complete the load.
+ */
ssleep(2);
} else {
- /* Otherwise, don't retry. */
+ /* otherwise, don't retry */
retries = 0;
}
--retries;
}
- /* End of retry loop. */
- } while ((rq->flags & REQ_FAILED) && retries >= 0);
+ /* end of retry loop */
+ } while ((flags & REQ_FAILED) && retries >= 0);
- /* Return an error if the command failed. */
- return (rq->flags & REQ_FAILED) ? -EIO : 0;
+ /* return an error if the command failed */
+ return (flags & REQ_FAILED) ? -EIO : 0;
}
/*
- * Write handling
+ * Called from blk_end_request_callback() after the data of the request is
+ * completed and before the request itself is completed. By returning value '1',
+ * blk_end_request_callback() returns immediately without completing it.
*/
-static inline int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
+static int cdrom_newpc_intr_dummy_cb(struct request *rq)
{
- /* Two notes about IDE interrupt reason here - 0 means that
- * the drive wants to receive data from us, 2 means that
- * the drive is expecting to transfer data to us.
- */
- if (ireason == 0)
- return 0;
- else if (ireason == 2) {
- /* Whoops... The drive wants to send data. */
- printk(KERN_ERR "%s: write_intr: wrong transfer direction!\n",
- drive->name);
-
- while (len > 0) {
- int dum = 0;
- HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
- }
- } else {
- /* Drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR "%s: write_intr: bad interrupt reason %x\n",
- drive->name, ireason);
- }
-
- cdrom_end_request(drive, 0);
return 1;
}
-static void post_transform_command(struct request *req)
-{
- u8 *c = req->cmd;
- char *ibuf;
-
- if (!blk_pc_request(req))
- return;
-
- if (req->bio)
- ibuf = bio_data(req->bio);
- else
- ibuf = req->data;
-
- if (!ibuf)
- return;
-
- /*
- * set ansi-revision and response data as atapi
- */
- if (c[0] == GPCMD_INQUIRY) {
- ibuf[2] |= 2;
- ibuf[3] = (ibuf[3] & 0xf0) | 2;
- }
-}
-
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
-
-/*
- * best way to deal with dma that is not sector aligned right now... note
- * that in this path we are not using ->data or ->buffer at all. this irs
- * can replace cdrom_pc_intr, cdrom_read_intr, and cdrom_write_intr in the
- * future.
- */
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
- int dma_error, dma, stat, ireason, len, thislen;
- u8 lowcyl, highcyl;
xfer_func_t *xferfunc;
- unsigned long flags;
-
- /* Check for errors. */
- dma_error = 0;
+ ide_expiry_t *expiry = NULL;
+ int dma_error = 0, dma, stat, thislen, uptodate = 0;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
+ unsigned int timeout;
+ u16 len;
+ u8 ireason;
+
+ /* check for errors */
dma = info->dma;
if (dma) {
info->dma = 0;
- dma_error = HWIF(drive)->ide_dma_end(drive);
+ dma_error = hwif->dma_ops->dma_end(drive);
+ if (dma_error) {
+ printk(KERN_ERR "%s: DMA %s error\n", drive->name,
+ write ? "write" : "read");
+ ide_dma_off(drive);
+ }
}
if (cdrom_decode_status(drive, 0, &stat))
return ide_stopped;
- /*
- * using dma, transfer is complete now
- */
+ /* using dma, transfer is complete now */
if (dma) {
- if (dma_error) {
- printk(KERN_ERR "ide-cd: dma error\n");
- __ide_dma_off(drive);
+ if (dma_error)
return ide_error(drive, "dma error", stat);
+ if (blk_fs_request(rq)) {
+ ide_end_request(drive, 1, rq->nr_sectors);
+ return ide_stopped;
}
-
- end_that_request_chunk(rq, 1, rq->data_len);
- rq->data_len = 0;
goto end_request;
}
- /*
- * ok we fall to pio :/
- */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+ ide_read_bcount_and_ireason(drive, &len, &ireason);
- len = lowcyl + (256 * highcyl);
- thislen = rq->data_len;
+ thislen = blk_fs_request(rq) ? len : rq->data_len;
if (thislen > len)
thislen = len;
- /*
- * If DRQ is clear, the command has completed.
- */
- if ((stat & DRQ_STAT) == 0)
+ /* If DRQ is clear, the command has completed. */
+ if ((stat & DRQ_STAT) == 0) {
+ if (blk_fs_request(rq)) {
+ /*
+ * If we're not done reading/writing, complain.
+ * Otherwise, complete the command normally.
+ */
+ uptodate = 1;
+ if (rq->current_nr_sectors > 0) {
+ printk(KERN_ERR "%s: %s: data underrun "
+ "(%d blocks)\n",
+ drive->name, __func__,
+ rq->current_nr_sectors);
+ if (!write)
+ rq->cmd_flags |= REQ_FAILED;
+ uptodate = 0;
+ }
+ cdrom_end_request(drive, uptodate);
+ return ide_stopped;
+ } else if (!blk_pc_request(rq)) {
+ ide_cd_request_sense_fixup(rq);
+ /* complain if we still have data left to transfer */
+ uptodate = rq->data_len ? 0 : 1;
+ }
goto end_request;
+ }
- /*
- * check which way to transfer data
- */
- if (rq_data_dir(rq) == WRITE) {
- /*
- * write to drive
- */
- if (cdrom_write_check_ireason(drive, len, ireason))
- return ide_stopped;
+ /* check which way to transfer data */
+ if (ide_cd_check_ireason(drive, rq, len, ireason, write))
+ return ide_stopped;
- xferfunc = HWIF(drive)->atapi_output_bytes;
- } else {
- /*
- * read from drive
- */
- if (cdrom_read_check_ireason(drive, len, ireason))
- return ide_stopped;
+ if (blk_fs_request(rq)) {
+ if (write == 0) {
+ int nskip;
+
+ if (ide_cd_check_transfer_size(drive, len)) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
- xferfunc = HWIF(drive)->atapi_input_bytes;
+ /*
+ * First, figure out if we need to bit-bucket
+ * any of the leading sectors.
+ */
+ nskip = min_t(int, rq->current_nr_sectors
+ - bio_cur_sectors(rq->bio),
+ thislen >> 9);
+ if (nskip > 0) {
+ ide_pad_transfer(drive, write, nskip << 9);
+ rq->current_nr_sectors -= nskip;
+ thislen -= (nskip << 9);
+ }
+ }
}
- /*
- * transfer data
- */
+ if (ireason == 0) {
+ write = 1;
+ xferfunc = hwif->tp_ops->output_data;
+ } else {
+ write = 0;
+ xferfunc = hwif->tp_ops->input_data;
+ }
+
+ /* transfer data */
while (thislen > 0) {
- int blen = blen = rq->data_len;
- char *ptr = rq->data;
+ u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
+ int blen = rq->data_len;
- /*
- * bio backed?
- */
+ /* bio backed? */
if (rq->bio) {
- ptr = bio_data(rq->bio);
- blen = bio_iovec(rq->bio)->bv_len;
+ if (blk_fs_request(rq)) {
+ ptr = rq->buffer;
+ blen = rq->current_nr_sectors << 9;
+ } else {
+ ptr = bio_data(rq->bio);
+ blen = bio_iovec(rq->bio)->bv_len;
+ }
}
if (!ptr) {
- printk(KERN_ERR "%s: confused, missing data\n", drive->name);
+ if (blk_fs_request(rq) && !write)
+ /*
+ * If the buffers are full, pipe the rest into
+ * oblivion.
+ */
+ ide_pad_transfer(drive, 0, thislen);
+ else {
+ printk(KERN_ERR "%s: confused, missing data\n",
+ drive->name);
+ blk_dump_rq_flags(rq, rq_data_dir(rq)
+ ? "cdrom_newpc_intr, write"
+ : "cdrom_newpc_intr, read");
+ }
break;
}
if (blen > thislen)
blen = thislen;
- xferfunc(drive, ptr, blen);
+ xferfunc(drive, NULL, ptr, blen);
thislen -= blen;
len -= blen;
- rq->data_len -= blen;
- if (rq->bio)
- end_that_request_chunk(rq, 1, blen);
- else
- rq->data += blen;
- }
+ if (blk_fs_request(rq)) {
+ rq->buffer += blen;
+ rq->nr_sectors -= (blen >> 9);
+ rq->current_nr_sectors -= (blen >> 9);
+ rq->sector += (blen >> 9);
- /*
- * pad, if necessary
- */
- if (len > 0) {
- while (len > 0) {
- int pad = 0;
+ if (rq->current_nr_sectors == 0 && rq->nr_sectors)
+ cdrom_end_request(drive, 1);
+ } else {
+ rq->data_len -= blen;
- xferfunc(drive, &pad, sizeof(pad));
- len -= sizeof(pad);
+ /*
+ * The request can't be completed until DRQ is cleared.
+ * So complete the data, but don't complete the request
+ * using the dummy function for the callback feature
+ * of blk_end_request_callback().
+ */
+ if (rq->bio)
+ blk_end_request_callback(rq, 0, blen,
+ cdrom_newpc_intr_dummy_cb);
+ else
+ rq->data += blen;
}
+ if (!write && blk_sense_request(rq))
+ rq->sense_len += blen;
}
- if (HWGROUP(drive)->handler != NULL)
- BUG();
-
- ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, NULL);
- return ide_started;
-
-end_request:
- if (!rq->data_len)
- post_transform_command(rq);
-
- spin_lock_irqsave(&ide_lock, flags);
- blkdev_dequeue_request(rq);
- end_that_request_last(rq);
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
- return ide_stopped;
-}
-
-static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
-{
- int stat, ireason, len, sectors_to_transfer, uptodate;
- struct cdrom_info *info = drive->driver_data;
- int dma_error = 0, dma = info->dma;
- u8 lowcyl = 0, highcyl = 0;
-
- struct request *rq = HWGROUP(drive)->rq;
+ /* pad, if necessary */
+ if (!blk_fs_request(rq) && len > 0)
+ ide_pad_transfer(drive, write, len);
- /* Check for errors. */
- if (dma) {
- info->dma = 0;
- if ((dma_error = HWIF(drive)->ide_dma_end(drive))) {
- printk(KERN_ERR "ide-cd: write dma error\n");
- __ide_dma_off(drive);
- }
+ if (blk_pc_request(rq)) {
+ timeout = rq->timeout;
+ } else {
+ timeout = ATAPI_WAIT_PC;
+ if (!blk_fs_request(rq))
+ expiry = cdrom_timer_expiry;
}
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- /*
- * using dma, transfer is complete now
- */
- if (dma) {
- if (dma_error)
- return ide_error(drive, "dma error", stat);
-
- ide_end_request(drive, 1, rq->nr_sectors);
- return ide_stopped;
- }
+ ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
+ return ide_started;
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG);
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+end_request:
+ if (blk_pc_request(rq)) {
+ unsigned long flags;
+ unsigned int dlen = rq->data_len;
- len = lowcyl + (256 * highcyl);
+ if (dma)
+ rq->data_len = 0;
- /* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
- /* If we're not done writing, complain.
- * Otherwise, complete the command normally.
- */
- uptodate = 1;
- if (rq->current_nr_sectors > 0) {
- printk(KERN_ERR "%s: write_intr: data underrun (%d blocks)\n",
- drive->name, rq->current_nr_sectors);
- uptodate = 0;
- }
+ spin_lock_irqsave(&ide_lock, flags);
+ if (__blk_end_request(rq, 0, dlen))
+ BUG();
+ HWGROUP(drive)->rq = NULL;
+ spin_unlock_irqrestore(&ide_lock, flags);
+ } else {
+ if (!uptodate)
+ rq->cmd_flags |= REQ_FAILED;
cdrom_end_request(drive, uptodate);
- return ide_stopped;
- }
-
- /* Check that the drive is expecting to do the same thing we are. */
- if (cdrom_write_check_ireason(drive, len, ireason))
- return ide_stopped;
-
- sectors_to_transfer = len / SECTOR_SIZE;
-
- /*
- * now loop and write out the data
- */
- while (sectors_to_transfer > 0) {
- int this_transfer;
-
- if (!rq->current_nr_sectors) {
- printk(KERN_ERR "ide-cd: write_intr: oops\n");
- break;
- }
-
- /*
- * Figure out how many sectors we can transfer
- */
- this_transfer = min_t(int, sectors_to_transfer, rq->current_nr_sectors);
-
- while (this_transfer > 0) {
- HWIF(drive)->atapi_output_bytes(drive, rq->buffer, SECTOR_SIZE);
- rq->buffer += SECTOR_SIZE;
- --rq->nr_sectors;
- --rq->current_nr_sectors;
- ++rq->sector;
- --this_transfer;
- --sectors_to_transfer;
- }
-
- /*
- * current buffer complete, move on
- */
- if (rq->current_nr_sectors == 0 && rq->nr_sectors)
- cdrom_end_request(drive, 1);
}
-
- /* re-arm handler */
- ide_set_handler(drive, &cdrom_write_intr, ATAPI_WAIT_PC, NULL);
- return ide_started;
-}
-
-static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
-
-#if 0 /* the immediate bit */
- rq->cmd[1] = 1 << 3;
-#endif
- rq->timeout = ATAPI_WAIT_PC;
-
- return cdrom_transfer_packet_command(drive, rq, cdrom_write_intr);
+ return ide_stopped;
}
-static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
+static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
{
- struct cdrom_info *info = drive->driver_data;
- struct gendisk *g = info->disk;
- unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
-
- /*
- * writes *must* be hardware frame aligned
- */
- if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
- (rq->sector & (sectors_per_frame - 1))) {
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- /*
- * disk has become write protected
- */
- if (g->policy) {
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- /*
- * for dvd-ram and such media, it's a really big deal to get
- * big writes all the time. so scour the queue and attempt to
- * remerge requests, often the plugging will not have had time
- * to do this properly
- */
- blk_attempt_remerge(drive->queue, rq);
+ struct cdrom_info *cd = drive->driver_data;
+ int write = rq_data_dir(rq) == WRITE;
+ unsigned short sectors_per_frame =
+ queue_hardsect_size(drive->queue) >> SECTOR_BITS;
- info->nsectors_buffered = 0;
+ if (write) {
+ /* disk has become write protected */
+ if (cd->disk->policy) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+ } else {
+ /*
+ * We may be retrying this request after an error. Fix up any
+ * weirdness which might be present in the request packet.
+ */
+ restore_request(rq);
+ }
- /* use dma, if possible. we don't need to check more, since we
- * know that the transfer is always (at least!) frame aligned */
- info->dma = drive->using_dma ? 1 : 0;
- info->cmd = WRITE;
+ /* use DMA, if possible / writes *must* be hardware frame aligned */
+ if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
+ (rq->sector & (sectors_per_frame - 1))) {
+ if (write) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+ cd->dma = 0;
+ } else
+ cd->dma = drive->using_dma;
- info->devinfo.media_written = 1;
+ if (write)
+ cd->devinfo.media_written = 1;
- /* Start sending the write request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont);
+ return ide_started;
}
static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
- if (!rq->timeout)
- rq->timeout = ATAPI_WAIT_PC;
-
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
-static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
+static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *info = drive->driver_data;
- rq->flags |= REQ_QUIET;
+ if (blk_pc_request(rq))
+ rq->cmd_flags |= REQ_QUIET;
+ else
+ rq->cmd_flags &= ~REQ_FAILED;
info->dma = 0;
- info->cmd = 0;
- /*
- * sg request
- */
- if (rq->bio) {
- int mask = drive->queue->dma_alignment;
- unsigned long addr = (unsigned long) page_address(bio_page(rq->bio));
+ /* sg request */
+ if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
+ struct request_queue *q = drive->queue;
+ unsigned int alignment;
+ unsigned long addr;
+ unsigned long stack_mask = ~(THREAD_SIZE - 1);
+
+ if (rq->bio)
+ addr = (unsigned long)bio_data(rq->bio);
+ else
+ addr = (unsigned long)rq->data;
- info->cmd = rq_data_dir(rq);
info->dma = drive->using_dma;
/*
* NOTE! The "len" and "addr" checks should possibly have
* separate masks.
*/
- if ((rq->data_len & 15) || (addr & mask))
+ alignment = queue_dma_alignment(q) | q->dma_pad_mask;
+ if (addr & alignment || rq->data_len & alignment)
info->dma = 0;
- }
- /* Start sending the command to the drive. */
- return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont);
+ if (!((addr & stack_mask) ^
+ ((unsigned long)current->stack & stack_mask)))
+ info->dma = 0;
+ }
}
-/****************************************************************************
+/*
* cdrom driver request routine.
*/
-static ide_startstop_t
-ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block)
+static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
+ sector_t block)
{
- ide_startstop_t action;
struct cdrom_info *info = drive->driver_data;
+ ide_handler_t *fn;
+ int xferlen;
if (blk_fs_request(rq)) {
- if (CDROM_CONFIG_FLAGS(drive)->seeking) {
+ if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
+ ide_hwif_t *hwif = drive->hwif;
unsigned long elapsed = jiffies - info->start_seek;
- int stat = HWIF(drive)->INB(IDE_STATUS_REG);
+ int stat = hwif->tp_ops->read_status(hwif);
if ((stat & SEEK_STAT) != SEEK_STAT) {
if (elapsed < IDECD_SEEK_TIMEOUT) {
- ide_stall_queue(drive, IDECD_SEEK_TIMER);
+ ide_stall_queue(drive,
+ IDECD_SEEK_TIMER);
return ide_stopped;
}
- printk (KERN_ERR "%s: DSC timeout\n", drive->name);
+ printk(KERN_ERR "%s: DSC timeout\n",
+ drive->name);
}
- CDROM_CONFIG_FLAGS(drive)->seeking = 0;
+ drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
}
- if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) {
- action = cdrom_start_seek(drive, block);
+ if (rq_data_dir(rq) == READ &&
+ IDE_LARGE_SEEK(info->last_block, block,
+ IDECD_SEEK_THRESHOLD) &&
+ drive->dsc_overlap) {
+ xferlen = 0;
+ fn = cdrom_start_seek_continuation;
+
+ info->dma = 0;
+ info->start_seek = jiffies;
+
+ ide_cd_prepare_seek_request(drive, rq);
} else {
- if (rq_data_dir(rq) == READ)
- action = cdrom_start_read(drive, block);
- else
- action = cdrom_start_write(drive, rq);
+ xferlen = 32768;
+ fn = cdrom_start_rw_cont;
+
+ if (cdrom_start_rw(drive, rq) == ide_stopped)
+ return ide_stopped;
+
+ if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+ return ide_stopped;
}
info->last_block = block;
- return action;
- } else if (rq->flags & (REQ_PC | REQ_SENSE)) {
- return cdrom_do_packet_command(drive);
- } else if (rq->flags & REQ_BLOCK_PC) {
- return cdrom_do_block_pc(drive, rq);
- } else if (rq->flags & REQ_SPECIAL) {
- /*
- * right now this can only be a reset...
- */
+ } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+ rq->cmd_type == REQ_TYPE_ATA_PC) {
+ xferlen = rq->data_len;
+ fn = cdrom_do_newpc_cont;
+
+ if (!rq->timeout)
+ rq->timeout = ATAPI_WAIT_PC;
+
+ cdrom_do_block_pc(drive, rq);
+ } else if (blk_special_request(rq)) {
+ /* right now this can only be a reset... */
cdrom_end_request(drive, 1);
return ide_stopped;
+ } else {
+ blk_dump_rq_flags(rq, "ide-cd bad flags");
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
}
- blk_dump_rq_flags(rq, "ide-cd bad flags");
- cdrom_end_request(drive, 0);
- return ide_stopped;
+ return cdrom_start_packet_command(drive, xferlen, fn);
}
-
-
-/****************************************************************************
+/*
* Ioctl handling.
*
- * Routines which queue packet commands take as a final argument a pointer
- * to a request_sense struct. If execution of the command results
- * in an error with a CHECK CONDITION status, this structure will be filled
- * with the results of the subsequent request sense command. The pointer
- * can also be NULL, in which case no sense information is returned.
+ * Routines which queue packet commands take as a final argument a pointer to a
+ * request_sense struct. If execution of the command results in an error with a
+ * CHECK CONDITION status, this structure will be filled with the results of the
+ * subsequent request sense command. The pointer can also be NULL, in which case
+ * no sense information is returned.
*/
-
-#if ! STANDARD_ATAPI
-static inline
-int bin2bcd (int x)
-{
- return (x%10) | ((x/10) << 4);
-}
-
-
-static inline
-int bcd2bin (int x)
-{
- return (x >> 4) * 10 + (x & 0x0f);
-}
-
-static
-void msf_from_bcd (struct atapi_msf *msf)
-{
- msf->minute = bcd2bin (msf->minute);
- msf->second = bcd2bin (msf->second);
- msf->frame = bcd2bin (msf->frame);
-}
-
-#endif /* not STANDARD_ATAPI */
-
-
-static inline
-void lba_to_msf (int lba, byte *m, byte *s, byte *f)
-{
- lba += CD_MSF_OFFSET;
- lba &= 0xffffff; /* negative lbas use only 24 bits */
- *m = lba / (CD_SECS * CD_FRAMES);
- lba %= (CD_SECS * CD_FRAMES);
- *s = lba / CD_FRAMES;
- *f = lba % CD_FRAMES;
-}
-
-
-static inline
-int msf_to_lba (byte m, byte s, byte f)
+static void msf_from_bcd(struct atapi_msf *msf)
{
- return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+ msf->minute = BCD2BIN(msf->minute);
+ msf->second = BCD2BIN(msf->second);
+ msf->frame = BCD2BIN(msf->frame);
}
-static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
+int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
{
- struct request req;
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *cdi = &info->devinfo;
+ unsigned char cmd[BLK_MAX_CDB];
- cdrom_prepare_request(drive, &req);
-
- req.sense = sense;
- req.cmd[0] = GPCMD_TEST_UNIT_READY;
- req.flags |= REQ_QUIET;
-
-#if ! STANDARD_ATAPI
- /* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
- switch CDs instead of supporting the LOAD_UNLOAD opcode */
-
- req.cmd[7] = cdi->sanyo_slot % 3;
-#endif /* not STANDARD_ATAPI */
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-
-/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
-static int
-cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense)
-{
- struct request_sense my_sense;
- struct request req;
- int stat;
-
- if (sense == NULL)
- sense = &my_sense;
-
- /* If the drive cannot lock the door, just pretend. */
- if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) {
- stat = 0;
- } else {
- cdrom_prepare_request(drive, &req);
- req.sense = sense;
- req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- req.cmd[4] = lockflag ? 1 : 0;
- stat = cdrom_queue_packet_command(drive, &req);
- }
-
- /* If we got an illegal field error, the drive
- probably cannot lock the door. */
- if (stat != 0 &&
- sense->sense_key == ILLEGAL_REQUEST &&
- (sense->asc == 0x24 || sense->asc == 0x20)) {
- printk (KERN_ERR "%s: door locking not supported\n",
- drive->name);
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
- stat = 0;
- }
-
- /* no medium, that's alright. */
- if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
- stat = 0;
-
- if (stat == 0)
- CDROM_STATE_FLAGS(drive)->door_locked = lockflag;
-
- return stat;
-}
-
-
-/* Eject the disk if EJECTFLAG is 0.
- If EJECTFLAG is 1, try to reload the disk. */
-static int cdrom_eject(ide_drive_t *drive, int ejectflag,
- struct request_sense *sense)
-{
- struct request req;
- char loej = 0x02;
-
- if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag)
- return -EDRIVE_CANT_DO_THIS;
-
- /* reload fails on some drives, if the tray is locked */
- if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag)
- return 0;
-
- cdrom_prepare_request(drive, &req);
+ memset(cmd, 0, BLK_MAX_CDB);
+ cmd[0] = GPCMD_TEST_UNIT_READY;
- /* only tell drive to close tray if open, if it can do that */
- if (ejectflag && !CDROM_CONFIG_FLAGS(drive)->close_tray)
- loej = 0;
+ /*
+ * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
+ * instead of supporting the LOAD_UNLOAD opcode.
+ */
+ cmd[7] = cdi->sanyo_slot % 3;
- req.sense = sense;
- req.cmd[0] = GPCMD_START_STOP_UNIT;
- req.cmd[4] = loej | (ejectflag != 0);
- return cdrom_queue_packet_command(drive, &req);
+ return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, REQ_QUIET);
}
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
struct request_sense *sense)
{
struct {
- __u32 lba;
- __u32 blocklen;
+ __be32 lba;
+ __be32 blocklen;
} capbuf;
int stat;
- struct request req;
+ unsigned char cmd[BLK_MAX_CDB];
+ unsigned len = sizeof(capbuf);
+ u32 blocklen;
- cdrom_prepare_request(drive, &req);
+ memset(cmd, 0, BLK_MAX_CDB);
+ cmd[0] = GPCMD_READ_CDVD_CAPACITY;
- req.sense = sense;
- req.cmd[0] = GPCMD_READ_CDVD_CAPACITY;
- req.data = (char *)&capbuf;
- req.data_len = sizeof(capbuf);
+ stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
+ REQ_QUIET);
+ if (stat)
+ return stat;
- stat = cdrom_queue_packet_command(drive, &req);
- if (stat == 0) {
- *capacity = 1 + be32_to_cpu(capbuf.lba);
- *sectors_per_frame =
- be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+ /*
+ * Sanity check the given block size
+ */
+ blocklen = be32_to_cpu(capbuf.blocklen);
+ switch (blocklen) {
+ case 512:
+ case 1024:
+ case 2048:
+ case 4096:
+ break;
+ default:
+ printk(KERN_ERR "%s: weird block size %u\n",
+ drive->name, blocklen);
+ printk(KERN_ERR "%s: default to 2kb block size\n",
+ drive->name);
+ blocklen = 2048;
+ break;
}
- return stat;
+ *capacity = 1 + be32_to_cpu(capbuf.lba);
+ *sectors_per_frame = blocklen >> SECTOR_BITS;
+ return 0;
}
static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
int format, char *buf, int buflen,
struct request_sense *sense)
{
- struct request req;
+ unsigned char cmd[BLK_MAX_CDB];
- cdrom_prepare_request(drive, &req);
+ memset(cmd, 0, BLK_MAX_CDB);
- req.sense = sense;
- req.data = buf;
- req.data_len = buflen;
- req.flags |= REQ_QUIET;
- req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
- req.cmd[6] = trackno;
- req.cmd[7] = (buflen >> 8);
- req.cmd[8] = (buflen & 0xff);
- req.cmd[9] = (format << 6);
+ cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
+ cmd[6] = trackno;
+ cmd[7] = (buflen >> 8);
+ cmd[8] = (buflen & 0xff);
+ cmd[9] = (format << 6);
if (msf_flag)
- req.cmd[1] = 2;
+ cmd[1] = 2;
- return cdrom_queue_packet_command(drive, &req);
+ return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET);
}
-
/* Try to read the entire TOC for the disk into our internal buffer. */
-static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
+int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
{
int stat, ntracks, i;
struct cdrom_info *info = drive->driver_data;
unsigned long sectors_per_frame = SECTORS_PER_FRAME;
if (toc == NULL) {
- /* Try to allocate space. */
+ /* try to allocate space */
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
if (toc == NULL) {
- printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name);
+ printk(KERN_ERR "%s: No cdrom TOC buffer!\n",
+ drive->name);
return -ENOMEM;
}
info->toc = toc;
}
- /* Check to see if the existing data is still valid.
- If it is, just return. */
+ /*
+ * Check to see if the existing data is still valid. If it is,
+ * just return.
+ */
(void) cdrom_check_status(drive, sense);
- if (CDROM_STATE_FLAGS(drive)->toc_valid)
+ if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
return 0;
- /* Try to get the total cdrom capacity and sector size. */
+ /* try to get the total cdrom capacity and sector size */
stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame,
sense);
if (stat)
toc->capacity = 0x1fffff;
set_capacity(info->disk, toc->capacity * sectors_per_frame);
+ /* save a private copy of the TOC capacity for error handling */
+ drive->probed_capacity = toc->capacity * sectors_per_frame;
+
blk_queue_hardsect_size(drive->queue,
sectors_per_frame << SECTOR_BITS);
- /* First read just the header, so we know how long the TOC is. */
+ /* first read just the header, so we know how long the TOC is */
stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
sizeof(struct atapi_toc_header), sense);
if (stat)
return stat;
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
+ if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
+ toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
}
-#endif /* not STANDARD_ATAPI */
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
if (ntracks <= 0)
if (ntracks > MAX_TRACKS)
ntracks = MAX_TRACKS;
- /* Now read the whole schmeer. */
+ /* now read the whole schmeer */
stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
(char *)&toc->hdr,
sizeof(struct atapi_toc_header) +
sizeof(struct atapi_toc_entry), sense);
if (stat && toc->hdr.first_track > 1) {
- /* Cds with CDI tracks only don't have any TOC entries,
- despite of this the returned values are
- first_track == last_track = number of CDI tracks + 1,
- so that this case is indistinguishable from the same
- layout plus an additional audio track.
- If we get an error for the regular case, we assume
- a CDI without additional audio tracks. In this case
- the readable TOC is empty (CDI tracks are not included)
- and only holds the Leadout entry. Heiko Eißfeldt */
+ /*
+ * Cds with CDI tracks only don't have any TOC entries, despite
+ * of this the returned values are
+ * first_track == last_track = number of CDI tracks + 1,
+ * so that this case is indistinguishable from the same layout
+ * plus an additional audio track. If we get an error for the
+ * regular case, we assume a CDI without additional audio
+ * tracks. In this case the readable TOC is empty (CDI tracks
+ * are not included) and only holds the Leadout entry.
+ *
+ * Heiko Eißfeldt.
+ */
ntracks = 0;
stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
- (char *)&toc->hdr,
- sizeof(struct atapi_toc_header) +
- (ntracks + 1) *
- sizeof(struct atapi_toc_entry),
- sense);
- if (stat) {
- return stat;
- }
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bin2bcd(CDROM_LEADOUT);
- toc->hdr.last_track = bin2bcd(CDROM_LEADOUT);
- } else
-#endif /* not STANDARD_ATAPI */
- {
- toc->hdr.first_track = CDROM_LEADOUT;
- toc->hdr.last_track = CDROM_LEADOUT;
- }
- }
-
- if (stat)
- return stat;
-
- toc->hdr.toc_length = ntohs (toc->hdr.toc_length);
-
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
- }
-#endif /* not STANDARD_ATAPI */
-
- for (i=0; i<=ntracks; i++) {
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd)
- toc->ent[i].track = bcd2bin(toc->ent[i].track);
- msf_from_bcd(&toc->ent[i].addr.msf);
- }
-#endif /* not STANDARD_ATAPI */
- toc->ent[i].addr.lba = msf_to_lba (toc->ent[i].addr.msf.minute,
- toc->ent[i].addr.msf.second,
- toc->ent[i].addr.msf.frame);
- }
-
- /* Read the multisession information. */
- if (toc->hdr.first_track != CDROM_LEADOUT) {
- /* Read the multisession information. */
- stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
- sizeof(ms_tmp), sense);
- if (stat)
- return stat;
-
- toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
- } else {
- ms_tmp.hdr.first_track = ms_tmp.hdr.last_track = CDROM_LEADOUT;
- toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
- }
-
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
- /* Re-read multisession information using MSF format */
- stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
- sizeof(ms_tmp), sense);
- if (stat)
- return stat;
-
- msf_from_bcd (&ms_tmp.ent.addr.msf);
- toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
- ms_tmp.ent.addr.msf.second,
- ms_tmp.ent.addr.msf.frame);
- }
-#endif /* not STANDARD_ATAPI */
-
- toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
-
- /* Now try to get the total cdrom capacity. */
- stat = cdrom_get_last_written(cdi, &last_written);
- if (!stat && (last_written > toc->capacity)) {
- toc->capacity = last_written;
- set_capacity(info->disk, toc->capacity * sectors_per_frame);
- }
-
- /* Remember that we've read this stuff. */
- CDROM_STATE_FLAGS(drive)->toc_valid = 1;
-
- return 0;
-}
-
-
-static int cdrom_read_subchannel(ide_drive_t *drive, int format, char *buf,
- int buflen, struct request_sense *sense)
-{
- struct request req;
-
- cdrom_prepare_request(drive, &req);
-
- req.sense = sense;
- req.data = buf;
- req.data_len = buflen;
- req.cmd[0] = GPCMD_READ_SUBCHANNEL;
- req.cmd[1] = 2; /* MSF addressing */
- req.cmd[2] = 0x40; /* request subQ data */
- req.cmd[3] = format;
- req.cmd[7] = (buflen >> 8);
- req.cmd[8] = (buflen & 0xff);
- return cdrom_queue_packet_command(drive, &req);
-}
-
-/* ATAPI cdrom drives are free to select the speed you request or any slower
- rate :-( Requesting too fast a speed will _not_ produce an error. */
-static int cdrom_select_speed(ide_drive_t *drive, int speed,
- struct request_sense *sense)
-{
- struct request req;
- cdrom_prepare_request(drive, &req);
-
- req.sense = sense;
- if (speed == 0)
- speed = 0xffff; /* set to max */
- else
- speed *= 177; /* Nx to kbytes/s */
-
- req.cmd[0] = GPCMD_SET_SPEED;
- /* Read Drive speed in kbytes/second MSB */
- req.cmd[2] = (speed >> 8) & 0xff;
- /* Read Drive speed in kbytes/second LSB */
- req.cmd[3] = speed & 0xff;
- if (CDROM_CONFIG_FLAGS(drive)->cd_r ||
- CDROM_CONFIG_FLAGS(drive)->cd_rw ||
- CDROM_CONFIG_FLAGS(drive)->dvd_r) {
- /* Write Drive speed in kbytes/second MSB */
- req.cmd[4] = (speed >> 8) & 0xff;
- /* Write Drive speed in kbytes/second LSB */
- req.cmd[5] = speed & 0xff;
- }
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-static int cdrom_play_audio(ide_drive_t *drive, int lba_start, int lba_end)
-{
- struct request_sense sense;
- struct request req;
-
- cdrom_prepare_request(drive, &req);
-
- req.sense = &sense;
- req.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
- lba_to_msf(lba_start, &req.cmd[3], &req.cmd[4], &req.cmd[5]);
- lba_to_msf(lba_end-1, &req.cmd[6], &req.cmd[7], &req.cmd[8]);
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-static int cdrom_get_toc_entry(ide_drive_t *drive, int track,
- struct atapi_toc_entry **ent)
-{
- struct cdrom_info *info = drive->driver_data;
- struct atapi_toc *toc = info->toc;
- int ntracks;
-
- /*
- * don't serve cached data, if the toc isn't valid
- */
- if (!CDROM_STATE_FLAGS(drive)->toc_valid)
- return -EINVAL;
-
- /* Check validity of requested track number. */
- ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
- if (toc->hdr.first_track == CDROM_LEADOUT) ntracks = 0;
- if (track == CDROM_LEADOUT)
- *ent = &toc->ent[ntracks];
- else if (track < toc->hdr.first_track ||
- track > toc->hdr.last_track)
- return -EINVAL;
- else
- *ent = &toc->ent[track - toc->hdr.first_track];
-
- return 0;
-}
-
-/* the generic packet interface to cdrom.c */
-static int ide_cdrom_packet(struct cdrom_device_info *cdi,
- struct packet_command *cgc)
-{
- struct request req;
- ide_drive_t *drive = cdi->handle;
-
- if (cgc->timeout <= 0)
- cgc->timeout = ATAPI_WAIT_PC;
-
- /* here we queue the commands from the uniform CD-ROM
- layer. the packet must be complete, as we do not
- touch it at all. */
- cdrom_prepare_request(drive, &req);
- memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
- if (cgc->sense)
- memset(cgc->sense, 0, sizeof(struct request_sense));
- req.data = cgc->buffer;
- req.data_len = cgc->buflen;
- req.timeout = cgc->timeout;
-
- if (cgc->quiet)
- req.flags |= REQ_QUIET;
-
- req.sense = cgc->sense;
- cgc->stat = cdrom_queue_packet_command(drive, &req);
- if (!cgc->stat)
- cgc->buflen -= req.data_len;
- return cgc->stat;
-}
-
-static
-int ide_cdrom_dev_ioctl (struct cdrom_device_info *cdi,
- unsigned int cmd, unsigned long arg)
-{
- struct packet_command cgc;
- char buffer[16];
- int stat;
-
- init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
-
- /* These will be moved into the Uniform layer shortly... */
- switch (cmd) {
- case CDROMSETSPINDOWN: {
- char spindown;
-
- if (copy_from_user(&spindown, (void __user *) arg, sizeof(char)))
- return -EFAULT;
-
- if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
- return stat;
-
- buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
-
- return cdrom_mode_select(cdi, &cgc);
- }
-
- case CDROMGETSPINDOWN: {
- char spindown;
-
- if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
- return stat;
-
- spindown = buffer[11] & 0x0f;
-
- if (copy_to_user((void __user *) arg, &spindown, sizeof (char)))
- return -EFAULT;
-
- return 0;
- }
-
- default:
- return -EINVAL;
- }
-
-}
-
-static
-int ide_cdrom_audio_ioctl (struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg)
-
-{
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *info = drive->driver_data;
- int stat;
-
- switch (cmd) {
- /*
- * emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
- * atapi doesn't support it
- */
- case CDROMPLAYTRKIND: {
- unsigned long lba_start, lba_end;
- struct cdrom_ti *ti = arg;
- struct atapi_toc_entry *first_toc, *last_toc;
-
- stat = cdrom_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
- if (stat)
- return stat;
-
- stat = cdrom_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
- if (stat)
- return stat;
-
- if (ti->cdti_trk1 != CDROM_LEADOUT)
- ++last_toc;
- lba_start = first_toc->addr.lba;
- lba_end = last_toc->addr.lba;
-
- if (lba_end <= lba_start)
- return -EINVAL;
-
- return cdrom_play_audio(drive, lba_start, lba_end);
- }
-
- case CDROMREADTOCHDR: {
- struct cdrom_tochdr *tochdr = arg;
- struct atapi_toc *toc;
-
- /* Make sure our saved TOC is valid. */
- stat = cdrom_read_toc(drive, NULL);
- if (stat)
- return stat;
-
- toc = info->toc;
- tochdr->cdth_trk0 = toc->hdr.first_track;
- tochdr->cdth_trk1 = toc->hdr.last_track;
-
- return 0;
- }
-
- case CDROMREADTOCENTRY: {
- struct cdrom_tocentry *tocentry = arg;
- struct atapi_toc_entry *toce;
-
- stat = cdrom_get_toc_entry(drive, tocentry->cdte_track, &toce);
- if (stat)
- return stat;
-
- tocentry->cdte_ctrl = toce->control;
- tocentry->cdte_adr = toce->adr;
- if (tocentry->cdte_format == CDROM_MSF) {
- lba_to_msf (toce->addr.lba,
- &tocentry->cdte_addr.msf.minute,
- &tocentry->cdte_addr.msf.second,
- &tocentry->cdte_addr.msf.frame);
- } else
- tocentry->cdte_addr.lba = toce->addr.lba;
-
- return 0;
- }
-
- default:
- return -EINVAL;
- }
-}
-
-static
-int ide_cdrom_reset (struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
- struct request req;
- int ret;
-
- cdrom_prepare_request(drive, &req);
- req.flags = REQ_SPECIAL | REQ_QUIET;
- ret = ide_do_drive_cmd(drive, &req, ide_wait);
-
- /*
- * A reset will unlock the door. If it was previously locked,
- * lock it again.
- */
- if (CDROM_STATE_FLAGS(drive)->door_locked)
- (void) cdrom_lockdoor(drive, 1, &sense);
-
- return ret;
-}
-
-
-static
-int ide_cdrom_tray_move (struct cdrom_device_info *cdi, int position)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
-
- if (position) {
- int stat = cdrom_lockdoor(drive, 0, &sense);
+ (char *)&toc->hdr,
+ sizeof(struct atapi_toc_header) +
+ (ntracks + 1) *
+ sizeof(struct atapi_toc_entry),
+ sense);
if (stat)
return stat;
+
+ if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ } else {
+ toc->hdr.first_track = CDROM_LEADOUT;
+ toc->hdr.last_track = CDROM_LEADOUT;
+ }
}
- return cdrom_eject(drive, !position, &sense);
-}
+ if (stat)
+ return stat;
-static
-int ide_cdrom_lock_door (struct cdrom_device_info *cdi, int lock)
-{
- ide_drive_t *drive = cdi->handle;
- return cdrom_lockdoor(drive, lock, NULL);
-}
+ toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
-static
-int ide_cdrom_get_capabilities(ide_drive_t *drive, struct atapi_capabilities_page *cap)
-{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
- struct packet_command cgc;
- int stat, attempts = 3, size = sizeof(*cap);
+ if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
+ toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
+ }
- /*
- * ACER50 (and others?) require the full spec length mode sense
- * page capabilities size, but older drives break.
- */
- if (!(!strcmp(drive->id->model, "ATAPI CD ROM DRIVE 50X MAX") ||
- !strcmp(drive->id->model, "WPI CDS-32X")))
- size -= sizeof(cap->pad);
+ for (i = 0; i <= ntracks; i++) {
+ if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
+ if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
+ toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+ msf_from_bcd(&toc->ent[i].addr.msf);
+ }
+ toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
+ toc->ent[i].addr.msf.second,
+ toc->ent[i].addr.msf.frame);
+ }
- init_cdrom_command(&cgc, cap, size, CGC_DATA_UNKNOWN);
- do { /* we seem to get stat=0x01,err=0x00 the first time (??) */
- stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
- if (!stat)
- break;
- } while (--attempts);
- return stat;
-}
+ if (toc->hdr.first_track != CDROM_LEADOUT) {
+ /* read the multisession information */
+ stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
+ sizeof(ms_tmp), sense);
+ if (stat)
+ return stat;
-static
-void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page *cap)
-{
- /* The ACER/AOpen 24X cdrom has the speed fields byte-swapped */
- if (!drive->id->model[0] &&
- !strncmp(drive->id->fw_rev, "241N", 4)) {
- CDROM_STATE_FLAGS(drive)->current_speed =
- (((unsigned int)cap->curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS(drive)->max_speed =
- (((unsigned int)cap->maxspeed) + (176/2)) / 176;
+ toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
} else {
- CDROM_STATE_FLAGS(drive)->current_speed =
- (ntohs(cap->curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS(drive)->max_speed =
- (ntohs(cap->maxspeed) + (176/2)) / 176;
+ ms_tmp.hdr.last_track = CDROM_LEADOUT;
+ ms_tmp.hdr.first_track = ms_tmp.hdr.last_track;
+ toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
}
-}
-static
-int ide_cdrom_select_speed (struct cdrom_device_info *cdi, int speed)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
- struct atapi_capabilities_page cap;
- int stat;
-
- if ((stat = cdrom_select_speed(drive, speed, &sense)) < 0)
- return stat;
+ if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
+ /* re-read multisession information using MSF format */
+ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
+ sizeof(ms_tmp), sense);
+ if (stat)
+ return stat;
- if (!ide_cdrom_get_capabilities(drive, &cap)) {
- ide_cdrom_update_speed(drive, &cap);
- cdi->speed = CDROM_STATE_FLAGS(drive)->current_speed;
+ msf_from_bcd(&ms_tmp.ent.addr.msf);
+ toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
+ ms_tmp.ent.addr.msf.second,
+ ms_tmp.ent.addr.msf.frame);
}
- return 0;
-}
-
-/*
- * add logic to try GET_EVENT command first to check for media and tray
- * status. this should be supported by newer cd-r/w and all DVD etc
- * drives
- */
-static
-int ide_cdrom_drive_status (struct cdrom_device_info *cdi, int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- struct media_event_desc med;
- struct request_sense sense;
- int stat;
- if (slot_nr != CDSL_CURRENT)
- return -EINVAL;
-
- stat = cdrom_check_status(drive, &sense);
- if (!stat || sense.sense_key == UNIT_ATTENTION)
- return CDS_DISC_OK;
+ toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
- if (!cdrom_get_media_event(cdi, &med)) {
- if (med.media_present)
- return CDS_DISC_OK;
- else if (med.door_open)
- return CDS_TRAY_OPEN;
- else
- return CDS_NO_DISC;
+ /* now try to get the total cdrom capacity */
+ stat = cdrom_get_last_written(cdi, &last_written);
+ if (!stat && (last_written > toc->capacity)) {
+ toc->capacity = last_written;
+ set_capacity(info->disk, toc->capacity * sectors_per_frame);
+ drive->probed_capacity = toc->capacity * sectors_per_frame;
}
- if (sense.sense_key == NOT_READY && sense.asc == 0x04 && sense.ascq == 0x04)
- return CDS_DISC_OK;
-
- /*
- * If not using Mt Fuji extended media tray reports,
- * just return TRAY_OPEN since ATAPI doesn't provide
- * any other way to detect this...
- */
- if (sense.sense_key == NOT_READY) {
- if (sense.asc == 0x3a) {
- if (sense.ascq == 1)
- return CDS_NO_DISC;
- else if (sense.ascq == 0 || sense.ascq == 2)
- return CDS_TRAY_OPEN;
- }
- }
+ /* Remember that we've read this stuff. */
+ drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
- return CDS_DRIVE_NOT_READY;
+ return 0;
}
-static
-int ide_cdrom_get_last_session (struct cdrom_device_info *cdi,
- struct cdrom_multisession *ms_info)
+int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
{
- struct atapi_toc *toc;
- ide_drive_t *drive = cdi->handle;
struct cdrom_info *info = drive->driver_data;
- struct request_sense sense;
- int ret;
-
- if (!CDROM_STATE_FLAGS(drive)->toc_valid || info->toc == NULL)
- if ((ret = cdrom_read_toc(drive, &sense)))
- return ret;
+ struct cdrom_device_info *cdi = &info->devinfo;
+ struct packet_command cgc;
+ int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
- toc = info->toc;
- ms_info->addr.lba = toc->last_session_lba;
- ms_info->xa_flag = toc->xa_flag;
+ if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
+ size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
- return 0;
+ init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
+ do {
+ /* we seem to get stat=0x01,err=0x00 the first time (??) */
+ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
+ if (!stat)
+ break;
+ } while (--attempts);
+ return stat;
}
-static
-int ide_cdrom_get_mcn (struct cdrom_device_info *cdi,
- struct cdrom_mcn *mcn_info)
+void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
{
- int stat;
- char mcnbuf[24];
- ide_drive_t *drive = cdi->handle;
-
-/* get MCN */
- if ((stat = cdrom_read_subchannel(drive, 2, mcnbuf, sizeof (mcnbuf), NULL)))
- return stat;
-
- memcpy (mcn_info->medium_catalog_number, mcnbuf+9,
- sizeof (mcn_info->medium_catalog_number)-1);
- mcn_info->medium_catalog_number[sizeof (mcn_info->medium_catalog_number)-1]
- = '\0';
-
- return 0;
-}
-
-
-
-/****************************************************************************
- * Other driver requests (open, close, check media change).
- */
+ struct cdrom_info *cd = drive->driver_data;
+ u16 curspeed, maxspeed;
-static
-int ide_cdrom_check_media_change_real (struct cdrom_device_info *cdi,
- int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- int retval;
-
- if (slot_nr == CDSL_CURRENT) {
- (void) cdrom_check_status(drive, NULL);
- retval = CDROM_STATE_FLAGS(drive)->media_changed;
- CDROM_STATE_FLAGS(drive)->media_changed = 0;
- return retval;
+ if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
+ curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
+ maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
} else {
- return -EINVAL;
+ curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
+ maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
}
-}
-
-
-static
-int ide_cdrom_open_real (struct cdrom_device_info *cdi, int purpose)
-{
- return 0;
-}
-
-/*
- * Close down the device. Invalidate all cached blocks.
- */
-
-static
-void ide_cdrom_release_real (struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
- if (!cdi->use_count)
- CDROM_STATE_FLAGS(drive)->toc_valid = 0;
+ cd->current_speed = (curspeed + (176/2)) / 176;
+ cd->max_speed = (maxspeed + (176/2)) / 176;
}
+#define IDE_CD_CAPABILITIES \
+ (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
+ CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
+ CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
+ CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
+ CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
-
-/****************************************************************************
- * Device initialization.
- */
static struct cdrom_device_ops ide_cdrom_dops = {
.open = ide_cdrom_open_real,
.release = ide_cdrom_release_real,
.get_mcn = ide_cdrom_get_mcn,
.reset = ide_cdrom_reset,
.audio_ioctl = ide_cdrom_audio_ioctl,
- .dev_ioctl = ide_cdrom_dev_ioctl,
- .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
- CDC_SELECT_SPEED | CDC_SELECT_DISC |
- CDC_MULTI_SESSION | CDC_MCN |
- CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET |
- CDC_IOCTLS | CDC_DRIVE_STATUS | CDC_CD_R |
- CDC_CD_RW | CDC_DVD | CDC_DVD_R| CDC_DVD_RAM |
- CDC_GENERIC_PACKET | CDC_MO_DRIVE | CDC_MRW |
- CDC_MRW_W | CDC_RAM,
+ .capability = IDE_CD_CAPABILITIES,
.generic_packet = ide_cdrom_packet,
};
-static int ide_cdrom_register (ide_drive_t *drive, int nslots)
+static int ide_cdrom_register(ide_drive_t *drive, int nslots)
{
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *devinfo = &info->devinfo;
devinfo->ops = &ide_cdrom_dops;
- devinfo->mask = 0;
- devinfo->speed = CDROM_STATE_FLAGS(drive)->current_speed;
+ devinfo->speed = info->current_speed;
devinfo->capacity = nslots;
devinfo->handle = drive;
strcpy(devinfo->name, drive->name);
-
- /* set capability mask to match the probe. */
- if (!CDROM_CONFIG_FLAGS(drive)->cd_r)
- devinfo->mask |= CDC_CD_R;
- if (!CDROM_CONFIG_FLAGS(drive)->cd_rw)
- devinfo->mask |= CDC_CD_RW;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd)
- devinfo->mask |= CDC_DVD;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd_r)
- devinfo->mask |= CDC_DVD_R;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd_ram)
- devinfo->mask |= CDC_DVD_RAM;
- if (!CDROM_CONFIG_FLAGS(drive)->is_changer)
- devinfo->mask |= CDC_SELECT_DISC;
- if (!CDROM_CONFIG_FLAGS(drive)->audio_play)
- devinfo->mask |= CDC_PLAY_AUDIO;
- if (!CDROM_CONFIG_FLAGS(drive)->close_tray)
- devinfo->mask |= CDC_CLOSE_TRAY;
- if (!CDROM_CONFIG_FLAGS(drive)->mo_drive)
- devinfo->mask |= CDC_MO_DRIVE;
+
+ if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
+ devinfo->mask |= CDC_SELECT_SPEED;
devinfo->disk = info->disk;
return register_cdrom(devinfo);
}
-static
-int ide_cdrom_probe_capabilities (ide_drive_t *drive)
+static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
- struct atapi_capabilities_page cap;
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_device_info *cdi = &cd->devinfo;
+ u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
+ mechtype_t mechtype;
int nslots = 1;
+ cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
+ CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
+ CDC_MO_DRIVE | CDC_RAM);
+
if (drive->media == ide_optical) {
- CDROM_CONFIG_FLAGS(drive)->mo_drive = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
- printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", drive->name);
+ cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
+ printk(KERN_ERR "%s: ATAPI magneto-optical drive\n",
+ drive->name);
return nslots;
}
- if (CDROM_CONFIG_FLAGS(drive)->nec260 ||
- !strcmp(drive->id->model,"STINGRAY 8422 IDE 8X CD-ROM 7-27-95")) {
- CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
+ if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
+ drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
+ cdi->mask &= ~CDC_PLAY_AUDIO;
return nslots;
}
/*
- * we have to cheat a little here. the packet will eventually
- * be queued with ide_cdrom_packet(), which extracts the
- * drive from cdi->handle. Since this device hasn't been
- * registered with the Uniform layer yet, it can't do this.
- * Same goes for cdi->ops.
+ * We have to cheat a little here. the packet will eventually be queued
+ * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
+ * Since this device hasn't been registered with the Uniform layer yet,
+ * it can't do this. Same goes for cdi->ops.
*/
cdi->handle = drive;
cdi->ops = &ide_cdrom_dops;
- if (ide_cdrom_get_capabilities(drive, &cap))
+ if (ide_cdrom_get_capabilities(drive, buf))
return 0;
- if (cap.lock == 0)
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
- if (cap.eject)
- CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
- if (cap.cd_r_write)
- CDROM_CONFIG_FLAGS(drive)->cd_r = 1;
- if (cap.cd_rw_write) {
- CDROM_CONFIG_FLAGS(drive)->cd_rw = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
- }
- if (cap.test_write)
- CDROM_CONFIG_FLAGS(drive)->test_write = 1;
- if (cap.dvd_ram_read || cap.dvd_r_read || cap.dvd_rom)
- CDROM_CONFIG_FLAGS(drive)->dvd = 1;
- if (cap.dvd_ram_write) {
- CDROM_CONFIG_FLAGS(drive)->dvd_ram = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
- }
- if (cap.dvd_r_write)
- CDROM_CONFIG_FLAGS(drive)->dvd_r = 1;
- if (cap.audio_play)
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
- if (cap.mechtype == mechtype_caddy || cap.mechtype == mechtype_popup)
- CDROM_CONFIG_FLAGS(drive)->close_tray = 0;
-
- /* Some drives used by Apple don't advertise audio play
- * but they do support reading TOC & audio datas
- */
- if (strcmp(drive->id->model, "MATSHITADVD-ROM SR-8187") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8186") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8176") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8174") == 0)
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
+ if ((buf[8 + 6] & 0x01) == 0)
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+ if (buf[8 + 6] & 0x08)
+ drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
+ if (buf[8 + 3] & 0x01)
+ cdi->mask &= ~CDC_CD_R;
+ if (buf[8 + 3] & 0x02)
+ cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
+ if (buf[8 + 2] & 0x38)
+ cdi->mask &= ~CDC_DVD;
+ if (buf[8 + 3] & 0x20)
+ cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
+ if (buf[8 + 3] & 0x10)
+ cdi->mask &= ~CDC_DVD_R;
+ if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
+ cdi->mask &= ~CDC_PLAY_AUDIO;
+
+ mechtype = buf[8 + 6] >> 5;
+ if (mechtype == mechtype_caddy || mechtype == mechtype_popup)
+ cdi->mask |= CDC_CLOSE_TRAY;
-#if ! STANDARD_ATAPI
if (cdi->sanyo_slot > 0) {
- CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
+ cdi->mask &= ~CDC_SELECT_DISC;
nslots = 3;
+ } else if (mechtype == mechtype_individual_changer ||
+ mechtype == mechtype_cartridge_changer) {
+ nslots = cdrom_number_of_slots(cdi);
+ if (nslots > 1)
+ cdi->mask &= ~CDC_SELECT_DISC;
}
- else
-#endif /* not STANDARD_ATAPI */
- if (cap.mechtype == mechtype_individual_changer ||
- cap.mechtype == mechtype_cartridge_changer) {
- if ((nslots = cdrom_number_of_slots(cdi)) > 1) {
- CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
- CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 1;
- }
- }
+ ide_cdrom_update_speed(drive, buf);
- ide_cdrom_update_speed(drive, &cap);
- /* don't print speed if the drive reported 0.
- */
printk(KERN_INFO "%s: ATAPI", drive->name);
- if (CDROM_CONFIG_FLAGS(drive)->max_speed)
- printk(" %dX", CDROM_CONFIG_FLAGS(drive)->max_speed);
- printk(" %s", CDROM_CONFIG_FLAGS(drive)->dvd ? "DVD-ROM" : "CD-ROM");
- if (CDROM_CONFIG_FLAGS(drive)->dvd_r|CDROM_CONFIG_FLAGS(drive)->dvd_ram)
- printk(" DVD%s%s",
- (CDROM_CONFIG_FLAGS(drive)->dvd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS(drive)->dvd_ram)? "-RAM" : "");
+ /* don't print speed if the drive reported 0 */
+ if (cd->max_speed)
+ printk(KERN_CONT " %dX", cd->max_speed);
- if (CDROM_CONFIG_FLAGS(drive)->cd_r|CDROM_CONFIG_FLAGS(drive)->cd_rw)
- printk(" CD%s%s",
- (CDROM_CONFIG_FLAGS(drive)->cd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS(drive)->cd_rw)? "/RW" : "");
+ printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
- if (CDROM_CONFIG_FLAGS(drive)->is_changer)
- printk(" changer w/%d slots", nslots);
- else
- printk(" drive");
+ if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
+ printk(KERN_CONT " DVD%s%s",
+ (cdi->mask & CDC_DVD_R) ? "" : "-R",
+ (cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
- printk(", %dkB Cache", be16_to_cpu(cap.buffer_size));
+ if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
+ printk(KERN_CONT " CD%s%s",
+ (cdi->mask & CDC_CD_R) ? "" : "-R",
+ (cdi->mask & CDC_CD_RW) ? "" : "/RW");
- if (drive->using_dma)
- ide_dma_verbose(drive);
+ if ((cdi->mask & CDC_SELECT_DISC) == 0)
+ printk(KERN_CONT " changer w/%d slots", nslots);
+ else
+ printk(KERN_CONT " drive");
- printk("\n");
+ printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
return nslots;
}
-static void ide_cdrom_add_settings(ide_drive_t *drive)
-{
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
-}
-
-/*
- * standard prep_rq_fn that builds 10 byte cmds
- */
-static int ide_cdrom_prep_fs(request_queue_t *q, struct request *rq)
+/* standard prep_rq_fn that builds 10 byte cmds */
+static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
{
int hard_sect = queue_hardsect_size(q);
long block = (long)rq->hard_sector / (hard_sect >> 9);
unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
- memset(rq->cmd, 0, sizeof(rq->cmd));
+ memset(rq->cmd, 0, BLK_MAX_CDB);
if (rq_data_dir(rq) == READ)
rq->cmd[0] = GPCMD_READ_10;
{
u8 *c = rq->cmd;
- /*
- * Transform 6-byte read/write commands to the 10-byte version
- */
+ /* transform 6-byte read/write commands to the 10-byte version */
if (c[0] == READ_6 || c[0] == WRITE_6) {
c[8] = c[4];
c[5] = c[3];
rq->errors = ILLEGAL_REQUEST;
return BLKPREP_KILL;
}
-
+
return BLKPREP_OK;
}
-static int ide_cdrom_prep_fn(request_queue_t *q, struct request *rq)
+static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
{
- if (rq->flags & REQ_CMD)
+ if (blk_fs_request(rq))
return ide_cdrom_prep_fs(q, rq);
- else if (rq->flags & REQ_BLOCK_PC)
+ else if (blk_pc_request(rq))
return ide_cdrom_prep_pc(rq);
return 0;
}
-static
-int ide_cdrom_setup (ide_drive_t *drive)
+struct cd_list_entry {
+ const char *id_model;
+ const char *id_firmware;
+ unsigned int cd_flags;
+};
+
+#ifdef CONFIG_IDE_PROC_FS
+static sector_t ide_cdrom_capacity(ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
+ unsigned long capacity, sectors_per_frame;
+
+ if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
+ return 0;
+
+ return capacity * sectors_per_frame;
+}
+
+static int proc_idecd_read_capacity(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ ide_drive_t *drive = data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive));
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static ide_proc_entry_t idecd_proc[] = {
+ { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+static void ide_cdrom_add_settings(ide_drive_t *drive)
+{
+ ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
+ &drive->dsc_overlap, NULL);
+}
+#else
+static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
+#endif
+
+static const struct cd_list_entry ide_cd_quirks_list[] = {
+ /* Limit transfer size per interrupt. */
+ { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_AFLAG_LIMIT_NFRAMES },
+ { "SAMSUNG CD-ROM SCR-2432", NULL, IDE_AFLAG_LIMIT_NFRAMES },
+ /* SCR-3231 doesn't support the SET_CD_SPEED command. */
+ { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT },
+ /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
+ { "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
+ IDE_AFLAG_PRE_ATAPI12, },
+ /* Vertos 300, some versions of this drive like to talk BCD. */
+ { "V003S0DS", NULL, IDE_AFLAG_VERTOS_300_SSD, },
+ /* Vertos 600 ESD. */
+ { "V006E0DS", NULL, IDE_AFLAG_VERTOS_600_ESD, },
+ /*
+ * Sanyo 3 CD changer uses a non-standard command for CD changing
+ * (by default standard ATAPI support for CD changers is used).
+ */
+ { "CD-ROM CDR-C3 G", NULL, IDE_AFLAG_SANYO_3CD },
+ { "CD-ROM CDR-C3G", NULL, IDE_AFLAG_SANYO_3CD },
+ { "CD-ROM CDR_C36", NULL, IDE_AFLAG_SANYO_3CD },
+ /* Stingray 8X CD-ROM. */
+ { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
+ /*
+ * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
+ * mode sense page capabilities size, but older drives break.
+ */
+ { "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
+ { "WPI CDS-32X", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
+ /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
+ { "", "241N", IDE_AFLAG_LE_SPEED_FIELDS },
+ /*
+ * Some drives used by Apple don't advertise audio play
+ * but they do support reading TOC & audio datas.
+ */
+ { "MATSHITADVD-ROM SR-8187", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8186", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { NULL, NULL, 0 }
+};
+
+static unsigned int ide_cd_flags(struct hd_driveid *id)
+{
+ const struct cd_list_entry *cle = ide_cd_quirks_list;
+
+ while (cle->id_model) {
+ if (strcmp(cle->id_model, id->model) == 0 &&
+ (cle->id_firmware == NULL ||
+ strstr(id->fw_rev, cle->id_firmware)))
+ return cle->cd_flags;
+ cle++;
+ }
+
+ return 0;
+}
+
+static int ide_cdrom_setup(ide_drive_t *drive)
+{
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_device_info *cdi = &cd->devinfo;
+ struct hd_driveid *id = drive->id;
int nslots;
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
blk_queue_dma_alignment(drive->queue, 31);
+ blk_queue_update_dma_pad(drive->queue, 15);
drive->queue->unplug_delay = (1 * HZ) / 1000;
if (!drive->queue->unplug_delay)
drive->queue->unplug_delay = 1;
drive->special.all = 0;
- CDROM_STATE_FLAGS(drive)->media_changed = 1;
- CDROM_STATE_FLAGS(drive)->toc_valid = 0;
- CDROM_STATE_FLAGS(drive)->door_locked = 0;
+ drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
+ ide_cd_flags(id);
-#if NO_DOOR_LOCKING
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
-#else
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 0;
-#endif
+ if ((id->config & 0x0060) == 0x20)
+ drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
- CDROM_CONFIG_FLAGS(drive)->drq_interrupt = ((drive->id->config & 0x0060) == 0x20);
- CDROM_CONFIG_FLAGS(drive)->is_changer = 0;
- CDROM_CONFIG_FLAGS(drive)->cd_r = 0;
- CDROM_CONFIG_FLAGS(drive)->cd_rw = 0;
- CDROM_CONFIG_FLAGS(drive)->test_write = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd_r = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd_ram = 0;
- CDROM_CONFIG_FLAGS(drive)->no_eject = 1;
- CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 0;
- CDROM_CONFIG_FLAGS(drive)->audio_play = 0;
- CDROM_CONFIG_FLAGS(drive)->close_tray = 1;
-
- /* limit transfer size per interrupt. */
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 0;
- /* a testament to the nice quality of Samsung drives... */
- if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430"))
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2432"))
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- /* the 3231 model does not support the SET_CD_SPEED command */
- else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
- cdi->mask |= CDC_SELECT_SPEED;
-
-#if ! STANDARD_ATAPI
- /* by default Sanyo 3 CD changer support is turned off and
- ATAPI Rev 2.2+ standard support for CD changers is used */
- cdi->sanyo_slot = 0;
-
- CDROM_CONFIG_FLAGS(drive)->nec260 = 0;
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 0;
-
- if (strcmp (drive->id->model, "V003S0DS") == 0 &&
- drive->id->fw_rev[4] == '1' &&
- drive->id->fw_rev[6] <= '2') {
- /* Vertos 300.
- Some versions of this drive like to talk BCD. */
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- }
+ if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
+ id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
+ IDE_AFLAG_TOCADDR_AS_BCD);
+ else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
+ id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
+ else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
+ /* 3 => use CD in slot 0 */
+ cdi->sanyo_slot = 3;
- else if (strcmp (drive->id->model, "V006E0DS") == 0 &&
- drive->id->fw_rev[4] == '1' &&
- drive->id->fw_rev[6] <= '2') {
- /* Vertos 600 ESD. */
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
- }
- else if (strcmp(drive->id->model, "NEC CD-ROM DRIVE:260") == 0 &&
- strncmp(drive->id->fw_rev, "1.01", 4) == 0) { /* FIXME */
- /* Old NEC260 (not R).
- This drive was released before the 1.2 version
- of the spec. */
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->nec260 = 1;
- }
- else if (strcmp(drive->id->model, "WEARNES CDD-120") == 0 &&
- strncmp(drive->id->fw_rev, "A1.1", 4) == 0) { /* FIXME */
- /* Wearnes */
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- }
- /* Sanyo 3 CD changer uses a non-standard command
- for CD changing */
- else if ((strcmp(drive->id->model, "CD-ROM CDR-C3 G") == 0) ||
- (strcmp(drive->id->model, "CD-ROM CDR-C3G") == 0) ||
- (strcmp(drive->id->model, "CD-ROM CDR_C36") == 0)) {
- /* uses CD in slot 0 when value is set to 3 */
- cdi->sanyo_slot = 3;
- }
-#endif /* not STANDARD_ATAPI */
-
- info->toc = NULL;
- info->buffer = NULL;
- info->sector_buffered = 0;
- info->nsectors_buffered = 0;
- info->changer_info = NULL;
- info->last_block = 0;
- info->start_seek = 0;
-
- nslots = ide_cdrom_probe_capabilities (drive);
+ nslots = ide_cdrom_probe_capabilities(drive);
- /*
- * set correct block size
- */
+ /* set correct block size */
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
- if (drive->autotune == IDE_TUNE_DEFAULT ||
- drive->autotune == IDE_TUNE_AUTO)
- drive->dsc_overlap = (drive->next != drive);
-#if 0
- drive->dsc_overlap = (HWIF(drive)->no_dsc) ? 0 : 1;
- if (HWIF(drive)->no_dsc) {
- printk(KERN_INFO "ide-cd: %s: disabling DSC overlap\n",
- drive->name);
- drive->dsc_overlap = 0;
- }
-#endif
+ drive->dsc_overlap = (drive->next != drive);
if (ide_cdrom_register(drive, nslots)) {
- printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name);
- info->devinfo.handle = NULL;
+ printk(KERN_ERR "%s: %s failed to register device with the"
+ " cdrom driver.\n", drive->name, __func__);
+ cd->devinfo.handle = NULL;
return 1;
}
ide_cdrom_add_settings(drive);
return 0;
}
-#ifdef CONFIG_PROC_FS
-static
-sector_t ide_cdrom_capacity (ide_drive_t *drive)
-{
- unsigned long capacity, sectors_per_frame;
-
- if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
- return 0;
-
- return capacity * sectors_per_frame;
-}
-#endif
-
-static int ide_cd_remove(struct device *dev)
+static void ide_cd_remove(ide_drive_t *drive)
{
- ide_drive_t *drive = to_ide_device(dev);
struct cdrom_info *info = drive->driver_data;
- ide_unregister_subdriver(drive, info->driver);
+ ide_proc_unregister_driver(drive, info->driver);
del_gendisk(info->disk);
ide_cd_put(info);
-
- return 0;
}
static void ide_cd_release(struct kref *kref)
ide_drive_t *drive = info->drive;
struct gendisk *g = info->disk;
- if (info->buffer != NULL)
- kfree(info->buffer);
- if (info->toc != NULL)
- kfree(info->toc);
- if (info->changer_info != NULL)
- kfree(info->changer_info);
- if (devinfo->handle == drive && unregister_cdrom(devinfo))
- printk(KERN_ERR "%s: %s failed to unregister device from the cdrom "
- "driver.\n", __FUNCTION__, drive->name);
+ kfree(info->toc);
+ if (devinfo->handle == drive)
+ unregister_cdrom(devinfo);
drive->dsc_overlap = 0;
drive->driver_data = NULL;
blk_queue_prep_rq(drive->queue, NULL);
kfree(info);
}
-static int ide_cd_probe(struct device *);
-
-#ifdef CONFIG_PROC_FS
-static int proc_idecd_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = data;
- int len;
-
- len = sprintf(page,"%llu\n", (long long)ide_cdrom_capacity(drive));
- PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
-}
-
-static ide_proc_entry_t idecd_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
- { NULL, 0, NULL, NULL }
-};
-#else
-# define idecd_proc NULL
-#endif
+static int ide_cd_probe(ide_drive_t *);
static ide_driver_t ide_cdrom_driver = {
- .owner = THIS_MODULE,
.gen_driver = {
+ .owner = THIS_MODULE,
.name = "ide-cdrom",
.bus = &ide_bus_type,
- .probe = ide_cd_probe,
- .remove = ide_cd_remove,
},
+ .probe = ide_cd_probe,
+ .remove = ide_cd_remove,
.version = IDECD_VERSION,
.media = ide_cdrom,
.supports_dsc_overlap = 1,
- .do_request = ide_do_rw_cdrom,
+ .do_request = ide_cd_do_request,
.end_request = ide_end_request,
.error = __ide_error,
- .abort = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
.proc = idecd_proc,
+#endif
};
-static int idecd_open(struct inode * inode, struct file * file)
+static int idecd_open(struct inode *inode, struct file *file)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct cdrom_info *info;
- ide_drive_t *drive;
int rc = -ENOMEM;
- if (!(info = ide_cd_get(disk)))
+ info = ide_cd_get(disk);
+ if (!info)
return -ENXIO;
- drive = info->drive;
-
- drive->usage++;
-
- if (!info->buffer)
- info->buffer = kmalloc(SECTOR_BUFFER_SIZE,
- GFP_KERNEL|__GFP_REPEAT);
- if (!info->buffer || (rc = cdrom_open(&info->devinfo, inode, file)))
- drive->usage--;
+ rc = cdrom_open(&info->devinfo, inode, file);
if (rc < 0)
ide_cd_put(info);
return rc;
}
-static int idecd_release(struct inode * inode, struct file * file)
+static int idecd_release(struct inode *inode, struct file *file)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct cdrom_info *info = ide_cd_g(disk);
- ide_drive_t *drive = info->drive;
- cdrom_release (&info->devinfo, file);
- drive->usage--;
+ cdrom_release(&info->devinfo, file);
ide_cd_put(info);
return 0;
}
-static int idecd_ioctl (struct inode *inode, struct file *file,
+static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg)
+{
+ struct packet_command cgc;
+ char buffer[16];
+ int stat;
+ char spindown;
+
+ if (copy_from_user(&spindown, (void __user *)arg, sizeof(char)))
+ return -EFAULT;
+
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
+
+ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
+ if (stat)
+ return stat;
+
+ buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
+ return cdrom_mode_select(cdi, &cgc);
+}
+
+static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
+{
+ struct packet_command cgc;
+ char buffer[16];
+ int stat;
+ char spindown;
+
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
+
+ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
+ if (stat)
+ return stat;
+
+ spindown = buffer[11] & 0x0f;
+ if (copy_to_user((void __user *)arg, &spindown, sizeof(char)))
+ return -EFAULT;
+ return 0;
+}
+
+static int idecd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
int err;
- err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
+ switch (cmd) {
+ case CDROMSETSPINDOWN:
+ return idecd_set_spindown(&info->devinfo, arg);
+ case CDROMGETSPINDOWN:
+ return idecd_get_spindown(&info->devinfo, arg);
+ default:
+ break;
+ }
+
+ err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
if (err == -EINVAL)
err = cdrom_ioctl(file, &info->devinfo, inode, cmd, arg);
{
struct cdrom_info *info = ide_cd_g(disk);
struct request_sense sense;
- cdrom_read_toc(info->drive, &sense);
+
+ ide_cd_read_toc(info->drive, &sense);
+
return 0;
}
static struct block_device_operations idecd_ops = {
- .owner = THIS_MODULE,
- .open = idecd_open,
- .release = idecd_release,
- .ioctl = idecd_ioctl,
- .media_changed = idecd_media_changed,
- .revalidate_disk= idecd_revalidate_disk
+ .owner = THIS_MODULE,
+ .open = idecd_open,
+ .release = idecd_release,
+ .ioctl = idecd_ioctl,
+ .media_changed = idecd_media_changed,
+ .revalidate_disk = idecd_revalidate_disk
};
-/* options */
-static char *ignore = NULL;
+/* module options */
+static char *ignore;
module_param(ignore, charp, 0400);
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
-static int ide_cd_probe(struct device *dev)
+static int ide_cd_probe(ide_drive_t *drive)
{
- ide_drive_t *drive = to_ide_device(dev);
struct cdrom_info *info;
struct gendisk *g;
struct request_sense sense;
/* skip drives that we were told to ignore */
if (ignore != NULL) {
if (strstr(ignore, drive->name)) {
- printk(KERN_INFO "ide-cd: ignoring drive %s\n", drive->name);
+ printk(KERN_INFO "ide-cd: ignoring drive %s\n",
+ drive->name);
goto failed;
}
}
- if (drive->scsi) {
- printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n", drive->name);
- goto failed;
- }
- info = kmalloc(sizeof(struct cdrom_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {
- printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", drive->name);
+ printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
+ drive->name);
goto failed;
}
ide_init_disk(g, drive);
- ide_register_subdriver(drive, &ide_cdrom_driver);
-
- memset(info, 0, sizeof (struct cdrom_info));
+ ide_proc_register_driver(drive, &ide_cdrom_driver);
kref_init(&info->kref);
drive->driver_data = info;
g->minors = 1;
- snprintf(g->devfs_name, sizeof(g->devfs_name),
- "%s/cd", drive->devfs_name);
g->driverfs_dev = &drive->gendev;
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
- struct cdrom_device_info *devinfo = &info->devinfo;
- ide_unregister_subdriver(drive, &ide_cdrom_driver);
- if (info->buffer != NULL)
- kfree(info->buffer);
- if (info->toc != NULL)
- kfree(info->toc);
- if (info->changer_info != NULL)
- kfree(info->changer_info);
- if (devinfo->handle == drive && unregister_cdrom(devinfo))
- printk (KERN_ERR "%s: ide_cdrom_cleanup failed to unregister device from the cdrom driver.\n", drive->name);
- kfree(info);
- drive->driver_data = NULL;
+ ide_proc_unregister_driver(drive, &ide_cdrom_driver);
+ ide_cd_release(&info->kref);
goto failed;
}
- cdrom_read_toc(drive, &sense);
+ ide_cd_read_toc(drive, &sense);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
{
driver_unregister(&ide_cdrom_driver.gen_driver);
}
-
-static int ide_cdrom_init(void)
+
+static int __init ide_cdrom_init(void)
{
return driver_register(&ide_cdrom_driver.gen_driver);
}
+MODULE_ALIAS("ide:*m-cdrom*");
+MODULE_ALIAS("ide-cd");
module_init(ide_cdrom_init);
module_exit(ide_cdrom_exit);
MODULE_LICENSE("GPL");