tx493xide: use ->pio_mode value to determine pair device speed

[safe/jmp/linux-2.6] / drivers / ide / gayle.c

diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index 71db2f9..b9e517d 100644 (file)
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
      *  Check and acknowledge the interrupt status
      */
 
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+static int gayle_test_irq(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -76,21 +76,16 @@ static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
     return 1;
 }
 
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+static void gayle_a1200_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
+    ide_hwif_t *hwif = drive->hwif;
 
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-       return 0;
     (void)z_readb(hwif->io_ports.status_addr);
     z_writeb(0x7c, hwif->io_ports.irq_addr);
-    return 1;
 }
 
-static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
-                                    unsigned long ctl, unsigned long irq_port,
-                                    ide_ack_intr_t *ack_intr)
+static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
+                                    unsigned long ctl, unsigned long irq_port)
 {
        int i;
 
@@ -105,9 +100,17 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
        hw->io_ports.irq_addr = irq_port;
 
        hw->irq = IRQ_AMIGA_PORTS;
-       hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops gayle_a4000_port_ops = {
+       .test_irq               = gayle_test_irq,
+};
+
+static const struct ide_port_ops gayle_a1200_port_ops = {
+       .clear_irq              = gayle_a1200_clear_irq,
+       .test_irq               = gayle_test_irq,
+};
+
 static const struct ide_port_info gayle_port_info = {
        .host_flags             = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
                                  IDE_HFLAG_NO_DMA,
@@ -123,9 +126,9 @@ static int __init gayle_init(void)
 {
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
-    ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
-    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+    struct ide_port_info d = gayle_port_info;
 
     if (!MACH_IS_AMIGA)
        return -ENODEV;
@@ -148,11 +151,11 @@ found:
        if (a4000) {
            phys_base = GAYLE_BASE_4000;
            irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-           ack_intr = gayle_ack_intr_a4000;
+           d.port_ops = &gayle_a4000_port_ops;
        } else {
            phys_base = GAYLE_BASE_1200;
            irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-           ack_intr = gayle_ack_intr_a1200;
+           d.port_ops = &gayle_a1200_port_ops;
        }
 
        res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
@@ -165,12 +168,12 @@ found:
        base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
        ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-       gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+       gayle_setup_ports(&hw[i], base, ctrlport, irqport);
 
        hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, NULL);
+    rc = ide_host_add(&d, hws, i, NULL);
     if (rc)
        release_mem_region(res_start, res_n);