/* ----- global defines ----------------------------------------------- */
#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan; /* have a look at what's hanging 'round */
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-
static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
unsigned short flags, char read_write,
/* -----exported algorithm data: ------------------------------------- */
-static struct i2c_algorithm i2c_sibyte_algo = {
+static const struct i2c_algorithm i2c_sibyte_algo = {
.smbus_xfer = smbus_xfer,
.functionality = bit_func,
};
/*
* registering functions to load algorithms at runtime
*/
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
{
- int i;
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
- /* register new adapter to i2c module... */
+ /* Register new adapter to i2c module... */
i2c_adap->algo = &i2c_sibyte_algo;
- /* Set the frequency to 100 kHz */
+ /* Set the requested frequency. */
csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
- return i2c_add_adapter(i2c_adap);
+ return i2c_add_numbered_adapter(i2c_adap);
}
static struct i2c_adapter sibyte_board_adapter[2] = {
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[0],
+ .nr = 0,
.name = "SiByte SMBus 0",
},
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[1],
+ .nr = 1,
.name = "SiByte SMBus 1",
},
};
static int __init i2c_sibyte_init(void)
{
- printk("i2c-swarm.o: i2c SMBus adapter module for SiByte board\n");
+ pr_info("i2c-sibyte: i2c SMBus adapter module for SiByte board\n");
if (i2c_sibyte_add_bus(&sibyte_board_adapter[0], K_SMB_FREQ_100KHZ) < 0)
return -ENODEV;
- if (i2c_sibyte_add_bus(&sibyte_board_adapter[1], K_SMB_FREQ_400KHZ) < 0)
+ if (i2c_sibyte_add_bus(&sibyte_board_adapter[1],
+ K_SMB_FREQ_400KHZ) < 0) {
+ i2c_del_adapter(&sibyte_board_adapter[0]);
return -ENODEV;
+ }
return 0;
}
static void __exit i2c_sibyte_exit(void)
{
- i2c_del_bus(&sibyte_board_adapter[0]);
- i2c_del_bus(&sibyte_board_adapter[1]);
+ i2c_del_adapter(&sibyte_board_adapter[0]);
+ i2c_del_adapter(&sibyte_board_adapter[1]);
}
module_init(i2c_sibyte_init);