#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include "i2c-iop3xx.h"
if (msg->flags & I2C_M_RD)
addr |= 1;
- /*
- * Read or Write?
- */
- if (msg->flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
-
return addr;
}
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
-#ifdef CONFIG_PLAT_IOP
+#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
* Then it passes the SR flags of interest to BH via adap data
*/
static irqreturn_t
-iop3xx_i2c_irq_handler(int this_irq, void *dev_id, struct pt_regs *regs)
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
return im;
}
-static int
-iop3xx_i2c_algo_control(struct i2c_adapter *adapter, unsigned int cmd,
- unsigned long arg)
-{
- return 0;
-}
-
static u32
iop3xx_i2c_func(struct i2c_adapter *adap)
{
static const struct i2c_algorithm iop3xx_i2c_algo = {
.master_xfer = iop3xx_i2c_master_xfer,
- .algo_control = iop3xx_i2c_algo_control,
.functionality = iop3xx_i2c_func,
};
}
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
- new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
+ new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
new_adapter->dev.parent = &pdev->dev;
+ new_adapter->nr = pdev->id;
/*
* Default values...should these come in from board code?
*/
- new_adapter->timeout = 100;
- new_adapter->retries = 3;
+ new_adapter->timeout = HZ;
new_adapter->algo = &iop3xx_i2c_algo;
init_waitqueue_head(&adapter_data->waitq);
platform_set_drvdata(pdev, new_adapter);
new_adapter->algo_data = adapter_data;
- i2c_add_adapter(new_adapter);
+ i2c_add_numbered_adapter(new_adapter);
return 0;
MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:IOP3xx-I2C");