#define FEATURE_I2C_BLOCK_READ (1 << 3)
static unsigned int i801_features;
+static const char *i801_feature_names[] = {
+ "SMBus PEC",
+ "Block buffer",
+ "Block process call",
+ "I2C block read",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+
/* Make sure the SMBus host is ready to start transmitting.
Return 0 if it is, -EBUSY if it is not. */
static int i801_check_pre(void)
do {
msleep(1);
status = inb_p(SMBHSTSTS);
- }
- while ((!(status & SMBHSTSTS_BYTE_DONE))
- && (timeout++ < MAX_TIMEOUT));
+ } while ((!(status & SMBHSTSTS_BYTE_DONE))
+ && (timeout++ < MAX_TIMEOUT));
result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
}
/* Return negative errno on error. */
-static s32 i801_access(struct i2c_adapter * adap, u16 addr,
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data * data)
+ int size, union i2c_smbus_data *data)
{
int hwpec;
int block = 0;
else
outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
- if(block)
+ if (block)
ret = i801_block_transaction(data, read_write, size, hwpec);
else
ret = i801_transaction(xact | ENABLE_INT9);
outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
SMBAUXCTL);
- if(block)
+ if (block)
return ret;
- if(ret)
+ if (ret)
return ret;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
return 0;
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, i801_ids);
+MODULE_DEVICE_TABLE(pci, i801_ids);
#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
static unsigned char apanel_addr;
}
#endif
-static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit i801_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
unsigned char temp;
- int err;
+ int err, i;
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
const char *vendor;
#endif
I801_dev = dev;
i801_features = 0;
switch (dev->device) {
- case PCI_DEVICE_ID_INTEL_82801EB_3:
- case PCI_DEVICE_ID_INTEL_ESB_4:
- case PCI_DEVICE_ID_INTEL_ICH6_16:
- case PCI_DEVICE_ID_INTEL_ICH7_17:
- case PCI_DEVICE_ID_INTEL_ESB2_17:
- case PCI_DEVICE_ID_INTEL_ICH8_5:
- case PCI_DEVICE_ID_INTEL_ICH9_6:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
- case PCI_DEVICE_ID_INTEL_ICH10_4:
- case PCI_DEVICE_ID_INTEL_ICH10_5:
- case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
- case PCI_DEVICE_ID_INTEL_CPT_SMBUS:
+ default:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
i801_features |= FEATURE_SMBUS_PEC;
i801_features |= FEATURE_BLOCK_BUFFER;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801CA_3:
+ case PCI_DEVICE_ID_INTEL_82801BA_2:
+ case PCI_DEVICE_ID_INTEL_82801AB_3:
+ case PCI_DEVICE_ID_INTEL_82801AA_3:
break;
}
+ /* Disable features on user request */
+ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+ if (i801_features & disable_features & (1 << i))
+ dev_notice(&dev->dev, "%s disabled by user\n",
+ i801_feature_names[i]);
+ }
+ i801_features &= ~disable_features;
+
err = pci_enable_device(dev);
if (err) {
dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",