#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static unsigned short force_addr = 0;
+static unsigned short force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Addresses to scan.
+/* Device address
Note that we can't determine the ISA address until we have initialized
our module */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_1(via686a);
+static unsigned short address;
/*
The Via 686a southbridge has a LM78-like chip integrated on the same IC.
but the function is very linear in the useful range (0-80 deg C), so
we'll just use linear interpolation for 10-bit readings.) So, tempLUT
is the temp at via register values 0-255: */
-static const long tempLUT[] =
+static const s16 tempLUT[] =
{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
}
/* for 8-bit temperature hyst and over registers */
-#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100)
/* for 10-bit temperature readings */
static inline long TEMP_FROM_REG10(u16 val)
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
-static int via686a_attach_adapter(struct i2c_adapter *adapter);
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detect(struct i2c_adapter *adapter);
static int via686a_detach_client(struct i2c_client *client);
static inline int via686a_read_value(struct i2c_client *client, u8 reg)
static struct i2c_driver via686a_driver = {
.owner = THIS_MODULE,
.name = "via686a",
- .id = I2C_DRIVERID_VIA686A,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = via686a_attach_adapter,
+ .attach_adapter = via686a_detect,
.detach_client = via686a_detach_client,
};
/* This is called when the module is loaded */
-static int via686a_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, via686a_detect);
-}
-
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+static int via686a_detect(struct i2c_adapter *adapter)
{
struct i2c_client *new_client;
struct via686a_data *data;
const char client_name[] = "via686a";
u16 val;
- /* Make sure we are probing the ISA bus!! */
- if (!i2c_is_isa_adapter(adapter)) {
- dev_err(&adapter->dev,
- "via686a_detect called for an I2C bus adapter?!?\n");
- return 0;
- }
-
/* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr)
- address = force_addr & 0xFF00;
-
if (force_addr) {
+ address = force_addr & 0xFF00;
dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
address);
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
+ if (force_addr) {
+ dev_info(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ } else {
+ dev_warn(&adapter->dev, "sensors disabled - enable "
+ "with force_addr=0x%x\n", address);
return -ENODEV;
+ }
}
/* Reserve the ISA region */
hwmon_device_unregister(data->class_dev);
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
release_region(client->addr, VIA686A_EXTENT);
kfree(data);
return 0;
}
-/* Called when we have found a new VIA686A. Set limits, etc. */
static void via686a_init_client(struct i2c_client *client)
{
u8 reg;
const struct pci_device_id *id)
{
u16 val;
- int addr = 0;
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(dev, VIA686A_BASE_REG, &val))
return -ENODEV;
- addr = val & ~(VIA686A_EXTENT - 1);
- if (addr == 0 && force_addr == 0) {
+ address = val & ~(VIA686A_EXTENT - 1);
+ if (address == 0 && force_addr == 0) {
dev_err(&dev->dev, "base address not set - upgrade BIOS "
"or use force_addr=0xaddr\n");
return -ENODEV;
}
- if (force_addr)
- addr = force_addr; /* so detect will get called */
-
- if (!addr) {
- dev_err(&dev->dev, "No Via 686A sensors found.\n");
- return -ENODEV;
- }
- normal_isa[0] = addr;
s_bridge = pci_dev_get(dev);
if (i2c_isa_add_driver(&via686a_driver)) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff