ixgbe: Cleanup incorrect header comments

[safe/jmp/linux-2.6] / drivers / hwmon / max6650.c

diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 58f66be..a0160ee 100644 (file)
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -62,8 +62,6 @@ module_param(fan_voltage, int, S_IRUGO);
 module_param(prescaler, int, S_IRUGO);
 module_param(clock, int, S_IRUGO);
 
-I2C_CLIENT_INSMOD_1(max6650);
-
 /*
  * MAX 6650/6651 registers
  */
@@ -116,7 +114,7 @@ I2C_CLIENT_INSMOD_1(max6650);
 
 static int max6650_probe(struct i2c_client *client,
                         const struct i2c_device_id *id);
-static int max6650_detect(struct i2c_client *client, int kind,
+static int max6650_detect(struct i2c_client *client,
                          struct i2c_board_info *info);
 static int max6650_init_client(struct i2c_client *client);
 static int max6650_remove(struct i2c_client *client);
@@ -127,7 +125,7 @@ static struct max6650_data *max6650_update_device(struct device *dev);
  */
 
 static const struct i2c_device_id max6650_id[] = {
-       { "max6650", max6650 },
+       { "max6650", 0 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, max6650_id);
@@ -141,7 +139,7 @@ static struct i2c_driver max6650_driver = {
        .remove         = max6650_remove,
        .id_table       = max6650_id,
        .detect         = max6650_detect,
-       .address_data   = &addr_data,
+       .address_list   = normal_i2c,
 };
 
 /*
@@ -528,13 +526,13 @@ static struct attribute_group max6650_attr_grp = {
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int max6650_detect(struct i2c_client *client, int kind,
+static int max6650_detect(struct i2c_client *client,
                          struct i2c_board_info *info)
 {
        struct i2c_adapter *adapter = client->adapter;
        int address = client->addr;
 
-       dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
+       dev_dbg(&adapter->dev, "max6650_detect called\n");
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
                dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
@@ -542,23 +540,7 @@ static int max6650_detect(struct i2c_client *client, int kind,
                return -ENODEV;
        }
 
-       /*
-        * Now we do the remaining detection. A negative kind means that
-        * the driver was loaded with no force parameter (default), so we
-        * must both detect and identify the chip (actually there is only
-        * one possible kind of chip for now, max6650). A zero kind means that
-        * the driver was loaded with the force parameter, the detection
-        * step shall be skipped. A positive kind means that the driver
-        * was loaded with the force parameter and a given kind of chip is
-        * requested, so both the detection and the identification steps
-        * are skipped.
-        *
-        * Currently I can find no way to distinguish between a MAX6650 and
-        * a MAX6651. This driver has only been tried on the former.
-        */
-
-       if ((kind < 0) &&
-          (  (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
+       if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
            ||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0)
            ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0)
            ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0)