/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
* Since the datasheet omits to give the chip stepping code, I give it
* here: 0x03 (at register 0xff).
*
+ * Also supports the LM82 temp sensor, which is basically a stripped down
+ * model of the LM83. Datasheet is here:
+ * http://www.national.com/pf/LM/LM82.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
/*
* Addresses to scan
0x29, 0x2a, 0x2b,
0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_2(lm83, lm82);
/*
* The LM83 registers
*/
static struct i2c_driver lm83_driver = {
- .owner = THIS_MODULE,
- .name = "lm83",
+ .driver = {
+ .name = "lm83",
+ },
.id = I2C_DRIVERID_LM83,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm83_attach_adapter,
.detach_client = lm83_detach_client,
};
struct lm83_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct class_device *class_dev;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
data->temp[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
return sprintf(buf, "%d\n", data->alarms);
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm83_data *data = lm83_update_device(dev);
+ int bitnr = attr->index;
+
+ return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
+}
+
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
set_temp, 8);
static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
+
+/* Individual alarm files */
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp4_input_fault, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
+/* Raw alarm file for compatibility */
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static struct attribute *lm83_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &dev_attr_alarms.attr,
+ NULL
+};
+
+static const struct attribute_group lm83_group = {
+ .attrs = lm83_attributes,
+};
+
+static struct attribute *lm83_attributes_opt[] = {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm83_group_opt = {
+ .attrs = lm83_attributes_opt,
+};
+
/*
* Real code
*/
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm83_detect);
+ return i2c_probe(adapter, &addr_data, lm83_detect);
}
/*
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm83_data));
/* The common I2C client data is placed right after the
* LM83-specific data. */
if (man_id == 0x01) { /* National Semiconductor */
if (chip_id == 0x03) {
kind = lm83;
+ } else
+ if (chip_id == 0x01) {
+ kind = lm82;
}
}
if (kind == lm83) {
name = "lm83";
+ } else
+ if (kind == lm82) {
+ name = "lm82";
}
/* We can fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto exit_free;
/*
- * Initialize the LM83 chip
- * (Nothing to do for this one.)
+ * Register sysfs hooks
+ * The LM82 can only monitor one external diode which is
+ * at the same register as the LM83 temp3 entry - so we
+ * declare 1 and 3 common, and then 2 and 4 only for the LM83.
*/
- /* Register sysfs hooks */
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_crit.dev_attr);
- device_create_file(&new_client->dev, &dev_attr_alarms);
+ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
+ goto exit_detach;
+
+ if (kind == lm83) {
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm83_group_opt)))
+ goto exit_remove_files;
+ }
+
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove_files;
+ }
return 0;
+exit_remove_files:
+ sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
+ sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
static int lm83_detach_client(struct i2c_client *client)
{
+ struct lm83_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Client deregistration failed, client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm83_group);
+ sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
struct i2c_client *client = to_i2c_client(dev);
struct lm83_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int nr;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff