/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
* Since the datasheet omits to give the chip stepping code, I give it
* here: 0x03 (at register 0xff).
*
+ * Also supports the LM82 temp sensor, which is basically a stripped down
+ * model of the LM83. Datasheet is here:
+ * http://www.national.com/pf/LM/LM82.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
/*
* Addresses to scan
* addresses.
*/
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
- 0x29, 0x2a, 0x2b,
- 0x4c, 0x4d, 0x4e,
- I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+ 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
/*
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_2(lm83, lm82);
/*
* The LM83 registers
* Functions declaration
*/
-static int lm83_attach_adapter(struct i2c_adapter *adapter);
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind);
-static int lm83_detach_client(struct i2c_client *client);
+static int lm83_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info);
+static int lm83_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm83_remove(struct i2c_client *client);
static struct lm83_data *lm83_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm83_id[] = {
+ { "lm83", lm83 },
+ { "lm82", lm82 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm83_id);
+
static struct i2c_driver lm83_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm83",
},
- .id = I2C_DRIVERID_LM83,
- .attach_adapter = lm83_attach_adapter,
- .detach_client = lm83_detach_client,
+ .probe = lm83_probe,
+ .remove = lm83_remove,
+ .id_table = lm83_id,
+ .detect = lm83_detect,
+ .address_data = &addr_data,
};
/*
*/
struct lm83_data {
- struct i2c_client client;
- struct class_device *class_dev;
- struct semaphore update_lock;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
data->temp[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
return sprintf(buf, "%d\n", data->alarms);
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm83_data *data = lm83_update_device(dev);
+ int bitnr = attr->index;
+
+ return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
+}
+
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
set_temp, 8);
static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
+
+/* Individual alarm files */
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
+/* Raw alarm file for compatibility */
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-/*
- * Real code
- */
+static struct attribute *lm83_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &dev_attr_alarms.attr,
+ NULL
+};
-static int lm83_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm83_detect);
-}
+static const struct attribute_group lm83_group = {
+ .attrs = lm83_attributes,
+};
+
+static struct attribute *lm83_attributes_opt[] = {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm83_group_opt = {
+ .attrs = lm83_attributes_opt,
+};
/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
+ * Real code
*/
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm83_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm83_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right after the
- * LM83-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm83_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Now we do the detection and identification. A negative kind
* means that the driver was loaded with no force parameter
((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
& 0x41) != 0x00)) {
dev_dbg(&adapter->dev,
- "LM83 detection failed at 0x%02x.\n", address);
- goto exit_free;
+ "LM83 detection failed at 0x%02x.\n",
+ new_client->addr);
+ return -ENODEV;
}
}
if (man_id == 0x01) { /* National Semiconductor */
if (chip_id == 0x03) {
kind = lm83;
+ } else
+ if (chip_id == 0x01) {
+ kind = lm82;
}
}
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
if (kind == lm83) {
name = "lm83";
+ } else
+ if (kind == lm82) {
+ name = "lm82";
}
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->valid = 0;
- init_MUTEX(&data->update_lock);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+ return 0;
+}
+
+static int lm83_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm83_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
+ data->valid = 0;
+ mutex_init(&data->update_lock);
/*
- * Initialize the LM83 chip
- * (Nothing to do for this one.)
+ * Register sysfs hooks
+ * The LM82 can only monitor one external diode which is
+ * at the same register as the LM83 temp3 entry - so we
+ * declare 1 and 3 common, and then 2 and 4 only for the LM83.
*/
- /* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
- goto exit_detach;
+ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
+ goto exit_free;
+
+ if (id->driver_data == lm83) {
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm83_group_opt)))
+ goto exit_remove_files;
}
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp3_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_crit.dev_attr);
- device_create_file(&new_client->dev, &dev_attr_alarms);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
return 0;
-exit_detach:
- i2c_detach_client(new_client);
+exit_remove_files:
+ sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
+ sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
exit_free:
kfree(data);
exit:
return err;
}
-static int lm83_detach_client(struct i2c_client *client)
+static int lm83_remove(struct i2c_client *client)
{
struct lm83_data *data = i2c_get_clientdata(client);
- int err;
-
- hwmon_device_unregister(data->class_dev);
- if ((err = i2c_detach_client(client)))
- return err;
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm83_group);
+ sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
kfree(data);
return 0;
struct i2c_client *client = to_i2c_client(dev);
struct lm83_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int nr;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}