#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
#include "lm75.h"
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+/*
+ * This driver handles the LM75 and compatible digital temperature sensors.
+ * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be
+ * listed here. We start at 9 since I2C_CLIENT_INSMOD_*() currently allow
+ * definition of up to 8 chip types (plus zero).
+ */
+
+enum lm75_type { /* keep sorted in alphabetical order */
+ ds1775 = 9,
+ ds75,
+ /* lm75 -- in I2C_CLIENT_INSMOD_1() */
+ lm75a,
+ max6625,
+ max6626,
+ mcp980x,
+ stds75,
+ tcn75,
+ tmp100,
+ tmp101,
+ tmp175,
+ tmp275,
+ tmp75,
+};
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm75);
+I2C_CLIENT_INSMOD_1(lm75);
-/* Many LM75 constants specified below */
/* The LM75 registers */
-#define LM75_REG_TEMP 0x00
#define LM75_REG_CONF 0x01
-#define LM75_REG_TEMP_HYST 0x02
-#define LM75_REG_TEMP_OS 0x03
+static const u8 LM75_REG_TEMP[3] = {
+ 0x00, /* input */
+ 0x03, /* max */
+ 0x02, /* hyst */
+};
/* Each client has this additional data */
struct lm75_data {
- struct i2c_client client;
- struct semaphore update_lock;
- char valid; /* !=0 if following fields are valid */
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ u8 orig_conf;
+ char valid; /* !=0 if registers are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp_input; /* Register values */
- u16 temp_max;
- u16 temp_hyst;
+ u16 temp[3]; /* Register values,
+ 0 = input
+ 1 = max
+ 2 = hyst */
};
-static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
-static void lm75_init_client(struct i2c_client *client);
-static int lm75_detach_client(struct i2c_client *client);
static int lm75_read_value(struct i2c_client *client, u8 reg);
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct lm75_data *lm75_update_device(struct device *dev);
-/* This is the driver that will be inserted */
-static struct i2c_driver lm75_driver = {
- .owner = THIS_MODULE,
- .name = "lm75",
- .id = I2C_DRIVERID_LM75,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = lm75_attach_adapter,
- .detach_client = lm75_detach_client,
-};
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
-#define show(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct lm75_data *data = lm75_update_device(dev); \
- return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct lm75_data *data = lm75_update_device(dev);
+ return sprintf(buf, "%d\n",
+ LM75_TEMP_FROM_REG(data->temp[attr->index]));
}
-show(temp_max);
-show(temp_hyst);
-show(temp_input);
-
-#define set(value, reg) \
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm75_data *data = i2c_get_clientdata(client); \
- int temp = simple_strtoul(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->value = LM75_TEMP_TO_REG(temp); \
- lm75_write_value(client, reg, data->value); \
- up(&data->update_lock); \
- return count; \
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm75_data *data = i2c_get_clientdata(client);
+ int nr = attr->index;
+ long temp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp[nr] = LM75_TEMP_TO_REG(temp);
+ lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
}
-set(temp_max, LM75_REG_TEMP_OS);
-set(temp_hyst, LM75_REG_TEMP_HYST);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+
+static struct attribute *lm75_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group lm75_group = {
+ .attrs = lm75_attributes,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
+static int
+lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, lm75_detect);
+ struct lm75_data *data;
+ int status;
+ u8 set_mask, clr_mask;
+ int new;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+ return -EIO;
+
+ data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
+ * Then tweak to be more precise when appropriate.
+ */
+ set_mask = 0;
+ clr_mask = (1 << 0) /* continuous conversions */
+ | (1 << 6) | (1 << 5); /* 9-bit mode */
+
+ /* configure as specified */
+ status = lm75_read_value(client, LM75_REG_CONF);
+ if (status < 0) {
+ dev_dbg(&client->dev, "Can't read config? %d\n", status);
+ goto exit_free;
+ }
+ data->orig_conf = status;
+ new = status & ~clr_mask;
+ new |= set_mask;
+ if (status != new)
+ lm75_write_value(client, LM75_REG_CONF, new);
+ dev_dbg(&client->dev, "Config %02x\n", new);
+
+ /* Register sysfs hooks */
+ status = sysfs_create_group(&client->dev.kobj, &lm75_group);
+ if (status)
+ goto exit_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ status = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ dev_info(&client->dev, "%s: sensor '%s'\n",
+ dev_name(data->hwmon_dev), client->name);
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &lm75_group);
+exit_free:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+ return status;
+}
+
+static int lm75_remove(struct i2c_client *client)
+{
+ struct lm75_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm75_group);
+ lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+ return 0;
}
-/* This function is called by i2c_detect */
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+static const struct i2c_device_id lm75_ids[] = {
+ { "ds1775", ds1775, },
+ { "ds75", ds75, },
+ { "lm75", lm75, },
+ { "lm75a", lm75a, },
+ { "max6625", max6625, },
+ { "max6626", max6626, },
+ { "mcp980x", mcp980x, },
+ { "stds75", stds75, },
+ { "tcn75", tcn75, },
+ { "tmp100", tmp100, },
+ { "tmp101", tmp101, },
+ { "tmp175", tmp175, },
+ { "tmp275", tmp275, },
+ { "tmp75", tmp75, },
+ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm75_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm75_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
+ struct i2c_adapter *adapter = new_client->adapter;
int i;
- struct i2c_client *new_client;
- struct lm75_data *data;
- int err = 0;
- const char *name = "";
-
- /* Make sure we aren't probing the ISA bus!! This is just a safety check
- at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
- if (i2c_is_isa_adapter(adapter)) {
- dev_dbg(&adapter->dev,
- "lm75_detect called for an ISA bus adapter?!?\n");
- goto exit;
- }
-#endif
+ int cur, conf, hyst, os;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access lm75_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- memset(data, 0, sizeof(struct lm75_data));
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm75_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Now, we do the remaining detection. There is no identification-
dedicated register so we have to rely on several tricks:
The cycling+unused addresses combination is not tested,
since it would significantly slow the detection down and would
hardly add any value. */
- if (kind < 0) {
- int cur, conf, hyst, os;
-
- /* Unused addresses */
- cur = i2c_smbus_read_word_data(new_client, 0);
- conf = i2c_smbus_read_byte_data(new_client, 1);
- hyst = i2c_smbus_read_word_data(new_client, 2);
- if (i2c_smbus_read_word_data(new_client, 4) != hyst
- || i2c_smbus_read_word_data(new_client, 5) != hyst
- || i2c_smbus_read_word_data(new_client, 6) != hyst
- || i2c_smbus_read_word_data(new_client, 7) != hyst)
- goto exit_free;
- os = i2c_smbus_read_word_data(new_client, 3);
- if (i2c_smbus_read_word_data(new_client, 4) != os
- || i2c_smbus_read_word_data(new_client, 5) != os
- || i2c_smbus_read_word_data(new_client, 6) != os
- || i2c_smbus_read_word_data(new_client, 7) != os)
- goto exit_free;
-
- /* Unused bits */
- if (conf & 0xe0)
- goto exit_free;
-
- /* Addresses cycling */
- for (i = 8; i < 0xff; i += 8)
- if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
- || i2c_smbus_read_word_data(new_client, i + 2) != hyst
- || i2c_smbus_read_word_data(new_client, i + 3) != os)
- goto exit_free;
- }
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = lm75;
-
- if (kind == lm75) {
- name = "lm75";
+ /* Unused addresses */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ conf = i2c_smbus_read_byte_data(new_client, 1);
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ if (i2c_smbus_read_word_data(new_client, 4) != hyst
+ || i2c_smbus_read_word_data(new_client, 5) != hyst
+ || i2c_smbus_read_word_data(new_client, 6) != hyst
+ || i2c_smbus_read_word_data(new_client, 7) != hyst)
+ return -ENODEV;
+ os = i2c_smbus_read_word_data(new_client, 3);
+ if (i2c_smbus_read_word_data(new_client, 4) != os
+ || i2c_smbus_read_word_data(new_client, 5) != os
+ || i2c_smbus_read_word_data(new_client, 6) != os
+ || i2c_smbus_read_word_data(new_client, 7) != os)
+ return -ENODEV;
+
+ /* Unused bits */
+ if (conf & 0xe0)
+ return -ENODEV;
+
+ /* Addresses cycling */
+ for (i = 8; i < 0xff; i += 8) {
+ if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+ || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+ || i2c_smbus_read_word_data(new_client, i + 3) != os)
+ return -ENODEV;
}
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->valid = 0;
- init_MUTEX(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
- /* Initialize the LM75 chip */
- lm75_init_client(new_client);
-
- /* Register sysfs hooks */
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
+ strlcpy(info->type, "lm75", I2C_NAME_SIZE);
return 0;
-
-exit_free:
- kfree(data);
-exit:
- return err;
}
-static int lm75_detach_client(struct i2c_client *client)
-{
- i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
+static struct i2c_driver lm75_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm75",
+ },
+ .probe = lm75_probe,
+ .remove = lm75_remove,
+ .id_table = lm75_ids,
+ .detect = lm75_detect,
+ .address_data = &addr_data,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* register access */
/* All registers are word-sized, except for the configuration register.
LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
+ int value;
+
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
- else
- return swab16(i2c_smbus_read_word_data(client, reg));
+
+ value = i2c_smbus_read_word_data(client, reg);
+ return (value < 0) ? value : swab16(value);
}
-/* All registers are word-sized, except for the configuration register.
- LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == LM75_REG_CONF)
return i2c_smbus_write_word_data(client, reg, swab16(value));
}
-static void lm75_init_client(struct i2c_client *client)
-{
- int reg;
-
- /* Enable if in shutdown mode */
- reg = lm75_read_value(client, LM75_REG_CONF);
- if (reg >= 0 && (reg & 0x01))
- lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
-}
-
static struct lm75_data *lm75_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm75_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
+ int i;
dev_dbg(&client->dev, "Starting lm75 update\n");
- data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
- data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS);
- data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ int status;
+
+ status = lm75_read_value(client, LM75_REG_TEMP[i]);
+ if (status < 0)
+ dev_dbg(&client->dev, "reg %d, err %d\n",
+ LM75_REG_TEMP[i], status);
+ else
+ data->temp[i] = status;
+ }
data->last_updated = jiffies;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
+/*-----------------------------------------------------------------------*/
+
+/* module glue */
+
static int __init sensors_lm75_init(void)
{
return i2c_add_driver(&lm75_driver);