/*
* lm63.c - driver for the National Semiconductor LM63 temperature sensor
* with integrated fan control
- * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org>
* Based on the lm90 driver.
*
* The LM63 is a sensor chip made by National Semiconductor. It measures
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
/*
* Addresses to scan
* Address is fully defined internally and cannot be changed.
*/
-static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-
-I2C_CLIENT_INSMOD_1(lm63);
+static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
/*
* The LM63 registers
* Functions declaration
*/
-static int lm63_attach_adapter(struct i2c_adapter *adapter);
-static int lm63_detach_client(struct i2c_client *client);
+static int lm63_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm63_remove(struct i2c_client *client);
static struct lm63_data *lm63_update_device(struct device *dev);
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
static void lm63_init_client(struct i2c_client *client);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm63_id[] = {
+ { "lm63", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
+
static struct i2c_driver lm63_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm63",
},
- .attach_adapter = lm63_attach_adapter,
- .detach_client = lm63_detach_client,
+ .probe = lm63_probe,
+ .remove = lm63_remove,
+ .id_table = lm63_id,
+ .detect = lm63_detect,
+ .address_list = normal_i2c,
};
/*
*/
struct lm63_data {
- struct i2c_client client;
- struct class_device *class_dev;
- struct semaphore update_lock;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
struct lm63_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan[1] = FAN_TO_REG(val);
i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
data->fan[1] & 0xFF);
i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
data->fan[1] >> 8);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
return -EPERM;
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm1_value = val <= 0 ? 0 :
val >= 255 ? 2 * data->pwm1_freq :
(val * data->pwm1_freq * 2 + 127) / 255;
i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
struct lm63_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp8[1] = TEMP8_TO_REG(val);
i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp11[nr] = TEMP11_TO_REG(val);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
data->temp11[nr] >> 8);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
data->temp11[nr] & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
long val = simple_strtol(buf, NULL, 10);
long hyst;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
HYST_TO_REG(hyst));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
return sprintf(buf, "%u\n", data->alarms);
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm63_data *data = lm63_update_device(dev);
+ int bitnr = attr->index;
+
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
set_fan, 1);
static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
set_temp2_crit_hyst);
+/* Individual alarm files */
+static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
+/* Raw alarm file for compatibility */
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static struct attribute *lm63_attributes[] = {
+ &dev_attr_pwm1.attr,
+ &dev_attr_pwm1_enable.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &dev_attr_temp2_crit_hyst.attr,
+
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &dev_attr_alarms.attr,
+ NULL
+};
+
+static const struct attribute_group lm63_group = {
+ .attrs = lm63_attributes,
+};
+
+static struct attribute *lm63_attributes_fan1[] = {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm63_group_fan1 = {
+ .attrs = lm63_attributes_fan1,
+};
+
/*
* Real code
*/
-static int lm63_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm63_detect(struct i2c_client *new_client,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm63_detect);
+ struct i2c_adapter *adapter = new_client->adapter;
+ u8 man_id, chip_id, reg_config1, reg_config2;
+ u8 reg_alert_status, reg_alert_mask;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+
+ reg_config1 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG1);
+ reg_config2 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG2);
+ reg_alert_status = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_STATUS);
+ reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_MASK);
+
+ if (man_id != 0x01 /* National Semiconductor */
+ || chip_id != 0x41 /* LM63 */
+ || (reg_config1 & 0x18) != 0x00
+ || (reg_config2 & 0xF8) != 0x00
+ || (reg_alert_status & 0x20) != 0x00
+ || (reg_alert_mask & 0xA4) != 0xA4) {
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+
+ return 0;
}
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm63_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *new_client;
struct lm63_data *data;
- int err = 0;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
+ int err;
- if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto exit;
}
- /* The common I2C client data is placed right before the
- LM63-specific data. */
- new_client = &data->client;
i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm63_driver;
- new_client->flags = 0;
-
- /* Default to an LM63 if forced */
- if (kind == 0)
- kind = lm63;
-
- if (kind < 0) { /* must identify */
- u8 man_id, chip_id, reg_config1, reg_config2;
- u8 reg_alert_status, reg_alert_mask;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG1);
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG2);
- reg_alert_status = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_STATUS);
- reg_alert_mask = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_MASK);
-
- if (man_id == 0x01 /* National Semiconductor */
- && chip_id == 0x41 /* LM63 */
- && (reg_config1 & 0x18) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && (reg_alert_status & 0x20) == 0x00
- && (reg_alert_mask & 0xA4) == 0xA4) {
- kind = lm63;
- } else { /* failed */
- dev_dbg(&adapter->dev, "Unsupported chip "
- "(man_id=0x%02X, chip_id=0x%02X).\n",
- man_id, chip_id);
- goto exit_free;
- }
- }
-
- strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+ mutex_init(&data->update_lock);
/* Initialize the LM63 chip */
lm63_init_client(new_client);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
- goto exit_detach;
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm63_group)))
+ goto exit_free;
+ if (data->config & 0x04) { /* tachometer enabled */
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm63_group_fan1)))
+ goto exit_remove_files;
}
- if (data->config & 0x04) { /* tachometer enabled */
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_min.dev_attr);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
}
- device_create_file(&new_client->dev, &dev_attr_pwm1);
- device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_min.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
- device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
-exit_detach:
- i2c_detach_client(new_client);
+exit_remove_files:
+ sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
+ sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
exit_free:
kfree(data);
exit:
/* Start converting if needed */
if (data->config & 0x40) { /* standby */
- dev_dbg(&client->dev, "Switching to operational mode");
+ dev_dbg(&client->dev, "Switching to operational mode\n");
data->config &= 0xA7;
i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,
data->config);
(data->config_fan & 0x20) ? "manual" : "auto");
}
-static int lm63_detach_client(struct i2c_client *client)
+static int lm63_remove(struct i2c_client *client)
{
struct lm63_data *data = i2c_get_clientdata(client);
- int err;
-
- hwmon_device_unregister(data->class_dev);
- if ((err = i2c_detach_client(client)))
- return err;
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm63_group);
+ sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
kfree(data);
return 0;
struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
if (data->config & 0x04) { /* tachometer enabled */
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff