tree-wide: fix assorted typos all over the place
[safe/jmp/linux-2.6] / drivers / hwmon / lis3lv02d.h
index 223f1c0..3e1ff46 100644 (file)
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
 
 /*
  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
  * be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
  * They can also be connected via I²C.
  */
 
-#define LIS3LV02DL_ID  0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID    0x3B /* Also the LIS202DL! */
+#include <linux/lis3lv02d.h>
 
-enum lis3lv02d_reg {
+/* 2-byte registers */
+#define LIS_DOUBLE_ID  0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID  0x3B /* LIS[32]02DL and others */
+
+enum lis3_reg {
        WHO_AM_I        = 0x0F,
        OFFSET_X        = 0x16,
        OFFSET_Y        = 0x17,
@@ -44,10 +51,34 @@ enum lis3lv02d_reg {
        STATUS_REG      = 0x27,
        OUTX_L          = 0x28,
        OUTX_H          = 0x29,
+       OUTX            = 0x29,
        OUTY_L          = 0x2A,
        OUTY_H          = 0x2B,
+       OUTY            = 0x2B,
        OUTZ_L          = 0x2C,
        OUTZ_H          = 0x2D,
+       OUTZ            = 0x2D,
+};
+
+enum lis302d_reg {
+       FF_WU_CFG_1     = 0x30,
+       FF_WU_SRC_1     = 0x31,
+       FF_WU_THS_1     = 0x32,
+       FF_WU_DURATION_1 = 0x33,
+       FF_WU_CFG_2     = 0x34,
+       FF_WU_SRC_2     = 0x35,
+       FF_WU_THS_2     = 0x36,
+       FF_WU_DURATION_2 = 0x37,
+       CLICK_CFG       = 0x38,
+       CLICK_SRC       = 0x39,
+       CLICK_THSY_X    = 0x3B,
+       CLICK_THSZ      = 0x3C,
+       CLICK_TIMELIMIT = 0x3D,
+       CLICK_LATENCY   = 0x3E,
+       CLICK_WINDOW    = 0x3F,
+};
+
+enum lis3lv02d_reg {
        FF_WU_CFG       = 0x30,
        FF_WU_SRC       = 0x31,
        FF_WU_ACK       = 0x32,
@@ -84,6 +115,10 @@ enum lis3lv02d_ctrl2 {
        CTRL2_FS        = 0x80, /* Full Scale selection */
 };
 
+enum lis302d_ctrl2 {
+       HP_FF_WU2       = 0x08,
+       HP_FF_WU1       = 0x04,
+};
 
 enum lis3lv02d_ctrl3 {
        CTRL3_CFS0      = 0x01,
@@ -153,30 +188,37 @@ struct axis_conversion {
        s8      z;
 };
 
-struct acpi_lis3lv02d {
-       struct acpi_device      *device;   /* The ACPI device */
-       acpi_status (*init) (acpi_handle handle);
-       acpi_status (*write) (acpi_handle handle, int reg, u8 val);
-       acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+struct lis3lv02d {
+       void                    *bus_priv; /* used by the bus layer only */
+       int (*init) (struct lis3lv02d *lis3);
+       int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
+       int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
+
+       u8                      whoami;    /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+       s16 (*read_data) (struct lis3lv02d *lis3, int reg);
+       int                     mdps_max_val;
 
-       struct input_dev        *idev;     /* input device */
-       struct task_struct      *kthread;  /* kthread for input */
-       struct mutex            lock;
+       struct input_polled_dev *idev;     /* input device */
        struct platform_device  *pdev;     /* platform device */
        atomic_t                count;     /* interrupt count after last read */
        int                     xcalib;    /* calibrated null value for x */
        int                     ycalib;    /* calibrated null value for y */
        int                     zcalib;    /* calibrated null value for z */
-       unsigned char           is_on;     /* whether the device is on or off */
-       unsigned char           usage;     /* usage counter */
        struct axis_conversion  ac;        /* hw -> logical axis */
+
+       u32                     irq;       /* IRQ number */
+       struct fasync_struct    *async_queue; /* queue for the misc device */
+       wait_queue_head_t       misc_wait; /* Wait queue for the misc device */
+       unsigned long           misc_opened; /* bit0: whether the device is open */
+
+       struct lis3lv02d_platform_data *pdata;  /* for passing board config */
 };
 
-int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
+int lis3lv02d_init_device(struct lis3lv02d *lis3);
 int lis3lv02d_joystick_enable(void);
 void lis3lv02d_joystick_disable(void);
-void lis3lv02d_poweroff(acpi_handle handle);
-void lis3lv02d_poweron(acpi_handle handle);
-int lis3lv02d_remove_fs(void);
+void lis3lv02d_poweroff(struct lis3lv02d *lis3);
+void lis3lv02d_poweron(struct lis3lv02d *lis3);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
 
-extern struct acpi_lis3lv02d adev;
+extern struct lis3lv02d lis3_dev;