Supports: IT8705F Super I/O chip w/LPC interface
IT8712F Super I/O chip w/LPC interface & SMBus
+ IT8716F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
static unsigned short isa_address;
/* Insmod parameters */
-I2C_CLIENT_INSMOD_2(it87, it8712);
+I2C_CLIENT_INSMOD_3(it87, it8712, it8716);
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define IT8712F_DEVID 0x8712
#define IT8705F_DEVID 0x8705
+#define IT8716F_DEVID 0x8716
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
#define IT87_REG_ALARM3 0x03
#define IT87_REG_VID 0x0a
+/* Warning: register 0x0b is used for something completely different in
+ new chips/revisions. I suspect only 16-bit tachometer mode will work
+ for these. */
#define IT87_REG_FAN_DIV 0x0b
+#define IT87_REG_FAN_16BIT 0x0c
/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
#define IT87_REG_FAN(nr) (0x0d + (nr))
#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
+#define IT87_REG_FANX(nr) (0x18 + (nr))
+#define IT87_REG_FANX_MIN(nr) (0x1b + (nr))
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
254);
}
+static inline u16 FAN16_TO_REG(long rpm)
+{
+ if (rpm == 0)
+ return 0xffff;
+ return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+}
+
#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+/* The divider is fixed to 2 in 16-bit mode */
+#define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2))
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
((val)+500)/1000),-128,127))
u8 in[9]; /* Register value */
u8 in_max[9]; /* Register value */
u8 in_min[9]; /* Register value */
- u8 fan[3]; /* Register value */
- u8 fan_min[3]; /* Register value */
+ u16 fan[3]; /* Register values, possibly combined */
+ u16 fan_min[3]; /* Register values, possibly combined */
u8 temp[3]; /* Register value */
u8 temp_high[3]; /* Register value */
u8 temp_low[3]; /* Register value */
show_pwm_offset(2);
show_pwm_offset(3);
+/* A different set of callbacks for 16-bit fans */
+static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
+}
+
+static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
+}
+
+static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[nr] = FAN16_TO_REG(val);
+ it87_write_value(client, IT87_REG_FAN_MIN(nr),
+ data->fan_min[nr] & 0xff);
+ it87_write_value(client, IT87_REG_FANX_MIN(nr),
+ data->fan_min[nr] >> 8);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/* We want to use the same sysfs file names as 8-bit fans, but we need
+ different variable names, so we have to use SENSOR_ATTR instead of
+ SENSOR_DEVICE_ATTR. */
+#define show_fan16_offset(offset) \
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
+ = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan16, NULL, offset - 1); \
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
+ = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan16_min, set_fan16_min, offset - 1)
+
+show_fan16_offset(1);
+show_fan16_offset(2);
+show_fan16_offset(3);
+
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
superio_enter();
chip_type = superio_inw(DEVID);
if (chip_type != IT8712F_DEVID
+ && chip_type != IT8716F_DEVID
&& chip_type != IT8705F_DEVID)
goto exit;
i = it87_read_value(new_client, IT87_REG_CHIPID);
if (i == 0x90) {
kind = it87;
- if ((is_isa) && (chip_type == IT8712F_DEVID))
- kind = it8712;
+ if (is_isa) {
+ switch (chip_type) {
+ case IT8712F_DEVID:
+ kind = it8712;
+ break;
+ case IT8716F_DEVID:
+ kind = it8716;
+ break;
+ }
+ }
}
else {
if (kind == 0)
name = "it87";
} else if (kind == it8712) {
name = "it8712";
+ } else if (kind == it8716) {
+ name = "it8716";
}
/* Fill in the remaining client fields and put it into the global list */
device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr);
+
+ if (data->type == it8716) { /* 16-bit tachometers */
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_input16.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_input16.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan3_input16.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_min16.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_min16.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan3_min16.dev_attr);
+ } else {
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan3_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan3_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan3_div.dev_attr);
+ }
+
device_create_file(&new_client->dev, &dev_attr_alarms);
if (enable_pwm_interface) {
device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
}
- if (data->type == it8712) {
+ if (data->type == it8712 || data->type == it8716) {
data->vrm = vid_which_vrm();
device_create_file_vrm(new_client);
device_create_file_vid(new_client);
it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
+ /* Set tachometers to 16-bit mode if needed */
+ if (data->type == it8716) {
+ tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
+ if ((tmp & 0x07) != 0x07) {
+ dev_dbg(&client->dev,
+ "Setting fan1-3 to 16-bit mode\n");
+ it87_write_value(client, IT87_REG_FAN_16BIT,
+ tmp | 0x07);
+ }
+ }
+
/* Set current fan mode registers and the default settings for the
* other mode registers */
for (i = 0; i < 3; i++) {
data->in_max[8] = 255;
for (i = 0; i < 3; i++) {
- data->fan[i] =
- it87_read_value(client, IT87_REG_FAN(i));
data->fan_min[i] =
it87_read_value(client, IT87_REG_FAN_MIN(i));
+ data->fan[i] = it87_read_value(client,
+ IT87_REG_FAN(i));
+ /* Add high byte if in 16-bit mode */
+ if (data->type == it8716) {
+ data->fan[i] |= it87_read_value(client,
+ IT87_REG_FANX(i)) << 8;
+ data->fan_min[i] |= it87_read_value(client,
+ IT87_REG_FANX_MIN(i)) << 8;
+ }
}
for (i = 0; i < 3; i++) {
data->temp[i] =
it87_read_value(client, IT87_REG_TEMP_LOW(i));
}
- i = it87_read_value(client, IT87_REG_FAN_DIV);
- data->fan_div[0] = i & 0x07;
- data->fan_div[1] = (i >> 3) & 0x07;
- data->fan_div[2] = (i & 0x40) ? 3 : 1;
+ /* Newer chips don't have clock dividers */
+ if (data->type != it8716) {
+ i = it87_read_value(client, IT87_REG_FAN_DIV);
+ data->fan_div[0] = i & 0x07;
+ data->fan_div[1] = (i >> 3) & 0x07;
+ data->fan_div[2] = (i & 0x40) ? 3 : 1;
+ }
data->alarms =
it87_read_value(client, IT87_REG_ALARM1) |
data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
/* The 8705 does not have VID capability */
- if (data->type == it8712) {
+ if (data->type == it8712 || data->type == it8716) {
data->vid = it87_read_value(client, IT87_REG_VID);
- data->vid &= 0x1f;
+ /* The older IT8712F revisions had only 5 VID pins,
+ but we assume it is always safe to read 6 bits. */
+ data->vid &= 0x3f;
}
data->last_updated = jiffies;
data->valid = 1;
MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
-MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
+MODULE_DESCRIPTION("IT8705F/8712F/8716F, SiS950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff