/*
- hwmon-vid.c - VID/VRM/VRD voltage conversions
+ * hwmon-vid.c - VID/VRM/VRD voltage conversions
+ *
+ * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * Partly imported from i2c-vid.h of the lm_sensors project
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * With assistance from Trent Piepho <xyzzy@speakeasy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
- Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
-
- Partly imported from i2c-vid.h of the lm_sensors project
- Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
- With assistance from Trent Piepho <xyzzy@speakeasy.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/hwmon-vid.h>
/*
- Common code for decoding VID pins.
-
- References:
-
- For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
- available at http://developer.intel.com/.
-
- For VRD 10.0 and up, "VRD x.y Design Guide",
- available at http://developer.intel.com/.
-
- AMD Opteron processors don't follow the Intel specifications.
- I'm going to "make up" 2.4 as the spec number for the Opterons.
- No good reason just a mnemonic for the 24x Opteron processor
- series.
-
- Opteron VID encoding is:
- 00000 = 1.550 V
- 00001 = 1.525 V
- . . . .
- 11110 = 0.800 V
- 11111 = 0.000 V (off)
-
- The 17 specification is in fact Intel Mobile Voltage Positioning -
- (IMVP-II). You can find more information in the datasheet of Max1718
- http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
-
- The 13 specification corresponds to the Intel Pentium M series. There
- doesn't seem to be any named specification for these. The conversion
- tables are detailed directly in the various Pentium M datasheets:
- http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
-
- The 14 specification corresponds to Intel Core series. There
- doesn't seem to be any named specification for these. The conversion
- tables are detailed directly in the various Pentium Core datasheets:
- http://www.intel.com/design/mobile/datashts/309221.htm
-
- The 110 (VRM 11) specification corresponds to Intel Conroe based series.
- http://www.intel.com/design/processor/applnots/313214.htm
-*/
-
-/* vrm is the VRM/VRD document version multiplied by 10.
- val is the 4-bit or more VID code.
- Returned value is in mV to avoid floating point in the kernel.
- Some VID have some bits in uV scale, this is rounded to mV */
+ * Common code for decoding VID pins.
+ *
+ * References:
+ *
+ * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+ * available at http://developer.intel.com/.
+ *
+ * For VRD 10.0 and up, "VRD x.y Design Guide",
+ * available at http://developer.intel.com/.
+ *
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+ * Table 71. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
+ *
+ * The 17 specification is in fact Intel Mobile Voltage Positioning -
+ * (IMVP-II). You can find more information in the datasheet of Max1718
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+ *
+ * The 13 specification corresponds to the Intel Pentium M series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium M datasheets:
+ * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
+ *
+ * The 14 specification corresponds to Intel Core series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium Core datasheets:
+ * http://www.intel.com/design/mobile/datashts/309221.htm
+ *
+ * The 110 (VRM 11) specification corresponds to Intel Conroe based series.
+ * http://www.intel.com/design/processor/applnots/313214.htm
+ */
+
+/*
+ * vrm is the VRM/VRD document version multiplied by 10.
+ * val is the 4-bit or more VID code.
+ * Returned value is in mV to avoid floating point in the kernel.
+ * Some VID have some bits in uV scale, this is rounded to mV.
+ */
int vid_from_reg(int val, u8 vrm)
{
int vid;
case 110: /* Intel Conroe */
/* compute in uV, round to mV */
val &= 0xff;
- if(((val & 0x7e) == 0xfe) || (!(val & 0x7e)))
+ if (val < 0x02 || val > 0xb2)
return 0;
return((1600000 - (val - 2) * 6250 + 500) / 1000);
- case 24: /* Opteron processor */
+
+ case 24: /* Athlon64 & Opteron */
val &= 0x1f;
- return(val == 0x1f ? 0 : 1550 - val * 25);
+ if (val == 0x1f)
+ return 0;
+ /* fall through */
+ case 25: /* AMD NPT 0Fh */
+ val &= 0x3f;
+ return (val < 32) ? 1550 - 25 * val
+ : 775 - (25 * (val - 31)) / 2;
case 91: /* VRM 9.1 */
case 90: /* VRM 9.0 */
val &= 0x7f;
return(val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000);
default: /* report 0 for unknown */
- printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n");
+ if (vrm)
+ printk(KERN_WARNING "hwmon-vid: Requested unsupported "
+ "VRM version (%u)\n", (unsigned int)vrm);
return 0;
}
}
/*
- After this point is the code to automatically determine which
- VRM/VRD specification should be used depending on the CPU.
-*/
+ * After this point is the code to automatically determine which
+ * VRM/VRD specification should be used depending on the CPU.
+ */
struct vrm_model {
u8 vendor;
#ifdef CONFIG_X86
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
static struct vrm_model vrm_models[] = {
{X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */
+ /* In theory, all NPT family 0Fh processors have 6 VID pins and should
+ thus use vrm 25, however in practice not all mainboards route the
+ 6th VID pin because it is never needed. So we use the 5 VID pin
+ variant (vrm 24) for the models which exist today. */
+ {X86_VENDOR_AMD, 0xF, 0x7F, ANY, 24}, /* NPT family 0Fh */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* future fam. 0Fh */
+ {X86_VENDOR_AMD, 0x10, ANY, ANY, 25}, /* NPT family 10h */
+
{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */
{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */
{X86_VENDOR_INTEL, 0x6, 0xE, ANY, 14}, /* Intel Core (65 nm) */
{X86_VENDOR_INTEL, 0x6, 0xF, ANY, 110}, /* Intel Conroe */
{X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */
- {X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */
{X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */
{X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */
{X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */
{X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */
- {X86_VENDOR_INTEL, 0x10, ANY, ANY, 0}, /* Itanium 2 */
+
{X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */
{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */
{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */
- {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */
+ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */
+ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */
+
{X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */
};
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
+ (vrm_models[i].eff_model >= 0x10 &&
+ eff_model <= vrm_models[i].eff_model) ||
(vrm_models[i].eff_model==ANY)) &&
(eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
u8 vid_which_vrm(void)
{
- struct cpuinfo_x86 *c = cpu_data;
+ struct cpuinfo_x86 *c = &cpu_data(0);
u32 eax;
u8 eff_family, eff_model, eff_stepping, vrm_ret;
EXPORT_SYMBOL(vid_from_reg);
EXPORT_SYMBOL(vid_which_vrm);
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("hwmon-vid driver");
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff