#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
#include <linux/kernel.h>
+#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/dmi.h>
#include <linux/jiffies.h>
-#include <asm/io.h>
+#include <linux/io.h>
#define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */
#define HDAPS_NR_PORTS 0x30 /* number of ports: 0x1600 - 0x162f */
#define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */
#define INIT_WAIT_MSECS 200 /* ... in 200ms increments */
-#define HDAPS_POLL_PERIOD (HZ/20) /* poll for input every 1/20s */
+#define HDAPS_POLL_INTERVAL 50 /* poll for input every 1/20s (50 ms)*/
#define HDAPS_INPUT_FUZZ 4 /* input event threshold */
#define HDAPS_INPUT_FLAT 4
-static struct timer_list hdaps_timer;
+#define HDAPS_X_AXIS (1 << 0)
+#define HDAPS_Y_AXIS (1 << 1)
+#define HDAPS_BOTH_AXES (HDAPS_X_AXIS | HDAPS_Y_AXIS)
+
static struct platform_device *pdev;
-static struct input_dev *hdaps_idev;
+static struct input_polled_dev *hdaps_idev;
static unsigned int hdaps_invert;
static u8 km_activity;
static int rest_x;
static int rest_y;
-static DECLARE_MUTEX(hdaps_sem);
+static DEFINE_MUTEX(hdaps_mtx);
/*
- * __get_latch - Get the value from a given port. Callers must hold hdaps_sem.
+ * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx.
*/
static inline u8 __get_latch(u16 port)
{
/*
* __check_latch - Check a port latch for a given value. Returns zero if the
- * port contains the given value. Callers must hold hdaps_sem.
+ * port contains the given value. Callers must hold hdaps_mtx.
*/
static inline int __check_latch(u16 port, u8 val)
{
/*
* __wait_latch - Wait up to 100us for a port latch to get a certain value,
- * returning zero if the value is obtained. Callers must hold hdaps_sem.
+ * returning zero if the value is obtained. Callers must hold hdaps_mtx.
*/
static int __wait_latch(u16 port, u8 val)
{
/*
* __device_refresh - request a refresh from the accelerometer. Does not wait
- * for refresh to complete. Callers must hold hdaps_sem.
+ * for refresh to complete. Callers must hold hdaps_mtx.
*/
static void __device_refresh(void)
{
/*
* __device_refresh_sync - request a synchronous refresh from the
* accelerometer. We wait for the refresh to complete. Returns zero if
- * successful and nonzero on error. Callers must hold hdaps_sem.
+ * successful and nonzero on error. Callers must hold hdaps_mtx.
*/
static int __device_refresh_sync(void)
{
/*
* __device_complete - indicate to the accelerometer that we are done reading
- * data, and then initiate an async refresh. Callers must hold hdaps_sem.
+ * data, and then initiate an async refresh. Callers must hold hdaps_mtx.
*/
static inline void __device_complete(void)
{
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
/* do a sync refresh -- we need to be sure that we read fresh data */
ret = __device_refresh_sync();
__device_complete();
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
km_activity = inb(HDAPS_PORT_KMACT);
__device_complete();
- /* if hdaps_invert is set, negate the two values */
- if (hdaps_invert) {
+ /* hdaps_invert is a bitvector to negate the axes */
+ if (hdaps_invert & HDAPS_X_AXIS)
*x = -*x;
+ if (hdaps_invert & HDAPS_Y_AXIS)
*y = -*y;
- }
return 0;
}
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
ret = __hdaps_read_pair(port1, port2, val1, val2);
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
{
int total, ret = -ENXIO;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
outb(0x13, 0x1610);
outb(0x01, 0x161f);
}
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
};
/*
- * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem.
+ * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx.
*/
static void hdaps_calibrate(void)
{
__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
}
-static void hdaps_mousedev_poll(unsigned long unused)
+static void hdaps_mousedev_poll(struct input_polled_dev *dev)
{
+ struct input_dev *input_dev = dev->input;
int x, y;
- /* Cannot sleep. Try nonblockingly. If we fail, try again later. */
- if (down_trylock(&hdaps_sem)) {
- mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
- return;
- }
+ mutex_lock(&hdaps_mtx);
if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
goto out;
- input_report_abs(hdaps_idev, ABS_X, x - rest_x);
- input_report_abs(hdaps_idev, ABS_Y, y - rest_y);
- input_sync(hdaps_idev);
-
- mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+ input_report_abs(input_dev, ABS_X, x - rest_x);
+ input_report_abs(input_dev, ABS_Y, y - rest_y);
+ input_sync(input_dev);
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
}
struct device_attribute *attr,
const char *buf, size_t count)
{
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
hdaps_calibrate();
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return count;
}
{
int invert;
- if (sscanf(buf, "%d", &invert) != 1 || (invert != 1 && invert != 0))
+ if (sscanf(buf, "%d", &invert) != 1 ||
+ invert < 0 || invert > HDAPS_BOTH_AXES)
return -EINVAL;
hdaps_invert = invert;
/* Module stuff */
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
-static int __init hdaps_dmi_match(struct dmi_system_id *id)
+static int __init hdaps_dmi_match(const struct dmi_system_id *id)
{
printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
return 1;
}
/* hdaps_dmi_match_invert - found an inverted match. */
-static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
+static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id)
{
- hdaps_invert = 1;
- printk(KERN_INFO "hdaps: inverting axis readings.\n");
+ hdaps_invert = (unsigned long)id->driver_data;
+ printk(KERN_INFO "hdaps: inverting axis (%u) readings.\n",
+ hdaps_invert);
return hdaps_dmi_match(id);
}
-#define HDAPS_DMI_MATCH_NORMAL(vendor, model) { \
- .ident = vendor " " model, \
- .callback = hdaps_dmi_match, \
- .matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
- DMI_MATCH(DMI_PRODUCT_VERSION, model) \
- } \
-}
-
-#define HDAPS_DMI_MATCH_INVERT(vendor, model) { \
+#define HDAPS_DMI_MATCH_INVERT(vendor, model, axes) { \
.ident = vendor " " model, \
.callback = hdaps_dmi_match_invert, \
+ .driver_data = (void *)axes, \
.matches = { \
DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_MATCH(DMI_PRODUCT_VERSION, model) \
} \
}
+#define HDAPS_DMI_MATCH_NORMAL(vendor, model) \
+ HDAPS_DMI_MATCH_INVERT(vendor, model, 0)
+
/* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
"ThinkPad T42p", so the order of the entries matters.
If your ThinkPad is not recognized, please update to latest
BIOS. This is especially the case for some R52 ThinkPads. */
static struct dmi_system_id __initdata hdaps_whitelist[] = {
- HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p", HDAPS_BOTH_AXES),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
- HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p", HDAPS_BOTH_AXES),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
- HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p", HDAPS_BOTH_AXES),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
- HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61", HDAPS_BOTH_AXES),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
- HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
- HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad X41", HDAPS_Y_AXIS),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61", HDAPS_BOTH_AXES),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m", HDAPS_BOTH_AXES),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p", HDAPS_BOTH_AXES),
{ .ident = NULL }
};
static int __init hdaps_init(void)
{
+ struct input_dev *idev;
int ret;
if (!dmi_check_system(hdaps_whitelist)) {
if (ret)
goto out_device;
- hdaps_idev = input_allocate_device();
+ hdaps_idev = input_allocate_polled_device();
if (!hdaps_idev) {
ret = -ENOMEM;
goto out_group;
}
+ hdaps_idev->poll = hdaps_mousedev_poll;
+ hdaps_idev->poll_interval = HDAPS_POLL_INTERVAL;
+
/* initial calibrate for the input device */
hdaps_calibrate();
/* initialize the input class */
- hdaps_idev->name = "hdaps";
- hdaps_idev->cdev.dev = &pdev->dev;
- hdaps_idev->evbit[0] = BIT(EV_ABS);
- input_set_abs_params(hdaps_idev, ABS_X,
+ idev = hdaps_idev->input;
+ idev->name = "hdaps";
+ idev->phys = "isa1600/input0";
+ idev->id.bustype = BUS_ISA;
+ idev->dev.parent = &pdev->dev;
+ idev->evbit[0] = BIT_MASK(EV_ABS);
+ input_set_abs_params(idev, ABS_X,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- input_set_abs_params(hdaps_idev, ABS_Y,
+ input_set_abs_params(idev, ABS_Y,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- ret = input_register_device(hdaps_idev);
+ ret = input_register_polled_device(hdaps_idev);
if (ret)
goto out_idev;
- /* start up our timer for the input device */
- init_timer(&hdaps_timer);
- hdaps_timer.function = hdaps_mousedev_poll;
- hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
- add_timer(&hdaps_timer);
-
printk(KERN_INFO "hdaps: driver successfully loaded.\n");
return 0;
out_idev:
- input_free_device(hdaps_idev);
+ input_free_polled_device(hdaps_idev);
out_group:
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
out_device:
static void __exit hdaps_exit(void)
{
- del_timer_sync(&hdaps_timer);
- input_unregister_device(hdaps_idev);
+ input_unregister_polled_device(hdaps_idev);
+ input_free_polled_device(hdaps_idev);
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
platform_device_unregister(pdev);
platform_driver_unregister(&hdaps_driver);
module_init(hdaps_init);
module_exit(hdaps_exit);
-module_param_named(invert, hdaps_invert, bool, 0);
-MODULE_PARM_DESC(invert, "invert data along each axis");
+module_param_named(invert, hdaps_invert, int, 0);
+MODULE_PARM_DESC(invert, "invert data along each axis. 1 invert x-axis, "
+ "2 invert y-axis, 3 invert both axes.");
MODULE_AUTHOR("Robert Love");
MODULE_DESCRIPTION("IBM Hard Drive Active Protection System (HDAPS) driver");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff