MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(gl520sm);
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
/* Many GL520 constants specified below
One of the inputs can be configured as either temp or voltage.
* Function declarations
*/
-static int gl520_attach_adapter(struct i2c_adapter *adapter);
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl520_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info);
static void gl520_init_client(struct i2c_client *client);
-static int gl520_detach_client(struct i2c_client *client);
+static int gl520_remove(struct i2c_client *client);
static int gl520_read_value(struct i2c_client *client, u8 reg);
static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl520_data *gl520_update_device(struct device *dev);
/* Driver data */
+static const struct i2c_device_id gl520_id[] = {
+ { "gl520sm", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gl520_id);
+
static struct i2c_driver gl520_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "gl520sm",
},
- .attach_adapter = gl520_attach_adapter,
- .detach_client = gl520_detach_client,
+ .probe = gl520_probe,
+ .remove = gl520_remove,
+ .id_table = gl520_id,
+ .detect = gl520_detect,
+ .address_list = normal_i2c,
};
/* Client data */
struct gl520_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until the following fields are valid */
static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
get_beep_mask, set_beep_mask);
+static ssize_t get_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bit_nr = to_sensor_dev_attr(attr)->index;
+ struct gl520_data *data = gl520_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->alarms >> bit_nr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, get_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, get_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, get_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, get_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, get_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, get_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, get_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, get_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, get_alarm, NULL, 7);
+
+static ssize_t get_beep(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct gl520_data *data = gl520_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1);
+}
+
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gl520_data *data = i2c_get_clientdata(client);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ unsigned long bit;
+
+ bit = simple_strtoul(buf, NULL, 10);
+ if (bit & ~1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+ if (bit)
+ data->beep_mask |= (1 << bitnr);
+ else
+ data->beep_mask &= ~(1 << bitnr);
+ gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 3);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 4);
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 5);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 6);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 7);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 7);
+
static struct attribute *gl520_attributes[] = {
&dev_attr_cpu0_vid.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_beep.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_beep.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_beep.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_beep.dev_attr.attr,
&dev_attr_fan1_off.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_beep.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_beep.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_beep_enable.attr,
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_beep.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_beep.dev_attr.attr,
NULL
};
* Real code
*/
-static int gl520_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, gl520_detect);
-}
-
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct gl520_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
+ return -ENODEV;
+
+ /* Determine the chip type. */
+ if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
+ ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+ ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
+ dev_dbg(&client->dev, "Unknown chip type, skipping\n");
+ return -ENODEV;
+ }
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access gl520_{read,write}_value. */
+ strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int gl520_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gl520_data *data;
+ int err;
- if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &gl520_driver;
-
- /* Determine the chip type. */
- if (kind < 0) {
- if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
- ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
- ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
- dev_dbg(&client->dev, "Unknown chip type, skipping\n");
- goto exit_free;
- }
- }
-
- /* Fill in the remaining client fields */
- strlcpy(client->name, "gl520sm", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
/* Initialize the GL520SM chip */
gl520_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group)))
- goto exit_detach;
+ goto exit_free;
if (data->two_temps) {
if ((err = device_create_file(&client->dev,
|| (err = device_create_file(&client->dev,
&sensor_dev_attr_temp2_max.dev_attr))
|| (err = device_create_file(&client->dev,
- &sensor_dev_attr_temp2_max_hyst.dev_attr)))
+ &sensor_dev_attr_temp2_max_hyst.dev_attr))
+ || (err = device_create_file(&client->dev,
+ &sensor_dev_attr_temp2_alarm.dev_attr))
+ || (err = device_create_file(&client->dev,
+ &sensor_dev_attr_temp2_beep.dev_attr)))
goto exit_remove_files;
} else {
if ((err = device_create_file(&client->dev,
|| (err = device_create_file(&client->dev,
&sensor_dev_attr_in4_min.dev_attr))
|| (err = device_create_file(&client->dev,
- &sensor_dev_attr_in4_max.dev_attr)))
+ &sensor_dev_attr_in4_max.dev_attr))
+ || (err = device_create_file(&client->dev,
+ &sensor_dev_attr_in4_alarm.dev_attr))
+ || (err = device_create_file(&client->dev,
+ &sensor_dev_attr_in4_beep.dev_attr)))
goto exit_remove_files;
}
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &gl520_group);
sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
}
-static int gl520_detach_client(struct i2c_client *client)
+static int gl520_remove(struct i2c_client *client)
{
struct gl520_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl520_group);
sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff