* We did not keep that part of the original driver in the Linux 2.6
* version, since it was making the driver significantly more complex
* with no real benefit.
- *
- * History:
- * 2004-01-28 Original port. (Hong-Gunn Chew)
- * 2004-01-31 Code review and approval. (Jean Delvare)
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-/* Insmod parameters */
-SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
+enum chips { gl518sm_r00, gl518sm_r80 };
/* Many GL518 constants specified below */
long rpmdiv;
if (rpm == 0)
return 0;
- rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
- return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
+ rpmdiv = SENSORS_LIMIT(rpm, 1, 960000) * div;
+ return SENSORS_LIMIT((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
}
-#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div))))
+#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val)*(div))))
#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
#define IN_FROM_REG(val) ((val)*19)
#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
#define VDD_FROM_REG(val) (((val)*95+2)/4)
-#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3)
#define DIV_FROM_REG(val) (1 << (val))
#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
/* Each client has this additional data */
struct gl518_data {
- struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 voltage_in[4]; /* Register values; [0] = VDD */
u8 voltage_min[4]; /* Register values; [0] = VDD */
u8 voltage_max[4]; /* Register values; [0] = VDD */
- u8 iter_voltage_in[4]; /* Register values; [0] = VDD */
u8 fan_in[2];
u8 fan_min[2];
u8 fan_div[2]; /* Register encoding, shifted right */
u8 temp_max; /* Register values */
u8 temp_hyst; /* Register values */
u8 alarms; /* Register value */
- u8 alarm_mask; /* Register value */
+ u8 alarm_mask;
u8 beep_mask; /* Register value */
u8 beep_enable; /* Boolean */
};
-static int gl518_attach_adapter(struct i2c_adapter *adapter);
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl518_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info);
static void gl518_init_client(struct i2c_client *client);
-static int gl518_detach_client(struct i2c_client *client);
+static int gl518_remove(struct i2c_client *client);
static int gl518_read_value(struct i2c_client *client, u8 reg);
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl518_data *gl518_update_device(struct device *dev);
+static const struct i2c_device_id gl518_id[] = {
+ { "gl518sm", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gl518_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
- .owner = THIS_MODULE,
- .name = "gl518sm",
- .id = I2C_DRIVERID_GL518,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = gl518_attach_adapter,
- .detach_client = gl518_detach_client,
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "gl518sm",
+ },
+ .probe = gl518_probe,
+ .remove = gl518_remove,
+ .id_table = gl518_id,
+ .detect = gl518_detect,
+ .address_list = normal_i2c,
};
/*
return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
}
-#define show_fan(suffix, value, index) \
-static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct gl518_data *data = gl518_update_device(dev); \
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \
- DIV_FROM_REG(data->fan_div[index]))); \
-}
-
show(TEMP, temp_input1, temp_in);
show(TEMP, temp_max1, temp_max);
show(TEMP, temp_hyst1, temp_hyst);
show(BOOL, fan_auto1, fan_auto1);
-show_fan(fan_input1, fan_in, 0);
-show_fan(fan_input2, fan_in, 1);
-show_fan(fan_min1, fan_min, 0);
-show_fan(fan_min2, fan_min, 1);
-show(DIV, fan_div1, fan_div[0]);
-show(DIV, fan_div2, fan_div[1]);
show(VDD, in_input0, voltage_in[0]);
show(IN, in_input1, voltage_in[1]);
show(IN, in_input2, voltage_in[2]);
show(BOOL, beep_enable, beep_enable);
show(BEEP_MASK, beep_mask, beep_mask);
+static ssize_t show_fan_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct gl518_data *data = gl518_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct gl518_data *data = gl518_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct gl518_data *data = gl518_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
#define set(type, suffix, value, reg) \
static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
struct gl518_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = type##_TO_REG(val); \
gl518_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
int regvalue; \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
regvalue = gl518_read_value(client, reg); \
data->value = type##_TO_REG(val); \
regvalue = (regvalue & ~mask) | (data->value << shift); \
gl518_write_value(client, reg, regvalue); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
-set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
-set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
-static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
+ int nr = to_sensor_dev_attr(attr)->index;
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
- data->fan_min[0] = FAN_TO_REG(val,
- DIV_FROM_REG(data->fan_div[0]));
- regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ regvalue = (regvalue & (0xff << (8 * nr)))
+ | (data->fan_min[nr] << (8 * (1 - nr)));
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
- if (data->fan_min[0] == 0)
- data->alarm_mask &= ~0x20;
+ if (data->fan_min[nr] == 0)
+ data->alarm_mask &= ~(0x20 << nr);
else
- data->alarm_mask |= 0x20;
+ data->alarm_mask |= (0x20 << nr);
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
+ int nr = to_sensor_dev_attr(attr)->index;
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
- regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
- data->fan_min[1] = FAN_TO_REG(val,
- DIV_FROM_REG(data->fan_div[1]));
- regvalue = (regvalue & 0xff00) | data->fan_min[1];
- gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
-
- data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
- if (data->fan_min[1] == 0)
- data->alarm_mask &= ~0x40;
- else
- data->alarm_mask |= 0x40;
- data->beep_mask &= data->alarm_mask;
- gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+ switch (val) {
+ case 1: val = 0; break;
+ case 2: val = 1; break;
+ case 4: val = 2; break;
+ case 8: val = 3; break;
+ default:
+ dev_err(dev, "Invalid fan clock divider %lu, choose one "
+ "of 1, 2, 4 or 8\n", val);
+ return -EINVAL;
+ }
- up(&data->update_lock);
+ mutex_lock(&data->update_lock);
+ regvalue = gl518_read_value(client, GL518_REG_MISC);
+ data->fan_div[nr] = val;
+ regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
+ | (data->fan_div[nr] << (6 - 2 * nr));
+ gl518_write_value(client, GL518_REG_MISC, regvalue);
+ mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
show_temp_hyst1, set_temp_hyst1);
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
-static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
-static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
-static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
-static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
-static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
-static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO,
+ show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO,
+ show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO,
+ show_fan_div, set_fan_div, 0);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO,
+ show_fan_div, set_fan_div, 1);
static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
show_beep_mask, set_beep_mask);
-/*
- * Real code
- */
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct gl518_data *data = gl518_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
-static int gl518_attach_adapter(struct i2c_adapter *adapter)
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, gl518_detect);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct gl518_data *data = gl518_update_device(dev);
+ return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
}
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- int i;
- struct i2c_client *new_client;
- struct gl518_data *data;
- int err = 0;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gl518_data *data = i2c_get_clientdata(client);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ unsigned long bit;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
+ bit = simple_strtoul(buf, NULL, 10);
+ if (bit & ~1)
+ return -EINVAL;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access gl518_{read,write}_value. */
+ mutex_lock(&data->update_lock);
+ data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+ if (bit)
+ data->beep_mask |= (1 << bitnr);
+ else
+ data->beep_mask &= ~(1 << bitnr);
+ gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
- if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- memset(data, 0, sizeof(struct gl518_data));
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 3);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 4);
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 5);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 6);
+
+static struct attribute *gl518_attributes[] = {
+ &dev_attr_in3_input.attr,
+ &dev_attr_in0_min.attr,
+ &dev_attr_in1_min.attr,
+ &dev_attr_in2_min.attr,
+ &dev_attr_in3_min.attr,
+ &dev_attr_in0_max.attr,
+ &dev_attr_in1_max.attr,
+ &dev_attr_in2_max.attr,
+ &dev_attr_in3_max.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
+ &sensor_dev_attr_in1_beep.dev_attr.attr,
+ &sensor_dev_attr_in2_beep.dev_attr.attr,
+ &sensor_dev_attr_in3_beep.dev_attr.attr,
+
+ &dev_attr_fan1_auto.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_beep.dev_attr.attr,
+ &sensor_dev_attr_fan2_beep.dev_attr.attr,
+
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_max.attr,
+ &dev_attr_temp1_max_hyst.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_beep.dev_attr.attr,
+
+ &dev_attr_alarms.attr,
+ &dev_attr_beep_enable.attr,
+ &dev_attr_beep_mask.attr,
+ NULL
+};
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
+static const struct attribute_group gl518_group = {
+ .attrs = gl518_attributes,
+};
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &gl518_driver;
- new_client->flags = 0;
+static struct attribute *gl518_attributes_r80[] = {
+ &dev_attr_in0_input.attr,
+ &dev_attr_in1_input.attr,
+ &dev_attr_in2_input.attr,
+ NULL
+};
- /* Now, we do the remaining detection. */
+static const struct attribute_group gl518_group_r80 = {
+ .attrs = gl518_attributes_r80,
+};
- if (kind < 0) {
- if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
- || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
- goto exit_free;
- }
+/*
+ * Real code
+ */
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int rev;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ /* Now, we do the remaining detection. */
+ if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
+ || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
+ return -ENODEV;
/* Determine the chip type. */
- if (kind <= 0) {
- i = gl518_read_value(new_client, GL518_REG_REVISION);
- if (i == 0x00) {
- kind = gl518sm_r00;
- } else if (i == 0x80) {
- kind = gl518sm_r80;
- } else {
- if (kind <= 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown "
- "chip at adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- goto exit_free;
- }
- }
+ rev = gl518_read_value(client, GL518_REG_REVISION);
+ if (rev != 0x00 && rev != 0x80)
+ return -ENODEV;
- /* Fill in the remaining client fields */
- strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
- data->type = kind;
- data->valid = 0;
- init_MUTEX(&data->update_lock);
+ strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+ return 0;
+}
+
+static int gl518_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gl518_data *data;
+ int err, revision;
+
+ data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ revision = gl518_read_value(client, GL518_REG_REVISION);
+ data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
+ mutex_init(&data->update_lock);
/* Initialize the GL518SM chip */
data->alarm_mask = 0xff;
- data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
- gl518_init_client((struct i2c_client *) new_client);
+ gl518_init_client(client);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
- goto exit_detach;
+ if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group)))
+ goto exit_free;
+ if (data->type == gl518sm_r80)
+ if ((err = sysfs_create_group(&client->dev.kobj,
+ &gl518_group_r80)))
+ goto exit_remove_files;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
}
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_fan1_auto);
- device_create_file(&new_client->dev, &dev_attr_fan1_input);
- device_create_file(&new_client->dev, &dev_attr_fan2_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_min);
- device_create_file(&new_client->dev, &dev_attr_fan2_min);
- device_create_file(&new_client->dev, &dev_attr_fan1_div);
- device_create_file(&new_client->dev, &dev_attr_fan2_div);
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
- device_create_file(&new_client->dev, &dev_attr_alarms);
- device_create_file(&new_client->dev, &dev_attr_beep_enable);
- device_create_file(&new_client->dev, &dev_attr_beep_mask);
-
return 0;
-/* OK, this is not exactly good programming practice, usually. But it is
- very code-efficient in this case. */
-
-exit_detach:
- i2c_detach_client(new_client);
+exit_remove_files:
+ sysfs_remove_group(&client->dev.kobj, &gl518_group);
+ if (data->type == gl518sm_r80)
+ sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
exit_free:
kfree(data);
exit:
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
}
-static int gl518_detach_client(struct i2c_client *client)
+static int gl518_remove(struct i2c_client *client)
{
struct gl518_data *data = i2c_get_clientdata(client);
- int err;
- hwmon_device_unregister(data->class_dev);
-
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &gl518_group);
+ if (data->type == gl518sm_r80)
+ sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
kfree(data);
return 0;
}
-/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
GL518 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int gl518_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
return i2c_smbus_read_byte_data(client, reg);
}
-/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
- GL518 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
struct gl518_data *data = i2c_get_clientdata(client);
int val;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff