#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/mutex.h>
#include "lm75.h"
/*
static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_INSMOD_1(asb100);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
/* TEMP: 0.001C/bit (-128C to +127C)
REG: 1C/bit, two's complement */
-static u8 TEMP_TO_REG(int temp)
+static u8 TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
ntemp += (ntemp<0 ? -500 : 500);
dynamically allocated, at the same time the client itself is allocated. */
struct asb100_data {
struct i2c_client client;
- struct class_device *class_dev;
- struct semaphore lock;
+ struct device *hwmon_dev;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
/* array of 2 pointers to subclients */
static void asb100_init_client(struct i2c_client *client);
static struct i2c_driver asb100_driver = {
- .owner = THIS_MODULE,
- .name = "asb100",
+ .driver = {
+ .name = "asb100",
+ },
.id = I2C_DRIVERID_ASB100,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = asb100_attach_adapter,
.detach_client = asb100_detach_client,
};
struct asb100_data *data = i2c_get_clientdata(client); \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
sysfs_in(5);
sysfs_in(6);
-#define device_create_file_in(client, offset) do { \
- device_create_file(&client->dev, &dev_attr_in##offset##_input); \
- device_create_file(&client->dev, &dev_attr_in##offset##_min); \
- device_create_file(&client->dev, &dev_attr_in##offset##_max); \
-} while (0)
-
/* 3 Fans */
static ssize_t show_fan(struct device *dev, char *buf, int nr)
{
struct asb100_data *data = i2c_get_clientdata(client);
u32 val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
sysfs_fan(2);
sysfs_fan(3);
-#define device_create_file_fan(client, offset) do { \
- device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
- device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
- device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
-} while (0)
-
/* 4 Temp. Sensors */
static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
{
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct asb100_data *data = i2c_get_clientdata(client); \
- unsigned long val = simple_strtoul(buf, NULL, 10); \
+ long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
switch (nr) { \
case 1: case 2: \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
} \
asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
data->reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
sysfs_temp(4);
/* VID */
-#define device_create_file_temp(client, num) do { \
- device_create_file(&client->dev, &dev_attr_temp##num##_input); \
- device_create_file(&client->dev, &dev_attr_temp##num##_max); \
- device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
-} while (0)
-
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
-#define device_create_file_vid(client) \
-device_create_file(&client->dev, &dev_attr_cpu0_vid)
/* VRM */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct asb100_data *data = asb100_update_device(dev);
+ struct asb100_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
/* Alarms */
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
-#define device_create_file_vrm(client) \
-device_create_file(&client->dev, &dev_attr_vrm);
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-#define device_create_file_alarms(client) \
-device_create_file(&client->dev, &dev_attr_alarms)
/* 1 PWM */
static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf)
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm &= 0x80; /* keep the enable bit */
data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm &= 0x0f; /* keep the duty cycle bits */
data->pwm |= (val ? 0x80 : 0x00);
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
show_pwm_enable1, set_pwm_enable1);
-#define device_create_file_pwm1(client) do { \
- device_create_file(&new_client->dev, &dev_attr_pwm1); \
- device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
-} while (0)
+
+static struct attribute *asb100_attributes[] = {
+ &dev_attr_in0_input.attr,
+ &dev_attr_in0_min.attr,
+ &dev_attr_in0_max.attr,
+ &dev_attr_in1_input.attr,
+ &dev_attr_in1_min.attr,
+ &dev_attr_in1_max.attr,
+ &dev_attr_in2_input.attr,
+ &dev_attr_in2_min.attr,
+ &dev_attr_in2_max.attr,
+ &dev_attr_in3_input.attr,
+ &dev_attr_in3_min.attr,
+ &dev_attr_in3_max.attr,
+ &dev_attr_in4_input.attr,
+ &dev_attr_in4_min.attr,
+ &dev_attr_in4_max.attr,
+ &dev_attr_in5_input.attr,
+ &dev_attr_in5_min.attr,
+ &dev_attr_in5_max.attr,
+ &dev_attr_in6_input.attr,
+ &dev_attr_in6_min.attr,
+ &dev_attr_in6_max.attr,
+
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_min.attr,
+ &dev_attr_fan1_div.attr,
+ &dev_attr_fan2_input.attr,
+ &dev_attr_fan2_min.attr,
+ &dev_attr_fan2_div.attr,
+ &dev_attr_fan3_input.attr,
+ &dev_attr_fan3_min.attr,
+ &dev_attr_fan3_div.attr,
+
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_max.attr,
+ &dev_attr_temp1_max_hyst.attr,
+ &dev_attr_temp2_input.attr,
+ &dev_attr_temp2_max.attr,
+ &dev_attr_temp2_max_hyst.attr,
+ &dev_attr_temp3_input.attr,
+ &dev_attr_temp3_max.attr,
+ &dev_attr_temp3_max_hyst.attr,
+ &dev_attr_temp4_input.attr,
+ &dev_attr_temp4_max.attr,
+ &dev_attr_temp4_max_hyst.attr,
+
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ &dev_attr_alarms.attr,
+ &dev_attr_pwm1.attr,
+ &dev_attr_pwm1_enable.attr,
+
+ NULL
+};
+
+static const struct attribute_group asb100_group = {
+ .attrs = asb100_attributes,
+};
/* This function is called when:
asb100_driver is inserted (when this module is loaded), for each
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, asb100_detect);
+ return i2c_probe(adapter, &addr_data, asb100_detect);
}
static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
int i, id, err;
struct asb100_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
id = i2c_adapter_id(adapter);
struct i2c_client *new_client;
struct asb100_data *data;
- /* asb100 is SMBus only */
- if (i2c_is_isa_adapter(adapter)) {
- pr_debug("asb100.o: detect failed, "
- "cannot attach to legacy adapter!\n");
- err = -ENODEV;
- goto ERROR0;
- }
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
client structure, even though we cannot fill it completely yet.
But it allows us to access asb100_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
- pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+ if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+ pr_debug("asb100.o: detect failed, kzalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct asb100_data));
new_client = &data->client;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ if ((err = sysfs_create_group(&new_client->dev.kobj, &asb100_group)))
goto ERROR3;
- }
-
- device_create_file_in(new_client, 0);
- device_create_file_in(new_client, 1);
- device_create_file_in(new_client, 2);
- device_create_file_in(new_client, 3);
- device_create_file_in(new_client, 4);
- device_create_file_in(new_client, 5);
- device_create_file_in(new_client, 6);
-
- device_create_file_fan(new_client, 1);
- device_create_file_fan(new_client, 2);
- device_create_file_fan(new_client, 3);
-
- device_create_file_temp(new_client, 1);
- device_create_file_temp(new_client, 2);
- device_create_file_temp(new_client, 3);
- device_create_file_temp(new_client, 4);
- device_create_file_vid(new_client);
- device_create_file_vrm(new_client);
-
- device_create_file_alarms(new_client);
-
- device_create_file_pwm1(new_client);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto ERROR4;
+ }
return 0;
+ERROR4:
+ sysfs_remove_group(&new_client->dev.kobj, &asb100_group);
ERROR3:
i2c_detach_client(data->lm75[1]);
i2c_detach_client(data->lm75[0]);
int err;
/* main client */
- if (data)
- hwmon_device_unregister(data->class_dev);
+ if (data) {
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &asb100_group);
+ }
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "client deregistration failed; "
- "client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
/* main client */
if (data)
struct i2c_client *cl;
int res, bank;
- down(&data->lock);
+ mutex_lock(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
struct i2c_client *cl;
int bank;
- down(&data->lock);
+ mutex_lock(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
- up(&data->lock);
+ mutex_unlock(&data->lock);
}
static void asb100_init_client(struct i2c_client *client)
vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */
struct asb100_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "... device update complete\n");
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff