mfd: Move WM831x to generic IRQ

[safe/jmp/linux-2.6] / drivers / hwmon / asb100.c

diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8acf829..480f80e 100644 (file)
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -701,6 +701,7 @@ static int asb100_detect(struct i2c_client *client, int kind,
                         struct i2c_board_info *info)
 {
        struct i2c_adapter *adapter = client->adapter;
+       int val1, val2;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
                pr_debug("asb100.o: detect failed, "
@@ -708,50 +709,30 @@ static int asb100_detect(struct i2c_client *client, int kind,
                return -ENODEV;
        }
 
-       /* The chip may be stuck in some other bank than bank 0. This may
-          make reading other information impossible. Specify a force=... or
-          force_*=... parameter, and the chip will be reset to the right
-          bank. */
-       if (kind < 0) {
-
-               int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
-               int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-               /* If we're in bank 0 */
-               if ((!(val1 & 0x07)) &&
-                               /* Check for ASB100 ID (low byte) */
-                               (((!(val1 & 0x80)) && (val2 != 0x94)) ||
-                               /* Check for ASB100 ID (high byte ) */
-                               ((val1 & 0x80) && (val2 != 0x06)))) {
-                       pr_debug("asb100.o: detect failed, "
-                                       "bad chip id 0x%02x!\n", val2);
-                       return -ENODEV;
-               }
+       val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+       val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
 
-       } /* kind < 0 */
+       /* If we're in bank 0 */
+       if ((!(val1 & 0x07)) &&
+                       /* Check for ASB100 ID (low byte) */
+                       (((!(val1 & 0x80)) && (val2 != 0x94)) ||
+                       /* Check for ASB100 ID (high byte ) */
+                       ((val1 & 0x80) && (val2 != 0x06)))) {
+               pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+               return -ENODEV;
+       }
 
-       /* We have either had a force parameter, or we have already detected
-          Winbond. Put it now into bank 0 and Vendor ID High Byte */
+       /* Put it now into bank 0 and Vendor ID High Byte */
        i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
                (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
                | 0x80);
 
        /* Determine the chip type. */
-       if (kind <= 0) {
-               int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
-               int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-               if ((val1 == 0x31) && (val2 == 0x06))
-                       kind = asb100;
-               else {
-                       if (kind == 0)
-                               dev_warn(&adapter->dev, "ignoring "
-                                       "'force' parameter for unknown chip "
-                                       "at adapter %d, address 0x%02x.\n",
-                                       i2c_adapter_id(adapter), client->addr);
-                       return -ENODEV;
-               }
-       }
+       val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+       val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+
+       if (val1 != 0x31 || val2 != 0x06)
+               return -ENODEV;
 
        strlcpy(info->type, "asb100", I2C_NAME_SIZE);