* adm1025.c
*
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
*
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
* voltages (including its own power source) and up to two temperatures
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
* NE1619 has two possible addresses: 0x2c and 0x2d.
*/
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/*
* Insmod parameters
*/
#define ADM1025_REG_MAN_ID 0x3E
-#define ADM1025_REG_CHIP_ID 0x3F
+#define ADM1025_REG_CHIP_ID 0x3F
#define ADM1025_REG_CONFIG 0x40
#define ADM1025_REG_STATUS1 0x41
#define ADM1025_REG_STATUS2 0x42
* The ADM1025 uses signed 8-bit values for temperatures.
*/
-static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
+static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192)
#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \
* Functions declaration
*/
-static int adm1025_attach_adapter(struct i2c_adapter *adapter);
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1025_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1025_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void adm1025_init_client(struct i2c_client *client);
-static int adm1025_detach_client(struct i2c_client *client);
+static int adm1025_remove(struct i2c_client *client);
static struct adm1025_data *adm1025_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id adm1025_id[] = {
+ { "adm1025", adm1025 },
+ { "ne1619", ne1619 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1025_id);
+
static struct i2c_driver adm1025_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1025",
},
- .id = I2C_DRIVERID_ADM1025,
- .attach_adapter = adm1025_attach_adapter,
- .detach_client = adm1025_detach_client,
+ .probe = adm1025_probe,
+ .remove = adm1025_remove,
+ .id_table = adm1025_id,
+ .detect = adm1025_detect,
+ .address_data = &addr_data,
};
/*
*/
struct adm1025_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
* Sysfs stuff
*/
-#define show_in(offset) \
-static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
- in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
- in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
- in_scale[offset])); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
-show_in(0);
-show_in(1);
-show_in(2);
-show_in(3);
-show_in(4);
-show_in(5);
-
-#define show_temp(offset) \
-static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
-} \
-static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
-} \
-static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1025_data *data = adm1025_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
-}\
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
-show_temp(1);
-show_temp(2);
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in[index],
+ in_scale[index]));
+}
+
+static ssize_t
+show_in_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[index],
+ in_scale[index]));
+}
+
+static ssize_t
+show_in_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[index],
+ in_scale[index]));
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[index]));
+}
+
+static ssize_t
+show_temp_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[index]));
+}
+
+static ssize_t
+show_temp_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1025_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->in_min[index] = IN_TO_REG(val, in_scale[index]);
+ i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(index),
+ data->in_min[index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1025_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->in_max[index] = IN_TO_REG(val, in_scale[index]);
+ i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(index),
+ data->in_max[index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
#define set_in(offset) \
-static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1025_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
- i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
- data->in_min[offset]); \
- mutex_unlock(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1025_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
- i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
- data->in_max[offset]); \
- mutex_unlock(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
- show_in##offset##_max, set_in##offset##_max);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+ show_in_max, set_in_max, offset)
set_in(0);
set_in(1);
set_in(2);
set_in(4);
set_in(5);
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1025_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[index] = TEMP_TO_REG(val);
+ i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(index),
+ data->temp_min[index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1025_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[index] = TEMP_TO_REG(val);
+ i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(index),
+ data->temp_max[index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
#define set_temp(offset) \
-static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1025_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->temp_min[offset-1] = TEMP_TO_REG(val); \
- i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
- data->temp_min[offset-1]); \
- mutex_unlock(&data->update_lock); \
- return count; \
-} \
-static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1025_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->temp_max[offset-1] = TEMP_TO_REG(val); \
- i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
- data->temp_max[offset-1]); \
- mutex_unlock(&data->update_lock); \
- return count; \
-} \
-static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
- show_temp##offset##_min, set_temp##offset##_min); \
-static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
- show_temp##offset##_max, set_temp##offset##_max);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+ show_temp_min, set_temp_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+ show_temp_max, set_temp_max, offset - 1)
set_temp(1);
set_temp(2);
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1025_data *data = adm1025_update_device(dev);
return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct adm1025_data *data = adm1025_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
+
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1025_data *data = adm1025_update_device(dev);
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
-static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1025_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
-static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct adm1025_data *data = i2c_get_clientdata(client);
+ struct adm1025_data *data = dev_get_drvdata(dev);
data->vrm = simple_strtoul(buf, NULL, 10);
return count;
}
* Real code
*/
-static int adm1025_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm1025_detect);
-}
-
static struct attribute *adm1025_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
- &dev_attr_in3_input.attr,
- &dev_attr_in5_input.attr,
- &dev_attr_in0_min.attr,
- &dev_attr_in1_min.attr,
- &dev_attr_in2_min.attr,
- &dev_attr_in3_min.attr,
- &dev_attr_in5_min.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in1_max.attr,
- &dev_attr_in2_max.attr,
- &dev_attr_in3_max.attr,
- &dev_attr_in5_max.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp2_min.attr,
- &dev_attr_temp1_max.attr,
- &dev_attr_temp2_max.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_cpu0_vid.attr,
&dev_attr_vrm.attr,
.attrs = adm1025_attributes,
};
-static struct attribute *adm1025_attributes_opt[] = {
- &dev_attr_in4_input.attr,
- &dev_attr_in4_min.attr,
- &dev_attr_in4_max.attr,
+static struct attribute *adm1025_attributes_in4[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
NULL
};
-static const struct attribute_group adm1025_group_opt = {
- .attrs = adm1025_attributes_opt,
+static const struct attribute_group adm1025_group_in4 = {
+ .attrs = adm1025_attributes_in4,
};
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1025_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct adm1025_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
const char *name = "";
u8 config;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- ADM1025-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &adm1025_driver;
- new_client->flags = 0;
+ return -ENODEV;
/*
* Now we do the remaining detection. A negative kind means that
* requested, so both the detection and the identification steps
* are skipped.
*/
- config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
+ config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
if (kind < 0) { /* detection */
if ((config & 0x80) != 0x00
- || (i2c_smbus_read_byte_data(new_client,
+ || (i2c_smbus_read_byte_data(client,
ADM1025_REG_STATUS1) & 0xC0) != 0x00
- || (i2c_smbus_read_byte_data(new_client,
+ || (i2c_smbus_read_byte_data(client,
ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
dev_dbg(&adapter->dev,
"ADM1025 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ client->addr);
+ return -ENODEV;
}
}
if (kind <= 0) { /* identification */
u8 man_id, chip_id;
- man_id = i2c_smbus_read_byte_data(new_client,
- ADM1025_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- ADM1025_REG_CHIP_ID);
-
+ man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+
if (man_id == 0x41) { /* Analog Devices */
if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
kind = adm1025;
}
} else
if (man_id == 0xA1) { /* Philips */
- if (address != 0x2E
+ if (client->addr != 0x2E
&& (chip_id & 0xF0) == 0x20) { /* NE1619 */
kind = ne1619;
}
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
} else if (kind == ne1619) {
name = "ne1619";
}
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->valid = 0;
- mutex_init(&data->update_lock);
+ return 0;
+}
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+static int adm1025_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1025_data *data;
+ int err;
+ u8 config;
+
+ data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
/* Initialize the ADM1025 chip */
- adm1025_init_client(new_client);
+ adm1025_init_client(client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1025_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group)))
+ goto exit_free;
/* Pin 11 is either in4 (+12V) or VID4 */
+ config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
if (!(config & 0x20)) {
- if ((err = device_create_file(&new_client->dev,
- &dev_attr_in4_input))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_min))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_max)))
+ if ((err = sysfs_create_group(&client->dev.kobj,
+ &adm1025_group_in4)))
goto exit_remove;
}
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
return 0;
exit_remove:
- sysfs_remove_group(&new_client->dev.kobj, &adm1025_group);
- sysfs_remove_group(&new_client->dev.kobj, &adm1025_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&client->dev.kobj, &adm1025_group);
+ sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
exit_free:
kfree(data);
exit:
(reg&0x7E)|0x01);
}
-static int adm1025_detach_client(struct i2c_client *client)
+static int adm1025_remove(struct i2c_client *client)
{
struct adm1025_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1025_group);
- sysfs_remove_group(&client->dev.kobj, &adm1025_group_opt);
-
- if ((err = i2c_detach_client(client)))
- return err;
+ sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
kfree(data);
return 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff