tristate
default n
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
+ default n
+ help
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
+comment "Native drivers"
+
config SENSORS_ABITUGURU
- tristate "Abit uGuru"
- depends on EXPERIMENTAL
+ tristate "Abit uGuru (rev 1 & 2)"
+ depends on X86 && EXPERIMENTAL
help
- If you say yes here you get support for the Abit uGuru chips
- sensor part. The voltage and frequency control parts of the Abit
- uGuru are not supported. The Abit uGuru chip can be found on Abit
- uGuru featuring motherboards (most modern Abit motherboards).
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
This driver can also be built as a module. If so, the module
will be called abituguru.
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7414 temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called ad7418.
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7462
+ tristate "Analog Devices ADT7462"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7462 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7462.
+
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
+config SENSORS_ADT7473
+ tristate "Analog Devices ADT7473 (DEPRECATED)"
+ depends on I2C && EXPERIMENTAL
+ select SENSORS_ADT7475
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7473 temperature monitoring chips.
+
+ This driver is deprecated, you should use the adt7475 driver
+ instead.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7473.
+
+config SENSORS_ADT7475
+ tristate "Analog Devices ADT7473, ADT7475 and ADT7490"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7473, ADT7475 and ADT7490 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called adt7475.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ select INPUT_POLLDEV
help
Support for the motion sensor included in PowerBooks. Includes
implementations for PMU and I2C.
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
+ depends on X86 && I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_I5K_AMB
+ tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for FB-DIMM AMB temperature
+ monitoring chips on systems with the Intel 5000 series chipset.
+
+ This driver can also be built as a module. If so, the module
+ will be called i5k_amb.
+
config SENSORS_F71805F
- tristate "Fintek F71805F/FG and F71872F/FG"
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG and F71872F/FG Super-I/O
- chips.
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
-config SENSORS_FSCHER
- tristate "FSC Hermes"
- depends on I2C
+config SENSORS_F71882FG
+ tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+ depends on EXPERIMENTAL
help
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+ F71889FG and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
- will be called fscher.
+ will be called f71882fg.
-config SENSORS_FSCPOS
- tristate "FSC Poseidon"
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP and F75373";
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP and F75373
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
+config SENSORS_FSCHMD
+ tristate "Fujitsu Siemens Computers sensor chips"
+ depends on X86 && I2C
+ help
+ If you say yes here you get support for the following Fujitsu
+ Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
+ Heimdall, Heracles, Hades and Syleus including support for the
+ integrated watchdog.
+
+ This is a merged driver for FSC sensor chips replacing the fscpos,
+ fscscy and fscher drivers and adding support for several other FSC
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
+config SENSORS_G760A
+ tristate "GMT G760A"
depends on I2C
help
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
+ If you say yes here you get support for Global Mixed-mode
+ Technology Inc G760A fan speed PWM controller chips.
This driver can also be built as a module. If so, the module
- will be called fscpos.
+ will be called g760a.
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core (2) Duo/Solo temperature sensor"
+ tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Supported all are all known variants
- of Intel Core family.
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check documentation/driver for details.
+
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HC10/HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3350, x3550, x3650,
+ x3655, and x3755; the x3800, x3850, and x3950 models that have
+ PCI Express; and some of the HS2x, LS2x, and QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
- depends on I2C
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F and IT8718F sensor chips, and the SiS960 clone.
+ IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
+ SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
will be called lm63.
config SENSORS_LM70
- tristate "National Semiconductor LM70"
+ tristate "National Semiconductor LM70 / Texas Instruments TMP121"
depends on SPI_MASTER && EXPERIMENTAL
help
If you say yes here you get support for the National Semiconductor
- LM70 digital temperature sensor chip.
+ LM70 and Texas Instruments TMP121/TMP123 digital temperature
+ sensor chips.
This driver can also be built as a module. If so, the module
will be called lm70.
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
+
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
+ - Dallas Semiconductor DS75 and DS1775
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+ This driver supports driver model based binding through board
+ specific I2C device tables.
+
+ It also supports the "legacy" style of driver binding. To use
+ that with some chips which don't replicate LM75 quirks exactly,
+ you may need the "force" module parameter.
This driver can also be built as a module. If so, the module
will be called lm75.
will be called lm85.
config SENSORS_LM87
- tristate "National Semiconductor LM87"
+ tristate "National Semiconductor LM87 and compatibles"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
- sensor chips.
+ and Analog Devices ADM1024 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm87.
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
-
- The Analog Devices ADT7461 sensor chip is also supported, but only
- if found in ADM1032 compatibility mode.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+ MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681 and MAX6692 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
This driver can also be built as a module. If so, the module
will be called lm92.
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
+config SENSORS_LTC4215
+ tristate "Linear Technology LTC4215"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4215
+ Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4215.
+
+config SENSORS_LTC4245
+ tristate "Linear Technology LTC4245"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4245
+ Multiple Supply Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4245.
+
+config SENSORS_LM95241
+ tristate "National Semiconductor LM95241 sensor chip"
+ depends on I2C
+ help
+ If you say yes here you get support for LM95241 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm95241.
+
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
This driver can also be built as a module. If so, the module
will be called pc87427.
+config SENSORS_PCF8591
+ tristate "Philips PCF8591 ADC/DAC"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for Philips PCF8591 4-channel
+ ADC, 1-channel DAC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called pcf8591.
+
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
+config SENSORS_S3C
+ tristate "S3C24XX/S3C64XX Inbuilt ADC"
+ depends on ARCH_S3C2410
+ help
+ If you say yes here you get support for the on-board ADCs of
+ the Samsung S3C24XX or S3C64XX series of SoC
+
+ This driver can also be built as a module. If so, the module
+ will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+ bool "Include raw channel attributes in sysfs"
+ depends on SENSORS_S3C
+ help
+ Say Y here if you want to include raw copies of all the ADC
+ channels in sysfs.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_DME1737
+ tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+ Asus A8000 Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_ADS7828
+ tristate "Texas Instruments ADS7828"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS7828
+ 12-bit 8-channel ADC device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ads7828.
+
+config SENSORS_THMC50
+ tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments THMC50
+ sensor chips and clones: the Analog Devices ADM1022.
+
+ This driver can also be built as a module. If so, the module
+ will be called thmc50.
+
+config SENSORS_TMP401
+ tristate "Texas Instruments TMP401 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP401 and
+ TMP411 temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp401.
+
+config SENSORS_TMP421
+ tristate "Texas Instruments TMP421 and compatible"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP421,
+ TMP422 and TMP423 temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp421.
+
config SENSORS_VIA686A
tristate "VIA686A"
- depends on I2C && PCI
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI
select HWMON_VID
- select I2C_ISA
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
will be called vt8231.
config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+ tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
- of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
- and the similar Asus AS99127F.
+ of sensor chips: the W83781D, W83782D and W83783S, and the similar
+ Asus AS99127F.
This driver can also be built as a module. If so, the module
will be called w83781d.
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
This driver can also be built as a module. If so, the module
will be called w83l785ts.
+config SENSORS_W83L786NG
+ tristate "Winbond W83L786NG, W83L786NR"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83L786NG
+ and W83L786NR sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l786ng.
+
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
select HWMON_VID
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
+ tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
+ select HWMON_VID
help
- If you say yes here you get preliminary support for the hardware
+ If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
This driver also supports the W83627EHG, which is the lead-free
- version of the W83627EHF.
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo.
+
+ This driver also supports the W83667HG chip.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+ tristate "Wolfson Microelectronics WM835x"
+ depends on MFD_WM8350
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the WM835x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm8350-hwmon.
+
+config SENSORS_ULTRA45
+ tristate "Sun Ultra45 PIC16F747"
+ depends on SPARC64
+ help
+ This driver provides support for the Ultra45 workstation environmental
+ sensors.
+
config SENSORS_HDAPS
tristate "IBM Hard Drive Active Protection System (hdaps)"
depends on INPUT && X86
+ select INPUT_POLLDEV
default n
help
This driver provides support for the IBM Hard Drive Active Protection
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_LIS3_SPI
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
+ depends on !ACPI && SPI_MASTER && INPUT
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via SPI. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the SPI transport
+ is called lis3lv02d_spi.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
- depends on HWMON && INPUT && X86
+ depends on INPUT && X86
select NEW_LEDS
select LEDS_CLASS
+ select INPUT_POLLDEV
default n
help
This driver provides support for the Apple System Management
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
-config HWMON_DEBUG_CHIP
- bool "Hardware Monitoring Chip debugging messages"
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783 ADC"
+ depends on MFD_MC13783
+ help
+ Support for the A/D converter on MC13783 PMIC.
+
+if ACPI
+
+comment "ACPI drivers"
+
+config SENSORS_ATK0110
+ tristate "ASUS ATK0110"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the ACPI hardware
+ monitoring interface found in many ASUS motherboards. This
+ driver will provide readings of fans, voltages and temperatures
+ through the system firmware.
+
+ This driver can also be built as a module. If so, the module
+ will be called asus_atk0110.
+
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on INPUT
+ select INPUT_POLLDEV
+ select NEW_LEDS
+ select LEDS_CLASS
default n
help
- Say Y here if you want the I2C chip drivers to produce a bunch of
- debug messages to the system log. Select this if you are having
- a problem with I2C support and want to see more of what is going
- on.
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ if the led infrastructure is activated, support for a led indicating
+ disk protection will be provided as hp:red:hddprotection.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for HP laptops will be
+ called hp_accel.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of lis3lv02d.
+
+endif # ACPI
endif # HWMON