config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on HWMON && EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7414 temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called ad7418.
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7462
+ tristate "Analog Devices ADT7462"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7462 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7462.
+
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
+config SENSORS_ADT7473
+ tristate "Analog Devices ADT7473"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7473 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7473.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ select INPUT_POLLDEV
help
Support for the motion sensor included in PowerBooks. Includes
implementations for PMU and I2C.
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
+ depends on X86 && I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_I5K_AMB
+ tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for FB-DIMM AMB temperature
+ monitoring chips on systems with the Intel 5000 series chipset.
+
+ This driver can also be built as a module. If so, the module
+ will be called i5k_amb.
+
config SENSORS_F71805F
- tristate "Fintek F71805F/FG and F71872F/FG"
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG and F71872F/FG Super-I/O
- chips.
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
+config SENSORS_F71882FG
+ tristate "Fintek F71862FG, F71882FG and F8000"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+ and F8000 Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71882fg.
+
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP and F75373";
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP and F75373
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
config SENSORS_FSCHER
tristate "FSC Hermes"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
will be called fscpos.
+config SENSORS_FSCHMD
+ tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+ depends on X86 && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for various Fujitsu Siemens
+ Computers sensor chips.
+
+ This is a new merged driver for FSC sensor chips which is intended
+ as a replacment for the fscpos, fscscy and fscher drivers and adds
+ support for several other FCS sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on I2C
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3350, x3550, x3650,
+ x3655, and x3755; the x3800, x3850, and x3950 models that have
+ PCI Express; and some of the HS2x, LS2x, and QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
select HWMON_VID
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
+
+ - Dallas Semiconductor DS75 and DS1775
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
+ This driver supports driver model based binding through board
+ specific I2C device tables.
+
+ It also supports the "legacy" style of driver binding. To use
+ that with some chips which don't replicate LM75 quirks exactly,
+ you may need the "force" module parameter.
This driver can also be built as a module. If so, the module
will be called lm75.
will be called lm85.
config SENSORS_LM87
- tristate "National Semiconductor LM87"
+ tristate "National Semiconductor LM87 and compatibles"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
- sensor chips.
+ and Analog Devices ADM1024 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm87.
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
- MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
-
- The Analog Devices ADT7461 sensor chip is also supported, but only
- if found in ADM1032 compatibility mode.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+ MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+ MAX6681 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
config SENSORS_LM93
tristate "National Semiconductor LM93 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM93
This driver can also be built as a module. If so, the module
will be called lm93.
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
will be called sis5595.
config SENSORS_DME1737
- tristate "SMSC DME1737 and compatibles"
+ tristate "SMSC DME1737, SCH311x and compatibles"
depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the hardware monitoring
- and fan control features of the SMSC DME1737 (and compatibles
- like the Asus A8000) Super-I/O chip.
+ and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+ Asus A8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called dme1737.
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_ADS7828
+ tristate "Texas Instruments ADS7828"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS7828
+ 12-bit 8-channel ADC device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ads7828.
+
+config SENSORS_THMC50
+ tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments THMC50
+ sensor chips and clones: the Analog Devices ADM1022.
+
+ This driver can also be built as a module. If so, the module
+ will be called thmc50.
+
config SENSORS_VIA686A
tristate "VIA686A"
depends on PCI
will be called vt8231.
config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+ tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
- of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
- and the similar Asus AS99127F.
+ of sensor chips: the W83781D, W83782D and W83783S, and the similar
+ Asus AS99127F.
This driver can also be built as a module. If so, the module
will be called w83781d.
This driver can also be built as a module. If so, the module
will be called w83l785ts.
+config SENSORS_W83L786NG
+ tristate "Winbond W83L786NG, W83L786NR"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83L786NG
+ and W83L786NR sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l786ng.
+
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
select HWMON_VID
config SENSORS_W83627EHF
tristate "Winbond W83627EHF/DHG"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_ULTRA45
+ tristate "Sun Ultra45 PIC16F747"
+ depends on SPARC64
+ help
+ This driver provides support for the Ultra45 workstation environmental
+ sensors.
+
config SENSORS_HDAPS
tristate "IBM Hard Drive Active Protection System (hdaps)"
depends on INPUT && X86
+ select INPUT_POLLDEV
default n
help
This driver provides support for the IBM Hard Drive Active Protection
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on ACPI && INPUT
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ This driver can also be built as a module. If so, the module
+ will be called lis3lv02d.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
select NEW_LEDS
select LEDS_CLASS
+ select INPUT_POLLDEV
default n
help
This driver provides support for the Apple System Management