hwmon: (f71882fg) Add documentation

[safe/jmp/linux-2.6] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bf4ebfb..cc611e4 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -77,6 +77,22 @@ config SENSORS_AD7418
          This driver can also be built as a module. If so, the module
          will be called ad7418.
 
+config SENSORS_ADCXX
+       tristate "National Semiconductor ADCxxxSxxx"
+       depends on SPI_MASTER && EXPERIMENTAL
+       help
+         If you say yes here you get support for the National Semiconductor
+         ADC<bb><c>S<sss> chip family, where
+         * bb  is the resolution in number of bits (8, 10, 12)
+         * c   is the number of channels (1, 2, 4, 8)
+         * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+           kSPS and 101 for 1 MSPS)
+
+         Examples : ADC081S101, ADC124S501, ...
+
+         This driver can also be built as a module.  If so, the module
+         will be called adcxx.
+
 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
        depends on I2C
@@ -143,6 +159,16 @@ config SENSORS_ADM9240
          This driver can also be built as a module.  If so, the module
          will be called adm9240.
 
+config SENSORS_ADT7462
+       tristate "Analog Devices ADT7462"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7462 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7462.
+
 config SENSORS_ADT7470
        tristate "Analog Devices ADT7470"
        depends on I2C && EXPERIMENTAL
@@ -258,11 +284,12 @@ config SENSORS_F71805F
          will be called f71805f.
 
 config SENSORS_F71882FG
-       tristate "Fintek F71882FG and F71883FG"
+       tristate "Fintek F71862FG, F71882FG and F8000"
        depends on EXPERIMENTAL
        help
          If you say yes here you get support for hardware monitoring
-         features of the Fintek F71882FG and F71883FG Super-I/O chips.
+         features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+         and F8000 Super-I/O chips.
 
          This driver can also be built as a module.  If so, the module
          will be called f71882fg.
@@ -494,11 +521,9 @@ config SENSORS_LM90
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM90,
-         LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
-         MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
-
-         The Analog Devices ADT7461 sensor chip is also supported, but only
-         if found in ADM1032 compatibility mode.
+         LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+         MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+         MAX6681 sensor chips.
 
          This driver can also be built as a module.  If so, the module
          will be called lm90.
@@ -524,6 +549,15 @@ config SENSORS_LM93
          This driver can also be built as a module.  If so, the module
          will be called lm93.
 
+config SENSORS_MAX1111
+       tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+       depends on SPI_MASTER
+       help
+         Say y here to support Maxim's MAX1111 ADC chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called max1111.
+
 config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"
        depends on I2C
@@ -775,6 +809,13 @@ config SENSORS_W83627EHF
          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.
 
+config SENSORS_ULTRA45
+       tristate "Sun Ultra45 PIC16F747"
+       depends on SPARC64
+       help
+         This driver provides support for the Ultra45 workstation environmental
+         sensors.
+
 config SENSORS_HDAPS
        tristate "IBM Hard Drive Active Protection System (hdaps)"
        depends on INPUT && X86
@@ -795,6 +836,25 @@ config SENSORS_HDAPS
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of hdaps.
 
+config SENSORS_LIS3LV02D
+       tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+       depends on ACPI && INPUT
+       default n
+       help
+         This driver provides support for the LIS3LV02Dx accelerometer. In
+         particular, it can be found in a number of HP laptops, which have the
+         "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+         systems the driver should load automatically (via ACPI). The
+         accelerometer might also be found in other systems, connected via SPI
+         or I2C.  The accelerometer data is readable via
+         /sys/devices/platform/lis3lv02d.
+
+         This driver also provides an absolute input class device, allowing
+         the laptop to act as a pinball machine-esque joystick.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lis3lv02d.
+
 config SENSORS_APPLESMC
        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
        depends on INPUT && X86