This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7414 temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called ad7418.
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7462
+ tristate "Analog Devices ADT7462"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7462 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7462.
+
config SENSORS_ADT7470
tristate "Analog Devices ADT7470"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called adt7473.
+config SENSORS_ADT7475
+ tristate "Analog Devices ADT7475"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7475 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called adt7475.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71882FG and F71883FG"
+ tristate "Fintek F71862FG, F71882FG and F8000"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71882FG and F71883FG Super-I/O chips.
+ features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+ and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71882fg.
will be called f75375s.
config SENSORS_FSCHER
- tristate "FSC Hermes"
+ tristate "FSC Hermes (DEPRECATED)"
depends on X86 && I2C
help
+ This driver is DEPRECATED please use the new merged fschmd
+ ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
+ instead.
+
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
will be called fscher.
config SENSORS_FSCPOS
- tristate "FSC Poseidon"
+ tristate "FSC Poseidon (DEPRECATED)"
depends on X86 && I2C
help
+ This driver is DEPRECATED please use the new merged fschmd
+ ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
+ instead.
+
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
config SENSORS_FSCHMD
tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
- depends on X86 && I2C && EXPERIMENTAL
+ depends on X86 && I2C
help
If you say yes here you get support for various Fujitsu Siemens
- Computers sensor chips.
+ Computers sensor chips, including support for the integrated
+ watchdog.
- This is a new merged driver for FSC sensor chips which is intended
- as a replacment for the fscpos, fscscy and fscher drivers and adds
- support for several other FCS sensor chips.
+ This is a merged driver for FSC sensor chips replacing the fscpos,
+ fscscy and fscher drivers and adding support for several other FSC
+ sensor chips.
This driver can also be built as a module. If so, the module
will be called fschmd.
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
config SENSORS_IBMPEX
tristate "IBM PowerExecutive temperature/power sensors"
select IPMI_SI
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
+ IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
+ SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
will be called lm63.
config SENSORS_LM70
- tristate "National Semiconductor LM70"
+ tristate "National Semiconductor LM70 / Texas Instruments TMP121"
depends on SPI_MASTER && EXPERIMENTAL
help
If you say yes here you get support for the National Semiconductor
- LM70 digital temperature sensor chip.
+ LM70 and Texas Instruments TMP121/TMP123 digital temperature
+ sensor chips.
This driver can also be built as a module. If so, the module
will be called lm70.
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
+
+ - Dallas Semiconductor DS75 and DS1775
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
+ This driver supports driver model based binding through board
+ specific I2C device tables.
+
+ It also supports the "legacy" style of driver binding. To use
+ that with some chips which don't replicate LM75 quirks exactly,
+ you may need the "force" module parameter.
This driver can also be built as a module. If so, the module
will be called lm75.
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
- MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
-
- The Analog Devices ADT7461 sensor chip is also supported, but only
- if found in ADM1032 compatibility mode.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+ MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+ MAX6681 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
This driver can also be built as a module. If so, the module
will be called lm93.
+config SENSORS_LTC4245
+ tristate "Linear Technology LTC4245"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4245
+ Multiple Supply Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4245.
+
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for the hardware monitoring
- and fan control features of the SMSC DME1737 (and compatibles
- like the Asus A8000) and SCH311x Super-I/O chips.
+ and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+ Asus A8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called dme1737.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_ULTRA45
+ tristate "Sun Ultra45 PIC16F747"
+ depends on SPARC64
+ help
+ This driver provides support for the Ultra45 workstation environmental
+ sensors.
+
config SENSORS_HDAPS
tristate "IBM Hard Drive Active Protection System (hdaps)"
depends on INPUT && X86
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on ACPI && INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ if the led infrastructure is activated, support for a led indicating
+ disk protection will be provided as hp:red:hddprotection.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for HP laptops will be
+ called hp_accel.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of lis3lv02d.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff