#
-# I2C Sensor chip drivers configuration
+# Hardware monitoring chip drivers configuration
#
-menu "Hardware Monitoring support"
-
-config HWMON
+menuconfig HWMON
tristate "Hardware Monitoring support"
+ depends on HAS_IOMEM
default y
help
Hardware monitoring devices let you monitor the hardware health
of a system. Most modern motherboards include such a device. It
can include temperature sensors, voltage sensors, fan speed
sensors and various additional features such as the ability to
- control the speed of the fans.
+ control the speed of the fans. If you want this support you
+ should say Y here and also to the specific driver(s) for your
+ sensors chip(s) below.
+
+ To find out which specific driver(s) you need, use the
+ sensors-detect script from the lm_sensors package. Read
+ <file:Documentation/hwmon/userspace-tools> for details.
+
+ This support can also be built as a module. If so, the module
+ will be called hwmon.
+
+if HWMON
+
+config HWMON_VID
+ tristate
+ default n
+
+config SENSORS_ABITUGURU
+ tristate "Abit uGuru (rev 1 & 2)"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru.
+
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
+config SENSORS_AD7418
+ tristate "Analog Devices AD7416, AD7417 and AD7418"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7416, AD7417 and AD7418 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7418.
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
- depends on HWMON && I2C
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
config SENSORS_ADM1025
tristate "Analog Devices ADM1025 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
config SENSORS_ADM1026
tristate "Analog Devices ADM1026 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1026
sensor chip.
This driver can also be built as a module. If so, the module
will be called adm1026.
+config SENSORS_ADM1029
+ tristate "Analog Devices ADM1029"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Analog Devices ADM1029
+ sensor chip.
+ Very rare chip, please let us know you use it.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1029.
+
config SENSORS_ADM1031
tristate "Analog Devices ADM1031 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
+config SENSORS_K8TEMP
+ tristate "AMD Athlon64/FX or Opteron temperature sensor"
+ depends on X86 && PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the temperature
+ sensor(s) inside your CPU. Supported is whole AMD K8
+ microarchitecture. Please note that you will need at least
+ lm-sensors 2.10.1 for proper userspace support.
+
+ This driver can also be built as a module. If so, the module
+ will be called k8temp.
+
+config SENSORS_AMS
+ tristate "Apple Motion Sensor driver"
+ depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ select INPUT_POLLDEV
+ help
+ Support for the motion sensor included in PowerBooks. Includes
+ implementations for PMU and I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called ams.
+
+config SENSORS_AMS_PMU
+ bool "PMU variant"
+ depends on SENSORS_AMS && ADB_PMU
+ default y
+ help
+ PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+ bool "I2C variant"
+ depends on SENSORS_AMS && I2C
+ default y
+ help
+ I2C variant of motion sensor, found in early 2005 PowerBooks and
+ iBooks.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on X86 && I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for the Attansic ATXP1 VID
controller.
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for Dallas Semiconductor
DS1621 and DS1625 sensor chips.
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_F71805F
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71805f.
+
+config SENSORS_F71882FG
+ tristate "Fintek F71882FG and F71883FG"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71882FG and F71883FG Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71882fg.
+
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP and F75373";
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP and F75373
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
config SENSORS_FSCHER
tristate "FSC Hermes"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
will be called fscpos.
+config SENSORS_FSCHMD
+ tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+ depends on X86 && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for various Fujitsu Siemens
+ Computers sensor chips.
+
+ This is a new merged driver for FSC sensor chips which is intended
+ as a replacment for the fscpos, fscscy and fscher drivers and adds
+ support for several other FCS sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
- depends on HWMON && I2C
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
config SENSORS_GL520SM
tristate "Genesys Logic GL520SM"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
+ select HWMON_VID
help
If you say yes here you get support for Genesys Logic GL520SM
sensor chips.
This driver can also be built as a module. If so, the module
will be called gl520sm.
+config SENSORS_CORETEMP
+ tristate "Intel Core (2) Duo/Solo temperature sensor"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported all are all known variants
+ of Intel Core family.
+
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3550, x3650, x3655,
+ x3755, and certain HS20 blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
- depends on HWMON && I2C
- select I2C_SENSOR
+ select HWMON_VID
help
- If you say yes here you get support for ITE IT87xx sensor chips
- and clones: SiS960.
+ If you say yes here you get support for ITE IT8705F, IT8712F,
+ IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
config SENSORS_LM63
tristate "National Semiconductor LM63"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for the National Semiconductor
LM63 remote diode digital temperature sensor with integrated fan
This driver can also be built as a module. If so, the module
will be called lm63.
+config SENSORS_LM70
+ tristate "National Semiconductor LM70"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM70 digital temperature sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm70.
+
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
- depends on HWMON && I2C
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM75
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
config SENSORS_LM77
tristate "National Semiconductor LM77"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM77
sensor chips.
config SENSORS_LM78
tristate "National Semiconductor LM78 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM78,
LM78-J and LM79.
config SENSORS_LM80
tristate "National Semiconductor LM80"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
will be called lm80.
config SENSORS_LM83
- tristate "National Semiconductor LM83"
- depends on HWMON && I2C
- select I2C_SENSOR
+ tristate "National Semiconductor LM83 and compatibles"
+ depends on I2C
help
If you say yes here you get support for National Semiconductor
- LM83 sensor chips.
+ LM82 and LM83 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm83.
config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
config SENSORS_LM87
tristate "National Semiconductor LM87"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
+ select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
sensor chips.
config SENSORS_LM90
tristate "National Semiconductor LM90 and compatibles"
- depends on HWMON && I2C
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
+ MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
The Analog Devices ADT7461 sensor chip is also supported, but only
if found in ADM1032 compatibility mode.
config SENSORS_LM92
tristate "National Semiconductor LM92 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm92.
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C
help
If you say yes here you get support for MAX1619 sensor chip.
This driver can also be built as a module. If so, the module
will be called max1619.
+config SENSORS_MAX6650
+ tristate "Maxim MAX6650 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the MAX6650 / MAX6651
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6650.
+
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
+ select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called pc87360.
+config SENSORS_PC87427
+ tristate "National Semiconductor PC87427"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC87427 Super-I/O chip.
+ The chip has two distinct logical devices, one for fan speed
+ monitoring and control, and one for voltage and temperature
+ monitoring. Only fan speed monitoring is supported right now.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87427.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on HWMON && I2C && PCI && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_DME1737
+ tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737 (and compatibles
+ like the Asus A8000) and SCH311x Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
- LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
+ LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 chips.
+
+ The temperature and voltage sensor features of the LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 are supported by another
+ driver, select also "SMSC LPC47M192 and compatibles" below for
+ those.
This driver can also be built as a module. If so, the module
will be called smsc47m1.
+config SENSORS_SMSC47M192
+ tristate "SMSC LPC47M192 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the temperature and
+ voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
+ and LPC47M997 chips.
+
+ The fan monitoring and control capabilities of these chips
+ are supported by another driver, select
+ "SMSC LPC47M10x and compatibles" above. You need both drivers
+ if you want fan control and voltage/temperature sensor support.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47m192.
+
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
+ depends on EXPERIMENTAL
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_THMC50
+ tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments THMC50
+ sensor chips and clones: the Analog Devices ADM1022.
+
+ This driver can also be built as a module. If so, the module
+ will be called thmc50.
+
config SENSORS_VIA686A
tristate "VIA686A"
- depends on HWMON && I2C && PCI
- select I2C_SENSOR
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
This driver can also be built as a module. If so, the module
will be called via686a.
+config SENSORS_VT1211
+ tristate "VIA VT1211"
+ depends on EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here then you get support for hardware monitoring
+ features of the VIA VT1211 Super-I/O chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt1211.
+
+config SENSORS_VT8231
+ tristate "VIA VT8231"
+ depends on PCI
+ select HWMON_VID
+ help
+ If you say yes here then you get support for the integrated sensors
+ in the VIA VT8231 device.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt8231.
+
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
- depends on HWMON && I2C
- select I2C_SENSOR
+ depends on I2C
+ select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
This driver can also be built as a module. If so, the module
will be called w83781d.
+config SENSORS_W83791D
+ tristate "Winbond W83791D"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W83791D chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83791d.
+
+config SENSORS_W83792D
+ tristate "Winbond W83792D"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83792D chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83792d.
+
+config SENSORS_W83793
+ tristate "Winbond W83793"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W83793
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83793.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
will be called w83l785ts.
config SENSORS_W83627HF
- tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
+ tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
- of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+ of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
+ W83697HF.
This driver can also be built as a module. If so, the module
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
+ tristate "Winbond W83627EHF/DHG"
+ select HWMON_VID
help
- If you say yes here you get preliminary support for the hardware
+ If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
This driver also supports the W83627EHG, which is the lead-free
- version of the W83627EHF.
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_HDAPS
+ tristate "IBM Hard Drive Active Protection System (hdaps)"
+ depends on INPUT && X86
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the IBM Hard Drive Active Protection
+ System (hdaps), which provides an accelerometer and other misc. data.
+ ThinkPads starting with the R50, T41, and X40 are supported. The
+ accelerometer data is readable via sysfs.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ If your ThinkPad is not recognized by the driver, please update to latest
+ BIOS. This is especially the case for some R52 ThinkPads.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of hdaps.
+
+config SENSORS_APPLESMC
+ tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
+ depends on INPUT && X86
+ select NEW_LEDS
+ select LEDS_CLASS
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the Apple System Management
+ Controller, which provides an accelerometer (Apple Sudden Motion
+ Sensor), light sensors, temperature sensors, keyboard backlight
+ control and fan control.
+
+ Only Intel-based Apple's computers are supported (MacBook Pro,
+ MacBook, MacMini).
+
+ Data from the different sensors, keyboard backlight control and fan
+ control are accessible via sysfs.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of applesmc.
+
config HWMON_DEBUG_CHIP
bool "Hardware Monitoring Chip debugging messages"
- depends on HWMON
default n
help
Say Y here if you want the I2C chip drivers to produce a bunch of
a problem with I2C support and want to see more of what is going
on.
-endmenu
+endif # HWMON
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff