HID: add support for Acer T230H multitouch
[safe/jmp/linux-2.6] / drivers / hid / hid-ntrig.c
index c5b252b..49ce69d 100644 (file)
@@ -1,13 +1,8 @@
 /*
- *  HID driver for some ntrig "special" devices
+ *  HID driver for N-Trig touchscreens
  *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- *  Copyright (c) 2007 Paul Walmsley
- *  Copyright (c) 2008 Jiri Slaby
  *  Copyright (c) 2008 Rafi Rubin
+ *  Copyright (c) 2009 Stephane Chatty
  *
  */
 
 #define nt_map_key_clear(c)    hid_map_usage_clear(hi, usage, bit, max, \
                                        EV_KEY, (c))
 
+struct ntrig_data {
+       __s32 x, y, id, w, h;
+       char reading_a_point, found_contact_id;
+       char pen_active;
+       char finger_active;
+       char inverted;
+};
+
+/*
+ * this driver is aimed at two firmware versions in circulation:
+ *  - dual pen/finger single touch
+ *  - finger multitouch, pen not working
+ */
+
 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
                struct hid_field *field, struct hid_usage *usage,
                unsigned long **bit, int *max)
 {
-       if ((usage->hid & HID_USAGE_PAGE) == HID_UP_DIGITIZER &&
-                       (usage->hid & 0xff) == 0x47) {
-               nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-               return 1;
+       switch (usage->hid & HID_USAGE_PAGE) {
+
+       case HID_UP_GENDESK:
+               switch (usage->hid) {
+               case HID_GD_X:
+                       hid_map_usage(hi, usage, bit, max,
+                                       EV_ABS, ABS_MT_POSITION_X);
+                       input_set_abs_params(hi->input, ABS_X,
+                                       field->logical_minimum,
+                                       field->logical_maximum, 0, 0);
+                       return 1;
+               case HID_GD_Y:
+                       hid_map_usage(hi, usage, bit, max,
+                                       EV_ABS, ABS_MT_POSITION_Y);
+                       input_set_abs_params(hi->input, ABS_Y,
+                                       field->logical_minimum,
+                                       field->logical_maximum, 0, 0);
+                       return 1;
+               }
+               return 0;
+
+       case HID_UP_DIGITIZER:
+               switch (usage->hid) {
+               /* we do not want to map these for now */
+               case HID_DG_CONTACTID: /* value is useless */
+               case HID_DG_INPUTMODE:
+               case HID_DG_DEVICEINDEX:
+               case HID_DG_CONTACTCOUNT:
+               case HID_DG_CONTACTMAX:
+                       return -1;
+
+               /* original mapping by Rafi Rubin */
+               case HID_DG_CONFIDENCE:
+                       nt_map_key_clear(BTN_TOOL_DOUBLETAP);
+                       return 1;
+
+               /* width/height mapped on TouchMajor/TouchMinor/Orientation */
+               case HID_DG_WIDTH:
+                       hid_map_usage(hi, usage, bit, max,
+                                       EV_ABS, ABS_MT_TOUCH_MAJOR);
+                       return 1;
+               case HID_DG_HEIGHT:
+                       hid_map_usage(hi, usage, bit, max,
+                                       EV_ABS, ABS_MT_TOUCH_MINOR);
+                       input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+                                       0, 1, 0, 0);
+                       return 1;
+               }
+               return 0;
+
+       case 0xff000000:
+               /* we do not want to map these: no input-oriented meaning */
+               return -1;
        }
+
        return 0;
 }
 
@@ -51,6 +110,163 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 
        return 0;
 }
+
+/*
+ * this function is called upon all reports
+ * so that we can filter contact point information,
+ * decide whether we are in multi or single touch mode
+ * and call input_mt_sync after each point if necessary
+ */
+static int ntrig_event (struct hid_device *hid, struct hid_field *field,
+                                       struct hid_usage *usage, __s32 value)
+{
+       struct input_dev *input = field->hidinput->input;
+       struct ntrig_data *nd = hid_get_drvdata(hid);
+
+        if (hid->claimed & HID_CLAIMED_INPUT) {
+               switch (usage->hid) {
+
+               case HID_DG_INRANGE:
+                       if (field->application & 0x3)
+                               nd->pen_active = (value != 0);
+                       else
+                               nd->finger_active = (value != 0);
+                       return 0;
+
+               case HID_DG_INVERT:
+                       nd->inverted = value;
+                       return 0;
+
+               case HID_GD_X:
+                       nd->x = value;
+                       nd->reading_a_point = 1;
+                       break;
+               case HID_GD_Y:
+                       nd->y = value;
+                       break;
+               case HID_DG_CONTACTID:
+                       nd->id = value;
+                       /* we receive this only when in multitouch mode */
+                       nd->found_contact_id = 1;
+                       break;
+               case HID_DG_WIDTH:
+                       nd->w = value;
+                       break;
+               case HID_DG_HEIGHT:
+                       nd->h = value;
+                       /*
+                        * when in single touch mode, this is the last
+                        * report received in a finger event. We want
+                        * to emit a normal (X, Y) position
+                        */
+                       if (!nd->found_contact_id) {
+                               if (nd->pen_active && nd->finger_active) {
+                                       input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
+                                       input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
+                               }
+                               input_event(input, EV_ABS, ABS_X, nd->x);
+                               input_event(input, EV_ABS, ABS_Y, nd->y);
+                       }
+                       break;
+               case HID_DG_TIPPRESSURE:
+                       /*
+                        * when in single touch mode, this is the last
+                        * report received in a pen event. We want
+                        * to emit a normal (X, Y) position
+                        */
+                       if (! nd->found_contact_id) {
+                               if (nd->pen_active && nd->finger_active) {
+                                       input_report_key(input,
+                                                       nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
+                                                       , 0);
+                                       input_report_key(input,
+                                                       nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
+                                                       , 1);
+                               }
+                               input_event(input, EV_ABS, ABS_X, nd->x);
+                               input_event(input, EV_ABS, ABS_Y, nd->y);
+                               input_event(input, EV_ABS, ABS_PRESSURE, value);
+                       }
+                       break;
+               case 0xff000002:
+                       /*
+                        * we receive this when the device is in multitouch
+                        * mode. The first of the three values tagged with
+                        * this usage tells if the contact point is real
+                        * or a placeholder
+                        */
+                       if (!nd->reading_a_point || value != 1)
+                               break;
+                       /* emit a normal (X, Y) for the first point only */
+                       if (nd->id == 0) {
+                               input_event(input, EV_ABS, ABS_X, nd->x);
+                               input_event(input, EV_ABS, ABS_Y, nd->y);
+                       }
+                       input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
+                       input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+                       if (nd->w > nd->h) {
+                               input_event(input, EV_ABS,
+                                               ABS_MT_ORIENTATION, 1);
+                               input_event(input, EV_ABS,
+                                               ABS_MT_TOUCH_MAJOR, nd->w);
+                               input_event(input, EV_ABS,
+                                               ABS_MT_TOUCH_MINOR, nd->h);
+                       } else {
+                               input_event(input, EV_ABS,
+                                               ABS_MT_ORIENTATION, 0);
+                               input_event(input, EV_ABS,
+                                               ABS_MT_TOUCH_MAJOR, nd->h);
+                               input_event(input, EV_ABS,
+                                               ABS_MT_TOUCH_MINOR, nd->w);
+                       }
+                       input_mt_sync(field->hidinput->input);
+                       nd->reading_a_point = 0;
+                       nd->found_contact_id = 0;
+                       break;
+
+               default:
+                       /* fallback to the generic hidinput handling */
+                       return 0;
+               }
+       }
+
+       /* we have handled the hidinput part, now remains hiddev */
+        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+                hid->hiddev_hid_event(hid, field, usage, value);
+
+       return 1;
+}
+
+static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+       int ret;
+       struct ntrig_data *nd;
+
+       nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
+       if (!nd) {
+               dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+               return -ENOMEM;
+       }
+       nd->reading_a_point = 0;
+       nd->found_contact_id = 0;
+       hid_set_drvdata(hdev, nd);
+
+       ret = hid_parse(hdev);
+       if (!ret)
+               ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+       if (ret)
+               kfree (nd);
+
+       return ret;
+}
+
+static void ntrig_remove(struct hid_device *hdev)
+{
+       hid_hw_stop(hdev);
+       kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id ntrig_devices[] = {
        { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
                .driver_data = NTRIG_DUPLICATE_USAGES },
@@ -58,19 +274,28 @@ static const struct hid_device_id ntrig_devices[] = {
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
+static const struct hid_usage_id ntrig_grabbed_usages[] = {
+       { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+       { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
 static struct hid_driver ntrig_driver = {
        .name = "ntrig",
        .id_table = ntrig_devices,
+       .probe = ntrig_probe,
+       .remove = ntrig_remove,
        .input_mapping = ntrig_input_mapping,
        .input_mapped = ntrig_input_mapped,
+       .usage_table = ntrig_grabbed_usages,
+       .event = ntrig_event,
 };
 
-static int ntrig_init(void)
+static int __init ntrig_init(void)
 {
        return hid_register_driver(&ntrig_driver);
 }
 
-static void ntrig_exit(void)
+static void __exit ntrig_exit(void)
 {
        hid_unregister_driver(&ntrig_driver);
 }