#
# HID driver configuration
#
-menu "HID Devices"
+menuconfig HID_SUPPORT
+ bool "HID Devices"
depends on INPUT
+ default y
+ ---help---
+ Say Y here to get to see options for various computer-human interface
+ device drivers. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if HID_SUPPORT
config HID
tristate "Generic HID support"
+ depends on INPUT
+ default y
+ ---help---
+ A human interface device (HID) is a type of computer device that
+ interacts directly with and takes input from humans. The term "HID"
+ most commonly used to refer to the USB-HID specification, but other
+ devices (such as, but not strictly limited to, Bluetooth) are
+ designed using HID specification (this involves certain keyboards,
+ mice, tablets, etc). This option compiles into kernel the generic
+ HID layer code (parser, usages, etc.), which can then be used by
+ transport-specific HID implementation (like USB or Bluetooth).
+
+ For docs and specs, see http://www.usb.org/developers/hidpage/
+
+ If unsure, say Y
+
+config HID_DEBUG
+ bool "HID debugging support"
+ default y if !EMBEDDED
+ depends on HID
+ ---help---
+ This option lets the HID layer output diagnostics about its internal
+ state, resolve HID usages, dump HID fields, etc. Individual HID drivers
+ use this debugging facility to output information about individual HID
+ devices, etc.
+
+ This feature is useful for those who are either debugging the HID parser
+ or any HID hardware device.
+
+ If unsure, say N
+
+config HIDRAW
+ bool "/dev/hidraw raw HID device support"
+ depends on HID
+ ---help---
+ Say Y here if you want to support HID devices (from the USB
+ specification standpoint) that aren't strictly user interface
+ devices, like monitor controls and Uninterruptable Power Supplies.
+
+ This module supports these devices separately using a separate
+ event interface on /dev/hidraw.
+
+ There is also a /dev/hiddev configuration option in the USB HID
+ configuration menu. In comparison to hiddev, this device does not process
+ the hid events at all (no parsing, no lookups). This lets applications
+ to work on raw hid events when they want to, and avoid using transport-specific
+ userspace libhid/libusb libraries.
+
+ If unsure, say Y.
+
+source "drivers/hid/usbhid/Kconfig"
+
+menu "Special HID drivers"
+ depends on HID
+
+config HID_COMPAT
+ bool "Load all HID drivers on hid core load"
default y
---help---
- Say Y here if you want generic HID support to connect keyboards,
- mice, joysticks, graphic tablets, or any other HID based devices
- to your computer. You also need to select particular types of
- HID devices you want to compile support for, in the particular
- driver menu (USB, Bluetooth)
+ Compatible option for older userspace. If you have system without udev
+ support of module loading through aliases and also old
+ module-init-tools which can't handle hid bus, choose Y here. Otherwise
+ say N. If you say N and your userspace is old enough, the only
+ functionality you lose is modules autoloading.
+
+ If unsure, say Y.
+
+config HID_A4TECH
+ tristate "A4 tech" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+
+config HID_APPLE
+ tristate "Apple" if EMBEDDED
+ depends on (USB_HID || BT_HIDP)
+ default !EMBEDDED
+ ---help---
+ Support for some Apple devices which less or more break
+ HID specification.
+
+ Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
+ MacBooks, MacBook Pros and Apple Aluminum.
+
+config HID_BELKIN
+ tristate "Belkin" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Belkin Flip KVM and Wireless keyboard.
+
+config HID_CHERRY
+ tristate "Cherry" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Cherry Cymotion keyboard.
+
+config HID_CHICONY
+ tristate "Chicony" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Chicony Tactical pad.
+
+config HID_CYPRESS
+ tristate "Cypress" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for cypress mouse and barcode readers.
+
+config HID_EZKEY
+ tristate "Ezkey" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Ezkey BTC 8193 keyboard.
+
+config HID_GYRATION
+ tristate "Gyration" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Gyration remote control.
+
+config HID_LOGITECH
+ tristate "Logitech" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Logitech devices that are not fully compliant with HID standard.
+
+config LOGITECH_FF
+ bool "Logitech force feedback"
+ depends on HID_LOGITECH
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you have one of these devices:
+ - Logitech WingMan Cordless RumblePad
+ - Logitech WingMan Cordless RumblePad 2
+ - Logitech WingMan Force 3D
+ - Logitech Formula Force EX
+ - Logitech MOMO Force wheel
+
+ and if you want to enable force feedback for them.
+ Note: if you say N here, this device will still be supported, but without
+ force feedback.
+
+config LOGIRUMBLEPAD2_FF
+ bool "Logitech Rumblepad 2 force feedback"
+ depends on HID_LOGITECH
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you want to enable force feedback support for Logitech
+ Rumblepad 2 devices.
+
+config HID_MICROSOFT
+ tristate "Microsoft" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Microsoft devices that are not fully compliant with HID standard.
+
+config HID_MONTEREY
+ tristate "Monterey" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Monterey Genius KB29E.
+
+config HID_NTRIG
+ tristate "NTrig" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for N-Trig touch screen.
+
+config HID_PANTHERLORD
+ tristate "Pantherlord devices support" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for PantherLord/GreenAsia based device support.
+
+config PANTHERLORD_FF
+ bool "Pantherlord force feedback support"
+ depends on HID_PANTHERLORD
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you have a PantherLord/GreenAsia based game controller
+ or adapter and want to enable force feedback support for it.
+
+config HID_PETALYNX
+ tristate "Petalynx" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Petalynx Maxter remote control.
+
+config HID_SAMSUNG
+ tristate "Samsung" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Samsung InfraRed remote control.
+
+config HID_SONY
+ tristate "Sony" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Sony PS3 controller.
+
+config HID_SUNPLUS
+ tristate "Sunplus" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Sunplus wireless desktop.
+
+config GREENASIA_FF
+ tristate "GreenAsia (Product ID 0x12) force feedback support"
+ depends on USB_HID
+ select INPUT_FF_MEMLESS
+ ---help---
+ Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
+ (like MANTA Warior MM816 and SpeedLink Strike2 SL-6635) or adapter
+ and want to enable force feedback support for it.
+
+config HID_TOPSEED
+ tristate "TopSeed Cyberlink remote control support" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Say Y if you have a TopSeed Cyberlink remote control.
+
+config THRUSTMASTER_FF
+ tristate "ThrustMaster devices support"
+ depends on USB_HID
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
+ a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
+
+config ZEROPLUS_FF
+ tristate "Zeroplus based game controller support"
+ depends on USB_HID
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you have a Zeroplus based game controller.
endmenu
+endif # HID_SUPPORT
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff