#include "i915_drm.h"
#include "i915_drv.h"
+#define I915_LVDS "i915_lvds"
+
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU 0
+ * #define DRM_MODE_SCALE_FULLSCREEN 1
+ * #define DRM_MODE_SCALE_NO_SCALE 2
+ * #define DRM_MODE_SCALE_ASPECT 3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+ int fitting_mode;
+ u32 pfit_control;
+ u32 pfit_pgm_ratios;
+};
+
/**
* Sets the backlight level.
*
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ /*
+ * float point operation is not supported . So the PANEL_RATIO_FACTOR
+ * is defined, which can avoid the float point computation when
+ * calculating the panel ratio.
+ */
+#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0;
+ int left_border = 0, right_border = 0, top_border = 0;
+ int bottom_border = 0;
+ bool border = 0;
+ int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+ int horiz_ratio, vert_ratio;
+ u32 hsync_width, vsync_width;
+ u32 hblank_width, vblank_width;
+ u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
- printk(KERN_ERR "Can't support LVDS on pipe A\n");
+ DRM_ERROR("Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
+ DRM_ERROR("Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
-
+ /* If we don't have a panel mode, there is nothing we can do */
+ if (dev_priv->panel_fixed_mode == NULL)
+ return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
+ /* Make sure pre-965s set dither correctly */
+ if (!IS_I965G(dev)) {
+ if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+ }
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay) {
+ pfit_pgm_ratios = 0;
+ border = 0;
+ goto out;
+ }
+
+ /* 965+ wants fuzzy fitting */
+ if (IS_I965G(dev))
+ pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY;
+
+ hsync_width = adjusted_mode->crtc_hsync_end -
+ adjusted_mode->crtc_hsync_start;
+ vsync_width = adjusted_mode->crtc_vsync_end -
+ adjusted_mode->crtc_vsync_start;
+ hblank_width = adjusted_mode->crtc_hblank_end -
+ adjusted_mode->crtc_hblank_start;
+ vblank_width = adjusted_mode->crtc_vblank_end -
+ adjusted_mode->crtc_vblank_start;
+ /*
+ * Deal with panel fitting options. Figure out how to stretch the
+ * image based on its aspect ratio & the current panel fitting mode.
+ */
+ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+ adjusted_mode->vdisplay;
+ desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+ mode->vdisplay;
+ /*
+ * Enable automatic panel scaling for non-native modes so that they fill
+ * the screen. Should be enabled before the pipe is enabled, according
+ * to register description and PRM.
+ * Change the value here to see the borders for debugging
+ */
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+
+ switch (lvds_priv->fitting_mode) {
+ case DRM_MODE_SCALE_NO_SCALE:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1)
+ right_border++;
+ top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ /* Set active & border values */
+ adjusted_mode->crtc_hdisplay = mode->hdisplay;
+ /* Keep the boder be even */
+ if (right_border & 1)
+ right_border++;
+ /* use the border directly instead of border minuse one */
+ adjusted_mode->crtc_hblank_start = mode->hdisplay +
+ right_border;
+ /* keep the blank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start + hblank_width;
+ /* get the hsync pos relative to hblank start */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start + hsync_pos;
+ /* keep the hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start + hsync_width;
+ adjusted_mode->crtc_vdisplay = mode->vdisplay;
+ /* use the border instead of border minus one */
+ adjusted_mode->crtc_vblank_start = mode->vdisplay +
+ bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start + vblank_width;
+ /* get the vsync start postion relative to vblank start */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start + vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vblank_start + vsync_width;
+ border = 1;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the spect ratio */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev)) {
+ /* 965+ is easy, it does everything in hw */
+ if (panel_ratio > desired_ratio)
+ pfit_control |= PFIT_SCALING_PILLAR;
+ else if (panel_ratio < desired_ratio)
+ pfit_control |= PFIT_SCALING_LETTER;
+ else
+ pfit_control |= PFIT_SCALING_AUTO;
+ } else {
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ u32 horiz_bits, vert_bits, bits = 12;
+ horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->hdisplay;
+ vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->vdisplay;
+ horiz_scale = adjusted_mode->hdisplay *
+ PANEL_RATIO_FACTOR / mode->hdisplay;
+ vert_scale = adjusted_mode->vdisplay *
+ PANEL_RATIO_FACTOR / mode->vdisplay;
+
+ /* retain aspect ratio */
+ if (panel_ratio > desired_ratio) { /* Pillar */
+ u32 scaled_width;
+ scaled_width = mode->hdisplay * vert_scale /
+ PANEL_RATIO_FACTOR;
+ horiz_ratio = vert_ratio;
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Pillar will have left/right borders */
+ left_border = (adjusted_mode->hdisplay -
+ scaled_width) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1) /* odd resolutions */
+ right_border++;
+ /* keep the border be even */
+ if (right_border & 1)
+ right_border++;
+ adjusted_mode->crtc_hdisplay = scaled_width;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_hblank_start =
+ scaled_width + right_border;
+ /* keep the hblank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start +
+ hblank_width;
+ /*
+ * get the hsync start pos relative to
+ * hblank start
+ */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync_pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start +
+ hsync_pos;
+ /* keept hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start +
+ hsync_width;
+ border = 1;
+ } else if (panel_ratio < desired_ratio) { /* letter */
+ u32 scaled_height = mode->vdisplay *
+ horiz_scale / PANEL_RATIO_FACTOR;
+ vert_ratio = horiz_ratio;
+ pfit_control |= (HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Letterbox will have top/bottom border */
+ top_border = (adjusted_mode->vdisplay -
+ scaled_height) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ adjusted_mode->crtc_vdisplay = scaled_height;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_vblank_start =
+ scaled_height + bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start +
+ vblank_width;
+ /*
+ * get the vsync start pos relative to
+ * vblank start
+ */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start +
+ vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start +
+ vsync_width;
+ border = 1;
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ horiz_bits = (1 << bits) * horiz_ratio /
+ PANEL_RATIO_FACTOR;
+ vert_bits = (1 << bits) * vert_ratio /
+ PANEL_RATIO_FACTOR;
+ pfit_pgm_ratios =
+ ((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+ PFIT_VERT_SCALE_MASK) |
+ ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+ PFIT_HORIZ_SCALE_MASK);
+ }
+ break;
+
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev))
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ break;
+ default:
+ break;
+ }
+
+out:
+ lvds_priv->pfit_control = pfit_control;
+ lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- u32 pfit_control;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (!IS_I965G(dev)) {
- if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- }
- else
- pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
- I915_WRITE(PFIT_CONTROL, pfit_control);
+ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
/**
uint64_t value)
{
struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+ struct intel_output *intel_output =
+ to_intel_output(connector);
+
+ if (property == dev->mode_config.scaling_mode_property &&
+ connector->encoder) {
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ if (value == DRM_MODE_SCALE_NON_GPU) {
+ DRM_DEBUG_KMS(I915_LVDS,
+ "non_GPU property is unsupported\n");
+ return 0;
+ }
+ if (lvds_priv->fitting_mode == value) {
+ /* the LVDS scaling property is not changed */
+ return 0;
+ }
+ lvds_priv->fitting_mode = value;
+ if (crtc && crtc->enabled) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
+ }
+ }
return 0;
}
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_lvds_save,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+ DRM_DEBUG_KMS(I915_LVDS,
+ "Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
/* These systems claim to have LVDS, but really don't */
-static const struct dmi_system_id __initdata intel_no_lvds[] = {
+static const struct dmi_system_id intel_no_lvds[] = {
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
},
},
-
- /* FIXME: add a check for the Aopen Mini PC */
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Aopen i945GTt-VFA",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+ },
+ },
{ } /* terminating entry */
};
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ struct intel_lvds_priv *lvds_priv;
u32 lvds;
int pipe, gpio = GPIOC;
gpio = PCH_GPIOC;
}
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ intel_output = kzalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_output) {
return;
}
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
+ lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+ intel_output->dev_priv = lvds_priv;
+ /* create the scaling mode property */
+ drm_mode_create_scaling_mode_property(dev);
+ /*
+ * the initial panel fitting mode will be FULL_SCREEN.
+ */
+ drm_connector_attach_property(&intel_output->base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
return;
failed:
- DRM_DEBUG("No LVDS modes found, disabling.\n");
+ DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n");
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
- kfree(connector);
+ kfree(intel_output);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff