#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4)
#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
+#define SNB_GMCH_CTRL 0x50
+#define SNB_GMCH_GMS_STOLEN_MASK 0xF8
+#define SNB_GMCH_GMS_STOLEN_32M (1 << 3)
+#define SNB_GMCH_GMS_STOLEN_64M (2 << 3)
+#define SNB_GMCH_GMS_STOLEN_96M (3 << 3)
+#define SNB_GMCH_GMS_STOLEN_128M (4 << 3)
+#define SNB_GMCH_GMS_STOLEN_160M (5 << 3)
+#define SNB_GMCH_GMS_STOLEN_192M (6 << 3)
+#define SNB_GMCH_GMS_STOLEN_224M (7 << 3)
+#define SNB_GMCH_GMS_STOLEN_256M (8 << 3)
+#define SNB_GMCH_GMS_STOLEN_288M (9 << 3)
+#define SNB_GMCH_GMS_STOLEN_320M (0xa << 3)
+#define SNB_GMCH_GMS_STOLEN_352M (0xb << 3)
+#define SNB_GMCH_GMS_STOLEN_384M (0xc << 3)
+#define SNB_GMCH_GMS_STOLEN_416M (0xd << 3)
+#define SNB_GMCH_GMS_STOLEN_448M (0xe << 3)
+#define SNB_GMCH_GMS_STOLEN_480M (0xf << 3)
+#define SNB_GMCH_GMS_STOLEN_512M (0x10 << 3)
+
/* PCI config space */
#define HPLLCC 0xc0 /* 855 only */
#define GC_CLOCK_100_200 (1 << 0)
#define GC_CLOCK_100_133 (2 << 0)
#define GC_CLOCK_166_250 (3 << 0)
+#define GCFGC2 0xda
#define GCFGC 0xf0 /* 915+ only */
#define GC_LOW_FREQUENCY_ENABLE (1 << 7)
#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
#define MI_NOOP MI_INSTR(0, 0)
#define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
#define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0)
+#define MI_WAIT_FOR_OVERLAY_FLIP (1<<16)
#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6)
#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2)
#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */
#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)
#define MI_REPORT_HEAD MI_INSTR(0x07, 0)
+#define MI_OVERLAY_FLIP MI_INSTR(0x11,0)
+#define MI_OVERLAY_CONTINUE (0x0<<21)
+#define MI_OVERLAY_ON (0x1<<21)
+#define MI_OVERLAY_OFF (0x2<<21)
#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
#define ASYNC_FLIP (1<<22)
#define DISPLAY_PLANE_A (0<<20)
#define DISPLAY_PLANE_B (1<<20)
+#define GFX_OP_PIPE_CONTROL ((0x3<<29)|(0x3<<27)|(0x2<<24)|2)
+#define PIPE_CONTROL_QW_WRITE (1<<14)
+#define PIPE_CONTROL_DEPTH_STALL (1<<13)
+#define PIPE_CONTROL_WC_FLUSH (1<<12)
+#define PIPE_CONTROL_IS_FLUSH (1<<11) /* MBZ on Ironlake */
+#define PIPE_CONTROL_TC_FLUSH (1<<10) /* GM45+ only */
+#define PIPE_CONTROL_ISP_DIS (1<<9)
+#define PIPE_CONTROL_NOTIFY (1<<8)
+#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+#define PIPE_CONTROL_STALL_EN (1<<1) /* in addr word, Ironlake+ only */
/*
* Fence registers
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 4
#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I965_FENCE_REG_VALID (1<<0)
#define I965_FENCE_MAX_PITCH_VAL 0x0400
+#define FENCE_REG_SANDYBRIDGE_0 0x100000
+#define SANDYBRIDGE_FENCE_PITCH_SHIFT 32
+
/*
* Instruction and interrupt control regs
*/
#define INSTDONE1 0x0207c /* 965+ only */
#define ACTHD_I965 0x02074
#define HWS_PGA 0x02080
+#define HWS_PGA_GEN6 0x04080
#define HWS_ADDRESS_MASK 0xfffff000
#define HWS_START_ADDRESS_SHIFT 4
+#define PWRCTXA 0x2088 /* 965GM+ only */
+#define PWRCTX_EN (1<<0)
#define IPEIR 0x02088
#define IPEHR 0x0208c
#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
+
+#define MI_MODE 0x0209c
+# define VS_TIMER_DISPATCH (1 << 6)
+
#define SCPD0 0x0209c /* 915+ only */
#define IER 0x020a0
#define IIR 0x020a4
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14)
+#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
#define I915_HWB_OOM_INTERRUPT (1<<13)
#define I915_SYNC_STATUS_INTERRUPT (1<<12)
#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
#define I915_ERROR_MEMORY_REFRESH (1<<1)
#define I915_ERROR_INSTRUCTION (1<<0)
#define INSTPM 0x020c0
+#define INSTPM_SELF_EN (1<<12) /* 915GM only */
#define ACTHD 0x020c8
#define FW_BLC 0x020d8
#define FW_BLC2 0x020dc
#define FW_BLC_SELF 0x020e0 /* 915+ only */
-#define FW_BLC_SELF_EN (1<<15)
+#define FW_BLC_SELF_EN_MASK (1<<31)
+#define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */
+#define FW_BLC_SELF_EN (1<<15) /* 945 only */
#define MM_BURST_LENGTH 0x00700000
#define MM_FIFO_WATERMARK 0x0001F000
#define LM_BURST_LENGTH 0x00000700
#define CM0_COLOR_EVICT_DISABLE (1<<3)
#define CM0_DEPTH_WRITE_DISABLE (1<<1)
#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
+#define BB_ADDR 0x02140 /* 8 bytes */
#define GFX_FLSH_CNTL 0x02170 /* 915+ only */
#define FBC_CTL_PERIODIC (1<<30)
#define FBC_CTL_INTERVAL_SHIFT (16)
#define FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define FBC_CTL_C3_IDLE (1<<13)
#define FBC_CTL_STRIDE_SHIFT (5)
#define FBC_CTL_FENCENO (1<<0)
#define FBC_COMMAND 0x0320c
# define GPIO_DATA_VAL_IN (1 << 12)
# define GPIO_DATA_PULLUP_DISABLE (1 << 13)
+#define GMBUS0 0x5100
+#define GMBUS1 0x5104
+#define GMBUS2 0x5108
+#define GMBUS3 0x510c
+#define GMBUS4 0x5110
+#define GMBUS5 0x5120
+
/*
* Clock control & power management
*/
#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
-#define DPLL_FPA01_P1_POST_DIV_MASK_IGD 0x00ff8000 /* IGD */
+#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
#define I915_FIFO_UNDERRUN_STATUS (1UL<<31)
#define I915_CRC_ERROR_ENABLE (1UL<<29)
*/
#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
#define DPLL_FPA01_P1_POST_DIV_SHIFT 16
-#define DPLL_FPA01_P1_POST_DIV_SHIFT_IGD 15
+#define DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15
/* i830, required in DVO non-gang */
#define PLL_P2_DIVIDE_BY_4 (1 << 23)
#define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
#define PLL_REF_INPUT_MASK (3 << 13)
#define PLL_LOAD_PULSE_PHASE_SHIFT 9
-/* IGDNG */
+/* Ironlake */
# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9
# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9)
# define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9)
#define FPB0 0x06048
#define FPB1 0x0604c
#define FP_N_DIV_MASK 0x003f0000
-#define FP_N_IGD_DIV_MASK 0x00ff0000
+#define FP_N_PINEVIEW_DIV_MASK 0x00ff0000
#define FP_N_DIV_SHIFT 16
#define FP_M1_DIV_MASK 0x00003f00
#define FP_M1_DIV_SHIFT 8
#define FP_M2_DIV_MASK 0x0000003f
-#define FP_M2_IGD_DIV_MASK 0x000000ff
+#define FP_M2_PINEVIEW_DIV_MASK 0x000000ff
#define FP_M2_DIV_SHIFT 0
#define DPLL_TEST 0x606c
#define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
#define CLKCFG_MEM_800 (3 << 4)
#define CLKCFG_MEM_MASK (7 << 4)
-/** GM965 GM45 render standby register */
-#define MCHBAR_RENDER_STANDBY 0x111B8
-
+#define CRSTANDVID 0x11100
+#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
+#define PXVFREQ_PX_MASK 0x7f000000
+#define PXVFREQ_PX_SHIFT 24
+#define VIDFREQ_BASE 0x11110
+#define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */
+#define VIDFREQ2 0x11114
+#define VIDFREQ3 0x11118
+#define VIDFREQ4 0x1111c
+#define VIDFREQ_P0_MASK 0x1f000000
+#define VIDFREQ_P0_SHIFT 24
+#define VIDFREQ_P0_CSCLK_MASK 0x00f00000
+#define VIDFREQ_P0_CSCLK_SHIFT 20
+#define VIDFREQ_P0_CRCLK_MASK 0x000f0000
+#define VIDFREQ_P0_CRCLK_SHIFT 16
+#define VIDFREQ_P1_MASK 0x00001f00
+#define VIDFREQ_P1_SHIFT 8
+#define VIDFREQ_P1_CSCLK_MASK 0x000000f0
+#define VIDFREQ_P1_CSCLK_SHIFT 4
+#define VIDFREQ_P1_CRCLK_MASK 0x0000000f
+#define INTTOEXT_BASE_ILK 0x11300
+#define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */
+#define INTTOEXT_MAP3_SHIFT 24
+#define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT)
+#define INTTOEXT_MAP2_SHIFT 16
+#define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT)
+#define INTTOEXT_MAP1_SHIFT 8
+#define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT)
+#define INTTOEXT_MAP0_SHIFT 0
+#define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT)
+#define MEMSWCTL 0x11170 /* Ironlake only */
+#define MEMCTL_CMD_MASK 0xe000
+#define MEMCTL_CMD_SHIFT 13
+#define MEMCTL_CMD_RCLK_OFF 0
+#define MEMCTL_CMD_RCLK_ON 1
+#define MEMCTL_CMD_CHFREQ 2
+#define MEMCTL_CMD_CHVID 3
+#define MEMCTL_CMD_VMMOFF 4
+#define MEMCTL_CMD_VMMON 5
+#define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears
+ when command complete */
+#define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */
+#define MEMCTL_FREQ_SHIFT 8
+#define MEMCTL_SFCAVM (1<<7)
+#define MEMCTL_TGT_VID_MASK 0x007f
+#define MEMIHYST 0x1117c
+#define MEMINTREN 0x11180 /* 16 bits */
+#define MEMINT_RSEXIT_EN (1<<8)
+#define MEMINT_CX_SUPR_EN (1<<7)
+#define MEMINT_CONT_BUSY_EN (1<<6)
+#define MEMINT_AVG_BUSY_EN (1<<5)
+#define MEMINT_EVAL_CHG_EN (1<<4)
+#define MEMINT_MON_IDLE_EN (1<<3)
+#define MEMINT_UP_EVAL_EN (1<<2)
+#define MEMINT_DOWN_EVAL_EN (1<<1)
+#define MEMINT_SW_CMD_EN (1<<0)
+#define MEMINTRSTR 0x11182 /* 16 bits */
+#define MEM_RSEXIT_MASK 0xc000
+#define MEM_RSEXIT_SHIFT 14
+#define MEM_CONT_BUSY_MASK 0x3000
+#define MEM_CONT_BUSY_SHIFT 12
+#define MEM_AVG_BUSY_MASK 0x0c00
+#define MEM_AVG_BUSY_SHIFT 10
+#define MEM_EVAL_CHG_MASK 0x0300
+#define MEM_EVAL_BUSY_SHIFT 8
+#define MEM_MON_IDLE_MASK 0x00c0
+#define MEM_MON_IDLE_SHIFT 6
+#define MEM_UP_EVAL_MASK 0x0030
+#define MEM_UP_EVAL_SHIFT 4
+#define MEM_DOWN_EVAL_MASK 0x000c
+#define MEM_DOWN_EVAL_SHIFT 2
+#define MEM_SW_CMD_MASK 0x0003
+#define MEM_INT_STEER_GFX 0
+#define MEM_INT_STEER_CMR 1
+#define MEM_INT_STEER_SMI 2
+#define MEM_INT_STEER_SCI 3
+#define MEMINTRSTS 0x11184
+#define MEMINT_RSEXIT (1<<7)
+#define MEMINT_CONT_BUSY (1<<6)
+#define MEMINT_AVG_BUSY (1<<5)
+#define MEMINT_EVAL_CHG (1<<4)
+#define MEMINT_MON_IDLE (1<<3)
+#define MEMINT_UP_EVAL (1<<2)
+#define MEMINT_DOWN_EVAL (1<<1)
+#define MEMINT_SW_CMD (1<<0)
+#define MEMMODECTL 0x11190
+#define MEMMODE_BOOST_EN (1<<31)
+#define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */
+#define MEMMODE_BOOST_FREQ_SHIFT 24
+#define MEMMODE_IDLE_MODE_MASK 0x00030000
+#define MEMMODE_IDLE_MODE_SHIFT 16
+#define MEMMODE_IDLE_MODE_EVAL 0
+#define MEMMODE_IDLE_MODE_CONT 1
+#define MEMMODE_HWIDLE_EN (1<<15)
+#define MEMMODE_SWMODE_EN (1<<14)
+#define MEMMODE_RCLK_GATE (1<<13)
+#define MEMMODE_HW_UPDATE (1<<12)
+#define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */
+#define MEMMODE_FSTART_SHIFT 8
+#define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */
+#define MEMMODE_FMAX_SHIFT 4
+#define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */
+#define RCBMAXAVG 0x1119c
+#define MEMSWCTL2 0x1119e /* Cantiga only */
+#define SWMEMCMD_RENDER_OFF (0 << 13)
+#define SWMEMCMD_RENDER_ON (1 << 13)
+#define SWMEMCMD_SWFREQ (2 << 13)
+#define SWMEMCMD_TARVID (3 << 13)
+#define SWMEMCMD_VRM_OFF (4 << 13)
+#define SWMEMCMD_VRM_ON (5 << 13)
+#define CMDSTS (1<<12)
+#define SFCAVM (1<<11)
+#define SWFREQ_MASK 0x0380 /* P0-7 */
+#define SWFREQ_SHIFT 7
+#define TARVID_MASK 0x001f
+#define MEMSTAT_CTG 0x111a0
+#define RCBMINAVG 0x111a0
+#define RCUPEI 0x111b0
+#define RCDNEI 0x111b4
+#define MCHBAR_RENDER_STANDBY 0x111b8
+#define RCX_SW_EXIT (1<<23)
+#define RSX_STATUS_MASK 0x00700000
+#define VIDCTL 0x111c0
+#define VIDSTS 0x111c8
+#define VIDSTART 0x111cc /* 8 bits */
+#define MEMSTAT_ILK 0x111f8
+#define MEMSTAT_VID_MASK 0x7f00
+#define MEMSTAT_VID_SHIFT 8
+#define MEMSTAT_PSTATE_MASK 0x00f8
+#define MEMSTAT_PSTATE_SHIFT 3
+#define MEMSTAT_MON_ACTV (1<<2)
+#define MEMSTAT_SRC_CTL_MASK 0x0003
+#define MEMSTAT_SRC_CTL_CORE 0
+#define MEMSTAT_SRC_CTL_TRB 1
+#define MEMSTAT_SRC_CTL_THM 2
+#define MEMSTAT_SRC_CTL_STDBY 3
+#define RCPREVBSYTUPAVG 0x113b8
+#define RCPREVBSYTDNAVG 0x113bc
#define PEG_BAND_GAP_DATA 0x14d68
/*
#define SDVOB_HOTPLUG_INT_EN (1 << 26)
#define SDVOC_HOTPLUG_INT_EN (1 << 25)
#define TV_HOTPLUG_INT_EN (1 << 18)
-#define CRT_EOS_INT_EN (1 << 10)
#define CRT_HOTPLUG_INT_EN (1 << 9)
#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
-#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
- HDMIC_HOTPLUG_INT_EN | \
- HDMID_HOTPLUG_INT_EN | \
- SDVOB_HOTPLUG_INT_EN | \
- SDVOC_HOTPLUG_INT_EN | \
- TV_HOTPLUG_INT_EN | \
- CRT_HOTPLUG_INT_EN)
-
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
#define DPC_HOTPLUG_INT_STATUS (1 << 28)
#define HDMID_HOTPLUG_INT_STATUS (1 << 27)
#define DPD_HOTPLUG_INT_STATUS (1 << 27)
-#define CRT_EOS_INT_STATUS (1 << 12)
#define CRT_HOTPLUG_INT_STATUS (1 << 11)
#define TV_HOTPLUG_INT_STATUS (1 << 10)
#define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define LVDS_ENABLE_DITHER (1 << 25)
/* Enable border for unscaled (or aspect-scaled) display */
#define LVDS_BORDER_ENABLE (1 << 15)
/*
#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
#define DP_SCRAMBLING_DISABLE (1 << 12)
-#define DP_SCRAMBLING_DISABLE_IGDNG (1 << 7)
+#define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7)
/** limit RGB values to avoid confusing TVs */
#define DP_COLOR_RANGE_16_235 (1 << 8)
/* Display & cursor control */
+/* dithering flag on Ironlake */
+#define PIPE_ENABLE_DITHER (1 << 4)
/* Pipe A */
#define PIPEADSL 0x70000
#define PIPEACONF 0x70008
#define DSPARB_AEND_SHIFT 0
#define DSPFW1 0x70034
+#define DSPFW_SR_SHIFT 23
+#define DSPFW_CURSORB_SHIFT 16
+#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
+#define DSPFW_CURSORA_MASK 0x00003f00
+#define DSPFW_CURSORA_SHIFT 8
#define DSPFW3 0x7003c
-#define IGD_SELF_REFRESH_EN (1<<30)
+#define DSPFW_HPLL_SR_EN (1<<31)
+#define DSPFW_CURSOR_SR_SHIFT 24
+#define PINEVIEW_SELF_REFRESH_EN (1<<30)
/* FIFO watermark sizes etc */
+#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
+
+#define G4X_FIFO_SIZE 127
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
+
+#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
-#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
-#define IGD_FIFO_LINE_SIZE 64
-#define IGD_MAX_WM 0x1ff
-#define IGD_DFT_WM 0x3f
-#define IGD_DFT_HPLLOFF_WM 0
-#define IGD_GUARD_WM 10
-#define IGD_CURSOR_FIFO 64
-#define IGD_CURSOR_MAX_WM 0x3f
-#define IGD_CURSOR_DFT_WM 0
-#define IGD_CURSOR_GUARD_WM 5
+#define PINEVIEW_DISPLAY_FIFO 512 /* in 64byte unit */
+#define PINEVIEW_FIFO_LINE_SIZE 64
+#define PINEVIEW_MAX_WM 0x1ff
+#define PINEVIEW_DFT_WM 0x3f
+#define PINEVIEW_DFT_HPLLOFF_WM 0
+#define PINEVIEW_GUARD_WM 10
+#define PINEVIEW_CURSOR_FIFO 64
+#define PINEVIEW_CURSOR_MAX_WM 0x3f
+#define PINEVIEW_CURSOR_DFT_WM 0
+#define PINEVIEW_CURSOR_GUARD_WM 5
/*
* The two pipe frame counter registers are not synchronized, so
#define DISPPLANE_16BPP (0x5<<26)
#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
#define DISPPLANE_32BPP (0x7<<26)
+#define DISPPLANE_32BPP_30BIT_NO_ALPHA (0xa<<26)
#define DISPPLANE_STEREO_ENABLE (1<<25)
#define DISPPLANE_STEREO_DISABLE 0
#define DISPPLANE_SEL_PIPE_MASK (1<<24)
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
-#define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* IGDNG */
+#define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */
#define DISPPLANE_TILED (1<<10)
#define DSPAADDR 0x70184
#define DSPASTRIDE 0x70188
# define VGA_2X_MODE (1 << 30)
# define VGA_PIPE_B_SELECT (1 << 29)
-/* IGDNG */
+/* Ironlake */
#define CPU_VGACNTRL 0x41000
#define DISPLAY_PORT_PLL_BIOS_1 0x46010
#define DISPLAY_PORT_PLL_BIOS_2 0x46014
+#define PCH_DSPCLK_GATE_D 0x42020
+# define DPFDUNIT_CLOCK_GATE_DISABLE (1 << 7)
+# define DPARBUNIT_CLOCK_GATE_DISABLE (1 << 5)
+
+#define PCH_3DCGDIS0 0x46020
+# define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18)
+# define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1)
+
#define FDI_PLL_FREQ_CTL 0x46030
#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24)
#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PF_FILTER_MASK (3<<23)
+#define PF_FILTER_PROGRAMMED (0<<23)
+#define PF_FILTER_MED_3x3 (1<<23)
+#define PF_FILTER_EDGE_ENHANCE (2<<23)
+#define PF_FILTER_EDGE_SOFTEN (3<<23)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
#define PFA_WIN_POS 0x68070
#define DEIER 0x4400c
/* GT interrupt */
+#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
#define SDE_PORTC_HOTPLUG (1 << 9)
#define SDE_PORTB_HOTPLUG (1 << 8)
#define SDE_SDVOB_HOTPLUG (1 << 6)
+#define SDE_HOTPLUG_MASK (0xf << 8)
#define SDEISR 0xc4000
#define SDEIMR 0xc4004
#define PCH_GPIOE 0xc5020
#define PCH_GPIOF 0xc5024
+#define PCH_GMBUS0 0xc5100
+#define PCH_GMBUS1 0xc5104
+#define PCH_GMBUS2 0xc5108
+#define PCH_GMBUS3 0xc510c
+#define PCH_GMBUS4 0xc5110
+#define PCH_GMBUS5 0xc5120
+
#define PCH_DPLL_A 0xc6014
#define PCH_DPLL_B 0xc6018
#define FDI_DP_PORT_WIDTH_X3 (2<<19)
#define FDI_DP_PORT_WIDTH_X4 (3<<19)
#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18)
-/* IGDNG: hardwired to 1 */
+/* Ironlake: hardwired to 1 */
#define FDI_TX_PLL_ENABLE (1<<14)
/* both Tx and Rx */
#define FDI_SCRAMBLING_ENABLE (0<<7)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff