* - delay inquiry
* Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
*
+ * - power condition
+ * Set the power condition field in the START STOP UNIT commands sent by
+ * sd_mod on suspend, resume, and shutdown (if manage_start_stop is on).
+ * Some disks need this to spin down or to resume properly.
+ *
* - override internal blacklist
* Instead of adding to the built-in blacklist, use only the workarounds
* specified in the module load parameter.
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
#define SBP2_INQUIRY_DELAY 12
+#define SBP2_WORKAROUND_POWER_CONDITION 0x20
#define SBP2_WORKAROUND_OVERRIDE 0x100
static int sbp2_param_workarounds;
", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
+ ", set power condition in start stop unit = "
+ __stringify(SBP2_WORKAROUND_POWER_CONDITION)
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
struct sbp2_logical_unit {
struct sbp2_target *tgt;
struct list_head link;
- struct scsi_device *sdev;
struct fw_address_handler address_handler;
struct list_head orb_list;
int generation;
int retries;
struct delayed_work work;
+ bool has_sdev;
+ bool blocked;
};
/*
struct list_head lu_list;
u64 management_agent_address;
+ u64 guid;
int directory_id;
int node_id;
int address_high;
unsigned int workarounds;
unsigned int mgt_orb_timeout;
+
+ int dont_block; /* counter for each logical unit */
+ int blocked; /* ditto */
};
/*
#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-
-#define SBP2_DIRECTION_TO_MEDIA 0x0
-#define SBP2_DIRECTION_FROM_MEDIA 0x1
+#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
+#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
/* Unit directory keys */
#define SBP2_CSR_UNIT_CHARACTERISTICS 0x3a
};
struct sbp2_pointer {
- u32 high;
- u32 low;
+ __be32 high;
+ __be32 low;
};
struct sbp2_orb {
struct {
struct sbp2_pointer password;
struct sbp2_pointer response;
- u32 misc;
- u32 length;
+ __be32 misc;
+ __be32 length;
struct sbp2_pointer status_fifo;
} request;
__be32 response[4];
struct sbp2_status status;
};
-#define LOGIN_RESPONSE_GET_LOGIN_ID(v) ((v).misc & 0xffff)
-#define LOGIN_RESPONSE_GET_LENGTH(v) (((v).misc >> 16) & 0xffff)
-
struct sbp2_login_response {
- u32 misc;
+ __be32 misc;
struct sbp2_pointer command_block_agent;
- u32 reconnect_hold;
+ __be32 reconnect_hold;
};
#define COMMAND_ORB_DATA_SIZE(v) ((v))
#define COMMAND_ORB_PAGE_SIZE(v) ((v) << 16)
#define COMMAND_ORB_PAGE_TABLE_PRESENT ((1) << 19)
#define COMMAND_ORB_MAX_PAYLOAD(v) ((v) << 20)
#define COMMAND_ORB_SPEED(v) ((v) << 24)
-#define COMMAND_ORB_DIRECTION(v) ((v) << 27)
+#define COMMAND_ORB_DIRECTION ((1) << 27)
#define COMMAND_ORB_REQUEST_FORMAT(v) ((v) << 29)
#define COMMAND_ORB_NOTIFY ((1) << 31)
struct {
struct sbp2_pointer next;
struct sbp2_pointer data_descriptor;
- u32 misc;
+ __be32 misc;
u8 command_block[12];
} request;
struct scsi_cmnd *cmd;
.firmware_revision = 0x002800,
.model = 0x001010,
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
- SBP2_WORKAROUND_MODE_SENSE_8,
+ SBP2_WORKAROUND_MODE_SENSE_8 |
+ SBP2_WORKAROUND_POWER_CONDITION,
},
/* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
.firmware_revision = 0x002800,
.model = 0x000000,
- .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY,
+ .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY |
+ SBP2_WORKAROUND_POWER_CONDITION,
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
.model = ~0,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
+ /* PL-3507 bridge with Prolific firmware */ {
+ .firmware_revision = 0x012800,
+ .model = ~0,
+ .workarounds = SBP2_WORKAROUND_POWER_CONDITION,
+ },
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
.model = ~0,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
+ /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+ .firmware_revision = 0x002600,
+ .model = ~0,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
/*
* There are iPods (2nd gen, 3rd gen) with model_id == 0, but
unsigned long flags;
orb->pointer.high = 0;
- orb->pointer.low = orb->request_bus;
- fw_memcpy_to_be32(&orb->pointer, &orb->pointer, sizeof(orb->pointer));
+ orb->pointer.low = cpu_to_be32(orb->request_bus);
spin_lock_irqsave(&device->card->lock, flags);
list_add_tail(&orb->link, &lu->orb_list);
orb->response_bus =
dma_map_single(device->card->device, &orb->response,
sizeof(orb->response), DMA_FROM_DEVICE);
- if (dma_mapping_error(orb->response_bus))
+ if (dma_mapping_error(device->card->device, orb->response_bus))
goto fail_mapping_response;
- orb->request.response.high = 0;
- orb->request.response.low = orb->response_bus;
+ orb->request.response.high = 0;
+ orb->request.response.low = cpu_to_be32(orb->response_bus);
- orb->request.misc =
+ orb->request.misc = cpu_to_be32(
MANAGEMENT_ORB_NOTIFY |
MANAGEMENT_ORB_FUNCTION(function) |
- MANAGEMENT_ORB_LUN(lun_or_login_id);
- orb->request.length =
- MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response));
+ MANAGEMENT_ORB_LUN(lun_or_login_id));
+ orb->request.length = cpu_to_be32(
+ MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response)));
- orb->request.status_fifo.high = lu->address_handler.offset >> 32;
- orb->request.status_fifo.low = lu->address_handler.offset;
+ orb->request.status_fifo.high =
+ cpu_to_be32(lu->address_handler.offset >> 32);
+ orb->request.status_fifo.low =
+ cpu_to_be32(lu->address_handler.offset);
if (function == SBP2_LOGIN_REQUEST) {
/* Ask for 2^2 == 4 seconds reconnect grace period */
- orb->request.misc |=
+ orb->request.misc |= cpu_to_be32(
MANAGEMENT_ORB_RECONNECT(2) |
- MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login);
+ MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login));
timeout = lu->tgt->mgt_orb_timeout;
} else {
timeout = SBP2_ORB_TIMEOUT;
}
- fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
-
init_completion(&orb->done);
orb->base.callback = complete_management_orb;
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus))
goto fail_mapping_request;
sbp2_send_orb(&orb->base, lu, node_id, generation,
sizeof(orb->response), DMA_FROM_DEVICE);
fail_mapping_response:
if (response)
- fw_memcpy_from_be32(response,
- orb->response, sizeof(orb->response));
+ memcpy(response, orb->response, sizeof(orb->response));
kref_put(&orb->base.kref, free_orb);
return retval;
&z, sizeof(z), complete_agent_reset_write_no_wait, t);
}
+static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation)
+{
+ struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card;
+ unsigned long flags;
+
+ /* serialize with comparisons of lu->generation and card->generation */
+ spin_lock_irqsave(&card->lock, flags);
+ lu->generation = generation;
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
+{
+ /*
+ * We may access dont_block without taking card->lock here:
+ * All callers of sbp2_allow_block() and all callers of sbp2_unblock()
+ * are currently serialized against each other.
+ * And a wrong result in sbp2_conditionally_block()'s access of
+ * dont_block is rather harmless, it simply misses its first chance.
+ */
+ --lu->tgt->dont_block;
+}
+
+/*
+ * Blocks lu->tgt if all of the following conditions are met:
+ * - Login, INQUIRY, and high-level SCSI setup of all of the target's
+ * logical units have been finished (indicated by dont_block == 0).
+ * - lu->generation is stale.
+ *
+ * Note, scsi_block_requests() must be called while holding card->lock,
+ * otherwise it might foil sbp2_[conditionally_]unblock()'s attempt to
+ * unblock the target.
+ */
+static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
+{
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (!tgt->dont_block && !lu->blocked &&
+ lu->generation != card->generation) {
+ lu->blocked = true;
+ if (++tgt->blocked == 1)
+ scsi_block_requests(shost);
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/*
+ * Unblocks lu->tgt as soon as all its logical units can be unblocked.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section. On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
+{
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+ bool unblock = false;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (lu->blocked && lu->generation == card->generation) {
+ lu->blocked = false;
+ unblock = --tgt->blocked == 0;
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (unblock)
+ scsi_unblock_requests(shost);
+}
+
+/*
+ * Prevents future blocking of tgt and unblocks it.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section. On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_unblock(struct sbp2_target *tgt)
+{
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ ++tgt->dont_block;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ scsi_unblock_requests(shost);
+}
+
+static int sbp2_lun2int(u16 lun)
+{
+ struct scsi_lun eight_bytes_lun;
+
+ memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
+ eight_bytes_lun.scsi_lun[0] = (lun >> 8) & 0xff;
+ eight_bytes_lun.scsi_lun[1] = lun & 0xff;
+
+ return scsilun_to_int(&eight_bytes_lun);
+}
+
static void sbp2_release_target(struct kref *kref)
{
struct sbp2_target *tgt = container_of(kref, struct sbp2_target, kref);
struct sbp2_logical_unit *lu, *next;
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ struct scsi_device *sdev;
+ struct fw_device *device = fw_device(tgt->unit->device.parent);
- list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
- if (lu->sdev)
- scsi_remove_device(lu->sdev);
+ /* prevent deadlocks */
+ sbp2_unblock(tgt);
+ list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
+ sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ }
sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
kfree(lu);
}
scsi_remove_host(shost);
- fw_notify("released %s\n", tgt->bus_id);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
- put_device(&tgt->unit->device);
+ fw_unit_put(tgt->unit);
scsi_host_put(shost);
+ fw_device_put(device);
}
static struct workqueue_struct *sbp2_wq;
kref_put(&tgt->kref, sbp2_release_target);
}
+static void
+complete_set_busy_timeout(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *done)
+{
+ complete(done);
+}
+
+/*
+ * Write retransmit retry values into the BUSY_TIMEOUT register.
+ * - The single-phase retry protocol is supported by all SBP-2 devices, but the
+ * default retry_limit value is 0 (i.e. never retry transmission). We write a
+ * saner value after logging into the device.
+ * - The dual-phase retry protocol is optional to implement, and if not
+ * supported, writes to the dual-phase portion of the register will be
+ * ignored. We try to write the original 1394-1995 default here.
+ * - In the case of devices that are also SBP-3-compliant, all writes are
+ * ignored, as the register is read-only, but contains single-phase retry of
+ * 15, which is what we're trying to set for all SBP-2 device anyway, so this
+ * write attempt is safe and yields more consistent behavior for all devices.
+ *
+ * See section 8.3.2.3.5 of the 1394-1995 spec, section 6.2 of the SBP-2 spec,
+ * and section 6.4 of the SBP-3 spec for further details.
+ */
+static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
+{
+ struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ DECLARE_COMPLETION_ONSTACK(done);
+ struct fw_transaction t;
+ static __be32 busy_timeout;
+
+ busy_timeout = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT);
+
+ fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+ lu->tgt->node_id, lu->generation, device->max_speed,
+ CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout,
+ sizeof(busy_timeout), complete_set_busy_timeout, &done);
+ wait_for_completion(&done);
+}
+
static void sbp2_reconnect(struct work_struct *work);
static void sbp2_login(struct work_struct *work)
struct fw_device *device = fw_device(tgt->unit->device.parent);
struct Scsi_Host *shost;
struct scsi_device *sdev;
- struct scsi_lun eight_bytes_lun;
struct sbp2_login_response response;
int generation, node_id, local_node_id;
local_node_id = device->card->node_id;
/* If this is a re-login attempt, log out, or we might be rejected. */
- if (lu->sdev)
+ if (lu->has_sdev)
sbp2_send_management_orb(lu, device->node_id, generation,
SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
if (sbp2_send_management_orb(lu, node_id, generation,
SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
- if (lu->retries++ < 5)
+ if (lu->retries++ < 5) {
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
- else
+ } else {
fw_error("%s: failed to login to LUN %04x\n",
tgt->bus_id, lu->lun);
+ /* Let any waiting I/O fail from now on. */
+ sbp2_unblock(lu->tgt);
+ }
goto out;
}
- lu->generation = generation;
tgt->node_id = node_id;
tgt->address_high = local_node_id << 16;
+ sbp2_set_generation(lu, generation);
- /* Get command block agent offset and login id. */
lu->command_block_agent_address =
- ((u64) (response.command_block_agent.high & 0xffff) << 32) |
- response.command_block_agent.low;
- lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
+ ((u64)(be32_to_cpu(response.command_block_agent.high) & 0xffff)
+ << 32) | be32_to_cpu(response.command_block_agent.low);
+ lu->login_id = be32_to_cpu(response.misc) & 0xffff;
fw_notify("%s: logged in to LUN %04x (%d retries)\n",
tgt->bus_id, lu->lun, lu->retries);
-#if 0
- /* FIXME: The linux1394 sbp2 does this last step. */
- sbp2_set_busy_timeout(scsi_id);
-#endif
+ /* set appropriate retry limit(s) in BUSY_TIMEOUT register */
+ sbp2_set_busy_timeout(lu);
PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
sbp2_agent_reset(lu);
/* This was a re-login. */
- if (lu->sdev) {
+ if (lu->has_sdev) {
sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
goto out;
}
if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
ssleep(SBP2_INQUIRY_DELAY);
- memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
- eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff;
- eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff;
shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ sdev = __scsi_add_device(shost, 0, 0, sbp2_lun2int(lu->lun), lu);
+ /*
+ * FIXME: We are unable to perform reconnects while in sbp2_login().
+ * Therefore __scsi_add_device() will get into trouble if a bus reset
+ * happens in parallel. It will either fail or leave us with an
+ * unusable sdev. As a workaround we check for this and retry the
+ * whole login and SCSI probing.
+ */
- sdev = __scsi_add_device(shost, 0, 0,
- scsilun_to_int(&eight_bytes_lun), lu);
- if (IS_ERR(sdev)) {
- smp_rmb(); /* generation may have changed */
- generation = device->generation;
- smp_rmb(); /* node_id must not be older than generation */
+ /* Reported error during __scsi_add_device() */
+ if (IS_ERR(sdev))
+ goto out_logout_login;
- sbp2_send_management_orb(lu, device->node_id, generation,
- SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
- /*
- * Set this back to sbp2_login so we fall back and
- * retry login on bus reset.
- */
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- } else {
- lu->sdev = sdev;
+ /* Unreported error during __scsi_add_device() */
+ smp_rmb(); /* get current card generation */
+ if (generation != device->card->generation) {
+ scsi_remove_device(sdev);
scsi_device_put(sdev);
+ goto out_logout_login;
}
+
+ /* No error during __scsi_add_device() */
+ lu->has_sdev = true;
+ scsi_device_put(sdev);
+ sbp2_allow_block(lu);
+ goto out;
+
+ out_logout_login:
+ smp_rmb(); /* generation may have changed */
+ generation = device->generation;
+ smp_rmb(); /* node_id must not be older than generation */
+
+ sbp2_send_management_orb(lu, device->node_id, generation,
+ SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+ /*
+ * If a bus reset happened, sbp2_update will have requeued
+ * lu->work already. Reset the work from reconnect to login.
+ */
+ PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
out:
sbp2_target_put(tgt);
}
return -ENOMEM;
}
- lu->tgt = tgt;
- lu->sdev = NULL;
- lu->lun = lun_entry & 0xffff;
- lu->retries = 0;
+ lu->tgt = tgt;
+ lu->lun = lun_entry & 0xffff;
+ lu->retries = 0;
+ lu->has_sdev = false;
+ lu->blocked = false;
+ ++tgt->dont_block;
INIT_LIST_HEAD(&lu->orb_list);
INIT_DELAYED_WORK(&lu->work, sbp2_login);
break;
case SBP2_CSR_LOGICAL_UNIT_DIRECTORY:
- if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0)
+ /* Adjust for the increment in the iterator */
+ if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0)
return -ENOMEM;
break;
}
kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
tgt->bus_id = unit->device.bus_id;
+ tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
if (fw_device_enable_phys_dma(device) < 0)
goto fail_shost_put;
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
+ fw_device_get(device);
+ fw_unit_get(unit);
+
/* Initialize to values that won't match anything in our table. */
firmware_revision = 0xff000000;
model = 0xff000000;
sbp2_init_workarounds(tgt, model, firmware_revision);
- get_device(&unit->device);
-
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
sbp2_queue_work(lu, 0);
goto out;
}
- lu->generation = generation;
tgt->node_id = node_id;
tgt->address_high = local_node_id << 16;
+ sbp2_set_generation(lu, generation);
fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
tgt->bus_id, lu->lun, lu->retries);
sbp2_agent_reset(lu);
sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
out:
sbp2_target_put(tgt);
}
* Iteration over tgt->lu_list is therefore safe here.
*/
list_for_each_entry(lu, &tgt->lu_list, link) {
+ sbp2_conditionally_block(lu);
lu->retries = 0;
sbp2_queue_work(lu, 0);
}
* or when sending the write (less likely).
*/
result = DID_BUS_BUSY << 16;
+ sbp2_conditionally_block(orb->lu);
}
dma_unmap_single(device->card->device, orb->base.request_bus,
* tables.
*/
if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) {
- orb->request.data_descriptor.high = lu->tgt->address_high;
- orb->request.data_descriptor.low = sg_dma_address(sg);
- orb->request.misc |= COMMAND_ORB_DATA_SIZE(sg_dma_len(sg));
+ orb->request.data_descriptor.high =
+ cpu_to_be32(lu->tgt->address_high);
+ orb->request.data_descriptor.low =
+ cpu_to_be32(sg_dma_address(sg));
+ orb->request.misc |=
+ cpu_to_be32(COMMAND_ORB_DATA_SIZE(sg_dma_len(sg)));
return 0;
}
goto fail_page_table;
}
l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH);
- orb->page_table[j].low = sg_addr;
- orb->page_table[j].high = (l << 16);
+ orb->page_table[j].low = cpu_to_be32(sg_addr);
+ orb->page_table[j].high = cpu_to_be32(l << 16);
sg_addr += l;
sg_len -= l;
j++;
}
}
- fw_memcpy_to_be32(orb->page_table, orb->page_table,
- sizeof(orb->page_table[0]) * j);
orb->page_table_bus =
dma_map_single(device->card->device, orb->page_table,
sizeof(orb->page_table), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->page_table_bus))
+ if (dma_mapping_error(device->card->device, orb->page_table_bus))
goto fail_page_table;
/*
* initiator (i.e. us), but data_descriptor can refer to data
* on other nodes so we need to put our ID in descriptor.high.
*/
- orb->request.data_descriptor.high = lu->tgt->address_high;
- orb->request.data_descriptor.low = orb->page_table_bus;
- orb->request.misc |=
- COMMAND_ORB_PAGE_TABLE_PRESENT |
- COMMAND_ORB_DATA_SIZE(j);
+ orb->request.data_descriptor.high = cpu_to_be32(lu->tgt->address_high);
+ orb->request.data_descriptor.low = cpu_to_be32(orb->page_table_bus);
+ orb->request.misc |= cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT |
+ COMMAND_ORB_DATA_SIZE(j));
return 0;
orb->done = done;
orb->cmd = cmd;
- orb->request.next.high = SBP2_ORB_NULL;
- orb->request.next.low = 0x0;
+ orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
/*
* At speed 100 we can do 512 bytes per packet, at speed 200,
* 1024 bytes per packet etc. The SBP-2 max_payload field
*/
max_payload = min(device->max_speed + 7,
device->card->max_receive - 1);
- orb->request.misc =
+ orb->request.misc = cpu_to_be32(
COMMAND_ORB_MAX_PAYLOAD(max_payload) |
COMMAND_ORB_SPEED(device->max_speed) |
- COMMAND_ORB_NOTIFY;
+ COMMAND_ORB_NOTIFY);
if (cmd->sc_data_direction == DMA_FROM_DEVICE)
- orb->request.misc |=
- COMMAND_ORB_DIRECTION(SBP2_DIRECTION_FROM_MEDIA);
- else if (cmd->sc_data_direction == DMA_TO_DEVICE)
- orb->request.misc |=
- COMMAND_ORB_DIRECTION(SBP2_DIRECTION_TO_MEDIA);
+ orb->request.misc |= cpu_to_be32(COMMAND_ORB_DIRECTION);
if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
goto out;
- fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
-
- memset(orb->request.command_block,
- 0, sizeof(orb->request.command_block));
- memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+ memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
orb->base.callback = complete_command_orb;
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus))
goto out;
sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, lu->generation,
{
struct sbp2_logical_unit *lu = sdev->hostdata;
+ /* (Re-)Adding logical units via the SCSI stack is not supported. */
+ if (!lu)
+ return -ENOSYS;
+
sdev->allow_restart = 1;
- /*
- * Update the dma alignment (minimum alignment requirements for
- * start and end of DMA transfers) to be a sector
- */
- blk_queue_update_dma_alignment(sdev->request_queue, 511);
+ /* SBP-2 requires quadlet alignment of the data buffers. */
+ blk_queue_update_dma_alignment(sdev->request_queue, 4 - 1);
if (lu->tgt->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
sdev->use_10_for_rw = 1;
+ if (sbp2_param_exclusive_login)
+ sdev->manage_start_stop = 1;
+
if (sdev->type == TYPE_ROM)
sdev->use_10_for_ms = 1;
if (lu->tgt->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
sdev->fix_capacity = 1;
+ if (lu->tgt->workarounds & SBP2_WORKAROUND_POWER_CONDITION)
+ sdev->start_stop_pwr_cond = 1;
+
if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
{
struct scsi_device *sdev = to_scsi_device(dev);
struct sbp2_logical_unit *lu;
- struct fw_device *device;
if (!sdev)
return 0;
lu = sdev->hostdata;
- device = fw_device(lu->tgt->unit->device.parent);
- return sprintf(buf, "%08x%08x:%06x:%04x\n",
- device->config_rom[3], device->config_rom[4],
+ return sprintf(buf, "%016llx:%06x:%04x\n",
+ (unsigned long long)lu->tgt->guid,
lu->tgt->directory_id, lu->lun);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff