*/
#include <linux/blkdev.h>
+#include <linux/bug.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
* - delay inquiry
* Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
*
+ * - power condition
+ * Set the power condition field in the START STOP UNIT commands sent by
+ * sd_mod on suspend, resume, and shutdown (if manage_start_stop is on).
+ * Some disks need this to spin down or to resume properly.
+ *
* - override internal blacklist
* Instead of adding to the built-in blacklist, use only the workarounds
* specified in the module load parameter.
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
#define SBP2_INQUIRY_DELAY 12
+#define SBP2_WORKAROUND_POWER_CONDITION 0x20
#define SBP2_WORKAROUND_OVERRIDE 0x100
static int sbp2_param_workarounds;
", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
+ ", set power condition in start stop unit = "
+ __stringify(SBP2_WORKAROUND_POWER_CONDITION)
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
struct list_head lu_list;
u64 management_agent_address;
+ u64 guid;
int directory_id;
int node_id;
int address_high;
unsigned int workarounds;
unsigned int mgt_orb_timeout;
+ unsigned int max_payload;
int dont_block; /* counter for each logical unit */
int blocked; /* ditto */
};
+/* Impossible login_id, to detect logout attempt before successful login */
+#define INVALID_LOGIN_ID 0x10000
+
/*
* Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
* provided in the config rom. Most devices do provide a value, which
#define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */
#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
-#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
+#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
+#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
-#define SBP2_DIRECTION_TO_MEDIA 0x0
-#define SBP2_DIRECTION_FROM_MEDIA 0x1
+/*
+ * The default maximum s/g segment size of a FireWire controller is
+ * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
+ * be quadlet-aligned, we set the length limit to 0xffff & ~3.
+ */
+#define SBP2_MAX_SEG_SIZE 0xfffc
/* Unit directory keys */
#define SBP2_CSR_UNIT_CHARACTERISTICS 0x3a
};
struct sbp2_pointer {
- u32 high;
- u32 low;
+ __be32 high;
+ __be32 low;
};
struct sbp2_orb {
struct {
struct sbp2_pointer password;
struct sbp2_pointer response;
- u32 misc;
- u32 length;
+ __be32 misc;
+ __be32 length;
struct sbp2_pointer status_fifo;
} request;
__be32 response[4];
struct sbp2_status status;
};
-#define LOGIN_RESPONSE_GET_LOGIN_ID(v) ((v).misc & 0xffff)
-#define LOGIN_RESPONSE_GET_LENGTH(v) (((v).misc >> 16) & 0xffff)
-
struct sbp2_login_response {
- u32 misc;
+ __be32 misc;
struct sbp2_pointer command_block_agent;
- u32 reconnect_hold;
+ __be32 reconnect_hold;
};
#define COMMAND_ORB_DATA_SIZE(v) ((v))
#define COMMAND_ORB_PAGE_SIZE(v) ((v) << 16)
#define COMMAND_ORB_PAGE_TABLE_PRESENT ((1) << 19)
#define COMMAND_ORB_MAX_PAYLOAD(v) ((v) << 20)
#define COMMAND_ORB_SPEED(v) ((v) << 24)
-#define COMMAND_ORB_DIRECTION(v) ((v) << 27)
+#define COMMAND_ORB_DIRECTION ((1) << 27)
#define COMMAND_ORB_REQUEST_FORMAT(v) ((v) << 29)
#define COMMAND_ORB_NOTIFY ((1) << 31)
struct {
struct sbp2_pointer next;
struct sbp2_pointer data_descriptor;
- u32 misc;
+ __be32 misc;
u8 command_block[12];
} request;
struct scsi_cmnd *cmd;
dma_addr_t page_table_bus;
};
+#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */
+#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */
+
/*
* List of devices with known bugs.
*
* The firmware_revision field, masked with 0xffff00, is the best
* indicator for the type of bridge chip of a device. It yields a few
* false positives but this did not break correctly behaving devices
- * so far. We use ~0 as a wildcard, since the 24 bit values we get
- * from the config rom can never match that.
+ * so far.
*/
static const struct {
u32 firmware_revision;
.firmware_revision = 0x002800,
.model = 0x001010,
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
- SBP2_WORKAROUND_MODE_SENSE_8,
+ SBP2_WORKAROUND_MODE_SENSE_8 |
+ SBP2_WORKAROUND_POWER_CONDITION,
},
/* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
.firmware_revision = 0x002800,
.model = 0x000000,
- .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY,
+ .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY |
+ SBP2_WORKAROUND_POWER_CONDITION,
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
+ /* PL-3507 bridge with Prolific firmware */ {
+ .firmware_revision = 0x012800,
+ .model = SBP2_ROM_VALUE_WILDCARD,
+ .workarounds = SBP2_WORKAROUND_POWER_CONDITION,
+ },
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
.firmware_revision = 0x002600,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
-
/*
- * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
- * these iPods do not feature the read_capacity bug according
- * to one report. Read_capacity behaviour as well as model_id
- * could change due to Apple-supplied firmware updates though.
+ * iPod 2nd generation: needs 128k max transfer size workaround
+ * iPod 3rd generation: needs fix capacity workaround
*/
-
- /* iPod 4th generation. */ {
+ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS |
+ SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
+ .model = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
.model = 0x000023,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
}
};
-static void
-free_orb(struct kref *kref)
+static void free_orb(struct kref *kref)
{
struct sbp2_orb *orb = container_of(kref, struct sbp2_orb, kref);
kfree(orb);
}
-static void
-sbp2_status_write(struct fw_card *card, struct fw_request *request,
- int tcode, int destination, int source,
- int generation, int speed,
- unsigned long long offset,
- void *payload, size_t length, void *callback_data)
+static void sbp2_status_write(struct fw_card *card, struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
{
struct sbp2_logical_unit *lu = callback_data;
struct sbp2_orb *orb;
fw_send_response(card, request, RCODE_COMPLETE);
}
-static void
-complete_transaction(struct fw_card *card, int rcode,
- void *payload, size_t length, void *data)
+static void complete_transaction(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
{
struct sbp2_orb *orb = data;
unsigned long flags;
kref_put(&orb->kref, free_orb);
}
-static void
-sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
- int node_id, int generation, u64 offset)
+static void sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
+ int node_id, int generation, u64 offset)
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
unsigned long flags;
orb->pointer.high = 0;
- orb->pointer.low = orb->request_bus;
- fw_memcpy_to_be32(&orb->pointer, &orb->pointer, sizeof(orb->pointer));
+ orb->pointer.low = cpu_to_be32(orb->request_bus);
spin_lock_irqsave(&device->card->lock, flags);
list_add_tail(&orb->link, &lu->orb_list);
return retval;
}
-static void
-complete_management_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
+static void complete_management_orb(struct sbp2_orb *base_orb,
+ struct sbp2_status *status)
{
struct sbp2_management_orb *orb =
container_of(base_orb, struct sbp2_management_orb, base);
complete(&orb->done);
}
-static int
-sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
- int generation, int function, int lun_or_login_id,
- void *response)
+static int sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
+ int generation, int function,
+ int lun_or_login_id, void *response)
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct sbp2_management_orb *orb;
orb->response_bus =
dma_map_single(device->card->device, &orb->response,
sizeof(orb->response), DMA_FROM_DEVICE);
- if (dma_mapping_error(orb->response_bus))
+ if (dma_mapping_error(device->card->device, orb->response_bus))
goto fail_mapping_response;
- orb->request.response.high = 0;
- orb->request.response.low = orb->response_bus;
+ orb->request.response.high = 0;
+ orb->request.response.low = cpu_to_be32(orb->response_bus);
- orb->request.misc =
+ orb->request.misc = cpu_to_be32(
MANAGEMENT_ORB_NOTIFY |
MANAGEMENT_ORB_FUNCTION(function) |
- MANAGEMENT_ORB_LUN(lun_or_login_id);
- orb->request.length =
- MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response));
+ MANAGEMENT_ORB_LUN(lun_or_login_id));
+ orb->request.length = cpu_to_be32(
+ MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response)));
- orb->request.status_fifo.high = lu->address_handler.offset >> 32;
- orb->request.status_fifo.low = lu->address_handler.offset;
+ orb->request.status_fifo.high =
+ cpu_to_be32(lu->address_handler.offset >> 32);
+ orb->request.status_fifo.low =
+ cpu_to_be32(lu->address_handler.offset);
if (function == SBP2_LOGIN_REQUEST) {
/* Ask for 2^2 == 4 seconds reconnect grace period */
- orb->request.misc |=
+ orb->request.misc |= cpu_to_be32(
MANAGEMENT_ORB_RECONNECT(2) |
- MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login);
+ MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login));
timeout = lu->tgt->mgt_orb_timeout;
} else {
timeout = SBP2_ORB_TIMEOUT;
}
- fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
-
init_completion(&orb->done);
orb->base.callback = complete_management_orb;
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus))
goto fail_mapping_request;
sbp2_send_orb(&orb->base, lu, node_id, generation,
sizeof(orb->response), DMA_FROM_DEVICE);
fail_mapping_response:
if (response)
- fw_memcpy_from_be32(response,
- orb->response, sizeof(orb->response));
+ memcpy(response, orb->response, sizeof(orb->response));
kref_put(&orb->base.kref, free_orb);
return retval;
}
-static void
-complete_agent_reset_write(struct fw_card *card, int rcode,
- void *payload, size_t length, void *done)
-{
- complete(done);
-}
-
static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
- DECLARE_COMPLETION_ONSTACK(done);
- struct fw_transaction t;
- static u32 z;
+ __be32 d = 0;
- fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
- lu->tgt->node_id, lu->generation, device->max_speed,
- lu->command_block_agent_address + SBP2_AGENT_RESET,
- &z, sizeof(z), complete_agent_reset_write, &done);
- wait_for_completion(&done);
+ fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
+ lu->tgt->node_id, lu->generation, device->max_speed,
+ lu->command_block_agent_address + SBP2_AGENT_RESET,
+ &d, sizeof(d));
}
-static void
-complete_agent_reset_write_no_wait(struct fw_card *card, int rcode,
- void *payload, size_t length, void *data)
+static void complete_agent_reset_write_no_wait(struct fw_card *card,
+ int rcode, void *payload, size_t length, void *data)
{
kfree(data);
}
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct fw_transaction *t;
- static u32 z;
+ static __be32 d;
t = kmalloc(sizeof(*t), GFP_ATOMIC);
if (t == NULL)
fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
lu->tgt->node_id, lu->generation, device->max_speed,
lu->command_block_agent_address + SBP2_AGENT_RESET,
- &z, sizeof(z), complete_agent_reset_write_no_wait, t);
-}
-
-static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation)
-{
- struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card;
- unsigned long flags;
-
- /* serialize with comparisons of lu->generation and card->generation */
- spin_lock_irqsave(&card->lock, flags);
- lu->generation = generation;
- spin_unlock_irqrestore(&card->lock, flags);
+ &d, sizeof(d), complete_agent_reset_write_no_wait, t);
}
static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
if (!tgt->dont_block && !lu->blocked &&
lu->generation != card->generation) {
lu->blocked = true;
- if (++tgt->blocked == 1) {
+ if (++tgt->blocked == 1)
scsi_block_requests(shost);
- fw_notify("blocked %s\n", lu->tgt->bus_id);
- }
}
spin_unlock_irqrestore(&card->lock, flags);
}
}
spin_unlock_irqrestore(&card->lock, flags);
- if (unblock) {
+ if (unblock)
scsi_unblock_requests(shost);
- fw_notify("unblocked %s\n", lu->tgt->bus_id);
- }
}
/*
scsi_remove_device(sdev);
scsi_device_put(sdev);
}
- sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
- SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
-
+ if (lu->login_id != INVALID_LOGIN_ID) {
+ int generation, node_id;
+ /*
+ * tgt->node_id may be obsolete here if we failed
+ * during initial login or after a bus reset where
+ * the topology changed.
+ */
+ generation = device->generation;
+ smp_rmb(); /* node_id vs. generation */
+ node_id = device->node_id;
+ sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_LOGOUT_REQUEST,
+ lu->login_id, NULL);
+ }
fw_core_remove_address_handler(&lu->address_handler);
list_del(&lu->link);
kfree(lu);
}
scsi_remove_host(shost);
- fw_notify("released %s\n", tgt->bus_id);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
fw_unit_put(tgt->unit);
scsi_host_put(shost);
static struct workqueue_struct *sbp2_wq;
-/*
- * Always get the target's kref when scheduling work on one its units.
- * Each workqueue job is responsible to call sbp2_target_put() upon return.
- */
-static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
-{
- if (queue_delayed_work(sbp2_wq, &lu->work, delay))
- kref_get(&lu->tgt->kref);
-}
-
static void sbp2_target_put(struct sbp2_target *tgt)
{
kref_put(&tgt->kref, sbp2_release_target);
}
-static void
-complete_set_busy_timeout(struct fw_card *card, int rcode,
- void *payload, size_t length, void *done)
+/*
+ * Always get the target's kref when scheduling work on one its units.
+ * Each workqueue job is responsible to call sbp2_target_put() upon return.
+ */
+static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
{
- complete(done);
+ kref_get(&lu->tgt->kref);
+ if (!queue_delayed_work(sbp2_wq, &lu->work, delay))
+ sbp2_target_put(lu->tgt);
}
+/*
+ * Write retransmit retry values into the BUSY_TIMEOUT register.
+ * - The single-phase retry protocol is supported by all SBP-2 devices, but the
+ * default retry_limit value is 0 (i.e. never retry transmission). We write a
+ * saner value after logging into the device.
+ * - The dual-phase retry protocol is optional to implement, and if not
+ * supported, writes to the dual-phase portion of the register will be
+ * ignored. We try to write the original 1394-1995 default here.
+ * - In the case of devices that are also SBP-3-compliant, all writes are
+ * ignored, as the register is read-only, but contains single-phase retry of
+ * 15, which is what we're trying to set for all SBP-2 device anyway, so this
+ * write attempt is safe and yields more consistent behavior for all devices.
+ *
+ * See section 8.3.2.3.5 of the 1394-1995 spec, section 6.2 of the SBP-2 spec,
+ * and section 6.4 of the SBP-3 spec for further details.
+ */
static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
- DECLARE_COMPLETION_ONSTACK(done);
- struct fw_transaction t;
- static __be32 busy_timeout;
-
- /* FIXME: we should try to set dual-phase cycle_limit too */
- busy_timeout = cpu_to_be32(SBP2_RETRY_LIMIT);
+ __be32 d = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT);
- fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
- lu->tgt->node_id, lu->generation, device->max_speed,
- CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout,
- sizeof(busy_timeout), complete_set_busy_timeout, &done);
- wait_for_completion(&done);
+ fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
+ lu->tgt->node_id, lu->generation, device->max_speed,
+ CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT,
+ &d, sizeof(d));
}
static void sbp2_reconnect(struct work_struct *work);
goto out;
generation = device->generation;
- smp_rmb(); /* node_id must not be older than generation */
+ smp_rmb(); /* node IDs must not be older than generation */
node_id = device->node_id;
local_node_id = device->card->node_id;
tgt->node_id = node_id;
tgt->address_high = local_node_id << 16;
- sbp2_set_generation(lu, generation);
+ smp_wmb(); /* node IDs must not be older than generation */
+ lu->generation = generation;
- /* Get command block agent offset and login id. */
lu->command_block_agent_address =
- ((u64) (response.command_block_agent.high & 0xffff) << 32) |
- response.command_block_agent.low;
- lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
+ ((u64)(be32_to_cpu(response.command_block_agent.high) & 0xffff)
+ << 32) | be32_to_cpu(response.command_block_agent.low);
+ lu->login_id = be32_to_cpu(response.misc) & 0xffff;
fw_notify("%s: logged in to LUN %04x (%d retries)\n",
tgt->bus_id, lu->lun, lu->retries);
lu->tgt = tgt;
lu->lun = lun_entry & 0xffff;
+ lu->login_id = INVALID_LOGIN_ID;
lu->retries = 0;
lu->has_sdev = false;
lu->blocked = false;
break;
case SBP2_CSR_LOGICAL_UNIT_DIRECTORY:
- if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0)
+ /* Adjust for the increment in the iterator */
+ if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0)
return -ENOMEM;
break;
}
continue;
if (sbp2_workarounds_table[i].model != model &&
- sbp2_workarounds_table[i].model != ~0)
+ sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
continue;
w |= sbp2_workarounds_table[i].workarounds;
struct Scsi_Host *shost;
u32 model, firmware_revision;
+ if (dma_get_max_seg_size(device->card->device) > SBP2_MAX_SEG_SIZE)
+ BUG_ON(dma_set_max_seg_size(device->card->device,
+ SBP2_MAX_SEG_SIZE));
+
shost = scsi_host_alloc(&scsi_driver_template, sizeof(*tgt));
if (shost == NULL)
return -ENOMEM;
tgt->unit = unit;
kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
- tgt->bus_id = unit->device.bus_id;
+ tgt->bus_id = dev_name(&unit->device);
+ tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
if (fw_device_enable_phys_dma(device) < 0)
goto fail_shost_put;
fw_device_get(device);
fw_unit_get(unit);
- /* Initialize to values that won't match anything in our table. */
- firmware_revision = 0xff000000;
- model = 0xff000000;
-
/* implicit directory ID */
tgt->directory_id = ((unit->directory - device->config_rom) * 4
+ CSR_CONFIG_ROM) & 0xffffff;
+ firmware_revision = SBP2_ROM_VALUE_MISSING;
+ model = SBP2_ROM_VALUE_MISSING;
+
if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
&firmware_revision) < 0)
goto fail_tgt_put;
sbp2_init_workarounds(tgt, model, firmware_revision);
+ /*
+ * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+ * and so on up to 4096 bytes. The SBP-2 max_payload field
+ * specifies the max payload size as 2 ^ (max_payload + 2), so
+ * if we set this to max_speed + 7, we get the right value.
+ */
+ tgt->max_payload = min(device->max_speed + 7, 10U);
+ tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
- sbp2_queue_work(lu, 0);
+ sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
return 0;
fail_tgt_put:
goto out;
generation = device->generation;
- smp_rmb(); /* node_id must not be older than generation */
+ smp_rmb(); /* node IDs must not be older than generation */
node_id = device->node_id;
local_node_id = device->card->node_id;
tgt->node_id = node_id;
tgt->address_high = local_node_id << 16;
- sbp2_set_generation(lu, generation);
+ smp_wmb(); /* node IDs must not be older than generation */
+ lu->generation = generation;
fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
tgt->bus_id, lu->lun, lu->retries);
.id_table = sbp2_id_table,
};
-static unsigned int
-sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
+static void sbp2_unmap_scatterlist(struct device *card_device,
+ struct sbp2_command_orb *orb)
+{
+ if (scsi_sg_count(orb->cmd))
+ dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+ scsi_sg_count(orb->cmd),
+ orb->cmd->sc_data_direction);
+
+ if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+ dma_unmap_single(card_device, orb->page_table_bus,
+ sizeof(orb->page_table), DMA_TO_DEVICE);
+}
+
+static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
{
int sam_status;
}
}
-static void
-complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
+static void complete_command_orb(struct sbp2_orb *base_orb,
+ struct sbp2_status *status)
{
struct sbp2_command_orb *orb =
container_of(base_orb, struct sbp2_command_orb, base);
dma_unmap_single(device->card->device, orb->base.request_bus,
sizeof(orb->request), DMA_TO_DEVICE);
-
- if (scsi_sg_count(orb->cmd) > 0)
- dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
- scsi_sg_count(orb->cmd),
- orb->cmd->sc_data_direction);
-
- if (orb->page_table_bus != 0)
- dma_unmap_single(device->card->device, orb->page_table_bus,
- sizeof(orb->page_table), DMA_TO_DEVICE);
+ sbp2_unmap_scatterlist(device->card->device, orb);
orb->cmd->result = result;
orb->done(orb->cmd);
}
-static int
-sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device,
- struct sbp2_logical_unit *lu)
+static int sbp2_map_scatterlist(struct sbp2_command_orb *orb,
+ struct fw_device *device, struct sbp2_logical_unit *lu)
{
- struct scatterlist *sg;
- int sg_len, l, i, j, count;
- dma_addr_t sg_addr;
-
- sg = scsi_sglist(orb->cmd);
- count = dma_map_sg(device->card->device, sg, scsi_sg_count(orb->cmd),
- orb->cmd->sc_data_direction);
- if (count == 0)
+ struct scatterlist *sg = scsi_sglist(orb->cmd);
+ int i, n;
+
+ n = dma_map_sg(device->card->device, sg, scsi_sg_count(orb->cmd),
+ orb->cmd->sc_data_direction);
+ if (n == 0)
goto fail;
/*
* as the second generation iPod which doesn't support page
* tables.
*/
- if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) {
- orb->request.data_descriptor.high = lu->tgt->address_high;
- orb->request.data_descriptor.low = sg_dma_address(sg);
- orb->request.misc |= COMMAND_ORB_DATA_SIZE(sg_dma_len(sg));
+ if (n == 1) {
+ orb->request.data_descriptor.high =
+ cpu_to_be32(lu->tgt->address_high);
+ orb->request.data_descriptor.low =
+ cpu_to_be32(sg_dma_address(sg));
+ orb->request.misc |=
+ cpu_to_be32(COMMAND_ORB_DATA_SIZE(sg_dma_len(sg)));
return 0;
}
- /*
- * Convert the scatterlist to an sbp2 page table. If any
- * scatterlist entries are too big for sbp2, we split them as we
- * go. Even if we ask the block I/O layer to not give us sg
- * elements larger than 65535 bytes, some IOMMUs may merge sg elements
- * during DMA mapping, and Linux currently doesn't prevent this.
- */
- for (i = 0, j = 0; i < count; i++, sg = sg_next(sg)) {
- sg_len = sg_dma_len(sg);
- sg_addr = sg_dma_address(sg);
- while (sg_len) {
- /* FIXME: This won't get us out of the pinch. */
- if (unlikely(j >= ARRAY_SIZE(orb->page_table))) {
- fw_error("page table overflow\n");
- goto fail_page_table;
- }
- l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH);
- orb->page_table[j].low = sg_addr;
- orb->page_table[j].high = (l << 16);
- sg_addr += l;
- sg_len -= l;
- j++;
- }
+ for_each_sg(sg, sg, n, i) {
+ orb->page_table[i].high = cpu_to_be32(sg_dma_len(sg) << 16);
+ orb->page_table[i].low = cpu_to_be32(sg_dma_address(sg));
}
- fw_memcpy_to_be32(orb->page_table, orb->page_table,
- sizeof(orb->page_table[0]) * j);
orb->page_table_bus =
dma_map_single(device->card->device, orb->page_table,
sizeof(orb->page_table), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->page_table_bus))
+ if (dma_mapping_error(device->card->device, orb->page_table_bus))
goto fail_page_table;
/*
* initiator (i.e. us), but data_descriptor can refer to data
* on other nodes so we need to put our ID in descriptor.high.
*/
- orb->request.data_descriptor.high = lu->tgt->address_high;
- orb->request.data_descriptor.low = orb->page_table_bus;
- orb->request.misc |=
- COMMAND_ORB_PAGE_TABLE_PRESENT |
- COMMAND_ORB_DATA_SIZE(j);
+ orb->request.data_descriptor.high = cpu_to_be32(lu->tgt->address_high);
+ orb->request.data_descriptor.low = cpu_to_be32(orb->page_table_bus);
+ orb->request.misc |= cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT |
+ COMMAND_ORB_DATA_SIZE(n));
return 0;
fail_page_table:
- dma_unmap_sg(device->card->device, sg, scsi_sg_count(orb->cmd),
- orb->cmd->sc_data_direction);
+ dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
+ scsi_sg_count(orb->cmd), orb->cmd->sc_data_direction);
fail:
return -ENOMEM;
}
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct sbp2_command_orb *orb;
- unsigned int max_payload;
- int retval = SCSI_MLQUEUE_HOST_BUSY;
+ int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
/*
* Bidirectional commands are not yet implemented, and unknown
orb->done = done;
orb->cmd = cmd;
- orb->request.next.high = SBP2_ORB_NULL;
- orb->request.next.low = 0x0;
- /*
- * At speed 100 we can do 512 bytes per packet, at speed 200,
- * 1024 bytes per packet etc. The SBP-2 max_payload field
- * specifies the max payload size as 2 ^ (max_payload + 2), so
- * if we set this to max_speed + 7, we get the right value.
- */
- max_payload = min(device->max_speed + 7,
- device->card->max_receive - 1);
- orb->request.misc =
- COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+ orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
+ orb->request.misc = cpu_to_be32(
+ COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
COMMAND_ORB_SPEED(device->max_speed) |
- COMMAND_ORB_NOTIFY;
+ COMMAND_ORB_NOTIFY);
if (cmd->sc_data_direction == DMA_FROM_DEVICE)
- orb->request.misc |=
- COMMAND_ORB_DIRECTION(SBP2_DIRECTION_FROM_MEDIA);
- else if (cmd->sc_data_direction == DMA_TO_DEVICE)
- orb->request.misc |=
- COMMAND_ORB_DIRECTION(SBP2_DIRECTION_TO_MEDIA);
+ orb->request.misc |= cpu_to_be32(COMMAND_ORB_DIRECTION);
+
+ generation = device->generation;
+ smp_rmb(); /* sbp2_map_scatterlist looks at tgt->address_high */
if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
goto out;
- fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
-
- memset(orb->request.command_block,
- 0, sizeof(orb->request.command_block));
- memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+ memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
orb->base.callback = complete_command_orb;
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+ sbp2_unmap_scatterlist(device->card->device, orb);
goto out;
+ }
- sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, lu->generation,
+ sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
lu->command_block_agent_address + SBP2_ORB_POINTER);
retval = 0;
out:
sdev->allow_restart = 1;
- /*
- * Update the dma alignment (minimum alignment requirements for
- * start and end of DMA transfers) to be a sector
- */
- blk_queue_update_dma_alignment(sdev->request_queue, 511);
+ /* SBP-2 requires quadlet alignment of the data buffers. */
+ blk_queue_update_dma_alignment(sdev->request_queue, 4 - 1);
if (lu->tgt->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
sdev->use_10_for_rw = 1;
+ if (sbp2_param_exclusive_login)
+ sdev->manage_start_stop = 1;
+
if (sdev->type == TYPE_ROM)
sdev->use_10_for_ms = 1;
if (lu->tgt->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
sdev->fix_capacity = 1;
+ if (lu->tgt->workarounds & SBP2_WORKAROUND_POWER_CONDITION)
+ sdev->start_stop_pwr_cond = 1;
+
if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
+ blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE);
+
return 0;
}
* This is the concatenation of target port identifier and logical unit
* identifier as per SAM-2...SAM-4 annex A.
*/
-static ssize_t
-sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct sbp2_logical_unit *lu;
- struct fw_device *device;
if (!sdev)
return 0;
lu = sdev->hostdata;
- device = fw_device(lu->tgt->unit->device.parent);
- return sprintf(buf, "%08x%08x:%06x:%04x\n",
- device->config_rom[3], device->config_rom[4],
+ return sprintf(buf, "%016llx:%06x:%04x\n",
+ (unsigned long long)lu->tgt->guid,
lu->tgt->directory_id, lu->lun);
}