#include <linux/mmzone.h>
#include <linux/edac_mce.h>
#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
#include "edac_core.h"
-/* To use the new pci_[read/write]_config_qword instead of two dword */
-#define USE_QWORD 0
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES 2
+
/*
* Alter this version for the module when modifications are made
#define I7CORE_REVISION " Ver: 1.0.0 " __DATE__
#define EDAC_MOD_STR "i7core_edac"
-/* HACK: temporary, just to enable all logs, for now */
-#undef debugf0
-#define debugf0(fmt, arg...) edac_printk(KERN_INFO, "i7core", fmt, ##arg)
-
/*
* Debug macros
*/
#define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0 0x80
+#define MC_COR_ECC_CNT_1 0x84
+#define MC_COR_ECC_CNT_2 0x88
+#define MC_COR_ECC_CNT_3 0x8c
+#define MC_COR_ECC_CNT_4 0x90
+#define MC_COR_ECC_CNT_5 0x94
+
+#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff)
+
+
/* OFFSETS for Devices 4,5 and 6 Function 0 */
#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
#define REPEAT_EN 0x01
/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
#define MC_DOD_CH_DIMM0 0x48
#define MC_DOD_CH_DIMM1 0x4c
#define MC_DOD_CH_DIMM2 0x50
#define NUM_CHANS 3
#define MAX_DIMMS 3 /* Max DIMMS per channel */
-#define NUM_SOCKETS 2 /* Max number of MC sockets */
#define MAX_MCR_FUNC 4
#define MAX_CHAN_FUNC 3
struct i7core_inject {
int enable;
- u8 socket;
u32 section;
u32 type;
u32 eccmask;
};
struct pci_id_descr {
- int dev;
- int func;
- int dev_id;
- struct pci_dev *pdev[NUM_SOCKETS];
+ int dev;
+ int func;
+ int dev_id;
+};
+
+struct i7core_dev {
+ struct list_head list;
+ u8 socket;
+ struct pci_dev **pdev;
+ struct mem_ctl_info *mci;
};
struct i7core_pvt {
- struct pci_dev *pci_noncore[NUM_SOCKETS];
- struct pci_dev *pci_mcr[NUM_SOCKETS][MAX_MCR_FUNC + 1];
- struct pci_dev *pci_ch[NUM_SOCKETS][NUM_CHANS][MAX_CHAN_FUNC + 1];
+ struct pci_dev *pci_noncore;
+ struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
+ struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+ struct i7core_dev *i7core_dev;
struct i7core_info info;
struct i7core_inject inject;
- struct i7core_channel channel[NUM_SOCKETS][NUM_CHANS];
+ struct i7core_channel channel[NUM_CHANS];
- int sockets; /* Number of sockets */
- int channels; /* Number of active channels */
+ int channels; /* Number of active channels */
- int ce_count_available[NUM_SOCKETS];
- /* ECC corrected errors counts per dimm */
- unsigned long ce_count[NUM_SOCKETS][MAX_DIMMS];
- int last_ce_count[NUM_SOCKETS][MAX_DIMMS];
+ int ce_count_available;
+ int csrow_map[NUM_CHANS][MAX_DIMMS];
+
+ /* ECC corrected errors counts per udimm */
+ unsigned long udimm_ce_count[MAX_DIMMS];
+ int udimm_last_ce_count[MAX_DIMMS];
+ /* ECC corrected errors counts per rdimm */
+ unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+ int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+ unsigned int is_registered;
/* mcelog glue */
struct edac_mce edac_mce;
spinlock_t mce_lock;
};
-/* Device name and register DID (Device ID) */
-struct i7core_dev_info {
- const char *ctl_name; /* name for this device */
- u16 fsb_mapping_errors; /* DID for the branchmap,control */
-};
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
#define PCI_DESCR(device, function, device_id) \
.dev = (device), \
.func = (function), \
.dev_id = (device_id)
-struct pci_id_descr pci_devs[] = {
+struct pci_id_descr pci_dev_descr[] = {
/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
- { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS) }, /* if RDIMM is supported */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS) }, /* if RDIMM */
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
/* Channel 0 */
{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NOCORE) },
};
-#define N_DEVS ARRAY_SIZE(pci_devs)
+#define N_DEVS ARRAY_SIZE(pci_dev_descr)
/*
* pci_device_id table for which devices we are looking for
- * This should match the first device at pci_devs table
*/
static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
{0,} /* 0 terminated list. */
};
-
-/* Table of devices attributes supported by this driver */
-static const struct i7core_dev_info i7core_devs[] = {
- {
- .ctl_name = "i7 Core",
- .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7_MCR,
- },
-};
-
static struct edac_pci_ctl_info *i7core_pci;
/****************************************************************************
#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1))
/* MC_STATUS bits */
-#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 3))
+#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4))
#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch))
/* MC_MAX_DOD read functions */
return cols[col & 0x3];
}
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+ struct i7core_dev *i7core_dev;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ if (i7core_dev->socket == socket)
+ return i7core_dev;
+ }
+
+ return NULL;
+}
/****************************************************************************
Memory check routines
static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
unsigned func)
{
+ struct i7core_dev *i7core_dev = get_i7core_dev(socket);
int i;
+ if (!i7core_dev)
+ return NULL;
+
for (i = 0; i < N_DEVS; i++) {
- if (!pci_devs[i].pdev[socket])
+ if (!i7core_dev->pdev[i])
continue;
- if (PCI_SLOT(pci_devs[i].pdev[socket]->devfn) == slot &&
- PCI_FUNC(pci_devs[i].pdev[socket]->devfn) == func) {
- return pci_devs[i].pdev[socket];
+ if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+ return i7core_dev->pdev[i];
}
}
return NULL;
}
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket: Quick Path Interconnect socket
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
static int i7core_get_active_channels(u8 socket, unsigned *channels,
unsigned *csrows)
{
}
}
- debugf0("Number of active channels on socked %d: %d\n",
+ debugf0("Number of active channels on socket %d: %d\n",
socket, *channels);
return 0;
}
-static int get_dimm_config(struct mem_ctl_info *mci, int *csrow, u8 socket)
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
{
struct i7core_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
struct pci_dev *pdev;
int i, j;
+ u8 socket = pvt->i7core_dev->socket;
unsigned long last_page = 0;
enum edac_type mode;
enum mem_type mtype;
/* Get data from the MC register, function 0 */
- pdev = pvt->pci_mcr[socket][0];
+ pdev = pvt->pci_mcr[0];
if (!pdev)
return -ENODEV;
pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
- debugf0("MC control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
- pvt->info.mc_control, pvt->info.mc_status,
+ debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+ socket, pvt->info.mc_control, pvt->info.mc_status,
pvt->info.max_dod, pvt->info.ch_map);
if (ECC_ENABLED(pvt)) {
}
/* FIXME: need to handle the error codes */
- debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked\n",
+ debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+ "x%x x 0x%x\n",
numdimms(pvt->info.max_dod),
numrank(pvt->info.max_dod >> 2),
- numbank(pvt->info.max_dod >> 4));
- debugf0("DOD Max rows x colums = 0x%x x 0x%x\n",
+ numbank(pvt->info.max_dod >> 4),
numrow(pvt->info.max_dod >> 6),
numcol(pvt->info.max_dod >> 9));
- debugf0("Memory channel configuration:\n");
-
for (i = 0; i < NUM_CHANS; i++) {
u32 data, dimm_dod[3], value[8];
}
/* Devices 4-6 function 0 */
- pci_read_config_dword(pvt->pci_ch[socket][i][0],
+ pci_read_config_dword(pvt->pci_ch[i][0],
MC_CHANNEL_DIMM_INIT_PARAMS, &data);
- pvt->channel[socket][i].ranks = (data & QUAD_RANK_PRESENT) ?
+ pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
4 : 2;
if (data & REGISTERED_DIMM)
#endif
/* Devices 4-6 function 1 */
- pci_read_config_dword(pvt->pci_ch[socket][i][1],
+ pci_read_config_dword(pvt->pci_ch[i][1],
MC_DOD_CH_DIMM0, &dimm_dod[0]);
- pci_read_config_dword(pvt->pci_ch[socket][i][1],
+ pci_read_config_dword(pvt->pci_ch[i][1],
MC_DOD_CH_DIMM1, &dimm_dod[1]);
- pci_read_config_dword(pvt->pci_ch[socket][i][1],
+ pci_read_config_dword(pvt->pci_ch[i][1],
MC_DOD_CH_DIMM2, &dimm_dod[2]);
debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
i,
RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
data,
- pvt->channel[socket][i].ranks,
+ pvt->channel[i].ranks,
(data & REGISTERED_DIMM) ? 'R' : 'U');
for (j = 0; j < 3; j++) {
/* DDR3 has 8 I/O banks */
size = (rows * cols * banks * ranks) >> (20 - 3);
- pvt->channel[socket][i].dimms++;
+ pvt->channel[i].dimms++;
- debugf0("\tdimm %d (0x%08x) %d Mb offset: %x, "
- "numbank: %d,\n\t\t"
- "numrank: %d, numrow: %#x, numcol: %#x\n",
- j, dimm_dod[j], size,
+ debugf0("\tdimm %d %d Mb offset: %x, "
+ "bank: %d, rank: %d, row: %#x, col: %#x\n",
+ j, size,
RANKOFFSET(dimm_dod[j]),
banks, ranks, rows, cols);
csr->channels[0].chan_idx = i;
csr->channels[0].ce_count = 0;
+ pvt->csrow_map[i][j] = *csrow;
+
switch (banks) {
case 4:
csr->dtype = DEV_X4;
pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
- debugf0("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+ debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
for (j = 0; j < 8; j++)
- debugf0("\t\t%#x\t%#x\t%#x\n",
+ debugf1("\t\t%#x\t%#x\t%#x\n",
(value[j] >> 27) & 0x1,
(value[j] >> 24) & 0x7,
(value[j] && ((1 << 24) - 1)));
pvt->inject.enable = 0;
- if (!pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0])
+ if (!pvt->pci_ch[pvt->inject.channel][0])
return -ENODEV;
- pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, 0);
+ pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, 0);
return 0;
}
/*
- * i7core inject inject.socket
- *
- * accept and store error injection inject.socket value
- */
-static ssize_t i7core_inject_socket_store(struct mem_ctl_info *mci,
- const char *data, size_t count)
-{
- struct i7core_pvt *pvt = mci->pvt_info;
- unsigned long value;
- int rc;
-
- rc = strict_strtoul(data, 10, &value);
- if ((rc < 0) || (value > pvt->sockets))
- return 0;
-
- pvt->inject.section = (u32) value;
- return count;
-}
-
-static ssize_t i7core_inject_socket_show(struct mem_ctl_info *mci,
- char *data)
-{
- struct i7core_pvt *pvt = mci->pvt_info;
- return sprintf(data, "%d\n", pvt->inject.socket);
-}
-
-/*
* i7core inject inject.section
*
* accept and store error injection inject.section value
rc = strict_strtoul(data, 10, &value);
if ((rc < 0) || (value > 3))
- return 0;
+ return -EIO;
pvt->inject.section = (u32) value;
return count;
rc = strict_strtoul(data, 10, &value);
if ((rc < 0) || (value > 7))
- return 0;
+ return -EIO;
pvt->inject.type = (u32) value;
return count;
rc = strict_strtoul(data, 10, &value);
if (rc < 0)
- return 0;
+ return -EIO;
pvt->inject.eccmask = (u32) value;
return count;
else
return cmd - data;
} else if (!strcasecmp(cmd, "dimm")) {
- if (value < 4)
+ if (value < 3)
pvt->inject.dimm = value;
else
return cmd - data;
else
return cmd - data;
} else if (!strcasecmp(cmd, "bank")) {
- if (value < 4)
+ if (value < 32)
pvt->inject.bank = value;
else
return cmd - data;
channel, dimm, bank, rank, page, col);
}
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+ u32 read;
+ int count;
+
+ debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val);
+
+ for (count = 0; count < 10; count++) {
+ if (count)
+ msleep(100);
+ pci_write_config_dword(dev, where, val);
+ pci_read_config_dword(dev, where, &read);
+
+ if (read == val)
+ return 0;
+ }
+
+ i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+ "write=%08x. Read=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val, read);
+
+ return -EINVAL;
+}
+
/*
* This routine prepares the Memory Controller for error injection.
* The error will be injected when some process tries to write to the
int rc;
long enable;
- if (!pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0])
+ if (!pvt->pci_ch[pvt->inject.channel][0])
return 0;
rc = strict_strtoul(data, 10, &enable);
if (pvt->inject.dimm < 0)
mask |= 1L << 41;
else {
- if (pvt->channel[pvt->inject.socket][pvt->inject.channel].dimms > 2)
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
mask |= (pvt->inject.dimm & 0x3L) << 35;
else
mask |= (pvt->inject.dimm & 0x1L) << 36;
if (pvt->inject.rank < 0)
mask |= 1L << 40;
else {
- if (pvt->channel[pvt->inject.socket][pvt->inject.channel].dimms > 2)
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
mask |= (pvt->inject.rank & 0x1L) << 34;
else
mask |= (pvt->inject.rank & 0x3L) << 34;
else
mask |= (pvt->inject.col & 0x3fffL);
- /* Unlock writes to registers */
- pci_write_config_dword(pvt->pci_noncore[pvt->inject.socket],
- MC_CFG_CONTROL, 0x2);
- msleep(100);
-
- /* Zeroes error count registers */
- pci_write_config_dword(pvt->pci_mcr[pvt->inject.socket][4],
- MC_TEST_ERR_RCV1, 0);
- pci_write_config_dword(pvt->pci_mcr[pvt->inject.socket][4],
- MC_TEST_ERR_RCV0, 0);
- pvt->ce_count_available[pvt->inject.socket] = 0;
-
-
-#if USE_QWORD
- pci_write_config_qword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, mask);
-#else
- pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, mask);
- pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
-#endif
-
-#if 1
-#if USE_QWORD
- u64 rdmask;
- pci_read_config_qword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, &rdmask);
- debugf0("Inject addr match write 0x%016llx, read: 0x%016llx\n",
- mask, rdmask);
-#else
- u32 rdmask1, rdmask2;
-
- pci_read_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, &rdmask1);
- pci_read_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH + 4, &rdmask2);
-
- debugf0("Inject addr match write 0x%016llx, read: 0x%08x 0x%08x\n",
- mask, rdmask1, rdmask2);
-#endif
-#endif
-
- pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
-
/*
* bit 0: REPEAT_EN
* bits 1-2: MASK_HALF_CACHELINE
(pvt->inject.section & 0x3) << 1 |
(pvt->inject.type & 0x6) << (3 - 1);
- pci_write_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, injectmask);
+ /* Unlock writes to registers - this register is write only */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 0x2);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH, mask);
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, injectmask);
+
+ /*
+ * This is something undocumented, based on my tests
+ * Without writing 8 to this register, errors aren't injected. Not sure
+ * why.
+ */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 8);
-#if 0
- /* lock writes to registers */
- pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, 0);
-#endif
debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
" inject 0x%08x\n",
mask, pvt->inject.eccmask, injectmask);
struct i7core_pvt *pvt = mci->pvt_info;
u32 injectmask;
- pci_read_config_dword(pvt->pci_ch[pvt->inject.socket][pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, &injectmask);
+ pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, &injectmask);
debugf0("Inject error read: 0x%018x\n", injectmask);
unsigned i, count, total = 0;
struct i7core_pvt *pvt = mci->pvt_info;
- for (i = 0; i < pvt->sockets; i++) {
- if (!pvt->ce_count_available[i])
- count = sprintf(data, "socket 0 data unavailable\n");
- else
- count = sprintf(data, "socket %d, dimm0: %lu\n"
- "dimm1: %lu\ndimm2: %lu\n",
- i,
- pvt->ce_count[i][0],
- pvt->ce_count[i][1],
- pvt->ce_count[i][2]);
+ if (!pvt->ce_count_available) {
+ count = sprintf(data, "data unavailable\n");
+ return 0;
+ }
+ if (!pvt->is_registered) {
+ count = sprintf(data, "all channels "
+ "UDIMM0: %lu UDIMM1: %lu UDIMM2: %lu\n",
+ pvt->udimm_ce_count[0],
+ pvt->udimm_ce_count[1],
+ pvt->udimm_ce_count[2]);
data += count;
total += count;
+ } else {
+ for (i = 0; i < NUM_CHANS; i++) {
+ count = sprintf(data, "channel %d RDIMM0: %lu "
+ "RDIMM1: %lu RDIMM2: %lu\n",
+ i,
+ pvt->rdimm_ce_count[i][0],
+ pvt->rdimm_ce_count[i][1],
+ pvt->rdimm_ce_count[i][2]);
+ data += count;
+ total += count;
+ }
}
return total;
static struct mcidev_sysfs_attribute i7core_inj_attrs[] = {
{
.attr = {
- .name = "inject_socket",
- .mode = (S_IRUGO | S_IWUSR)
- },
- .show = i7core_inject_socket_show,
- .store = i7core_inject_socket_store,
- }, {
- .attr = {
.name = "inject_section",
.mode = (S_IRUGO | S_IWUSR)
},
.show = i7core_ce_regs_show,
.store = NULL,
},
+ { .attr = { .name = NULL } }
};
/****************************************************************************
* i7core_put_devices 'put' all the devices that we have
* reserved via 'get'
*/
-static void i7core_put_devices(void)
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
{
- int i, j;
+ int i;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < N_DEVS; i++) {
+ struct pci_dev *pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+ kfree(i7core_dev->pdev);
+ list_del(&i7core_dev->list);
+ kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+ struct i7core_dev *i7core_dev, *tmp;
- for (i = 0; i < NUM_SOCKETS; i++)
- for (j = 0; j < N_DEVS; j++)
- pci_dev_put(pci_devs[j].pdev[i]);
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+ i7core_put_devices(i7core_dev);
+}
+
+static void i7core_xeon_pci_fixup(void)
+{
+ struct pci_dev *pdev = NULL;
+ int i;
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+ * aren't announced by acpi. So, we need to use a legacy scan probing
+ * to detect them
+ */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ pci_dev_descr[0].dev_id, NULL);
+ if (unlikely(!pdev)) {
+ for (i = 0; i < MAX_SOCKET_BUSES; i++)
+ pcibios_scan_specific_bus(255-i);
+ }
}
/*
*
* Need to 'get' device 16 func 1 and func 2
*/
-static int i7core_get_devices(void)
+int i7core_get_onedevice(struct pci_dev **prev, int devno)
{
- int rc, i;
+ struct i7core_dev *i7core_dev;
+
struct pci_dev *pdev = NULL;
u8 bus = 0;
u8 socket = 0;
- for (i = 0; i < N_DEVS; i++) {
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- pci_devs[i].dev_id, NULL);
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ pci_dev_descr[devno].dev_id, *prev);
- if (!pdev && !i) {
- pcibios_scan_specific_bus(254);
- pcibios_scan_specific_bus(255);
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (pci_dev_descr[devno].dev_id == PCI_DEVICE_ID_INTEL_I7_NOCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_I7_NOCORE_ALT, *prev);
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- pci_devs[i].dev_id, NULL);
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
}
/*
- * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
- * is at addr 8086:2c40, instead of 8086:2c41. So, we need
- * to probe for the alternate address in case of failure
+ * Dev 3 function 2 only exists on chips with RDIMMs
+ * so, it is ok to not found it
*/
- if (pci_devs[i].dev_id == PCI_DEVICE_ID_INTEL_I7_NOCORE
- && !pdev)
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_I7_NOCORE_ALT, NULL);
+ if ((pci_dev_descr[devno].dev == 3) && (pci_dev_descr[devno].func == 2)) {
+ *prev = pdev;
+ return 0;
+ }
- if (likely(pdev)) {
- bus = pdev->bus->number;
+ i7core_printk(KERN_ERR,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ pci_dev_descr[devno].dev, pci_dev_descr[devno].func,
+ PCI_VENDOR_ID_INTEL, pci_dev_descr[devno].dev_id);
- if (bus == 0x3f)
- socket = 0;
- else
- socket = 255 - bus;
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
- if (socket >= NUM_SOCKETS) {
- i7core_printk(KERN_ERR,
- "Found unexpected socket for "
- "dev %02x:%02x.%d PCI ID %04x:%04x\n",
- bus, pci_devs[i].dev, pci_devs[i].func,
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
+ if (bus == 0x3f)
+ socket = 0;
+ else
+ socket = 255 - bus;
+
+ i7core_dev = get_i7core_dev(socket);
+ if (!i7core_dev) {
+ i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+ if (!i7core_dev)
+ return -ENOMEM;
+ i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * N_DEVS,
+ GFP_KERNEL);
+ if (!i7core_dev->pdev)
+ return -ENOMEM;
+ i7core_dev->socket = socket;
+ list_add_tail(&i7core_dev->list, &i7core_edac_list);
+ }
- rc = -ENODEV;
- goto error;
- }
+ if (i7core_dev->pdev[devno]) {
+ i7core_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, pci_dev_descr[devno].dev, pci_dev_descr[devno].func,
+ PCI_VENDOR_ID_INTEL, pci_dev_descr[devno].dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
- pci_devs[i].pdev[socket] = pdev;
- } else {
- i7core_printk(KERN_ERR,
- "Device not found: "
- "dev %02x:%02x.%d PCI ID %04x:%04x\n",
- bus, pci_devs[i].dev, pci_devs[i].func,
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
+ i7core_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != pci_dev_descr[devno].dev ||
+ PCI_FUNC(pdev->devfn) != pci_dev_descr[devno].func)) {
+ i7core_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, pci_dev_descr[devno].dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, pci_dev_descr[devno].dev, pci_dev_descr[devno].func);
+ return -ENODEV;
+ }
- /* Dev 3 function 2 only exists on chips with RDIMMs */
- if ((pci_devs[i].dev == 3) && (pci_devs[i].func == 2))
- continue;
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ i7core_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, pci_dev_descr[devno].dev, pci_dev_descr[devno].func,
+ PCI_VENDOR_ID_INTEL, pci_dev_descr[devno].dev_id);
+ return -ENODEV;
+ }
- /* End of list, leave */
- rc = -ENODEV;
- goto error;
- }
+ debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ socket, bus, pci_dev_descr[devno].dev,
+ pci_dev_descr[devno].func,
+ PCI_VENDOR_ID_INTEL, pci_dev_descr[devno].dev_id);
- /* Sanity check */
- if (unlikely(PCI_SLOT(pdev->devfn) != pci_devs[i].dev ||
- PCI_FUNC(pdev->devfn) != pci_devs[i].func)) {
- i7core_printk(KERN_ERR,
- "Device PCI ID %04x:%04x "
- "has fn %d.%d instead of fn %d.%d\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pci_devs[i].dev, pci_devs[i].func);
- rc = -EINVAL;
- goto error;
- }
+ *prev = pdev;
- /* Be sure that the device is enabled */
- rc = pci_enable_device(pdev);
- if (unlikely(rc < 0)) {
- i7core_printk(KERN_ERR,
- "Couldn't enable PCI ID %04x:%04x "
- "fn %d.%d\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
- goto error;
- }
+ return 0;
+}
+
+static int i7core_get_devices(void)
+{
+ int i;
+ struct pci_dev *pdev = NULL;
- i7core_printk(KERN_INFO,
- "Registered socket %d "
- "dev %02x:%02x.%d PCI ID %04x:%04x\n",
- socket, bus, pci_devs[i].dev, pci_devs[i].func,
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
+ for (i = 0; i < N_DEVS; i++) {
+ pdev = NULL;
+ do {
+ if (i7core_get_onedevice(&pdev, i) < 0) {
+ i7core_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
}
return 0;
-
-error:
- i7core_put_devices();
- return -EINVAL;
}
-static int mci_bind_devs(struct mem_ctl_info *mci)
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct i7core_dev *i7core_dev)
{
struct i7core_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
- int i, j, func, slot;
+ int i, func, slot;
- for (i = 0; i < pvt->sockets; i++) {
- for (j = 0; j < N_DEVS; j++) {
- pdev = pci_devs[j].pdev[i];
- if (!pdev)
- continue;
+ /* Associates i7core_dev and mci for future usage */
+ pvt->i7core_dev = i7core_dev;
+ i7core_dev->mci = mci;
- func = PCI_FUNC(pdev->devfn);
- slot = PCI_SLOT(pdev->devfn);
- if (slot == 3) {
- if (unlikely(func > MAX_MCR_FUNC))
- goto error;
- pvt->pci_mcr[i][func] = pdev;
- } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
- if (unlikely(func > MAX_CHAN_FUNC))
- goto error;
- pvt->pci_ch[i][slot - 4][func] = pdev;
- } else if (!slot && !func)
- pvt->pci_noncore[i] = pdev;
- else
+ pvt->is_registered = 0;
+ for (i = 0; i < N_DEVS; i++) {
+ pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+
+ func = PCI_FUNC(pdev->devfn);
+ slot = PCI_SLOT(pdev->devfn);
+ if (slot == 3) {
+ if (unlikely(func > MAX_MCR_FUNC))
+ goto error;
+ pvt->pci_mcr[func] = pdev;
+ } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+ if (unlikely(func > MAX_CHAN_FUNC))
goto error;
+ pvt->pci_ch[slot - 4][func] = pdev;
+ } else if (!slot && !func)
+ pvt->pci_noncore = pdev;
+ else
+ goto error;
- debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pdev, i);
- }
+ debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev, i7core_dev->socket);
+
+ if (PCI_SLOT(pdev->devfn) == 3 &&
+ PCI_FUNC(pdev->devfn) == 2)
+ pvt->is_registered = 1;
}
return 0;
/****************************************************************************
Error check routines
****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+ int chan, int dimm, int add)
+{
+ char *msg;
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int row = pvt->csrow_map[chan][dimm], i;
+
+ for (i = 0; i < add; i++) {
+ msg = kasprintf(GFP_KERNEL, "Corrected error "
+ "(Socket=%d channel=%d dimm=%d)",
+ pvt->i7core_dev->socket, chan, dimm);
+
+ edac_mc_handle_fbd_ce(mci, row, 0, msg);
+ kfree (msg);
+ }
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+ int chan, int new0, int new1, int new2)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int add0 = 0, add1 = 0, add2 = 0;
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+
+ add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+ add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+ add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->rdimm_ce_count[chan][2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->rdimm_ce_count[chan][1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->rdimm_ce_count[chan][0] += add0;
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->rdimm_last_ce_count[chan][2] = new2;
+ pvt->rdimm_last_ce_count[chan][1] = new1;
+ pvt->rdimm_last_ce_count[chan][0] = new0;
+
+ /*updated the edac core */
+ if (add0 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 0, add0);
+ if (add1 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 1, add1);
+ if (add2 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv[3][2];
+ int i, new0, new1, new2;
+
+ /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+ &rcv[0][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+ &rcv[0][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+ &rcv[1][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+ &rcv[1][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+ &rcv[2][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+ &rcv[2][1]);
+ for (i = 0 ; i < 3; i++) {
+ debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+ (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+ /*if the channel has 3 dimms*/
+ if (pvt->channel[i].dimms > 2) {
+ new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+ new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+ } else {
+ new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+ DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+ DIMM_BOT_COR_ERR(rcv[i][1]);
+ new2 = 0;
+ }
+
+ i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+ }
+}
/* This function is based on the device 3 function 4 registers as described on:
* Intel Xeon Processor 5500 Series Datasheet Volume 2
* also available at:
* http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
*/
-static void check_mc_test_err(struct mem_ctl_info *mci, u8 socket)
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
{
struct i7core_pvt *pvt = mci->pvt_info;
u32 rcv1, rcv0;
int new0, new1, new2;
- if (!pvt->pci_mcr[socket][4]) {
- debugf0("%s MCR registers not found\n",__func__);
+ if (!pvt->pci_mcr[4]) {
+ debugf0("%s MCR registers not found\n", __func__);
return;
}
- /* Corrected error reads */
- pci_read_config_dword(pvt->pci_mcr[socket][4], MC_TEST_ERR_RCV1, &rcv1);
- pci_read_config_dword(pvt->pci_mcr[socket][4], MC_TEST_ERR_RCV0, &rcv0);
+ /* Corrected test errors */
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
/* Store the new values */
new2 = DIMM2_COR_ERR(rcv1);
new1 = DIMM1_COR_ERR(rcv0);
new0 = DIMM0_COR_ERR(rcv0);
-#if 0
- debugf2("%s CE rcv1=0x%08x rcv0=0x%08x, %d %d %d\n",
- (pvt->ce_count_available ? "UPDATE" : "READ"),
- rcv1, rcv0, new0, new1, new2);
-#endif
-
/* Updates CE counters if it is not the first time here */
- if (pvt->ce_count_available[socket]) {
+ if (pvt->ce_count_available) {
/* Updates CE counters */
int add0, add1, add2;
- add2 = new2 - pvt->last_ce_count[socket][2];
- add1 = new1 - pvt->last_ce_count[socket][1];
- add0 = new0 - pvt->last_ce_count[socket][0];
+ add2 = new2 - pvt->udimm_last_ce_count[2];
+ add1 = new1 - pvt->udimm_last_ce_count[1];
+ add0 = new0 - pvt->udimm_last_ce_count[0];
if (add2 < 0)
add2 += 0x7fff;
- pvt->ce_count[socket][2] += add2;
+ pvt->udimm_ce_count[2] += add2;
if (add1 < 0)
add1 += 0x7fff;
- pvt->ce_count[socket][1] += add1;
+ pvt->udimm_ce_count[1] += add1;
if (add0 < 0)
add0 += 0x7fff;
- pvt->ce_count[socket][0] += add0;
+ pvt->udimm_ce_count[0] += add0;
+
+ if (add0 | add1 | add2)
+ i7core_printk(KERN_ERR, "New Corrected error(s): "
+ "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+ add0, add1, add2);
} else
- pvt->ce_count_available[socket] = 1;
+ pvt->ce_count_available = 1;
/* Store the new values */
- pvt->last_ce_count[socket][2] = new2;
- pvt->last_ce_count[socket][1] = new1;
- pvt->last_ce_count[socket][0] = new0;
+ pvt->udimm_last_ce_count[2] = new2;
+ pvt->udimm_last_ce_count[1] = new1;
+ pvt->udimm_last_ce_count[0] = new0;
}
/*
static void i7core_mce_output_error(struct mem_ctl_info *mci,
struct mce *m)
{
- char *type="NON-FATAL";
- char *err, *msg;
+ struct i7core_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *err, *msg;
unsigned long error = m->status & 0x1ff0000l;
+ u32 optypenum = (m->status >> 4) & 0x07;
u32 core_err_cnt = (m->status >> 38) && 0x7fff;
u32 dimm = (m->misc >> 16) & 0x3;
u32 channel = (m->misc >> 18) & 0x3;
u32 syndrome = m->misc >> 32;
u32 errnum = find_first_bit(&error, 32);
+ int csrow;
+
+ if (m->mcgstatus & 1)
+ type = "FATAL";
+ else
+ type = "NON_FATAL";
+
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "read error";
+ break;
+ case 2:
+ optype = "write error";
+ break;
+ case 3:
+ optype = "addr/cmd error";
+ break;
+ case 4:
+ optype = "scrubbing error";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
switch (errnum) {
case 16:
/* FIXME: should convert addr into bank and rank information */
msg = kasprintf(GFP_ATOMIC,
- "%s (addr = 0x%08llx Dimm=%d, Channel=%d, "
- "syndrome=0x%08x, count=%d Err=%d (%s))\n",
- type, (long long) m->addr, dimm, channel,
- syndrome, core_err_cnt,errnum, err);
+ "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+ "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+ type, (long long) m->addr, m->cpu, dimm, channel,
+ syndrome, core_err_cnt, (long long)m->status,
+ (long long)m->misc, optype, err);
debugf0("%s", msg);
+ csrow = pvt->csrow_map[channel][dimm];
+
/* Call the helper to output message */
- edac_mc_handle_fbd_ue(mci, 0 /* FIXME: should be rank here */,
- 0, 0 /* FIXME: should be channel here */, msg);
+ if (m->mcgstatus & 1)
+ edac_mc_handle_fbd_ue(mci, csrow, 0,
+ 0 /* FIXME: should be channel here */, msg);
+ else if (!pvt->is_registered)
+ edac_mc_handle_fbd_ce(mci, csrow,
+ 0 /* FIXME: should be channel here */, msg);
kfree(msg);
}
struct mce *m = NULL;
unsigned long flags;
- debugf0(__FILE__ ": %s()\n", __func__);
-
/* Copy all mce errors into a temporary buffer */
spin_lock_irqsave(&pvt->mce_lock, flags);
if (pvt->mce_count) {
m = kmalloc(sizeof(*m) * pvt->mce_count, GFP_ATOMIC);
+
if (m) {
count = pvt->mce_count;
memcpy(m, &pvt->mce_entry, sizeof(*m) * count);
}
pvt->mce_count = 0;
}
+
spin_unlock_irqrestore(&pvt->mce_lock, flags);
/* proccess mcelog errors */
kfree(m);
/* check memory count errors */
- for (i = 0; i < pvt->sockets; i++)
- check_mc_test_err(mci, i);
+ if (!pvt->is_registered)
+ i7core_udimm_check_mc_ecc_err(mci);
+ else
+ i7core_rdimm_check_mc_ecc_err(mci);
}
/*
*/
static int i7core_mce_check_error(void *priv, struct mce *mce)
{
- struct i7core_pvt *pvt = priv;
+ struct mem_ctl_info *mci = priv;
+ struct i7core_pvt *pvt = mci->pvt_info;
unsigned long flags;
- debugf0(__FILE__ ": %s()\n", __func__);
-
/*
* Just let mcelog handle it if the error is
* outside the memory controller
if (mce->bank != 8)
return 0;
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket) {
+ debugf0("mc%d: ignoring mce log for socket %d. "
+ "Another mc should get it.\n",
+ pvt->i7core_dev->socket,
+ cpu_data(mce->cpu).phys_proc_id);
+ return 0;
+ }
+
spin_lock_irqsave(&pvt->mce_lock, flags);
if (pvt->mce_count < MCE_LOG_LEN) {
memcpy(&pvt->mce_entry[pvt->mce_count], mce, sizeof(*mce));
}
spin_unlock_irqrestore(&pvt->mce_lock, flags);
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ i7core_check_error(mci);
+
/* Advice mcelog that the error were handled */
return 1;
}
-/*
- * i7core_probe Probe for ONE instance of device to see if it is
- * present.
- * return:
- * 0 for FOUND a device
- * < 0 for error code
- */
-static int __devinit i7core_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+ int num_channels, int num_csrows)
{
struct mem_ctl_info *mci;
struct i7core_pvt *pvt;
- int num_channels = 0;
- int num_csrows = 0;
int csrow = 0;
- int dev_idx = id->driver_data;
- int rc, i;
- u8 sockets;
-
- if (unlikely(dev_idx >= ARRAY_SIZE(i7core_devs)))
- return -EINVAL;
-
- /* get the pci devices we want to reserve for our use */
- rc = i7core_get_devices();
- if (unlikely(rc < 0))
- return rc;
-
- sockets = 1;
- for (i = NUM_SOCKETS - 1; i > 0; i--)
- if (pci_devs[0].pdev[i]) {
- sockets = i + 1;
- break;
- }
-
- for (i = 0; i < sockets; i++) {
- int channels;
- int csrows;
-
- /* Check the number of active and not disabled channels */
- rc = i7core_get_active_channels(i, &channels, &csrows);
- if (unlikely(rc < 0))
- goto fail0;
-
- num_channels += channels;
- num_csrows += csrows;
- }
+ int rc;
/* allocate a new MC control structure */
- mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
- if (unlikely(!mci)) {
- rc = -ENOMEM;
- goto fail0;
- }
+ mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+ i7core_dev->socket);
+ if (unlikely(!mci))
+ return -ENOMEM;
debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
- mci->dev = &pdev->dev; /* record ptr to the generic device */
+ /* record ptr to the generic device */
+ mci->dev = &i7core_dev->pdev[0]->dev;
+
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
- pvt->sockets = sockets;
- mci->mc_idx = 0;
/*
* FIXME: how to handle RDDR3 at MCI level? It is possible to have
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = "i7core_edac.c";
mci->mod_ver = I7CORE_REVISION;
- mci->ctl_name = i7core_devs[dev_idx].ctl_name;
- mci->dev_name = pci_name(pdev);
+ mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+ i7core_dev->socket);
+ mci->dev_name = pci_name(i7core_dev->pdev[0]);
mci->ctl_page_to_phys = NULL;
mci->mc_driver_sysfs_attributes = i7core_inj_attrs;
/* Set the function pointer to an actual operation function */
mci->edac_check = i7core_check_error;
/* Store pci devices at mci for faster access */
- rc = mci_bind_devs(mci);
+ rc = mci_bind_devs(mci, i7core_dev);
if (unlikely(rc < 0))
- goto fail1;
+ goto fail;
/* Get dimm basic config */
- for (i = 0; i < sockets; i++)
- get_dimm_config(mci, &csrow, i);
+ get_dimm_config(mci, &csrow);
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
*/
rc = -EINVAL;
- goto fail1;
+ goto fail;
}
/* allocating generic PCI control info */
- i7core_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+ i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+ EDAC_MOD_STR);
if (unlikely(!i7core_pci)) {
printk(KERN_WARNING
"%s(): Unable to create PCI control\n",
pvt->inject.col = -1;
/* Registers on edac_mce in order to receive memory errors */
- pvt->edac_mce.priv = pvt;
+ pvt->edac_mce.priv = mci;
pvt->edac_mce.check_error = i7core_mce_check_error;
spin_lock_init(&pvt->mce_lock);
rc = edac_mce_register(&pvt->edac_mce);
- if (unlikely (rc < 0)) {
+ if (unlikely(rc < 0)) {
debugf0("MC: " __FILE__
": %s(): failed edac_mce_register()\n", __func__);
- goto fail1;
+ }
+
+fail:
+ edac_mc_free(mci);
+ return rc;
+}
+
+/*
+ * i7core_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+static int __devinit i7core_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int dev_idx = id->driver_data;
+ int rc;
+ struct i7core_dev *i7core_dev;
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(dev_idx >= 1))
+ return -EINVAL;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&i7core_edac_lock);
+ rc = i7core_get_devices();
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ int channels;
+ int csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = i7core_get_active_channels(i7core_dev->socket,
+ &channels, &csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+
+ rc = i7core_register_mci(i7core_dev, channels, csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
}
i7core_printk(KERN_INFO, "Driver loaded.\n");
+ mutex_unlock(&i7core_edac_lock);
return 0;
fail1:
- edac_mc_free(mci);
-
+ i7core_put_all_devices();
fail0:
- i7core_put_devices();
+ mutex_unlock(&i7core_edac_lock);
return rc;
}
static void __devexit i7core_remove(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
- struct i7core_pvt *pvt;
+ struct i7core_dev *i7core_dev, *tmp;
debugf0(__FILE__ ": %s()\n", __func__);
if (i7core_pci)
edac_pci_release_generic_ctl(i7core_pci);
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
- mci = edac_mc_del_mc(&pdev->dev);
- if (!mci)
- return;
-
- /* Unregisters on edac_mce in order to receive memory errors */
- pvt = mci->pvt_info;
- edac_mce_unregister(&pvt->edac_mce);
-
- /* retrieve references to resources, and free those resources */
- i7core_put_devices();
-
- edac_mc_free(mci);
+ mutex_lock(&i7core_edac_lock);
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+ mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+ if (mci) {
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ i7core_dev = pvt->i7core_dev;
+ edac_mce_unregister(&pvt->edac_mce);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ i7core_put_devices(i7core_dev);
+ } else {
+ i7core_printk(KERN_ERR,
+ "Couldn't find mci for socket %d\n",
+ i7core_dev->socket);
+ }
+ }
+ mutex_unlock(&i7core_edac_lock);
}
MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
+ i7core_xeon_pci_fixup();
+
pci_rc = pci_register_driver(&i7core_driver);
- return (pci_rc < 0) ? pci_rc : 0;
+ if (pci_rc >= 0)
+ return 0;
+
+ i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
}
/*