/* Map from a CSROW entry to the mask entry that operates on it */
static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
{
- return csrow >> (pvt->num_dcsm >> 3);
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+ return csrow;
+ else
+ return csrow >> 1;
}
/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
* base/mask register pair, test the condition shown near the start of
* section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
*/
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
/* This DRAM chip select is disabled on this node */
if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
u64 base, mask;
pvt = mci->pvt_info;
- BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+ BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
base = base_from_dct_base(pvt, csrow);
mask = mask_from_dct_mask(pvt, csrow);
*/
static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
{
- if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+ pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
+ pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
+ pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
+ pvt->dcs_shift = REV_E_DCS_SHIFT;
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 8;
+ } else {
pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS;
pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS;
pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS;
pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT;
- switch (boot_cpu_data.x86) {
- case 0xf:
- pvt->num_dcsm = REV_F_DCSM_COUNT;
- break;
-
- case 0x10:
- pvt->num_dcsm = F10_DCSM_COUNT;
- break;
-
- case 0x11:
- pvt->num_dcsm = F11_DCSM_COUNT;
- break;
-
- default:
- amd64_printk(KERN_ERR, "Unsupported family!\n");
- break;
+ if (boot_cpu_data.x86 == 0x11) {
+ pvt->cs_count = 4;
+ pvt->num_dcsm = 2;
+ } else {
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 4;
}
- } else {
- pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
- pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
- pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
- pvt->dcs_shift = REV_E_DCS_SHIFT;
- pvt->num_dcsm = REV_E_DCSM_COUNT;
}
}
amd64_set_dct_base_and_mask(pvt);
- for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+ for (cs = 0; cs < pvt->cs_count; cs++) {
reg = K8_DCSB0 + (cs * 4);
err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
&pvt->dcsb0[cs]);
debugf0("Reading K8_DRAM_BASE_LOW failed\n");
/* Extract parts into separate data entries */
- pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 24;
+ pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
pvt->dram_rw_en[dram] = (low & 0x3);
* Extract parts into separate data entries. Limit is the HIGHEST memory
* location of the region, so lower 24 bits need to be all ones
*/
- pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 24) | 0x00FFFFFF;
+ pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
pvt->dram_DstNode[dram] = (low & 0x7);
}
* different from the node that detected the error.
*/
src_mci = find_mc_by_sys_addr(mci, SystemAddress);
- if (src_mci) {
+ if (!src_mci) {
amd64_mc_printk(mci, KERN_ERR,
"failed to map error address 0x%lx to a node\n",
(unsigned long)SystemAddress);
pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
- pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
- ((u64) low_base & 0xFFFF0000))) << 8;
+ pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
+ (((u64)low_base & 0xFFFF0000) << 8);
low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
* Extract address values and form a LIMIT address. Limit is the HIGHEST
* memory location of the region, so low 24 bits need to be all ones.
*/
- low_limit |= 0x0000FFFF;
- pvt->dram_limit[dram] =
- ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+ pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
+ (((u64) low_limit & 0xFFFF0000) << 8) |
+ 0x00FFFFFF;
}
static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs);
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
cs_base = amd64_get_dct_base(pvt, cs, csrow);
if (!(cs_base & K8_DCSB_CS_ENABLE))
{
u32 ec = ERROR_CODE(info->nbsl);
u32 xec = EXT_ERROR_CODE(info->nbsl);
- int ecc_type = info->nbsh & (0x3 << 13);
+ int ecc_type = (info->nbsh >> 13) & 0x3;
/* Bail early out if this was an 'observed' error */
if (PP(ec) == K8_NBSL_PP_OBS)
* NOTE: CPU Revision Dependent code
*
* Input:
- * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
* k8 private pointer to -->
* DRAM Bank Address mapping register
* node_id
(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
);
- for (i = 0; i < CHIPSELECT_COUNT; i++) {
+ for (i = 0; i < pvt->cs_count; i++) {
csrow = &mci->csrows[i];
if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
goto err_exit;
ret = -ENOMEM;
- mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+ mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
if (!mci)
goto err_exit;
opstate_init();
if (cache_k8_northbridges() < 0)
- goto err_exit;
+ return err;
err = pci_register_driver(&amd64_pci_driver);
if (err)
err_2nd_stage:
debugf0("2nd stage failed\n");
-
-err_exit:
pci_unregister_driver(&amd64_pci_driver);
return err;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff