* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
* The support for MPC8349 DMA contorller is also added.
*
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/dmapool.h>
#include <linux/of_platform.h>
+#include <asm/fsldma.h>
#include "fsldma.h"
static void dma_init(struct fsl_dma_chan *fsl_chan)
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
* EOTIE - End-of-transfer interrupt enable
+ * PRC_RM - PCI read multiple
*/
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
- 32);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+ | FSL_DMA_MR_PRC_RM, 32);
break;
}
return DMA_IN(fsl_chan, &fsl_chan->reg_base->ndar, 64);
}
+static u32 get_bcr(struct fsl_dma_chan *fsl_chan)
+{
+ return DMA_IN(fsl_chan, &fsl_chan->reg_base->bcr, 32);
+}
+
static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
{
u32 sr = get_sr(fsl_chan);
static void dma_start(struct fsl_dma_chan *fsl_chan)
{
- u32 mr_set = 0;;
+ u32 mr_set = 0;
if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
mr_set |= FSL_DMA_MR_EMP_EN;
- } else
+ } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
& ~FSL_DMA_MR_EMP_EN, 32);
+ }
if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
mr_set |= FSL_DMA_MR_EMS_EN;
static void dma_halt(struct fsl_dma_chan *fsl_chan)
{
- int i = 0;
+ int i;
+
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
32);
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
- while (!dma_is_idle(fsl_chan) && (i++ < 100))
+ for (i = 0; i < 100; i++) {
+ if (dma_is_idle(fsl_chan))
+ break;
udelay(10);
+ }
if (i >= 100 && !dma_is_idle(fsl_chan))
dev_err(fsl_chan->dev, "DMA halt timeout!\n");
}
static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
struct fsl_desc_sw *desc)
{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+
desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
- DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
- 64);
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+ | snoop_bits, 64);
}
static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
}
/**
- * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * fsl_chan_set_request_count - Set DMA Request Count for external control
* @fsl_chan : Freescale DMA channel
- * @size : Pause control size, 0 for disable external pause control.
- * The maximum is 1024.
+ * @size : Number of bytes to transfer in a single request
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA request count is how many bytes are allowed to transfer before
+ * pausing the channel, after which a new assertion of DREQ# resumes channel
+ * operation.
*
- * The Freescale DMA channel can be controlled by the external
- * signal DREQ#. The pause control size is how many bytes are allowed
- * to transfer before pausing the channel, after which a new assertion
- * of DREQ# resumes channel operation.
+ * A size of 0 disables external pause control. The maximum size is 1024.
*/
-static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size)
+static void fsl_chan_set_request_count(struct fsl_dma_chan *fsl_chan, int size)
{
- if (size > 1024)
- return;
+ BUG_ON(size > 1024);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ | ((__ilog2(size) << 24) & 0x0f000000),
+ 32);
+}
- if (size) {
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
- DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
- | ((__ilog2(size) << 24) & 0x0f000000),
- 32);
+/**
+ * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * @fsl_chan : Freescale DMA channel
+ * @enable : 0 is disabled, 1 is enabled.
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA Request Count feature should be used in addition to this feature
+ * to set the number of bytes to transfer before pausing the channel.
+ */
+static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int enable)
+{
+ if (enable)
fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT;
- } else
+ else
fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT;
}
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
+ struct fsl_desc_sw *child;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- desc->async_tx.cookie = cookie;
- fsl_chan->common.cookie = desc->async_tx.cookie;
+ list_for_each_entry(child, &desc->tx_list, node) {
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+
+ desc->async_tx.cookie = cookie;
+ }
+ fsl_chan->common.cookie = cookie;
append_ld_queue(fsl_chan, desc);
- list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+ list_splice_init(&desc->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc);
if (desc_sw) {
memset(desc_sw, 0, sizeof(struct fsl_desc_sw));
+ INIT_LIST_HEAD(&desc_sw->tx_list);
dma_async_tx_descriptor_init(&desc_sw->async_tx,
&fsl_chan->common);
desc_sw->async_tx.tx_submit = fsl_dma_tx_submit;
- INIT_LIST_HEAD(&desc_sw->async_tx.tx_list);
desc_sw->async_tx.phys = pdesc;
}
static int fsl_dma_alloc_chan_resources(struct dma_chan *chan)
{
struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
- LIST_HEAD(tmp_list);
+
+ /* Has this channel already been allocated? */
+ if (fsl_chan->desc_pool)
+ return 1;
/* We need the descriptor to be aligned to 32bytes
* for meeting FSL DMA specification requirement.
}
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
dma_pool_destroy(fsl_chan->desc_pool);
+
+ fsl_chan->desc_pool = NULL;
}
static struct dma_async_tx_descriptor *
-fsl_dma_prep_interrupt(struct dma_chan *chan)
+fsl_dma_prep_interrupt(struct dma_chan *chan, unsigned long flags)
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *new;
}
new->async_tx.cookie = -EBUSY;
- new->async_tx.ack = 0;
+ new->async_tx.flags = flags;
+
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &new->tx_list);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ struct list_head *list;
size_t copy;
- LIST_HEAD(link_chain);
if (!chan)
return NULL;
if (!new) {
dev_err(fsl_chan->dev,
"No free memory for link descriptor\n");
- return NULL;
+ goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys);
new->async_tx.cookie = 0;
- new->async_tx.ack = 1;
+ async_tx_ack(&new->async_tx);
prev = new;
len -= copy;
dma_dest += copy;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &first->async_tx.tx_list);
+ list_add_tail(&new->node, &first->tx_list);
} while (len);
- new->async_tx.ack = 0; /* client is in control of this ack */
+ new->async_tx.flags = flags; /* client is in control of this ack */
new->async_tx.cookie = -EBUSY;
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
- return first ? &first->async_tx : NULL;
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ list = &first->tx_list;
+ list_for_each_entry_safe_reverse(new, prev, list, node) {
+ list_del(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
+}
+
+/**
+ * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: DMAEngine flags
+ *
+ * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the
+ * DMA_SLAVE API, this gets the device-specific information from the
+ * chan->private variable.
+ */
+static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
+ struct fsl_dma_slave *slave;
+ struct list_head *tx_list;
+ size_t copy;
+
+ int i;
+ struct scatterlist *sg;
+ size_t sg_used;
+ size_t hw_used;
+ struct fsl_dma_hw_addr *hw;
+ dma_addr_t dma_dst, dma_src;
+
+ if (!chan)
+ return NULL;
+
+ if (!chan->private)
+ return NULL;
+
+ fsl_chan = to_fsl_chan(chan);
+ slave = chan->private;
+
+ if (list_empty(&slave->addresses))
+ return NULL;
+
+ hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+
+ /*
+ * Build the hardware transaction to copy from the scatterlist to
+ * the hardware, or from the hardware to the scatterlist
+ *
+ * If you are copying from the hardware to the scatterlist and it
+ * takes two hardware entries to fill an entire page, then both
+ * hardware entries will be coalesced into the same page
+ *
+ * If you are copying from the scatterlist to the hardware and a
+ * single page can fill two hardware entries, then the data will
+ * be read out of the page into the first hardware entry, and so on
+ */
+ for_each_sg(sgl, sg, sg_len, i) {
+ sg_used = 0;
+
+ /* Loop until the entire scatterlist entry is used */
+ while (sg_used < sg_dma_len(sg)) {
+
+ /*
+ * If we've used up the current hardware address/length
+ * pair, we need to load a new one
+ *
+ * This is done in a while loop so that descriptors with
+ * length == 0 will be skipped
+ */
+ while (hw_used >= hw->length) {
+
+ /*
+ * If the current hardware entry is the last
+ * entry in the list, we're finished
+ */
+ if (list_is_last(&hw->entry, &slave->addresses))
+ goto finished;
+
+ /* Get the next hardware address/length pair */
+ hw = list_entry(hw->entry.next,
+ struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+ }
+
+ /* Allocate the link descriptor from DMA pool */
+ new = fsl_dma_alloc_descriptor(fsl_chan);
+ if (!new) {
+ dev_err(fsl_chan->dev, "No free memory for "
+ "link descriptor\n");
+ goto fail;
+ }
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+ /*
+ * Calculate the maximum number of bytes to transfer,
+ * making sure it is less than the DMA controller limit
+ */
+ copy = min_t(size_t, sg_dma_len(sg) - sg_used,
+ hw->length - hw_used);
+ copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
+
+ /*
+ * DMA_FROM_DEVICE
+ * from the hardware to the scatterlist
+ *
+ * DMA_TO_DEVICE
+ * from the scatterlist to the hardware
+ */
+ if (direction == DMA_FROM_DEVICE) {
+ dma_src = hw->address + hw_used;
+ dma_dst = sg_dma_address(sg) + sg_used;
+ } else {
+ dma_src = sg_dma_address(sg) + sg_used;
+ dma_dst = hw->address + hw_used;
+ }
+
+ /* Fill in the descriptor */
+ set_desc_cnt(fsl_chan, &new->hw, copy);
+ set_desc_src(fsl_chan, &new->hw, dma_src);
+ set_desc_dest(fsl_chan, &new->hw, dma_dst);
+
+ /*
+ * If this is not the first descriptor, chain the
+ * current descriptor after the previous descriptor
+ */
+ if (!first) {
+ first = new;
+ } else {
+ set_desc_next(fsl_chan, &prev->hw,
+ new->async_tx.phys);
+ }
+
+ new->async_tx.cookie = 0;
+ async_tx_ack(&new->async_tx);
+
+ prev = new;
+ sg_used += copy;
+ hw_used += copy;
+
+ /* Insert the link descriptor into the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+ }
+ }
+
+finished:
+
+ /* All of the hardware address/length pairs had length == 0 */
+ if (!first || !new)
+ return NULL;
+
+ new->async_tx.flags = flags;
+ new->async_tx.cookie = -EBUSY;
+
+ /* Set End-of-link to the last link descriptor of new list */
+ set_ld_eol(fsl_chan, new);
+
+ /* Enable extra controller features */
+ if (fsl_chan->set_src_loop_size)
+ fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size);
+
+ if (fsl_chan->set_dest_loop_size)
+ fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size);
+
+ if (fsl_chan->toggle_ext_start)
+ fsl_chan->toggle_ext_start(fsl_chan, slave->external_start);
+
+ if (fsl_chan->toggle_ext_pause)
+ fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause);
+
+ if (fsl_chan->set_request_count)
+ fsl_chan->set_request_count(fsl_chan, slave->request_count);
+
+ return &first->async_tx;
+
+fail:
+ /* If first was not set, then we failed to allocate the very first
+ * descriptor, and we're done */
+ if (!first)
+ return NULL;
+
+ /*
+ * First is set, so all of the descriptors we allocated have been added
+ * to first->tx_list, INCLUDING "first" itself. Therefore we
+ * must traverse the list backwards freeing each descriptor in turn
+ *
+ * We're re-using variables for the loop, oh well
+ */
+ tx_list = &first->tx_list;
+ list_for_each_entry_safe_reverse(new, prev, tx_list, node) {
+ list_del_init(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
+}
+
+static void fsl_dma_device_terminate_all(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *desc, *tmp;
+ unsigned long flags;
+
+ if (!chan)
+ return;
+
+ fsl_chan = to_fsl_chan(chan);
+
+ /* Halt the DMA engine */
+ dma_halt(fsl_chan);
+
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ /* Remove and free all of the descriptors in the LD queue */
+ list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) {
+ list_del(&desc->node);
+ dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+ }
+
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
- fsl_dma_update_completed_cookie(fsl_chan);
dev_dbg(fsl_chan->dev, "chan completed_cookie = %d\n",
fsl_chan->completed_cookie);
list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) {
dma_addr_t next_dest_addr;
unsigned long flags;
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
if (!dma_is_idle(fsl_chan))
- return;
+ goto out_unlock;
dma_halt(fsl_chan);
/* If there are some link descriptors
* not transfered in queue. We need to start it.
*/
- spin_lock_irqsave(&fsl_chan->desc_lock, flags);
/* Find the first un-transfer desciptor */
for (ld_node = fsl_chan->ld_queue.next;
fsl_chan->common.cookie) == DMA_SUCCESS);
ld_node = ld_node->next);
- spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
if (ld_node != &fsl_chan->ld_queue) {
/* Get the ld start address from ld_queue */
next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
- dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n",
- (void *)next_dest_addr);
+ dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
+ (unsigned long long)next_dest_addr);
set_cdar(fsl_chan, next_dest_addr);
dma_start(fsl_chan);
} else {
set_cdar(fsl_chan, 0);
set_ndar(fsl_chan, 0);
}
+
+out_unlock:
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
fsl_chan_xfer_ld_queue(fsl_chan);
}
-static void fsl_dma_dependency_added(struct dma_chan *chan)
-{
- struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
-
- fsl_chan_ld_cleanup(fsl_chan);
-}
-
/**
* fsl_dma_is_complete - Determine the DMA status
* @fsl_chan : Freescale DMA channel
{
struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
u32 stat;
+ int update_cookie = 0;
+ int xfer_ld_q = 0;
stat = get_sr(fsl_chan);
dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n",
if (stat & FSL_DMA_SR_TE)
dev_err(fsl_chan->dev, "Transfer Error!\n");
+ /* Programming Error
+ * The DMA_INTERRUPT async_tx is a NULL transfer, which will
+ * triger a PE interrupt.
+ */
+ if (stat & FSL_DMA_SR_PE) {
+ dev_dbg(fsl_chan->dev, "event: Programming Error INT\n");
+ if (get_bcr(fsl_chan) == 0) {
+ /* BCR register is 0, this is a DMA_INTERRUPT async_tx.
+ * Now, update the completed cookie, and continue the
+ * next uncompleted transfer.
+ */
+ update_cookie = 1;
+ xfer_ld_q = 1;
+ }
+ stat &= ~FSL_DMA_SR_PE;
+ }
+
/* If the link descriptor segment transfer finishes,
* we will recycle the used descriptor.
*/
if (stat & FSL_DMA_SR_EOSI) {
dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
- dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
- (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
+ dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
+ (unsigned long long)get_cdar(fsl_chan),
+ (unsigned long long)get_ndar(fsl_chan));
stat &= ~FSL_DMA_SR_EOSI;
+ update_cookie = 1;
+ }
+
+ /* For MPC8349, EOCDI event need to update cookie
+ * and start the next transfer if it exist.
+ */
+ if (stat & FSL_DMA_SR_EOCDI) {
+ dev_dbg(fsl_chan->dev, "event: End-of-Chain link INT\n");
+ stat &= ~FSL_DMA_SR_EOCDI;
+ update_cookie = 1;
+ xfer_ld_q = 1;
}
/* If it current transfer is the end-of-transfer,
* we should clear the Channel Start bit for
* prepare next transfer.
*/
- if (stat & (FSL_DMA_SR_EOLNI | FSL_DMA_SR_EOCDI)) {
+ if (stat & FSL_DMA_SR_EOLNI) {
dev_dbg(fsl_chan->dev, "event: End-of-link INT\n");
stat &= ~FSL_DMA_SR_EOLNI;
- fsl_chan_xfer_ld_queue(fsl_chan);
+ xfer_ld_q = 1;
}
+ if (update_cookie)
+ fsl_dma_update_completed_cookie(fsl_chan);
+ if (xfer_ld_q)
+ fsl_chan_xfer_ld_queue(fsl_chan);
if (stat)
dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n",
stat);
fsl_chan_ld_cleanup(fsl_chan);
}
-#ifdef FSL_DMA_CALLBACKTEST
-static void fsl_dma_callback_test(struct fsl_dma_chan *fsl_chan)
-{
- if (fsl_chan)
- dev_info(fsl_chan->dev, "selftest: callback is ok!\n");
-}
-#endif
-
-#ifdef CONFIG_FSL_DMA_SELFTEST
-static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
+static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
+ struct device_node *node, u32 feature, const char *compatible)
{
- struct dma_chan *chan;
- int err = 0;
- dma_addr_t dma_dest, dma_src;
- dma_cookie_t cookie;
- u8 *src, *dest;
- int i;
- size_t test_size;
- struct dma_async_tx_descriptor *tx1, *tx2, *tx3;
-
- test_size = 4096;
-
- src = kmalloc(test_size * 2, GFP_KERNEL);
- if (!src) {
- dev_err(fsl_chan->dev,
- "selftest: Cannot alloc memory for test!\n");
- err = -ENOMEM;
- goto out;
- }
-
- dest = src + test_size;
-
- for (i = 0; i < test_size; i++)
- src[i] = (u8) i;
-
- chan = &fsl_chan->common;
-
- if (fsl_dma_alloc_chan_resources(chan) < 1) {
- dev_err(fsl_chan->dev,
- "selftest: Cannot alloc resources for DMA\n");
- err = -ENODEV;
- goto out;
- }
-
- /* TX 1 */
- dma_src = dma_map_single(fsl_chan->dev, src, test_size / 2,
- DMA_TO_DEVICE);
- dma_dest = dma_map_single(fsl_chan->dev, dest, test_size / 2,
- DMA_FROM_DEVICE);
- tx1 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 2, 0);
- async_tx_ack(tx1);
-
- cookie = fsl_dma_tx_submit(tx1);
- fsl_dma_memcpy_issue_pending(chan);
- msleep(2);
-
- if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) {
- dev_err(fsl_chan->dev, "selftest: Time out!\n");
- err = -ENODEV;
- goto out;
- }
-
- /* Test free and re-alloc channel resources */
- fsl_dma_free_chan_resources(chan);
-
- if (fsl_dma_alloc_chan_resources(chan) < 1) {
- dev_err(fsl_chan->dev,
- "selftest: Cannot alloc resources for DMA\n");
- err = -ENODEV;
- goto free_resources;
- }
-
- /* Continue to test
- * TX 2
- */
- dma_src = dma_map_single(fsl_chan->dev, src + test_size / 2,
- test_size / 4, DMA_TO_DEVICE);
- dma_dest = dma_map_single(fsl_chan->dev, dest + test_size / 2,
- test_size / 4, DMA_FROM_DEVICE);
- tx2 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0);
- async_tx_ack(tx2);
-
- /* TX 3 */
- dma_src = dma_map_single(fsl_chan->dev, src + test_size * 3 / 4,
- test_size / 4, DMA_TO_DEVICE);
- dma_dest = dma_map_single(fsl_chan->dev, dest + test_size * 3 / 4,
- test_size / 4, DMA_FROM_DEVICE);
- tx3 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0);
- async_tx_ack(tx3);
-
- /* Test exchanging the prepared tx sort */
- cookie = fsl_dma_tx_submit(tx3);
- cookie = fsl_dma_tx_submit(tx2);
-
-#ifdef FSL_DMA_CALLBACKTEST
- if (dma_has_cap(DMA_INTERRUPT, ((struct fsl_dma_device *)
- dev_get_drvdata(fsl_chan->dev->parent))->common.cap_mask)) {
- tx3->callback = fsl_dma_callback_test;
- tx3->callback_param = fsl_chan;
- }
-#endif
- fsl_dma_memcpy_issue_pending(chan);
- msleep(2);
-
- if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) {
- dev_err(fsl_chan->dev, "selftest: Time out!\n");
- err = -ENODEV;
- goto free_resources;
- }
-
- err = memcmp(src, dest, test_size);
- if (err) {
- for (i = 0; (*(src + i) == *(dest + i)) && (i < test_size);
- i++);
- dev_err(fsl_chan->dev, "selftest: Test failed, data %d/%ld is "
- "error! src 0x%x, dest 0x%x\n",
- i, (long)test_size, *(src + i), *(dest + i));
- }
-
-free_resources:
- fsl_dma_free_chan_resources(chan);
-out:
- kfree(src);
- return err;
-}
-#endif
-
-static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
- const struct of_device_id *match)
-{
- struct fsl_dma_device *fdev;
struct fsl_dma_chan *new_fsl_chan;
int err;
- fdev = dev_get_drvdata(dev->dev.parent);
- BUG_ON(!fdev);
-
/* alloc channel */
new_fsl_chan = kzalloc(sizeof(struct fsl_dma_chan), GFP_KERNEL);
if (!new_fsl_chan) {
- dev_err(&dev->dev, "No free memory for allocating "
+ dev_err(fdev->dev, "No free memory for allocating "
"dma channels!\n");
- err = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
/* get dma channel register base */
- err = of_address_to_resource(dev->node, 0, &new_fsl_chan->reg);
+ err = of_address_to_resource(node, 0, &new_fsl_chan->reg);
if (err) {
- dev_err(&dev->dev, "Can't get %s property 'reg'\n",
- dev->node->full_name);
- goto err;
+ dev_err(fdev->dev, "Can't get %s property 'reg'\n",
+ node->full_name);
+ goto err_no_reg;
}
- new_fsl_chan->feature = *(u32 *)match->data;
+ new_fsl_chan->feature = feature;
if (!fdev->feature)
fdev->feature = new_fsl_chan->feature;
*/
WARN_ON(fdev->feature != new_fsl_chan->feature);
- new_fsl_chan->dev = &dev->dev;
+ new_fsl_chan->dev = fdev->dev;
new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
- if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
- dev_err(&dev->dev, "There is no %d channel!\n",
+ if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ dev_err(fdev->dev, "There is no %d channel!\n",
new_fsl_chan->id);
err = -EINVAL;
- goto err;
+ goto err_no_chan;
}
fdev->chan[new_fsl_chan->id] = new_fsl_chan;
tasklet_init(&new_fsl_chan->tasklet, dma_do_tasklet,
switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
- new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
case FSL_DMA_IP_83XX:
+ new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
+ new_fsl_chan->set_request_count = fsl_chan_set_request_count;
}
spin_lock_init(&new_fsl_chan->desc_lock);
&fdev->common.channels);
fdev->common.chancnt++;
- new_fsl_chan->irq = irq_of_parse_and_map(dev->node, 0);
+ new_fsl_chan->irq = irq_of_parse_and_map(node, 0);
if (new_fsl_chan->irq != NO_IRQ) {
err = request_irq(new_fsl_chan->irq,
&fsl_dma_chan_do_interrupt, IRQF_SHARED,
"fsldma-channel", new_fsl_chan);
if (err) {
- dev_err(&dev->dev, "DMA channel %s request_irq error "
- "with return %d\n", dev->node->full_name, err);
- goto err;
+ dev_err(fdev->dev, "DMA channel %s request_irq error "
+ "with return %d\n", node->full_name, err);
+ goto err_no_irq;
}
}
-#ifdef CONFIG_FSL_DMA_SELFTEST
- err = fsl_dma_self_test(new_fsl_chan);
- if (err)
- goto err;
-#endif
-
- dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
- match->compatible, new_fsl_chan->irq);
+ dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
+ compatible,
+ new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
return 0;
-err:
- dma_halt(new_fsl_chan);
- iounmap(new_fsl_chan->reg_base);
- free_irq(new_fsl_chan->irq, new_fsl_chan);
+
+err_no_irq:
list_del(&new_fsl_chan->common.device_node);
+err_no_chan:
+ iounmap(new_fsl_chan->reg_base);
+err_no_reg:
kfree(new_fsl_chan);
return err;
}
-const u32 mpc8540_dma_ip_feature = FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN;
-const u32 mpc8349_dma_ip_feature = FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN;
-
-static struct of_device_id of_fsl_dma_chan_ids[] = {
- {
- .compatible = "fsl,mpc8540-dma-channel",
- .data = (void *)&mpc8540_dma_ip_feature,
- },
- {
- .compatible = "fsl,mpc8349-dma-channel",
- .data = (void *)&mpc8349_dma_ip_feature,
- },
- {}
-};
-
-static struct of_platform_driver of_fsl_dma_chan_driver = {
- .name = "of-fsl-dma-channel",
- .match_table = of_fsl_dma_chan_ids,
- .probe = of_fsl_dma_chan_probe,
-};
-
-static __init int of_fsl_dma_chan_init(void)
+static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
{
- return of_register_platform_driver(&of_fsl_dma_chan_driver);
+ if (fchan->irq != NO_IRQ)
+ free_irq(fchan->irq, fchan);
+ list_del(&fchan->common.device_node);
+ iounmap(fchan->reg_base);
+ kfree(fchan);
}
static int __devinit of_fsl_dma_probe(struct of_device *dev,
const struct of_device_id *match)
{
int err;
- unsigned int irq;
struct fsl_dma_device *fdev;
+ struct device_node *child;
fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL);
if (!fdev) {
dev_err(&dev->dev, "No enough memory for 'priv'\n");
- err = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
fdev->dev = &dev->dev;
INIT_LIST_HEAD(&fdev->common.channels);
if (err) {
dev_err(&dev->dev, "Can't get %s property 'reg'\n",
dev->node->full_name);
- goto err;
+ goto err_no_reg;
}
dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
- "controller at %p...\n",
- match->compatible, (void *)fdev->reg.start);
+ "controller at 0x%llx...\n",
+ match->compatible, (unsigned long long)fdev->reg.start);
fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
- fdev->reg.start + 1);
dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
fdev->common.device_is_tx_complete = fsl_dma_is_complete;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
- fdev->common.device_dependency_added = fsl_dma_dependency_added;
+ fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
+ fdev->common.device_terminate_all = fsl_dma_device_terminate_all;
fdev->common.dev = &dev->dev;
- irq = irq_of_parse_and_map(dev->node, 0);
- if (irq != NO_IRQ) {
- err = request_irq(irq, &fsl_dma_do_interrupt, IRQF_SHARED,
+ fdev->irq = irq_of_parse_and_map(dev->node, 0);
+ if (fdev->irq != NO_IRQ) {
+ err = request_irq(fdev->irq, &fsl_dma_do_interrupt, IRQF_SHARED,
"fsldma-device", fdev);
if (err) {
dev_err(&dev->dev, "DMA device request_irq error "
}
dev_set_drvdata(&(dev->dev), fdev);
- of_platform_bus_probe(dev->node, of_fsl_dma_chan_ids, &dev->dev);
+
+ /* We cannot use of_platform_bus_probe() because there is no
+ * of_platform_bus_remove. Instead, we manually instantiate every DMA
+ * channel object.
+ */
+ for_each_child_of_node(dev->node, child) {
+ if (of_device_is_compatible(child, "fsl,eloplus-dma-channel"))
+ fsl_dma_chan_probe(fdev, child,
+ FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN,
+ "fsl,eloplus-dma-channel");
+ if (of_device_is_compatible(child, "fsl,elo-dma-channel"))
+ fsl_dma_chan_probe(fdev, child,
+ FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN,
+ "fsl,elo-dma-channel");
+ }
dma_async_device_register(&fdev->common);
return 0;
err:
iounmap(fdev->reg_base);
+err_no_reg:
kfree(fdev);
return err;
}
+static int of_fsl_dma_remove(struct of_device *of_dev)
+{
+ struct fsl_dma_device *fdev;
+ unsigned int i;
+
+ fdev = dev_get_drvdata(&of_dev->dev);
+
+ dma_async_device_unregister(&fdev->common);
+
+ for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++)
+ if (fdev->chan[i])
+ fsl_dma_chan_remove(fdev->chan[i]);
+
+ if (fdev->irq != NO_IRQ)
+ free_irq(fdev->irq, fdev);
+
+ iounmap(fdev->reg_base);
+
+ kfree(fdev);
+ dev_set_drvdata(&of_dev->dev, NULL);
+
+ return 0;
+}
+
static struct of_device_id of_fsl_dma_ids[] = {
- { .compatible = "fsl,mpc8540-dma", },
- { .compatible = "fsl,mpc8349-dma", },
+ { .compatible = "fsl,eloplus-dma", },
+ { .compatible = "fsl,elo-dma", },
{}
};
static struct of_platform_driver of_fsl_dma_driver = {
- .name = "of-fsl-dma",
+ .name = "fsl-elo-dma",
.match_table = of_fsl_dma_ids,
.probe = of_fsl_dma_probe,
+ .remove = of_fsl_dma_remove,
};
static __init int of_fsl_dma_init(void)
{
- return of_register_platform_driver(&of_fsl_dma_driver);
+ int ret;
+
+ pr_info("Freescale Elo / Elo Plus DMA driver\n");
+
+ ret = of_register_platform_driver(&of_fsl_dma_driver);
+ if (ret)
+ pr_err("fsldma: failed to register platform driver\n");
+
+ return ret;
+}
+
+static void __exit of_fsl_dma_exit(void)
+{
+ of_unregister_platform_driver(&of_fsl_dma_driver);
}
-subsys_initcall(of_fsl_dma_chan_init);
subsys_initcall(of_fsl_dma_init);
+module_exit(of_fsl_dma_exit);
+
+MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver");
+MODULE_LICENSE("GPL");