static int printable; /* Is console ready for printing? */
int default_utf8 = true;
module_param(default_utf8, int, S_IRUGO | S_IWUSR);
+int global_cursor_default = -1;
+module_param(global_cursor_default, int, S_IRUGO | S_IWUSR);
+
+static int cur_default = CUR_DEFAULT;
+module_param(cur_default, int, S_IRUGO | S_IWUSR);
/*
* ignore_poke: don't unblank the screen when things are typed. This is
* fg_console is the current virtual console,
* last_console is the last used one,
* want_console is the console we want to switch to,
- * kmsg_redirect is the console for kernel messages,
*/
int fg_console;
int last_console;
int want_console = -1;
-int kmsg_redirect;
/*
* For each existing display, we have a pointer to console currently visible
struct vt_notifier_param param = { .vc = vc };
atomic_notifier_call_chain(&vt_notifier_list, VT_UPDATE, ¶m);
}
-
/*
* Low-Level Functions
*/
vc_cons[currcons].d = NULL;
return -ENOMEM;
}
+
+ /* If no drivers have overridden us and the user didn't pass a
+ boot option, default to displaying the cursor */
+ if (global_cursor_default == -1)
+ global_cursor_default = 1;
+
vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
vcs_make_sysfs(currcons);
atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m);
*
* Resize a virtual console, clipping according to the actual constraints.
* If the caller passes a tty structure then update the termios winsize
- * information and perform any neccessary signal handling.
+ * information and perform any necessary signal handling.
*
* Caller must hold the console semaphore. Takes the termios mutex and
* ctrl_lock of the tty IFF a tty is passed.
if (CON_IS_VISIBLE(vc))
update_screen(vc);
+ vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num);
return err;
}
vc->vc_decscnm = 0;
vc->vc_decom = 0;
vc->vc_decawm = 1;
- vc->vc_deccm = 1;
+ vc->vc_deccm = global_cursor_default;
vc->vc_decim = 0;
set_kbd(vc, decarm);
/* do not do set_leds here because this causes an endless tasklet loop
when the keyboard hasn't been initialized yet */
- vc->vc_cursor_type = CUR_DEFAULT;
+ vc->vc_cursor_type = cur_default;
vc->vc_complement_mask = vc->vc_s_complement_mask;
default_attr(vc);
if (vc->vc_par[0])
vc->vc_cursor_type = vc->vc_par[0] | (vc->vc_par[1] << 8) | (vc->vc_par[2] << 16);
else
- vc->vc_cursor_type = CUR_DEFAULT;
+ vc->vc_cursor_type = cur_default;
return;
}
break;
uint8_t inverse;
uint8_t width;
u16 himask, charmask;
- const unsigned char *orig_buf = NULL;
- int orig_count;
if (in_interrupt())
return count;
currcons = vc->vc_num;
if (!vc_cons_allocated(currcons)) {
/* could this happen? */
- static int error = 0;
- if (!error) {
- error = 1;
- printk("con_write: tty %d not allocated\n", currcons+1);
- }
+ printk_once("con_write: tty %d not allocated\n", currcons+1);
release_console_sem();
return 0;
}
- orig_buf = buf;
- orig_count = count;
himask = vc->vc_hi_font_mask;
charmask = himask ? 0x1ff : 0xff;
#ifdef CONFIG_VT_CONSOLE
+/**
+ * vt_kmsg_redirect() - Sets/gets the kernel message console
+ * @new: The new virtual terminal number or -1 if the console should stay
+ * unchanged
+ *
+ * By default, the kernel messages are always printed on the current virtual
+ * console. However, the user may modify that default with the
+ * TIOCL_SETKMSGREDIRECT ioctl call.
+ *
+ * This function sets the kernel message console to be @new. It returns the old
+ * virtual console number. The virtual terminal number 0 (both as parameter and
+ * return value) means no redirection (i.e. always printed on the currently
+ * active console).
+ *
+ * The parameter -1 means that only the current console is returned, but the
+ * value is not modified. You may use the macro vt_get_kmsg_redirect() in that
+ * case to make the code more understandable.
+ *
+ * When the kernel is compiled without CONFIG_VT_CONSOLE, this function ignores
+ * the parameter and always returns 0.
+ */
+int vt_kmsg_redirect(int new)
+{
+ static int kmsg_con;
+
+ if (new != -1)
+ return xchg(&kmsg_con, new);
+ else
+ return kmsg_con;
+}
+
/*
* Console on virtual terminal
*
const ushort *start;
ushort cnt = 0;
ushort myx;
+ int kmsg_console;
/* console busy or not yet initialized */
if (!printable)
if (!spin_trylock(&printing_lock))
return;
- if (kmsg_redirect && vc_cons_allocated(kmsg_redirect - 1))
- vc = vc_cons[kmsg_redirect - 1].d;
+ kmsg_console = vt_get_kmsg_redirect();
+ if (kmsg_console && vc_cons_allocated(kmsg_console - 1))
+ vc = vc_cons[kmsg_console - 1].d;
/* read `x' only after setting currcons properly (otherwise
the `x' macro will read the x of the foreground console). */
ret = set_vesa_blanking(p);
break;
case TIOCL_GETKMSGREDIRECT:
- data = kmsg_redirect;
+ data = vt_get_kmsg_redirect();
ret = __put_user(data, p);
break;
case TIOCL_SETKMSGREDIRECT:
if (get_user(data, p+1))
ret = -EFAULT;
else
- kmsg_redirect = data;
+ vt_kmsg_redirect(data);
}
break;
case TIOCL_GETFGCONSOLE:
.flush_chars = con_flush_chars,
.chars_in_buffer = con_chars_in_buffer,
.ioctl = vt_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = vt_compat_ioctl,
+#endif
.stop = con_stop,
.start = con_start,
.throttle = con_throttle,
blank_state = blank_vesa_wait;
mod_timer(&console_timer, jiffies + vesa_off_interval);
}
+ vt_event_post(VT_EVENT_BLANK, vc->vc_num, vc->vc_num);
}
EXPORT_SYMBOL(do_blank_screen);
console_blank_hook(0);
set_palette(vc);
set_cursor(vc);
+ vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num);
}
EXPORT_SYMBOL(do_unblank_screen);
EXPORT_SYMBOL(console_blank_hook);
EXPORT_SYMBOL(console_blanked);
EXPORT_SYMBOL(vc_cons);
+EXPORT_SYMBOL(global_cursor_default);
#ifndef VT_SINGLE_DRIVER
EXPORT_SYMBOL(take_over_console);
EXPORT_SYMBOL(give_up_console);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff