#include <linux/module.h>
#include <linux/types.h>
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <asm/amigahw.h>
#include <linux/zorro.h>
#include <asm/irq.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/generic_serial.h>
+#include <linux/tty_flip.h>
#include "ser_a2232.h"
#include "ser_a2232fw.h"
/***************************** Prototypes ***************************/
/* The interrupt service routine */
-static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp);
+static irqreturn_t a2232_vbl_inter(int irq, void *data);
/* Initialize the port structures */
static void a2232_init_portstructs(void);
/* Initialize and register TTY drivers. */
static void a2232_enable_tx_interrupts(void *ptr);
static void a2232_disable_rx_interrupts(void *ptr);
static void a2232_enable_rx_interrupts(void *ptr);
-static int a2232_get_CD(void *ptr);
+static int a2232_carrier_raised(struct tty_port *port);
static void a2232_shutdown_port(void *ptr);
static int a2232_set_real_termios(void *ptr);
static int a2232_chars_in_buffer(void *ptr);
a2232_enable_tx_interrupts,
a2232_disable_rx_interrupts,
a2232_enable_rx_interrupts,
- a2232_get_CD,
a2232_shutdown_port,
a2232_set_real_termios,
a2232_chars_in_buffer,
Maybe one could implement a more efficient version by not only
transferring one character at a time.
*/
- struct tty_struct *tty = port->gs.tty;
-
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return;
-
- tty->flip.count++;
+ struct tty_struct *tty = port->gs.port.tty;
#if 0
switch(err) {
}
#endif
- *tty->flip.flag_buf_ptr++ = err;
- *tty->flip.char_buf_ptr++ = ch;
+ tty_insert_flip_char(tty, ch, err);
tty_flip_buffer_push(tty);
}
/* Does this here really have to be? */
local_irq_save(flags);
- port->gs.flags &= ~GS_TX_INTEN;
+ port->gs.port.flags &= ~GS_TX_INTEN;
local_irq_restore(flags);
}
/* Does this here really have to be? */
local_irq_save(flags);
- port->gs.flags |= GS_TX_INTEN;
+ port->gs.port.flags |= GS_TX_INTEN;
local_irq_restore(flags);
}
port->disable_rx = 0;
}
-static int a2232_get_CD(void *ptr)
+static int a2232_carrier_raised(struct tty_port *port)
{
- return ((struct a2232_port *) ptr)->cd_status;
+ struct a2232_port *ap = container_of(port, struct a2232_port, gs.port);
+ return ap->cd_status;
}
static void a2232_shutdown_port(void *ptr)
local_irq_save(flags);
- port->gs.flags &= ~GS_ACTIVE;
+ port->gs.port.flags &= ~GS_ACTIVE;
- if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
+ if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
/* Set DTR and RTS to Low, flush output.
The NetBSD driver "msc.c" does it this way. */
stat->Command = ( (stat->Command & ~A2232CMD_CMask) |
volatile struct a2232status *status;
volatile struct a2232memory *mem;
- if (!port->gs.tty || !port->gs.tty->termios) return 0;
+ if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
status = a2232stat(port->which_a2232, port->which_port_on_a2232);
mem = a2232mem(port->which_a2232);
}
a2232_param |= rate;
- cflag = port->gs.tty->termios->c_cflag;
+ cflag = port->gs.port.tty->termios->c_cflag;
// get character size
chsize = cflag & CSIZE;
the conventional way of inserting START/STOP characters
by hand in throttle()/unthrottle().
*/
- softflow = !!( port->gs.tty->termios->c_iflag & IXOFF );
+ softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF );
// get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
parity = cflag & (PARENB | PARODD);
/* Hmm. Maybe an own a2232_port structure
member would be cleaner? */
if (cflag & CLOCAL)
- port->gs.flags &= ~ASYNC_CHECK_CD;
+ port->gs.port.flags &= ~ASYNC_CHECK_CD;
else
- port->gs.flags |= ASYNC_CHECK_CD;
+ port->gs.port.flags |= ASYNC_CHECK_CD;
/* Now we have all parameters and can go to set them: */
if switched on. So the only thing we can do at this
layer here is not taking any characters out of the
A2232 buffer any more. */
- struct a2232_port *port = (struct a2232_port *) tty->driver_data;
+ struct a2232_port *port = tty->driver_data;
port->throttle_input = -1;
}
static void a2232_unthrottle(struct tty_struct *tty)
{
/* Unthrottle: dual to "throttle()" above. */
- struct a2232_port *port = (struct a2232_port *) tty->driver_data;
+ struct a2232_port *port = tty->driver_data;
port->throttle_input = 0;
}
port = &a2232_ports[line];
tty->driver_data = port;
- port->gs.tty = tty;
- port->gs.count++;
+ port->gs.port.tty = tty;
+ port->gs.port.count++;
retval = gs_init_port(&port->gs);
if (retval) {
- port->gs.count--;
+ port->gs.port.count--;
return retval;
}
- port->gs.flags |= GS_ACTIVE;
+ port->gs.port.flags |= GS_ACTIVE;
retval = gs_block_til_ready(port, filp);
if (retval) {
- port->gs.count--;
+ port->gs.port.count--;
return retval;
}
}
/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp)
+static irqreturn_t a2232_vbl_inter(int irq, void *data)
{
#if A2232_IOBUFLEN != 256
#error "Re-Implement a2232_vbl_inter()!"
for (p = 0; p < NUMLINES; p++){ /* for every port on this board */
err = 0;
port = &a2232_ports[n*NUMLINES+p];
- if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */
+ if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */
status = a2232stat(n,p);
obuf = mem->OutBuf[p];
bufpos = status->OutHead;
while ( (port->gs.xmit_cnt > 0) &&
- (!port->gs.tty->stopped) &&
- (!port->gs.tty->hw_stopped) ){ /* While there are chars to transmit */
+ (!port->gs.port.tty->stopped) &&
+ (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */
if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */
port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
status->OutHead = bufpos;
/* WakeUp if output buffer runs low */
- if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
- tty_wakeup(port->gs.tty);
+ if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
+ tty_wakeup(port->gs.port.tty);
}
} // if the port is used
} // for every port on the board
struct a2232_port *port = &a2232_ports[n*7+p];
port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
- if (!(port->gs.flags & ASYNC_CHECK_CD))
+ if (!(port->gs.port.flags & ASYNC_CHECK_CD))
; /* Don't report DCD changes */
else if (port->cd_status) { // if DCD on: DCD went UP!
/* Are we blocking in open?*/
- wake_up_interruptible(&port->gs.open_wait);
+ wake_up_interruptible(&port->gs.port.open_wait);
}
else { // if DCD off: DCD went DOWN!
- if (port->gs.tty)
- tty_hangup (port->gs.tty);
+ if (port->gs.port.tty)
+ tty_hangup (port->gs.port.tty);
}
} // if CD changed for this port
return IRQ_HANDLED;
}
+static const struct tty_port_operations a2232_port_ops = {
+ .carrier_raised = a2232_carrier_raised,
+};
+
static void a2232_init_portstructs(void)
{
struct a2232_port *port;
for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) {
port = a2232_ports + i;
+ tty_port_init(&port->gs.port);
+ port->gs.port.ops = &a2232_port_ops;
port->which_a2232 = i/NUMLINES;
port->which_port_on_a2232 = i%NUMLINES;
port->disable_rx = port->throttle_input = port->cd_status = 0;
port->gs.close_delay = HZ/2;
port->gs.closing_wait = 30 * HZ;
port->gs.rd = &a2232_real_driver;
-#ifdef NEW_WRITE_LOCKING
- init_MUTEX(&(port->gs.port_write_sem));
-#endif
- init_waitqueue_head(&port->gs.open_wait);
- init_waitqueue_head(&port->gs.close_wait);
}
}
-static struct tty_operations a2232_ops = {
+static const struct tty_operations a2232_ops = {
.open = a2232_open,
.close = gs_close,
.write = gs_write,
a2232_driver->init_termios = tty_std_termios;
a2232_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ a2232_driver->init_termios.c_ispeed = 9600;
+ a2232_driver->init_termios.c_ospeed = 9600;
a2232_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(a2232_driver, &a2232_ops);
if ((error = tty_register_driver(a2232_driver))) {