unsigned short shift_count;
struct isi_port * ports;
signed char count;
- unsigned char isa;
spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
unsigned long flags;
};
printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
card->base);
- return 0; /* Failed to aquire the card! */
+ return 0; /* Failed to acquire the card! */
}
static int lock_card_at_interrupt(struct isi_board *card)
spin_unlock_irqrestore(&card->card_lock, card->flags);
}
/* Failing in interrupt is an acceptable event */
- return 0; /* Failed to aquire the card! */
+ return 0; /* Failed to acquire the card! */
}
static void unlock_card(struct isi_board *card)
/* Interrupt handlers */
-static void isicom_bottomhalf(void *data)
+static void isicom_bottomhalf(struct work_struct *work)
{
- struct isi_port *port = (struct isi_port *) data;
+ struct isi_port *port = container_of(work, struct isi_port, bh_tqueue);
struct tty_struct *tty = port->tty;
if (!tty)
* Main interrupt handler routine
*/
-static irqreturn_t isicom_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t isicom_interrupt(int irq, void *dev_id)
{
struct isi_board *card = dev_id;
struct isi_port *port;
base = card->base;
spin_lock(&card->card_lock);
- if (card->isa == NO) {
- /*
- * disable any interrupts from the PCI card and lower the
- * interrupt line
- */
- outw(0x8000, base+0x04);
- ClearInterrupt(base);
- }
+ /*
+ * disable any interrupts from the PCI card and lower the
+ * interrupt line
+ */
+ outw(0x8000, base+0x04);
+ ClearInterrupt(base);
inw(base); /* get the dummy word out */
header = inw(base);
if (channel + 1 > card->port_count) {
printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
"%d(channel) > port_count.\n", base, channel+1);
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
port = card->ports + channel;
if (!(port->flags & ASYNC_INITIALIZED)) {
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
return IRQ_HANDLED;
}
}
if (byte_count & 0x01)
inw(base);
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
}
tty_flip_buffer_push(tty);
}
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
return IRQ_HANDLED;
}
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
+ struct isi_board *card;
unsigned long flags;
if (!port)
return;
+ card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_close"))
return;
if (isicom_paranoia_check(port, tty->name, "isicom_write"))
return 0;
- if (!tty || !port->xmit_buf)
+ if (!port->xmit_buf)
return 0;
spin_lock_irqsave(&card->card_lock, flags);
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
return;
- if (!tty || !port->xmit_buf)
+ if (!port->xmit_buf)
return;
spin_lock_irqsave(&card->card_lock, flags);
/* set_termios et all */
static void isicom_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct isi_port *port = tty->driver_data;
}
/* hangup et all */
-static void do_isicom_hangup(void *data)
+static void do_isicom_hangup(struct work_struct *work)
{
- struct isi_port *port = data;
+ struct isi_port *port = container_of(work, struct isi_port, hangup_tq);
struct tty_struct *tty;
tty = port->tty;
* Driver init and deinit functions
*/
-static int __devinit isicom_register_ioregion(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return -EINVAL;
-
- if (!request_region(board->base, 16, ISICOM_NAME)) {
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
- "will be disabled.\n", board->base, board->base + 15,
- index + 1);
- return -EBUSY;
- }
-
- return 0;
-}
-
-static void isicom_unregister_ioregion(struct pci_dev *pdev)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return;
-
- release_region(board->base, 16);
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx released.\n",
- board->base, board->base + 15);
- board->base = 0;
-}
-
-static struct tty_operations isicom_ops = {
+static const struct tty_operations isicom_ops = {
.open = isicom_open,
.close = isicom_close,
.write = isicom_write,
.tiocmset = isicom_tiocmset,
};
-static int __devinit isicom_register_tty_driver(void)
-{
- int error = -ENOMEM;
-
- /* tty driver structure initialization */
- isicom_normal = alloc_tty_driver(PORT_COUNT);
- if (!isicom_normal)
- goto end;
-
- isicom_normal->owner = THIS_MODULE;
- isicom_normal->name = "ttyM";
- isicom_normal->devfs_name = "isicom/";
- isicom_normal->major = ISICOM_NMAJOR;
- isicom_normal->minor_start = 0;
- isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
- isicom_normal->subtype = SERIAL_TYPE_NORMAL;
- isicom_normal->init_termios = tty_std_termios;
- isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- isicom_normal->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(isicom_normal, &isicom_ops);
-
- if ((error = tty_register_driver(isicom_normal))) {
- pr_dbg("Couldn't register the dialin driver, error=%d\n",
- error);
- put_tty_driver(isicom_normal);
- }
-end:
- return error;
-}
-
-static void isicom_unregister_tty_driver(void)
-{
- int error;
-
- if ((error = tty_unregister_driver(isicom_normal)))
- pr_dbg("couldn't unregister normal driver, error=%d.\n", error);
-
- put_tty_driver(isicom_normal);
-}
-
-static int __devinit isicom_register_isr(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- unsigned long irqflags = SA_INTERRUPT;
- int retval = -EINVAL;
-
- if (!board->base)
- goto end;
-
- if (board->isa == NO)
- irqflags |= SA_SHIRQ;
-
- retval = request_irq(board->irq, isicom_interrupt, irqflags,
- ISICOM_NAME, board);
- if (retval < 0)
- dev_warn(&pdev->dev, "Could not install handler at Irq %d. "
- "Card%d will be disabled.\n", board->irq, index + 1);
- else
- retval = 0;
-end:
- return retval;
-}
-
static int __devinit reset_card(struct pci_dev *pdev,
const unsigned int card, unsigned int *signature)
{
*signature = inw(base + 0x4) & 0xff;
- if (board->isa == YES) {
- if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
- } else {
- portcount = inw(base + 0x2);
- if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
- (portcount != 4) && (portcount != 8))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
+ portcount = inw(base + 0x2);
+ if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
+ (portcount != 4) && (portcount != 8))) {
+ dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
+ inw(base + 0x2), inw(base + 0xe));
+ dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
+ "(Possible bad I/O Port Address 0x%lx).\n",
+ card + 1, base);
+ retval = -EIO;
+ goto end;
}
switch (*signature) {
case 0xa5:
case 0xbb:
case 0xdd:
- board->port_count = (board->isa == NO && portcount == 4) ? 4 :
- 8;
+ board->port_count = (portcount == 4) ? 4 : 8;
board->shift_count = 12;
break;
case 0xcc:
if (retval)
goto end;
+ retval = -EIO;
+
for (frame = (struct stframe *)fw->data;
frame < (struct stframe *)(fw->data + fw->size);
- frame++) {
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
if (WaitTillCardIsFree(base))
goto errrelfw;
}
}
- retval = -EIO;
-
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- outw(0xf2, base);
- outw(0x800, base);
- outw(0x0, base);
- outw(0x0, base);
- InterruptTheCard(base);
- outw(0x0, base + 0x4); /* for ISI4608 cards */
-
/* XXX: should we test it by reading it back and comparing with original like
* in load firmware package? */
- for (frame = (struct stframe*)fw->data;
- frame < (struct stframe*)(fw->data + fw->size);
- frame++) {
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
if (WaitTillCardIsFree(base))
goto errrelfw;
}
}
+ /* xfer ctrl */
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf2, base);
+ outw(0x800, base);
+ outw(0x0, base);
+ outw(0x0, base);
+ InterruptTheCard(base);
+ outw(0x0, base + 0x4); /* for ISI4608 cards */
+
board->status |= FIRMWARE_LOADED;
retval = 0;
/*
* Insmod can set static symbols so keep these static
*/
-static int io[4];
-static int irq[4];
static int card;
static int __devinit isicom_probe(struct pci_dev *pdev,
board->base = ioaddr;
board->irq = pciirq;
- board->isa = NO;
card++;
pci_set_drvdata(pdev, board);
- retval = isicom_register_ioregion(pdev, index);
- if (retval < 0)
+ if (!request_region(board->base, 16, ISICOM_NAME)) {
+ dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
+ "will be disabled.\n", board->base, board->base + 15,
+ index + 1);
+ retval = -EBUSY;
goto err;
+ }
- retval = isicom_register_isr(pdev, index);
- if (retval < 0)
+ retval = request_irq(board->irq, isicom_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ if (retval < 0) {
+ dev_err(&pdev->dev, "Could not install handler at Irq %d. "
+ "Card%d will be disabled.\n", board->irq, index + 1);
goto errunrr;
+ }
retval = reset_card(pdev, index, &signature);
if (retval < 0)
errunri:
free_irq(board->irq, board);
errunrr:
- isicom_unregister_ioregion(pdev);
+ release_region(board->base, 16);
err:
board->base = 0;
return retval;
struct isi_board *board = pci_get_drvdata(pdev);
free_irq(board->irq, board);
- isicom_unregister_ioregion(pdev);
+ release_region(board->base, 16);
}
-static int __devinit isicom_setup(void)
+static int __init isicom_init(void)
{
int retval, idx, channel;
struct isi_port *port;
card = 0;
- memset(isi_ports, 0, sizeof(isi_ports));
for(idx = 0; idx < BOARD_COUNT; idx++) {
port = &isi_ports[idx * 16];
port->channel = channel;
port->close_delay = 50 * HZ/100;
port->closing_wait = 3000 * HZ/100;
- INIT_WORK(&port->hangup_tq, do_isicom_hangup, port);
- INIT_WORK(&port->bh_tqueue, isicom_bottomhalf, port);
+ INIT_WORK(&port->hangup_tq, do_isicom_hangup);
+ INIT_WORK(&port->bh_tqueue, isicom_bottomhalf);
port->status = 0;
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
}
isi_card[idx].base = 0;
isi_card[idx].irq = 0;
-
- if (!io[idx])
- continue;
-
- if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4 ||
- irq[idx] == 5 || irq[idx] == 7 ||
- irq[idx] == 10 || irq[idx] == 11 ||
- irq[idx] == 12 || irq[idx] == 15) {
- printk(KERN_ERR "ISICOM: ISA not supported yet.\n");
- retval = -EINVAL;
- goto error;
- } else
- printk(KERN_ERR "ISICOM: Irq %d unsupported. "
- "Disabling Card%d...\n", irq[idx], idx + 1);
}
- retval = isicom_register_tty_driver();
- if (retval < 0)
+ /* tty driver structure initialization */
+ isicom_normal = alloc_tty_driver(PORT_COUNT);
+ if (!isicom_normal) {
+ retval = -ENOMEM;
goto error;
+ }
+
+ isicom_normal->owner = THIS_MODULE;
+ isicom_normal->name = "ttyM";
+ isicom_normal->major = ISICOM_NMAJOR;
+ isicom_normal->minor_start = 0;
+ isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
+ isicom_normal->subtype = SERIAL_TYPE_NORMAL;
+ isicom_normal->init_termios = tty_std_termios;
+ isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
+ isicom_normal->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(isicom_normal, &isicom_ops);
+
+ retval = tty_register_driver(isicom_normal);
+ if (retval) {
+ pr_dbg("Couldn't register the dialin driver\n");
+ goto err_puttty;
+ }
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
- goto errtty;
+ goto err_unrtty;
}
init_timer(&tx);
add_timer(&tx);
return 0;
-errtty:
- isicom_unregister_tty_driver();
+err_unrtty:
+ tty_unregister_driver(isicom_normal);
+err_puttty:
+ put_tty_driver(isicom_normal);
error:
return retval;
}
msleep(10);
pci_unregister_driver(&isicom_driver);
- isicom_unregister_tty_driver();
+ tty_unregister_driver(isicom_normal);
+ put_tty_driver(isicom_normal);
}
-module_init(isicom_setup);
+module_init(isicom_init);
module_exit(isicom_exit);
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for the cards");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for the cards");