*/
#include <linux/module.h>
+#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/mm.h>
-#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/delay.h>
static struct timer_list tx;
static char re_schedule = 1;
-static int ISILoad_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
-
static void isicom_tx(unsigned long _data);
static void isicom_start(struct tty_struct *tty);
unsigned char irq;
unsigned char port_count;
unsigned short status;
- unsigned short port_status; /* each bit represents a single port */
+ unsigned short port_status; /* each bit for each port */
unsigned short shift_count;
struct isi_port * ports;
signed char count;
- unsigned char isa;
spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
unsigned long flags;
};
udelay(1000); /* 1ms */
}
}
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n", card->base);
- return 0; /* Failed to aquire the card! */
+ printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
+ card->base);
+
+ return 0; /* Failed to acquire the card! */
}
static int lock_card_at_interrupt(struct isi_board *card)
spin_unlock_irqrestore(&card->card_lock, card->flags);
}
/* Failing in interrupt is an acceptable event */
- return 0; /* Failed to aquire the card! */
+ return 0; /* Failed to acquire the card! */
}
static void unlock_card(struct isi_board *card)
unlock_card(card);
}
-
-/*
- * Firmware loader driver specific routines. This needs to mostly die
- * and be replaced with request_firmware.
- */
-
-static struct file_operations ISILoad_fops = {
- .owner = THIS_MODULE,
- .ioctl = ISILoad_ioctl,
-};
-
-static struct miscdevice isiloader_device = {
- ISILOAD_MISC_MINOR, "isictl", &ISILoad_fops
-};
-
-
-static inline int WaitTillCardIsFree(unsigned long base)
-{
- unsigned long count=0;
- while( (!(inw(base+0xe) & 0x1)) && (count++ < 6000000));
- if (inw(base+0xe)&0x1)
- return 0;
- else
- return 1;
-}
-
-static int ISILoad_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- unsigned int card, i, j, signature, status, portcount = 0;
- unsigned long t, base;
- u16 word_count;
- bin_frame frame;
- void __user *argp = (void __user *)arg;
- /* exec_record exec_rec; */
-
- if (get_user(card, (int __user *)argp))
- return -EFAULT;
-
- if (card < 0 || card >= BOARD_COUNT)
- return -ENXIO;
-
- base=isi_card[card].base;
-
- if (base==0)
- return -ENXIO; /* disabled or not used */
-
- switch(cmd) {
- case MIOCTL_RESET_CARD:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- printk(KERN_DEBUG "ISILoad:Resetting Card%d at 0x%lx ",card+1,base);
-
- inw(base+0x8);
-
- for (t=jiffies+HZ/100;time_before(jiffies, t););
-
- outw(0,base+0x8); /* Reset */
-
- for (j=1;j<=3;j++) {
- for (t=jiffies+HZ;time_before(jiffies, t););
- printk(".");
- }
- signature=(inw(base+0x4)) & 0xff;
- if (isi_card[card].isa) {
-
- if (!(inw(base+0xe) & 0x1) || (inw(base+0x2))) {
-#ifdef ISICOM_DEBUG
- printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
-#endif
- printk("\nISILoad:ISA Card%d reset failure (Possible bad I/O Port Address 0x%lx).\n",card+1,base);
- return -EIO;
- }
- }
- else {
- portcount = inw(base+0x2);
- if (!(inw(base+0xe) & 0x1) || ((portcount!=0) && (portcount!=4) && (portcount!=8))) {
-#ifdef ISICOM_DEBUG
- printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
-#endif
- printk("\nISILoad:PCI Card%d reset failure (Possible bad I/O Port Address 0x%lx).\n",card+1,base);
- return -EIO;
- }
- }
- switch(signature) {
- case 0xa5:
- case 0xbb:
- case 0xdd:
- if (isi_card[card].isa)
- isi_card[card].port_count = 8;
- else {
- if (portcount == 4)
- isi_card[card].port_count = 4;
- else
- isi_card[card].port_count = 8;
- }
- isi_card[card].shift_count = 12;
- break;
-
- case 0xcc: isi_card[card].port_count = 16;
- isi_card[card].shift_count = 11;
- break;
-
- default: printk("ISILoad:Card%d reset failure (Possible bad I/O Port Address 0x%lx).\n",card+1,base);
-#ifdef ISICOM_DEBUG
- printk("Sig=0x%x\n",signature);
-#endif
- return -EIO;
- }
- printk("-Done\n");
- return put_user(signature,(unsigned __user *)argp);
-
- case MIOCTL_LOAD_FIRMWARE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&frame, argp, sizeof(bin_frame)))
- return -EFAULT;
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf0,base); /* start upload sequence */
- outw(0x00,base);
- outw((frame.addr), base); /* lsb of adderess */
-
- word_count=(frame.count >> 1) + frame.count % 2;
- outw(word_count, base);
- InterruptTheCard(base);
-
- for (i=0;i<=0x2f;i++); /* a wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_WARNING "ISILoad:Card%d rejected load header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
- card+1, frame.addr, frame.count, status);
- return -EIO;
- }
- outsw(base, (void *) frame.bin_data, word_count);
-
- InterruptTheCard(base);
-
- for (i=0;i<=0x0f;i++); /* another wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_ERR "ISILoad:Card%d got out of sync.Card Status:0x%x\n",card+1, status);
- return -EIO;
- }
- return 0;
-
- case MIOCTL_READ_FIRMWARE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&frame, argp, sizeof(bin_header)))
- return -EFAULT;
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf1,base); /* start download sequence */
- outw(0x00,base);
- outw((frame.addr), base); /* lsb of adderess */
-
- word_count=(frame.count >> 1) + frame.count % 2;
- outw(word_count+1, base);
- InterruptTheCard(base);
-
- for (i=0;i<=0xf;i++); /* a wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_WARNING "ISILoad:Card%d rejected verify header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
- card+1, frame.addr, frame.count, status);
- return -EIO;
- }
-
- inw(base);
- insw(base, frame.bin_data, word_count);
- InterruptTheCard(base);
-
- for (i=0;i<=0x0f;i++); /* another wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_ERR "ISILoad:Card%d verify got out of sync.Card Status:0x%x\n",card+1, status);
- return -EIO;
- }
-
- if (copy_to_user(argp, &frame, sizeof(bin_frame)))
- return -EFAULT;
- return 0;
-
- case MIOCTL_XFER_CTRL:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf2, base);
- outw(0x800, base);
- outw(0x0, base);
- outw(0x0, base);
- InterruptTheCard(base);
- outw(0x0, base+0x4); /* for ISI4608 cards */
-
- isi_card[card].status |= FIRMWARE_LOADED;
- return 0;
-
- default:
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISILoad: Received Ioctl cmd 0x%x.\n", cmd);
-#endif
- return -ENOIOCTLCMD;
- }
-}
-
-
/*
* ISICOM Driver specific routines ...
*
residue = NO;
wrd = 0;
while (1) {
- cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE - port->xmit_tail));
+ cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
+ - port->xmit_tail));
if (residue == YES) {
residue = NO;
if (cnt > 0) {
- wrd |= (port->xmit_buf[port->xmit_tail] << 8);
- port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
+ wrd |= (port->xmit_buf[port->xmit_tail]
+ << 8);
+ port->xmit_tail = (port->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
txcount--;
cnt--;
outw(wrd, base);
- }
- else {
+ } else {
outw(wrd, base);
break;
}
}
if (cnt <= 0) break;
word_count = cnt >> 1;
- outsw(base, port->xmit_buf+port->xmit_tail, word_count);
- port->xmit_tail = (port->xmit_tail + (word_count << 1)) &
- (SERIAL_XMIT_SIZE - 1);
+ outsw(base, port->xmit_buf+port->xmit_tail,word_count);
+ port->xmit_tail = (port->xmit_tail
+ + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
txcount -= (word_count << 1);
port->xmit_cnt -= (word_count << 1);
if (cnt & 0x0001) {
residue = YES;
wrd = port->xmit_buf[port->xmit_tail];
- port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
+ port->xmit_tail = (port->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
txcount--;
}
/* Interrupt handlers */
-static void isicom_bottomhalf(void *data)
+static void isicom_bottomhalf(struct work_struct *work)
{
- struct isi_port *port = (struct isi_port *) data;
+ struct isi_port *port = container_of(work, struct isi_port, bh_tqueue);
struct tty_struct *tty = port->tty;
if (!tty)
* Main interrupt handler routine
*/
-static irqreturn_t isicom_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t isicom_interrupt(int irq, void *dev_id)
{
struct isi_board *card = dev_id;
struct isi_port *port;
base = card->base;
spin_lock(&card->card_lock);
- if (card->isa == NO) {
- /*
- * disable any interrupts from the PCI card and lower the
- * interrupt line
- */
- outw(0x8000, base+0x04);
- ClearInterrupt(base);
- }
+ /*
+ * disable any interrupts from the PCI card and lower the
+ * interrupt line
+ */
+ outw(0x8000, base+0x04);
+ ClearInterrupt(base);
inw(base); /* get the dummy word out */
header = inw(base);
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): %d(channel) > port_count.\n",
- base, channel+1);
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
+ "%d(channel) > port_count.\n", base, channel+1);
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
port = card->ports + channel;
if (!(port->flags & ASYNC_INITIALIZED)) {
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
return IRQ_HANDLED;
}
}
if (byte_count & 0x01)
inw(base);
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
header = inw(base);
switch(header & 0xff) {
case 0: /* Change in EIA signals */
-
if (port->flags & ASYNC_CHECK_CD) {
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
- pr_dbg("interrupt: DCD->low.\n");
+ pr_dbg("interrupt: DCD->low.\n"
+ );
port->status &= ~ISI_DCD;
schedule_work(&port->hangup_tq);
}
+ } else if (header & ISI_DCD) {
+ /* Carrier has been detected */
+ pr_dbg("interrupt: DCD->high.\n");
+ port->status |= ISI_DCD;
+ wake_up_interruptible(&port->open_wait);
}
- else {
- if (header & ISI_DCD) {
- /* Carrier has been detected */
- pr_dbg("interrupt: DCD->high.\n");
- port->status |= ISI_DCD;
- wake_up_interruptible(&port->open_wait);
- }
- }
- }
- else {
+ } else {
if (header & ISI_DCD)
port->status |= ISI_DCD;
else
if (header & ISI_CTS) {
port->tty->hw_stopped = 0;
/* start tx ing */
- port->status |= (ISI_TXOK | ISI_CTS);
+ port->status |= (ISI_TXOK
+ | ISI_CTS);
schedule_work(&port->bh_tqueue);
}
+ } else if (!(header & ISI_CTS)) {
+ port->tty->hw_stopped = 1;
+ /* stop tx ing */
+ port->status &= ~(ISI_TXOK | ISI_CTS);
}
- else {
- if (!(header & ISI_CTS)) {
- port->tty->hw_stopped = 1;
- /* stop tx ing */
- port->status &= ~(ISI_TXOK | ISI_CTS);
- }
- }
- }
- else {
+ } else {
if (header & ISI_CTS)
port->status |= ISI_CTS;
else
break;
- case 1: /* Received Break !!! */
+ case 1: /* Received Break !!! */
tty_insert_flip_char(tty, 0, TTY_BREAK);
if (port->flags & ASYNC_SAK)
do_SAK(tty);
pr_dbg("Intr: Unknown code in status packet.\n");
break;
}
- }
- else { /* Data Packet */
+ } else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
insw(base, rp, word_count);
byte_count -= (word_count << 1);
if (count & 0x0001) {
- tty_insert_flip_char(tty, inw(base) & 0xff, TTY_NORMAL);
+ tty_insert_flip_char(tty, inw(base) & 0xff,
+ TTY_NORMAL);
byte_count -= 2;
}
if (byte_count > 0) {
}
tty_flip_buffer_push(tty);
}
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
+
return IRQ_HANDLED;
}
return 0;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp, struct isi_port *port)
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct isi_port *port)
{
struct isi_board *card = port->card;
int do_clocal = 0, retval;
/* if non-blocking mode is set ... */
- if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
pr_dbg("block_til_ready: non-block mode.\n");
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
card->count = 0;
}
- /* last port was closed , shutdown that boad too */
+ /* last port was closed, shutdown that boad too */
if (C_HUPCL(tty)) {
if (!card->count)
isicom_shutdown_board(card);
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
+ struct isi_board *card;
unsigned long flags;
if (!port)
return;
+ card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_close"))
return;
}
if (tty->count == 1 && port->count != 1) {
- printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port count"
- "tty->count = 1 port count = %d.\n",
+ printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
+ "count tty->count = 1 port count = %d.\n",
card->base, port->count);
port->count = 1;
}
if (--port->count < 0) {
- printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port count for"
- "channel%d = %d", card->base, port->channel,
+ printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
+ "count for channel%d = %d", card->base, port->channel,
port->count);
port->count = 0;
}
spin_unlock_irqrestore(&card->card_lock, flags);
if (port->close_delay) {
pr_dbg("scheduling until time out.\n");
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
+ msleep_interruptible(
+ jiffies_to_msecs(port->close_delay));
}
spin_lock_irqsave(&card->card_lock, flags);
wake_up_interruptible(&port->open_wait);
if (isicom_paranoia_check(port, tty->name, "isicom_write"))
return 0;
- if (!tty || !port->xmit_buf)
+ if (!port->xmit_buf)
return 0;
spin_lock_irqsave(&card->card_lock, flags);
while(1) {
- cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
+ cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
+ - 1, SERIAL_XMIT_SIZE - port->xmit_head));
if (cnt <= 0)
break;
memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
- port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE - 1);
+ port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
+ - 1);
port->xmit_cnt += cnt;
buf += cnt;
count -= cnt;
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
return;
- if (!tty || !port->xmit_buf)
+ if (!port->xmit_buf)
return;
spin_lock_irqsave(&card->card_lock, flags);
if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
return;
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !port->xmit_buf)
+ if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !port->xmit_buf)
return;
/* this tells the transmitter to consider this port for
}
/* ioctl et all */
-static inline void isicom_send_break(struct isi_port *port, unsigned long length)
+static inline void isicom_send_break(struct isi_port *port,
+ unsigned long length)
{
struct isi_board *card = port->card;
unsigned long base = card->base;
return 0;
case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
+ return put_user(C_CLOCAL(tty) ? 1 : 0,
+ (unsigned long __user *)argp);
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned long __user *) argp))
/* set_termios et all */
static void isicom_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct isi_port *port = tty->driver_data;
}
/* hangup et all */
-static void do_isicom_hangup(void *data)
+static void do_isicom_hangup(struct work_struct *work)
{
- struct isi_port *port = data;
+ struct isi_port *port = container_of(work, struct isi_port, hangup_tq);
struct tty_struct *tty;
tty = port->tty;
* Driver init and deinit functions
*/
-static int __devinit isicom_register_ioregion(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return -EINVAL;
-
- if (!request_region(board->base, 16, ISICOM_NAME)) {
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
- "will be disabled.\n", board->base, board->base + 15,
- index + 1);
- return -EBUSY;
- }
-
- return 0;
-}
-
-static void isicom_unregister_ioregion(struct pci_dev *pdev)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return;
-
- release_region(board->base, 16);
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx released.\n",
- board->base, board->base + 15);
- board->base = 0;
-}
-
-static struct tty_operations isicom_ops = {
+static const struct tty_operations isicom_ops = {
.open = isicom_open,
.close = isicom_close,
.write = isicom_write,
.tiocmset = isicom_tiocmset,
};
-static int __devinit isicom_register_tty_driver(void)
-{
- int error = -ENOMEM;
-
- /* tty driver structure initialization */
- isicom_normal = alloc_tty_driver(PORT_COUNT);
- if (!isicom_normal)
- goto end;
-
- isicom_normal->owner = THIS_MODULE;
- isicom_normal->name = "ttyM";
- isicom_normal->devfs_name = "isicom/";
- isicom_normal->major = ISICOM_NMAJOR;
- isicom_normal->minor_start = 0;
- isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
- isicom_normal->subtype = SERIAL_TYPE_NORMAL;
- isicom_normal->init_termios = tty_std_termios;
- isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- isicom_normal->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(isicom_normal, &isicom_ops);
-
- if ((error = tty_register_driver(isicom_normal))) {
- pr_dbg("Couldn't register the dialin driver, error=%d\n",
- error);
- put_tty_driver(isicom_normal);
- }
-end:
- return error;
-}
-
-static void isicom_unregister_tty_driver(void)
-{
- int error;
-
- if ((error = tty_unregister_driver(isicom_normal)))
- pr_dbg("couldn't unregister normal driver, error=%d.\n", error);
-
- put_tty_driver(isicom_normal);
-}
-
-static int __devinit isicom_register_isr(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- unsigned long irqflags = SA_INTERRUPT;
- int retval = -EINVAL;
-
- if (!board->base)
- goto end;
-
- if (board->isa == NO)
- irqflags |= SA_SHIRQ;
-
- retval = request_irq(board->irq, isicom_interrupt, irqflags,
- ISICOM_NAME, board);
- if (retval < 0)
- dev_warn(&pdev->dev, "Could not install handler at Irq %d. "
- "Card%d will be disabled.\n", board->irq, index + 1);
- else
- retval = 0;
-end:
- return retval;
-}
-
static int __devinit reset_card(struct pci_dev *pdev,
const unsigned int card, unsigned int *signature)
{
*signature = inw(base + 0x4) & 0xff;
- if (board->isa == YES) {
- if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
- } else {
- portcount = inw(base + 0x2);
- if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
- (portcount != 4) && (portcount != 8))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
+ portcount = inw(base + 0x2);
+ if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
+ (portcount != 4) && (portcount != 8))) {
+ dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
+ inw(base + 0x2), inw(base + 0xe));
+ dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
+ "(Possible bad I/O Port Address 0x%lx).\n",
+ card + 1, base);
+ retval = -EIO;
+ goto end;
}
switch (*signature) {
case 0xa5:
case 0xbb:
case 0xdd:
- board->port_count = (board->isa == NO && portcount == 4) ? 4 :
- 8;
+ board->port_count = (portcount == 4) ? 4 : 8;
board->shift_count = 12;
break;
case 0xcc:
return retval;
}
+static inline int WaitTillCardIsFree(u16 base)
+{
+ unsigned long count = 0;
+
+ while (!(inw(base + 0xe) & 0x1) && count++ < 100)
+ msleep(5);
+
+ return !(inw(base + 0xe) & 0x1);
+}
+
+static int __devinit load_firmware(struct pci_dev *pdev,
+ const unsigned int index, const unsigned int signature)
+{
+ struct isi_board *board = pci_get_drvdata(pdev);
+ const struct firmware *fw;
+ unsigned long base = board->base;
+ unsigned int a;
+ u16 word_count, status;
+ int retval = -EIO;
+ char *name;
+ u8 *data;
+
+ struct stframe {
+ u16 addr;
+ u16 count;
+ u8 data[0];
+ } *frame;
+
+ switch (signature) {
+ case 0xa5:
+ name = "isi608.bin";
+ break;
+ case 0xbb:
+ name = "isi608em.bin";
+ break;
+ case 0xcc:
+ name = "isi616em.bin";
+ break;
+ case 0xdd:
+ name = "isi4608.bin";
+ break;
+ case 0xee:
+ name = "isi4616.bin";
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown signature.\n");
+ goto end;
+ }
+
+ retval = request_firmware(&fw, name, &pdev->dev);
+ if (retval)
+ goto end;
+
+ retval = -EIO;
+
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf0, base); /* start upload sequence */
+ outw(0x00, base);
+ outw(frame->addr, base); /* lsb of address */
+
+ word_count = frame->count / 2 + frame->count % 2;
+ outw(word_count, base);
+ InterruptTheCard(base);
+
+ udelay(100); /* 0x2f */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ if ((status = inw(base + 0x4)) != 0) {
+ dev_warn(&pdev->dev, "Card%d rejected load header:\n"
+ "Address:0x%x\nCount:0x%x\nStatus:0x%x\n",
+ index + 1, frame->addr, frame->count, status);
+ goto errrelfw;
+ }
+ outsw(base, frame->data, word_count);
+
+ InterruptTheCard(base);
+
+ udelay(50); /* 0x0f */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ if ((status = inw(base + 0x4)) != 0) {
+ dev_err(&pdev->dev, "Card%d got out of sync.Card "
+ "Status:0x%x\n", index + 1, status);
+ goto errrelfw;
+ }
+ }
+
+/* XXX: should we test it by reading it back and comparing with original like
+ * in load firmware package? */
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf1, base); /* start download sequence */
+ outw(0x00, base);
+ outw(frame->addr, base); /* lsb of address */
+
+ word_count = (frame->count >> 1) + frame->count % 2;
+ outw(word_count + 1, base);
+ InterruptTheCard(base);
+
+ udelay(50); /* 0xf */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ if ((status = inw(base + 0x4)) != 0) {
+ dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
+ "Address:0x%x\nCount:0x%x\nStatus: 0x%x\n",
+ index + 1, frame->addr, frame->count, status);
+ goto errrelfw;
+ }
+
+ data = kmalloc(word_count * 2, GFP_KERNEL);
+ inw(base);
+ insw(base, data, word_count);
+ InterruptTheCard(base);
+
+ for (a = 0; a < frame->count; a++)
+ if (data[a] != frame->data[a]) {
+ kfree(data);
+ dev_err(&pdev->dev, "Card%d, firmware upload "
+ "failed\n", index + 1);
+ goto errrelfw;
+ }
+ kfree(data);
+
+ udelay(50); /* 0xf */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ if ((status = inw(base + 0x4)) != 0) {
+ dev_err(&pdev->dev, "Card%d verify got out of sync. "
+ "Card Status:0x%x\n", index + 1, status);
+ goto errrelfw;
+ }
+ }
+
+ /* xfer ctrl */
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf2, base);
+ outw(0x800, base);
+ outw(0x0, base);
+ outw(0x0, base);
+ InterruptTheCard(base);
+ outw(0x0, base + 0x4); /* for ISI4608 cards */
+
+ board->status |= FIRMWARE_LOADED;
+ retval = 0;
+
+errrelfw:
+ release_firmware(fw);
+end:
+ return retval;
+}
+
/*
* Insmod can set static symbols so keep these static
*/
-static int io[4];
-static int irq[4];
static int card;
static int __devinit isicom_probe(struct pci_dev *pdev,
board->base = ioaddr;
board->irq = pciirq;
- board->isa = NO;
card++;
pci_set_drvdata(pdev, board);
- retval = isicom_register_ioregion(pdev, index);
- if (retval < 0)
+ if (!request_region(board->base, 16, ISICOM_NAME)) {
+ dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
+ "will be disabled.\n", board->base, board->base + 15,
+ index + 1);
+ retval = -EBUSY;
goto err;
+ }
- retval = isicom_register_isr(pdev, index);
- if (retval < 0)
+ retval = request_irq(board->irq, isicom_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ if (retval < 0) {
+ dev_err(&pdev->dev, "Could not install handler at Irq %d. "
+ "Card%d will be disabled.\n", board->irq, index + 1);
goto errunrr;
+ }
retval = reset_card(pdev, index, &signature);
if (retval < 0)
goto errunri;
+ retval = load_firmware(pdev, index, signature);
+ if (retval < 0)
+ goto errunri;
+
return 0;
errunri:
free_irq(board->irq, board);
errunrr:
- isicom_unregister_ioregion(pdev);
+ release_region(board->base, 16);
err:
board->base = 0;
return retval;
struct isi_board *board = pci_get_drvdata(pdev);
free_irq(board->irq, board);
- isicom_unregister_ioregion(pdev);
+ release_region(board->base, 16);
}
-static int __devinit isicom_setup(void)
+static int __init isicom_init(void)
{
int retval, idx, channel;
struct isi_port *port;
card = 0;
- memset(isi_ports, 0, sizeof(isi_ports));
for(idx = 0; idx < BOARD_COUNT; idx++) {
port = &isi_ports[idx * 16];
port->channel = channel;
port->close_delay = 50 * HZ/100;
port->closing_wait = 3000 * HZ/100;
- INIT_WORK(&port->hangup_tq, do_isicom_hangup, port);
- INIT_WORK(&port->bh_tqueue, isicom_bottomhalf, port);
+ INIT_WORK(&port->hangup_tq, do_isicom_hangup);
+ INIT_WORK(&port->bh_tqueue, isicom_bottomhalf);
port->status = 0;
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
}
isi_card[idx].base = 0;
isi_card[idx].irq = 0;
-
- if (!io[idx])
- continue;
-
- if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4 ||
- irq[idx] == 5 || irq[idx] == 7 ||
- irq[idx] == 10 || irq[idx] == 11 ||
- irq[idx] == 12 || irq[idx] == 15) {
- printk(KERN_ERR "ISICOM: ISA not supported yet.\n");
- retval = -EINVAL;
- goto error;
- } else
- printk(KERN_ERR "ISICOM: Irq %d unsupported. "
- "Disabling Card%d...\n", irq[idx], idx + 1);
}
- retval = isicom_register_tty_driver();
- if (retval < 0)
+ /* tty driver structure initialization */
+ isicom_normal = alloc_tty_driver(PORT_COUNT);
+ if (!isicom_normal) {
+ retval = -ENOMEM;
goto error;
+ }
+
+ isicom_normal->owner = THIS_MODULE;
+ isicom_normal->name = "ttyM";
+ isicom_normal->major = ISICOM_NMAJOR;
+ isicom_normal->minor_start = 0;
+ isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
+ isicom_normal->subtype = SERIAL_TYPE_NORMAL;
+ isicom_normal->init_termios = tty_std_termios;
+ isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
+ isicom_normal->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(isicom_normal, &isicom_ops);
+
+ retval = tty_register_driver(isicom_normal);
+ if (retval) {
+ pr_dbg("Couldn't register the dialin driver\n");
+ goto err_puttty;
+ }
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
- goto errtty;
+ goto err_unrtty;
}
- retval = misc_register(&isiloader_device);
- if (retval < 0)
- goto errpci;
-
init_timer(&tx);
tx.expires = jiffies + 1;
tx.data = 0;
add_timer(&tx);
return 0;
-errpci:
- pci_unregister_driver(&isicom_driver);
-errtty:
- isicom_unregister_tty_driver();
+err_unrtty:
+ tty_unregister_driver(isicom_normal);
+err_puttty:
+ put_tty_driver(isicom_normal);
error:
return retval;
}
msleep(10);
pci_unregister_driver(&isicom_driver);
- isicom_unregister_tty_driver();
+ tty_unregister_driver(isicom_normal);
+ put_tty_driver(isicom_normal);
}
-module_init(isicom_setup);
+module_init(isicom_init);
module_exit(isicom_exit);
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for the cards");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for the cards");