* 64-bit verification
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#define InterruptTheCard(base) outw(0, (base) + 0xc)
#define ClearInterrupt(base) inw((base) + 0x0a)
-#define pr_dbg(str...) pr_debug("ISICOM: " str)
#ifdef DEBUG
#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
#else
spin_unlock_irqrestore(&card->card_lock, card->flags);
msleep(10);
}
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
- card->base);
+ pr_warning("Failed to lock Card (0x%lx)\n", card->base);
return 0; /* Failed to acquire the card! */
}
char *name, const char *routine)
{
if (!port) {
- printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
+ name, routine);
return 1;
}
if (port->magic != ISICOM_MAGIC) {
- printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
+ name, routine);
return 1;
}
if (!(inw(base + 0x02) & (1 << port->channel)))
continue;
- pr_dbg("txing %d bytes, port%d.\n", txcount,
- port->channel + 1);
+ pr_debug("txing %d bytes, port%d.\n",
+ txcount, port->channel + 1);
outw((port->channel << isi_card[card].shift_count) | txcount,
base);
residue = NO;
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
- "%d(channel) > port_count.\n", base, channel+1);
+ pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
+ __func__, base, channel+1);
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
- pr_dbg("interrupt: DCD->low.\n"
- );
+ pr_debug("%s: DCD->low.\n",
+ __func__);
port->status &= ~ISI_DCD;
tty_hangup(tty);
}
} else if (header & ISI_DCD) {
/* Carrier has been detected */
- pr_dbg("interrupt: DCD->high.\n");
+ pr_debug("%s: DCD->high.\n",
+ __func__);
port->status |= ISI_DCD;
wake_up_interruptible(&port->port.open_wait);
}
break;
case 2: /* Statistics */
- pr_dbg("isicom_interrupt: stats!!!.\n");
+ pr_debug("%s: stats!!!\n", __func__);
break;
default:
- pr_dbg("Intr: Unknown code in status packet.\n");
+ pr_debug("%s: Unknown code in status packet.\n",
+ __func__);
break;
}
} else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
- pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
+ pr_debug("%s: Can rx %d of %d bytes.\n",
+ __func__, count, byte_count);
word_count = count >> 1;
insw(base, rp, word_count);
byte_count -= (word_count << 1);
byte_count -= 2;
}
if (byte_count > 0) {
- pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
- "bytes...\n", base, channel + 1);
+ pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
+ __func__, base, channel + 1);
/* drain out unread xtra data */
while (byte_count > 0) {
inw(base);
{
int channel;
struct isi_port *port;
- unsigned long flags;
- spin_lock_irqsave(&bp->card_lock, flags);
- if (bp->status & BOARD_ACTIVE) {
- spin_unlock_irqrestore(&bp->card_lock, flags);
- return;
+ bp->count++;
+ if (!(bp->status & BOARD_INIT)) {
+ port = bp->ports;
+ for (channel = 0; channel < bp->port_count; channel++, port++)
+ drop_dtr_rts(port);
}
- port = bp->ports;
- bp->status |= BOARD_ACTIVE;
- for (channel = 0; channel < bp->port_count; channel++, port++)
- drop_dtr_rts(port);
- spin_unlock_irqrestore(&bp->card_lock, flags);
+ bp->status |= BOARD_ACTIVE | BOARD_INIT;
}
-static int isicom_setup_port(struct tty_struct *tty)
+/* Activate and thus setup board are protected from races against shutdown
+ by the tty_port mutex */
+
+static int isicom_activate(struct tty_port *tport, struct tty_struct *tty)
{
- struct isi_port *port = tty->driver_data;
+ struct isi_port *port = container_of(tport, struct isi_port, port);
struct isi_board *card = port->card;
unsigned long flags;
- if (port->port.flags & ASYNC_INITIALIZED)
- return 0;
- if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ if (tty_port_alloc_xmit_buf(tport) < 0)
return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- clear_bit(TTY_IO_ERROR, &tty->flags);
- if (port->port.count == 1)
- card->count++;
+ isicom_setup_board(card);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
InterruptTheCard(card->base);
}
-
isicom_config_port(tty);
- port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
return (ip->status & ISI_DCD)?1 : 0;
}
-static int isicom_open(struct tty_struct *tty, struct file *filp)
+static struct tty_port *isicom_find_port(struct tty_struct *tty)
{
struct isi_port *port;
struct isi_board *card;
unsigned int board;
- int error, line;
+ int line = tty->index;
- line = tty->index;
if (line < 0 || line > PORT_COUNT-1)
- return -ENODEV;
+ return NULL;
board = BOARD(line);
card = &isi_card[board];
if (!(card->status & FIRMWARE_LOADED))
- return -ENODEV;
+ return NULL;
/* open on a port greater than the port count for the card !!! */
if (line > ((board * 16) + card->port_count - 1))
- return -ENODEV;
+ return NULL;
port = &isi_ports[line];
if (isicom_paranoia_check(port, tty->name, "isicom_open"))
- return -ENODEV;
+ return NULL;
- isicom_setup_board(card);
+ return &port->port;
+}
+
+static int isicom_open(struct tty_struct *tty, struct file *filp)
+{
+ struct isi_port *port;
+ struct isi_board *card;
+ struct tty_port *tport;
+
+ tport = isicom_find_port(tty);
+ if (tport == NULL)
+ return -ENODEV;
+ port = container_of(tport, struct isi_port, port);
- /* FIXME: locking on port.count etc */
- port->port.count++;
tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
- error = isicom_setup_port(tty);
- if (error == 0)
- error = tty_port_block_til_ready(&port->port, tty, filp);
- return error;
+ return tty_port_open(tport, tty, filp);
}
/* close et all */
-static inline void isicom_shutdown_board(struct isi_board *bp)
-{
- if (bp->status & BOARD_ACTIVE)
- bp->status &= ~BOARD_ACTIVE;
-}
-
/* card->lock HAS to be held */
static void isicom_shutdown_port(struct isi_port *port)
{
struct isi_board *card = port->card;
- struct tty_struct *tty;
-
- tty = tty_port_tty_get(&port->port);
-
- if (!(port->port.flags & ASYNC_INITIALIZED)) {
- tty_kref_put(tty);
- return;
- }
-
- tty_port_free_xmit_buf(&port->port);
- port->port.flags &= ~ASYNC_INITIALIZED;
- /* 3rd October 2000 : Vinayak P Risbud */
- tty_port_tty_set(&port->port, NULL);
-
- /*Fix done by Anil .S on 30-04-2001
- remote login through isi port has dtr toggle problem
- due to which the carrier drops before the password prompt
- appears on the remote end. Now we drop the dtr only if the
- HUPCL(Hangup on close) flag is set for the tty*/
-
- if (C_HUPCL(tty))
- /* drop dtr on this port */
- drop_dtr(port);
-
- /* any other port uninits */
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
if (--card->count < 0) {
- pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
- card->base, card->count);
+ pr_debug("%s: bad board(0x%lx) count %d.\n",
+ __func__, card->base, card->count);
card->count = 0;
}
-
- /* last port was closed, shutdown that boad too */
- if (C_HUPCL(tty)) {
- if (!card->count)
- isicom_shutdown_board(card);
- }
- tty_kref_put(tty);
+ /* last port was closed, shutdown that board too */
+ if (!card->count)
+ card->status &= BOARD_ACTIVE;
}
static void isicom_flush_buffer(struct tty_struct *tty)
tty_wakeup(tty);
}
-static void isicom_close_port(struct tty_port *port)
+static void isicom_shutdown(struct tty_port *port)
{
struct isi_port *ip = container_of(port, struct isi_port, port);
struct isi_board *card = ip->card;
/* indicate to the card that no more data can be received
on this port */
spin_lock_irqsave(&card->card_lock, flags);
- if (port->flags & ASYNC_INITIALIZED) {
- card->port_status &= ~(1 << ip->channel);
- outw(card->port_status, card->base + 0x02);
- }
+ card->port_status &= ~(1 << ip->channel);
+ outw(card->port_status, card->base + 0x02);
isicom_shutdown_port(ip);
spin_unlock_irqrestore(&card->card_lock, flags);
+ tty_port_free_xmit_buf(port);
}
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *ip = tty->driver_data;
- struct tty_port *port = &ip->port;
- if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
+ struct tty_port *port;
+
+ if (ip == NULL)
return;
- if (tty_port_close_start(port, tty, filp) == 0)
+ port = &ip->port;
+ if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
return;
- isicom_close_port(port);
- isicom_flush_buffer(tty);
- tty_port_close_end(port, tty);
+ tty_port_close(port, tty, filp);
}
/* write et all */
static void isicom_hangup(struct tty_struct *tty)
{
struct isi_port *port = tty->driver_data;
- unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
return;
-
- spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_shutdown_port(port);
- spin_unlock_irqrestore(&port->card->card_lock, flags);
-
tty_port_hangup(&port->port);
}
static const struct tty_port_operations isicom_port_ops = {
.carrier_raised = isicom_carrier_raised,
.dtr_rts = isicom_dtr_rts,
+ .activate = isicom_activate,
+ .shutdown = isicom_shutdown,
};
static int __devinit reset_card(struct pci_dev *pdev,
dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
/* allot the first empty slot in the array */
- for (index = 0; index < BOARD_COUNT; index++)
+ for (index = 0; index < BOARD_COUNT; index++) {
if (isi_card[index].base == 0) {
board = &isi_card[index];
break;
}
+ }
+ if (index == BOARD_COUNT) {
+ retval = -ENODEV;
+ goto err_disable;
+ }
board->index = index;
board->base = pci_resource_start(pdev, 3);
errdec:
board->base = 0;
card_count--;
+err_disable:
pci_disable_device(pdev);
err:
return retval;
retval = tty_register_driver(isicom_normal);
if (retval) {
- pr_dbg("Couldn't register the dialin driver\n");
+ pr_debug("Couldn't register the dialin driver\n");
goto err_puttty;
}
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
- printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
+ pr_err("Unable to register pci driver.\n");
goto err_unrtty;
}
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("isi608.bin");
+MODULE_FIRMWARE("isi608em.bin");
+MODULE_FIRMWARE("isi616em.bin");
+MODULE_FIRMWARE("isi4608.bin");
+MODULE_FIRMWARE("isi4616.bin");